Posts by Tom M

Info	Message
21) Message boards : BOINC client : Amd OCL2 and OCL1.2 drivers won't co-exist on Boinc Manager but seems to work elsewhere Message 99279 Posted 13 Jun 2020 by Tom M	So you report a possible bug but don't provide any evidence (logs) and can't return to a situation in which you can get the logs. Why then report this? Also nothing in old logs in stdoutdae.txt or stdoutdae.old? Why report this? Well it is a problem and it has been replicated. I apologize for getting back so slowly. I have been struggling with a non-infectious health issue and have been very uncomfortable since Sunday morning. This morning, for the first time since Wed I seem to have gotten better. So I got up. Moved the R5700's over to my mining rack. Replicated and tested and documented everything I could think of. I am keeping the R5700's and the Rx 570's now present on the mining rack so I can do further testing as warranted or needed. 6/13/2020 about 10:00am CDT to Noon. This test was performed on an mining rack system so that the various hardware combinations where easier to make. I have previously tested (but not documented) with a Rx 570 and R5700 directly on the motherboard and had the similar "I won't play with the other OCL results. -------------------------- tom@General-Research:~/Downloads/amdgpu-pro-20.10-1048554-ubuntu-18.04$ ./amdgpu-pro-install -y --opencl=pal,legacy --headless [sudo] password for tom: deb [ trusted=yes ] file:/var/opt/amdgpu-pro-local/ ./ Get:1 file:/var/opt/amdgpu-pro-local ./ InRelease -------edit----Deleted most of this but have a full copy if I need to post it. Done. Forcing installation of amdgpu amdgpu: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/5.3.0-59-generic/updates/dkms/ amdttm.ko: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/5.3.0-59-generic/updates/dkms/ amdkcl.ko: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/5.3.0-59-generic/updates/dkms/ amd-sched.ko: Running module version sanity check. - Original module - Installation - Installing to /lib/modules/5.3.0-59-generic/updates/dkms/ depmod... Backing up initrd.img-5.3.0-59-generic to /boot/initrd.img-5.3.0-59-generic.old-dkms Making new initrd.img-5.3.0-59-generic (If next boot fails, revert to initrd.img-5.3.0-59-generic.old-dkms image) update-initramfs...... DKMS: install completed. Setting up amdgpu-pro-core (20.10-1048554) ... Setting up libdrm-amdgpu-common (1.0.0-1048554) ... Setting up libdrm2-amdgpu:amd64 (1:2.4.100-1048554) ... Setting up opencl-orca-amdgpu-pro-icd:amd64 (20.10-1048554) ... Setting up opencl-amdgpu-pro-comgr (20.10-1048554) ... Setting up libdrm-amdgpu-amdgpu1:amd64 (1:2.4.100-1048554) ... Setting up libopencl1-amdgpu-pro:amd64 (20.10-1048554) ... Setting up opencl-amdgpu-pro-icd (20.10-1048554) ... Setting up clinfo-amdgpu-pro (20.10-1048554) ... Processing triggers for libc-bin (2.27-3ubuntu1) ... tom@General-Research:~/Downloads/amdgpu-pro-20.10-1048554-ubuntu-18.04$ ---------------------------------- Log with 2 Rx 570 gpus installed with fresh install of OCL2 and OCL1.2 drivers. <<<<<<<<<<>>>>>>>>>>>>>>>>> Sat 13 Jun 2020 10:03:00 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:03:00 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:03:00 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:03:00 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:03:01 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 3849MB, 3849MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:03:01 AM CDT \| \| OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:03:01 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:03:01 AM CDT \| \| Host name: General-Research Sat 13 Jun 2020 10:03:01 AM CDT \| \| Processor: 16 AuthenticAMD AMD Ryzen 7 2700 Eight-Core Processor [Family 23 Model 8 Stepping 2] Sat 13 Jun 2020 10:03:01 AM CDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca Sat 13 Jun 2020 10:03:01 AM CDT \| \| OS: Linux Ubuntu: Ubuntu 18.04.4 LTS [5.3.0-59-generic\|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)] Sat 13 Jun 2020 10:03:01 AM CDT \| \| Memory: 15.59 GB physical, 2.00 GB virtual Sat 13 Jun 2020 10:03:01 AM CDT \| \| Disk: 77.09 GB total, 56.65 GB free Sat 13 Jun 2020 10:03:01 AM CDT \| \| Local time is UTC -5 hours Sat 13 Jun 2020 10:03:01 AM CDT \| Einstein@Home \| Found app_config.xml Sat 13 Jun 2020 10:03:01 AM CDT \| Rosetta@home \| Found app_config.xml Sat 13 Jun 2020 10:03:01 AM CDT \| Rosetta@home \| Max 4 concurrent jobs Sat 13 Jun 2020 10:03:01 AM CDT \| Einstein@Home \| hsgamma_FGRP5: Max 4 concurrent jobs Sat 13 Jun 2020 10:03:01 AM CDT \| \| Config: use all coprocessors Sat 13 Jun 2020 10:03:01 AM CDT \| \| General prefs: from http://www.worldcommunitygrid.org/ (last modified 08-Jun-2020 06:49:26) Sat 13 Jun 2020 10:03:01 AM CDT \| \| Host location: none Sat 13 Jun 2020 10:03:01 AM CDT \| \| General prefs: using your defaults Sat 13 Jun 2020 10:03:01 AM CDT \| \| Reading preferences override file Sat 13 Jun 2020 10:03:01 AM CDT \| \| Preferences: Sat 13 Jun 2020 10:03:01 AM CDT \| \| max memory usage when active: 14371.41 MB Sat 13 Jun 2020 10:03:01 AM CDT \| \| max memory usage when idle: 14371.41 MB Sat 13 Jun 2020 10:03:02 AM CDT \| \| max disk usage: 60.89 GB Sat 13 Jun 2020 10:03:02 AM CDT \| \| max CPUs used: 14 Sat 13 Jun 2020 10:03:02 AM CDT \| \| suspend work if non-BOINC CPU load exceeds 60% Sat 13 Jun 2020 10:03:02 AM CDT \| \| (to change preferences, visit a project web site or select Preferences in the Manager) Sat 13 Jun 2020 10:03:02 AM CDT \| \| Setting up project and slot directories Sat 13 Jun 2020 10:03:02 AM CDT \| \| Checking active tasks Sat 13 Jun 2020 10:03:02 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_565409_0.0_0 is 0.12 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:03:02 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_569008_0.0_0 is 0.12 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:03:02 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_573949_0.0_0 is 0.12 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:03:02 AM CDT \| Einstein@Home \| Task LATeah1026F_1368.0_67405_0.0_0 is 0.12 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:03:02 AM CDT \| Einstein@Home \| URL http://einstein.phys.uwm.edu/; Computer ID 12832207; resource share 100 Sat 13 Jun 2020 10:03:02 AM CDT \| PrimeGrid \| URL http://www.primegrid.com/; Computer ID 1005649; resource share 125 Sat 13 Jun 2020 10:03:02 AM CDT \| Rosetta@home \| URL https://boinc.bakerlab.org/rosetta/; Computer ID 4555251; resource share 100 Sat 13 Jun 2020 10:03:02 AM CDT \| \| Setting up GUI RPC socket Sat 13 Jun 2020 10:03:02 AM CDT \| \| Checking presence of 4936 project files Sat 13 Jun 2020 10:03:09 AM CDT \| Einstein@Home \| [sched_op] Starting scheduler request Sat 13 Jun 2020 10:03:09 AM CDT \| Einstein@Home \| Sending scheduler request: To report completed tasks. Sat 13 Jun 2020 10:03:09 AM CDT \| Einstein@Home \| Reporting 1 completed tasks ------------------------- Shutdown Plug in Radeon 5700 along with the two RX 570's. Boot -------------- tom@General-Research:~$ lspci \| grep -i VGA 09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 0d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 13:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) tom@General-Research:~$ --------------------------------- Sat 13 Jun 2020 10:16:18 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:16:18 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:16:18 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:16:18 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:16:19 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 3853MB, 3853MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:16:19 AM CDT \| \| OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:16:20 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:16:20 AM CDT \| \| Host name: General-Research Sat 13 Jun 2020 10:16:20 AM CDT \| \| Processor: 16 AuthenticAMD AMD Ryzen 7 2700 Eight-Core Processor [Family 23 Model 8 Stepping 2] Sat 13 Jun 2020 10:16:20 AM CDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca Sat 13 Jun 2020 10:16:20 AM CDT \| \| OS: Linux Ubuntu: Ubuntu 18.04.4 LTS [5.3.0-59-generic\|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)] Sat 13 Jun 2020 10:16:20 AM CDT \| \| Memory: 15.59 GB physical, 2.00 GB virtual Sat 13 Jun 2020 10:16:20 AM CDT \| \| Disk: 77.09 GB total, 55.91 GB free Sat 13 Jun 2020 10:16:20 AM CDT \| \| Local time is UTC -5 hours Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Found app_config.xml Sat 13 Jun 2020 10:16:20 AM CDT \| Rosetta@home \| Found app_config.xml Sat 13 Jun 2020 10:16:20 AM CDT \| Rosetta@home \| Max 4 concurrent jobs Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| hsgamma_FGRP5: Max 4 concurrent jobs Sat 13 Jun 2020 10:16:20 AM CDT \| \| Config: use all coprocessors Sat 13 Jun 2020 10:16:20 AM CDT \| \| General prefs: from http://www.worldcommunitygrid.org/ (last modified 08-Jun-2020 06:49:26) Sat 13 Jun 2020 10:16:20 AM CDT \| \| Host location: none Sat 13 Jun 2020 10:16:20 AM CDT \| \| General prefs: using your defaults Sat 13 Jun 2020 10:16:20 AM CDT \| \| Reading preferences override file Sat 13 Jun 2020 10:16:20 AM CDT \| \| Preferences: Sat 13 Jun 2020 10:16:20 AM CDT \| \| max memory usage when active: 14371.32 MB Sat 13 Jun 2020 10:16:20 AM CDT \| \| max memory usage when idle: 14371.32 MB Sat 13 Jun 2020 10:16:20 AM CDT \| \| max disk usage: 60.12 GB Sat 13 Jun 2020 10:16:20 AM CDT \| \| max CPUs used: 14 Sat 13 Jun 2020 10:16:20 AM CDT \| \| suspend work if non-BOINC CPU load exceeds 60% Sat 13 Jun 2020 10:16:20 AM CDT \| \| (to change preferences, visit a project web site or select Preferences in the Manager) Sat 13 Jun 2020 10:16:20 AM CDT \| \| Setting up project and slot directories Sat 13 Jun 2020 10:16:20 AM CDT \| \| Checking active tasks Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_569008_0.0_0 is 0.13 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_573949_0.0_0 is 0.13 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Task LATeah1026F_1368.0_67405_0.0_0 is 0.13 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| URL http://einstein.phys.uwm.edu/; Computer ID 12832207; resource share 100 Sat 13 Jun 2020 10:16:20 AM CDT \| PrimeGrid \| URL http://www.primegrid.com/; Computer ID 1005649; resource share 125 Sat 13 Jun 2020 10:16:20 AM CDT \| Rosetta@home \| URL https://boinc.bakerlab.org/rosetta/; Computer ID 4555251; resource share 100 Sat 13 Jun 2020 10:16:20 AM CDT \| \| Setting up GUI RPC socket Sat 13 Jun 2020 10:16:20 AM CDT \| \| Checking presence of 4936 project files Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Started upload of LATeah1026F_1352.0_565409_0.0_0_0 Sat 13 Jun 2020 10:16:20 AM CDT \| Einstein@Home \| Started upload of LATeah1026F_1352.0_565409_0.0_0_1 ------------------ Shutdown, unplug RX 570's, Move R5700 plug to main gpu slot. ------------ Sat 13 Jun 2020 10:24:33 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:24:33 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:24:33 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:24:33 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:24:33 AM CDT \| \| OpenCL: AMD/ATI GPU 0: AMD Radeon RX 5700 (driver version 3075.10 (PAL,LC), device version OpenCL 2.0 AMD-APP (3075.10), 8176MB, 8176MB available, 4032 GFLOPS peak) Sat 13 Jun 2020 10:24:34 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:24:34 AM CDT \| \| Host name: General-Research Sat 13 Jun 2020 10:24:34 AM CDT \| \| Processor: 16 AuthenticAMD AMD Ryzen 7 2700 Eight-Core Processor [Family 23 Model 8 Stepping 2] Sat 13 Jun 2020 10:24:34 AM CDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca Sat 13 Jun 2020 10:24:34 AM CDT \| \| OS: Linux Ubuntu: Ubuntu 18.04.4 LTS [5.3.0-59-generic\|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)] Sat 13 Jun 2020 10:24:34 AM CDT \| \| Memory: 15.59 GB physical, 2.00 GB virtual Sat 13 Jun 2020 10:24:34 AM CDT \| \| Disk: 77.09 GB total, 55.88 GB free Sat 13 Jun 2020 10:24:34 AM CDT \| \| Local time is UTC -5 hours Sat 13 Jun 2020 10:24:34 AM CDT \| Einstein@Home \| Found app_config.xml Sat 13 Jun 2020 10:24:34 AM CDT \| Rosetta@home \| Found app_config.xml Sat 13 Jun 2020 10:24:34 AM CDT \| Rosetta@home \| Max 4 concurrent jobs Sat 13 Jun 2020 10:24:34 AM CDT \| Einstein@Home \| hsgamma_FGRP5: Max 4 concurrent jobs Sat 13 Jun 2020 10:24:34 AM CDT \| \| Config: use all coprocessors Sat 13 Jun 2020 10:24:34 AM CDT \| \| General prefs: from http://www.worldcommunitygrid.org/ (last modified 08-Jun-2020 06:49:26) Sat 13 Jun 2020 10:24:34 AM CDT \| \| Host location: none Sat 13 Jun 2020 10:24:34 AM CDT \| \| General prefs: using your defaults Sat 13 Jun 2020 10:24:34 AM CDT \| \| Reading preferences override file Sat 13 Jun 2020 10:24:34 AM CDT \| \| Preferences: Sat 13 Jun 2020 10:24:34 AM CDT \| \| max memory usage when active: 14371.53 MB Sat 13 Jun 2020 10:24:34 AM CDT \| \| max memory usage when idle: 14371.53 MB Sat 13 Jun 2020 10:24:34 AM CDT \| \| max disk usage: 60.09 GB Sat 13 Jun 2020 10:24:34 AM CDT \| \| max CPUs used: 14 Sat 13 Jun 2020 10:24:34 AM CDT \| \| suspend work if non-BOINC CPU load exceeds 60% Sat 13 Jun 2020 10:24:34 AM CDT \| \| (to change preferences, visit a project web site or select Preferences in the Manager) Sat 13 Jun 2020 10:24:34 AM CDT \| \| Setting up project and slot directories Sat 13 Jun 2020 10:24:34 AM CDT \| \| Checking active tasks Sat 13 Jun 2020 10:24:34 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_569008_0.0_0 is 0.14 days overdue; you may not get credit for it. Consider aborting it. Sat 13 Jun 2020 10:24:34 AM CDT \| Einstein@Home \| Task LATeah1026F_1352.0_573949_0.0_0 is 0.14 days overdue; you may not get credit for it. Consider aborting it. ------------------------ Shutdown, plug RX570's into expansion card. Leave R5700 plugged (via Pcie to USB3 card) plugged into main slot. boot ---------------- tom@General-Research:~$ lspci \| grep -i VGA 0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) tom@General-Research:~$ -------------------- Given the above result I tried moving the #1 slot plugin to the expansion card (#1 position). I moved the RX 570's to spots 2/3 from the front of the card. -------------- tom@General-Research:~$ lspci \| grep -i VGA 0e:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) 12:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 13:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) tom@General-Research:~$ --------------------------- Ok, I have 3 cards recognized by the OS. Here goes the Boinc Manager-based test. ------------------- Sat 13 Jun 2020 10:39:05 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:39:05 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:39:05 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:39:05 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:39:05 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:39:05 AM CDT \| \| OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:39:06 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:39:06 AM CDT \| \| Host name: General-Research Sat 13 Jun 2020 10:39:06 AM CDT \| \| Processor: 16 AuthenticAMD AMD Ryzen 7 2700 Eight-Core Processor [Family 23 Model 8 Stepping 2] Sat 13 Jun 2020 10:39:06 AM CDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca Sat 13 Jun 2020 10:39:06 AM CDT \| \| OS: Linux Ubuntu: Ubuntu 18.04.4 LTS [5.3.0-59-generic\|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)] Sat 13 Jun 2020 10:39:06 AM CDT \| \| Memory: 15.59 GB physical, 2.00 GB virtual Sat 13 Jun 2020 10:39:06 AM CDT \| \| Disk: 77.09 GB total, 55.87 GB free Sat 13 Jun 2020 10:39:06 AM CDT \| \| Local time is UTC -5 hours Sat 13 Jun 2020 10:39:06 AM CDT \| Einstein@Home \| Found app_config.xml Sat 13 Jun 2020 10:39:06 AM CDT \| Rosetta@home \| Found app_config.xml Sat 13 Jun 2020 10:39:06 AM CDT \| Rosetta@home \| Max 4 concurrent jobs Sat 13 Jun 2020 10:39:06 AM CDT \| Einstein@Home \| hsgamma_FGRP5: Max 4 concurrent jobs Sat 13 Jun 2020 10:39:06 AM CDT \| \| Config: use all coprocessors Sat 13 Jun 2020 10:39:06 AM CDT \| \| General prefs: from http://www.worldcommunitygrid.org/ (last modified 08-Jun-2020 06:49:26) Sat 13 Jun 2020 10:39:06 AM CDT \| \| Host location: none Sat 13 Jun 2020 10:39:06 AM CDT \| \| General prefs: using your defaults Sat 13 Jun 2020 10:39:06 AM CDT \| \| Reading preferences override file Sat 13 Jun 2020 10:39:06 AM CDT \| \| Preferences: ------------- Lets try unplugging the RX 570's while the expansion card stays in the #3 Pcie slot. --------------- Sat 13 Jun 2020 10:45:24 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:45:24 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:45:24 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:45:24 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:45:24 AM CDT \| \| OpenCL: AMD/ATI GPU 0: AMD Radeon RX 5700 (driver version 3075.10 (PAL,LC), device version OpenCL 2.0 AMD-APP (3075.10), 8176MB, 8176MB available, 4032 GFLOPS peak) Sat 13 Jun 2020 10:45:24 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:45:24 AM CDT \| \| Host name: General-Research --------------------- Lets move the expansion card to #1 slot and plugin the RX 570's in the 2nd and 3rd positions again. ---------------------- tom@General-Research:~$ lspci \| grep -i VGA 0e:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) 12:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 13:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) tom@General-Research:~$ ---------------- Sat 13 Jun 2020 10:51:02 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:51:02 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:51:02 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:51:02 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:51:03 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:51:03 AM CDT \| \| OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:51:03 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 10:51:03 AM CDT \| \| Host name: General-Research ------------------ Lets try running the R5700 through a diferent pcie to usb3 card. -------------------- tom@General-Research:~$ lspci \| grep -i VGA 10:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 11:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 15:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) tom@General-Research:~$ -------------------------------------------------------------------------------- Sat 13 Jun 2020 10:58:48 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 10:58:48 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 10:58:48 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 10:58:48 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 10:58:49 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 3868MB, 3868MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:58:49 AM CDT \| \| OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 10:58:49 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 ----------------------- Lets try moving the video output to an Rx57 card driven off the expansi0n card in slot #1 ------------------------------------ tom@General-Research:~$ lspci \| grep -i VGA 09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 0c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) tom@General-Research:~$ ---------------------------- Sat 13 Jun 2020 11:15:57 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 11:15:57 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 11:15:57 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 11:15:57 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 11:15:57 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 3836MB, 3836MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 11:15:58 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 11:15:58 AM CDT \| \| Host name: General-Research ----------------------- For my next idea I will switch the Rx 570 from the #1 Pcie slot to the #3 Pcie slot (moving plugs). -------------- tom@General-Research:~$ lspci \| grep -i VGA 0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) 0c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) tom@General-Research:~$ ---------------------------------------------------------------------------------------------------------- Sat 13 Jun 2020 11:23:44 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 11:23:44 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 11:23:44 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 11:23:44 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4055MB, 4055MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 11:23:45 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 11:23:45 AM CDT \| \| Host name: General-Research ---- Next I will try moving the video output from Rx570 pcie#3 to R5700 pcie#1 ------------------------ tom@General-Research:~$ lspci \| grep -i VGA 0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) 0c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) tom@General-Research:~$ ------------------------ Sat 13 Jun 2020 11:35:49 AM CDT \| \| Starting BOINC client version 7.16.5 for x86_64-pc-linux-gnu Sat 13 Jun 2020 11:35:49 AM CDT \| \| log flags: file_xfer, sched_ops, task, sched_op_debug Sat 13 Jun 2020 11:35:49 AM CDT \| \| Libraries: libcurl/7.58.0 GnuTLS/3.5.18 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3 Sat 13 Jun 2020 11:35:49 AM CDT \| \| Data directory: /home/tom/Desktop/BOINC Sat 13 Jun 2020 11:35:49 AM CDT \| \| OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 3075.10, device version OpenCL 1.2 AMD-APP (3075.10), 4082MB, 4082MB available, 4915 GFLOPS peak) Sat 13 Jun 2020 11:35:50 AM CDT \| \| libc: Ubuntu GLIBC 2.27-3ubuntu1 version 2.27 Sat 13 Jun 2020 11:35:50 AM CDT \| \| Host name: General-Research -------------------------------------------- How about pcie#1 with R5700 and video monitor. pcie#3 expansion card. Front to back: Rx570, Rx 570, R5700? ---------------- tom@General-Research:~$ lspci \| grep -i VGA 0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) 0f:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 13:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev ef) 16:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 731f (rev c4) tom@General-Research:~$ It looks like I lost the end of my testing notes. I will see if I can find anything in the log files you mentioned. I am going to post them in seperate messages.
22) Message boards : BOINC client : Amd OCL2 and OCL1.2 drivers won't co-exist on Boinc Manager but seems to work elsewhere Message 99255 Posted 11 Jun 2020 by Tom M	Where are those first 30 lines of the log then? I no longer am running OCL2 and OCL1.2 on the same machine. I would have to move a gpu and un-install/re-install the drivers. While I might get to it. I might not. I sold one of my 3 OCL2 gpus which I performed the experiment with since it wasn't going to be able to do what I needed when I needed it. The other two OCL2 gpus (r5700's) are inside a computer case and will take more time to setup a re-test. This is a link to a message where someone else replicated my " can't get older/new Amd cards to run on the same system issue" [ur]https://einsteinathome.org/content/most-efficient-most-productive-and-cheapest-gpu?page=3#comment-177960[/url] Maybe he is still setup? Tom M
23) Message boards : BOINC client : Amd OCL2 and OCL1.2 drivers won't co-exist on Boinc Manager but seems to work elsewhere Message 99253 Posted 11 Jun 2020 by Tom M	I recently had the possibility of running a couple of Navi 10 gpus (R5700's) with a bunch (around 5-9) Rx 570/460 etc gpus. I have discovered that the Boinc Manager won't recognize both a AMD OCL2 GPU and an AMD OCL1.2 GPU at the same time. In the first 30 lines log I can get one or the other to display but not both. I have tested this on Linux (Ubuntu) and Windows 10. The Window 10 Device Manager reports a "driver" error for the Rx 570 and shuts it down. I am not certain if this is the right message area. If I posted in the wrong developers area please move it. Tom M
24) Message boards : The Lounge : Bought a new Ryzen 9 specially for Boinc projects! Excited! Message 97104 Posted 27 Mar 2020 by Tom M	I would consider moving the 3900x into a standard sized midtower case. If you want to increase your CPU power consumption you are going to need the most space and best cooling you can afford. I think there is a Windows app from AMD that will help you tell what kind of temperatures your system(s) are running. There are some for Linux too but not from AMD. My AMD 3950x is running Linux because there was a super efficient gpu app for Seti@Home that I was/am using. From a "bang for the electrical buck" point of view the econ mode might be the very best you can do. Tom
25) Message boards : The Lounge : The Seti is Slumbering Cafe Message 97103 Posted 27 Mar 2020 by Tom M	I believe Seti@Home may be plunking out early. Tom
26) Message boards : The Lounge : The Seti is Slumbering Cafe Message 97102 Posted 27 Mar 2020 by Tom M	One Australian company is finally getting appreciated: Coronavirus fires up production at Australia's only medical mask factory Well someone is being busy. :) It is the classic if you can't produce it completely domestically in a stressful situation someone can "hold you hostage" to it. Tom
27) Message boards : The Lounge : The Seti is Slumbering Cafe Message 97043 Posted 25 Mar 2020 by Tom M	Maybe we can get a good nights rest on the Tuesdays because Seti@Home is resting instead of maintaining? Tom
28) Message boards : The Lounge : Bought a new Ryzen 9 specially for Boinc projects! Excited! Message 97042 Posted 25 Mar 2020 by Tom M	I am glad you are happy with your Amd 3900x. I was very happy with mine. After I upgraded to a 3950x I couldn't afford to keep all of them running so I sold the 3900x to a Seti Friend.
29) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96125 Posted 26 Feb 2020 by Tom M	Just arrived from the outrage pub and see. The festivities ends. Web pages are back. Just noticed..... :)
30) Message boards : The Lounge : Best Mining Motherboards for BOINC? Message 96123 Posted 26 Feb 2020 by Tom M	My approach is to use low power CPU's like a Pentium Gold (2C/4T), or Core I3 (4C) to feed 3-4 high end GPUs on cheap $100 motherboards; rather than expensive multicore CPUs pushing multi GPUs over inefficient and slow PCIE lanes. The cons of my setup is that I get 80-90W overhead on each 3GPU system (90W divided over CPU, board hardware, and PSU efficiencies). Something you won't have to worry about with a mining setup; but then again, a mining setup runs much less efficient. Thank you for your extensive and thoughtful reply. With the Linux + the Tbar/Petri AIO I have been able to run the gpus at the default 0.1 cpu. So far the wall clock time and amount of CPU usage are tracking pretty closely. I was worried about having enough cpu threads to actually drive up to 18 gpus which is why I bought an 8th-9th Gen MB and a 8c/16t cpu. I have two 20 Amp circuits and a 15 Amp circuit that I will be splitting the load across. One 20 Amp circuit is completely unused so I am running it as my primary line now (with 10 gpus). I am going to have to get some 20 Amp rated surge-protectors. My current ones are overloading. Unfortunately the other circuits have more than the Seti box drawing on them. So it simply may not be possible to provide enough power to run all 18. But wait, there's more :) I am going to have to buy a 19 gpu mining frame and longer UGREEN 3.0USB cables as well as 20 Amp surge-protectors before I can experiment with the higher end stuff. I may have to rob some gpu's from some other systems for a trial. I do have 1 RTX 2060 Super which according to a regularly updated report by a guy named "Shaggie" comes out with the best performance/power efficiency combo. Tom
31) Message boards : GPUs : PCI express risers to use multiple GPUs on one motherboard - not detecting card? Message 96122 Posted 26 Feb 2020 by Tom M	I've had good luck with the UGREEN branded cables from amazon: https://www.amazon.com/UGREEN-Transfer-Enclosures-Printers-Cameras/dp/B00P0E3954/ +1 "Me too" :) I have had VERY good luck with them. Tom
32) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96118 Posted 26 Feb 2020 by Tom M	almost out of work on the fastest machine. about 80% down on my 2nd fastest. My cpu is still seti@homing on my Intel but the gpu tasks are long gone. E@H appears to be making out like a bandit. But then I only run 4 cpu threads on that box. Egads I may have to start spoofing gpus again... :) Tom
33) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96117 Posted 26 Feb 2020 by Tom M	Though this be madness, yet there is method in it'? Was that Shakespeare or someone else? Tom
34) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96115 Posted 26 Feb 2020 by Tom M	+1 I'll drink to that!
35) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96114 Posted 26 Feb 2020 by Tom M	What time did it go down? I was on the website at least until 7:15CST this morning. Tom
36) Message boards : The Lounge : The Seti is Slumbering Cafe Message 96112 Posted 26 Feb 2020 by Tom M	Did anyone knows where is the moon? ... Just in case. The moon is a "waxing crescent" -- almost completely dark going towards a full moon. My weather app indicates it rises here in Dallas / Fort Worth TX USA at 08:23 and sets at 20:21 [Central Standard Time( UTC -6 hrs)]. SETI IS STILL DOWN. More burning hair is needed! Maybe a Wig would help? Then you could "burn, baby, burn!" Tom
37) Message boards : The Lounge : The Seti is Slumbering Cafe Message 95681 Posted 4 Feb 2020 by Tom M	My Set@Home cpu cache is down to its "last dregs" and should be empty within an hour. GPU cache is long gone. I broke down and turned on World Community Grid to reduce the E@H mix. If I am reading it right it started Maintenance this morning about 7am my time. Its 3:49pm my time. Tom
38) Message boards : The Lounge : The Seti is Slumbering Cafe Message 95678 Posted 4 Feb 2020 by Tom M	I'm supposed to be peeling potatoes... but okay :) (and I will also add my thanks to Jord too, for his post. I can't do the social media thing, but I will definitely be sending Fred a card :) +1
39) Message boards : The Lounge : The Seti is Slumbering Cafe Message 95573 Posted 29 Jan 2020 by Tom M	Still down....
40) Message boards : The Lounge : The Seti is Slumbering Cafe Message 95487 Posted 23 Jan 2020 by Tom M	I have now joined nearly all the "project aggregators" to see what they look like..... Tom

Copyright © 2025 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.