|
1)
Message boards :
Questions and problems :
boincmgr and libwx_gtk2u_html-2.8.so.0 => not found
(Message 76490)
Posted 16 Mar 2017 by Claggy Post: From Software prerequisites (Unix/Linux): http://boinc.berkeley.edu/trac/wiki/SoftwarePrereqsUnix since 7.4.0: ​wxWidgets 3.0.0 Try sudo apt-get install libwxgtk3.0-dev libwxgtk-webview3.0-dev You'll get the dev packages too, but you'll also get the normal packages. Claggy |
|
2)
Message boards :
Android :
BOINC Android app does not work on Asus Zenphone 2
(Message 76134)
Posted 25 Feb 2017 by Claggy Post: It appears that phone doesn't have an android processor, but an Intel processor. Boinc 7.4.x for Android is supposed to work on ARM, AArch64, MIPS, MIPS64, x86, and x86_64, There is no such thing as an android processor!! Android Boinc all downloads Claggy |
|
3)
Message boards :
Android :
BOINC Android app does not work on Asus Zenphone 2
(Message 76133)
Posted 25 Feb 2017 by Claggy Post: Hello, You don't say what version of Boinc you installed, I expect Boinc 7.4.53 You can try Boinc 7.4.43 from the Berkeley site instead, you may need to run though some hoops to get it to install this way, I think Boinc 7.4.53 has some issues with x86 processors. Claggy |
|
4)
Message boards :
BOINC client :
BOINC 7 development discussion thread.
(Message 75883)
Posted 13 Feb 2017 by Claggy Post: Since it's been five months since the 7.6 head has been worked on, and it was even earlier than when Boinc 7.6.33 was tagged, I've gone and Cloned the Boinc repository, tagged a 7.6.34 release, and done a pull request back at the Boinc repository, Claggy |
|
5)
Message boards :
Questions and problems :
BOINC Manager no longer starts at computer boot.
(Message 75806)
Posted 9 Feb 2017 by Claggy Post: Yes, it is checked. Try unchecking it, Fully exiting Boinc Manager (the client can be left running), restart Boinc Manager, recheck it, Shut down Boinc fully, then restart the host and see if it works. Claggy |
|
6)
Message boards :
Questions and problems :
Controlling number of threads used by BOINC
(Message 75737)
Posted 6 Feb 2017 by Claggy Post: My CPU has 4 cores, each capable of running 2 threads for 8 in total. So a Quad core with hyperthreading, making eight cores total. My BOINC settings regarding this are: You don't say what Boinc version you run, or what website you set your preferences on, the most recent Boinc's and website preferences only have two settings: Computing Usage limits The other setting was for Boinc 5 clients, and is no longer used. And in BOINC manager: Use GPU always. Use the term 'Tasks', Boinc will run enough tasks to occupy all your CPU cores and GPUs, subject to your preferences, and the application's requirements, each application may have more than one thread running, the OS or the app will decide which cores they'll run on, Boinc can run non-intensive applications too, adding to the number of Boinc related threads running, so don't use the term threads unless you're counting them up in Task Manager or the like. Claggy |
|
7)
Message boards :
Questions and problems :
Changing from one account to another ? How ?
(Message 75565)
Posted 30 Jan 2017 by Claggy Post: In Boinc Manager, go to the projects tab, click on Seti@home, then click on Remove, Then add Seti@home again using your different account. There is a way of linking a new account, and a Seti Classic account together: http://setiathome.berkeley.edu/sah_classic.php Claggy |
|
8)
Message boards :
Android :
Android BOINC client
(Message 75554)
Posted 29 Jan 2017 by Claggy Post: On my BOINC version 7.4.41 on Android if I go to the Projects list and tap a project I get the Allow new tasks/No new tasks as an option in the menu ! And it's the same on Boinc 7.4.53 for Android. Claggy |
|
9)
Message boards :
GPUs :
clinfo.exe wrong values for CL_DEVICE_ADDRESS_BITS
(Message 75184)
Posted 10 Jan 2017 by Claggy Post: Check in %SYSTEMDRIVE%:\Windows\System32 as there may be a more up-to-date clinfo.exe in there, deposited by the Nvidia or Intel drivers. Or AMD, I'm sure it's an AMD file. Claggy |
|
10)
Message boards :
BOINC Manager :
New BOINC Interface?
(Message 74733)
Posted 11 Dec 2016 by Claggy Post: There is only one proper active Boinc Dev at the moment, as their funding ran out, and there isn't a Donate Button for Boinc development as projects have!!! So if you want this interface, you'll have to grab the source code, do the coding, then submit the changes yourself. Claggy |
|
11)
Message boards :
Questions and problems :
BOINC not uploading or downloading SETI@Home tasks
(Message 74505)
Posted 30 Nov 2016 by Claggy Post: Anything else I might look for and/or try? Try restarting any routers or hubs or switches that the probmatic host is connected to. Claggy |
|
12)
Message boards :
Questions and problems :
app_config.xml
(Message 72911)
Posted 4 Oct 2016 by Claggy Post: Where does this file reside in MacOS? In the project directory of each project that you have created it in, If you haven't created any then you won't have any. Claggy |
|
13)
Message boards :
Android :
No New Tasks after completing several task sets
(Message 70661)
Posted 3 Jul 2016 by Claggy Post: it is just the Android 6.0.1 that is being troublesome. What Boinc version?, and what does the Boinc startup say in the Event Log? Claggy |
|
14)
Message boards :
Questions and problems :
Remaining estimated (time) doubles during run
(Message 70544)
Posted 28 Jun 2016 by Claggy Post: We need dcf at app level... something asked for since years, to return the client side buffer estimation functionality. The Dev's said it couldn't or wouldn't be done, Jason G went and did an experimental Boinc 6.10.58 with it implemented, worked fine, Dev's still weren't interested. Claggy |
|
15)
Message boards :
Questions and problems :
Remaining estimated (time) doubles during run
(Message 70527)
Posted 28 Jun 2016 by Claggy Post: Einstein runs old Boinc server software, it still uses 'Task duration correction factor', while other projects use 'Average processing rate', There is only one DCF per project, so each each different application type from a project bumps the runtime up or down as DCF alters, it can't be very accurate, not without a lot of project fiddling of the different task type's <rsc_fpops_est> values. Claggy |
|
16)
Message boards :
GPUs :
GPUs recognized, but no work is being assigned to them?
(Message 69107)
Posted 22 Apr 2016 by Claggy Post: 16: 22-Apr-2016 12:36:07 (low) [] calInit() returned 1 Or PrimeGrid fixes their apps to not require CAL support, or fix their planclasses to not require CAL support. Claggy |
|
17)
Message boards :
Questions and problems :
Nvidia gpu not found
(Message 69078)
Posted 19 Apr 2016 by Claggy Post: Can someone point me in the correct direction to troubleshoot ? First of all please say what OS this is on, Windows, OS X, or Linux, Actually posting the Boinc startup helps. When requesting help on these forums. Claggy |
|
18)
Message boards :
Questions and problems :
Multibrand GPUs BOINC Manager confused
(Message 69077)
Posted 19 Apr 2016 by Claggy Post: Few weeks past, I tried GPUGRID for secondary GPU. As long as I resume GPUGRID, BM stops getting works for Collatz, when I suspend GPUGRID, BM starts getting tasks for Collatz. After restart I get vice versa results, but BM should be controlled manually to get works for both GPUs! The main purpose of BOINC manager is to manage works automatically, instead I need to control it manually. Boinc Manager is the GUI, With it, you view and control what the Boinc Client does, nothing more, What you're effectively saying is (using a example) 'My House is cold, i can't get it lit', when you mean to say is 'My house is cold, i can't get the fire/boiler lit' Claggy |
|
19)
Message boards :
BOINC Manager :
BUG: Windows: Please fix Sys Tray Icon -- no right-click menu
(Message 66683)
Posted 8 Jan 2016 by Claggy Post: What version of Boinc? Claggy |
|
20)
Message boards :
GPUs :
Help Request: GPU Detection and GFLOPs
(Message 66655)
Posted 8 Jan 2016 by Claggy Post: Before: 08-Jan-2016 04:55:48 [---] Starting BOINC client version 7.6.22 for windows_x86_64 Afterwards: 08/01/2016 04:59:57 | | Starting BOINC client version 7.7.0 for windows_x86_64 Claggy |
Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation.