Posts by Mel S

1) Message boards : GPUs : GPUs detected, but apparently configured wrong (Message 37656) Posted 1 May 2011 by Mel S Post: issue solved thanks
2) Message boards : GPUs : GPU's won't crunch at all (Message 37651) Posted 30 Apr 2011 by Mel S Post: Tried it again and it works like a charm.. Thanks Claggy.. You nailed it. The code I was pasting had blanks it. I found a link that said this causes problems. With out the blanks it stored and ran like a charm. Sweet success.
3) Message boards : GPUs : GPU's won't crunch at all (Message 37650) Posted 30 Apr 2011 by Mel S Post: In my last post I used use_all_gpus code and not use-all-gpus. I just noticed that. I also included the brackets. Was that correct?
4) Message boards : GPUs : GPU's won't crunch at all (Message 37649) Posted 30 Apr 2011 by Mel S Post: It worked... Thanks much. Now I would like to get my second GPU crunching. Here is what I attempted already. I copied and pasted the use-all-gpus code from another post into a notepad document and saved it into a file I named cc_config.xml. It created the file but didn't seem to save the code. I used all files and ANSI. Please give explicit instructions on the proper procedure for creating this file. It was saved to C:\ProgramData\Boinc as I was instructed to do. I can no longer fold proteins with my second GPU. Hence, it is currently idle. As far as shouting that was the furthest thing from my mind. I type with two fingers and need to look at keyboard the whole time I am typing. My caps lock was on and I didn't know it. When I looked at my thread I didn't feel like going back and typing again. I did not know this could be construed as yelling. So, I have learned something useful again.
5) Message boards : GPUs : GPU's won't crunch at all (Message 37641) Posted 29 Apr 2011 by Mel S Post: I DETACHED AQUA. SUSPENDED ALL PROJECTS EXCEPT SETI, THEN ALL PROJECTS EXCEPT MILKYWAY, THEN ALL PROJECTS EXCEPT COLLATZ. NO GPU CRUNCHING STARTED. THEN SUSPENDED ALL CPU TASKS LEAVING ONLY MILYWAY CUDA_OPENCL RUNNING. NO HELP. CAN YOU SUGGEST ANYTHING FURTHER?
6) Message boards : GPUs : GPU's won't crunch at all (Message 37639) Posted 28 Apr 2011 by Mel S Post: 4/28/2011 3:07:03 PM Starting BOINC client version 6.10.60 for windows_x86_64 4/28/2011 3:07:03 PM log flags: file_xfer, sched_ops, task 4/28/2011 3:07:03 PM Libraries: libcurl/7.19.7 OpenSSL/0.9.8l zlib/1.2.3 4/28/2011 3:07:03 PM Data directory: C:\ProgramData\BOINC 4/28/2011 3:07:03 PM Running under account Mel 4/28/2011 3:07:03 PM Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz [Family 6 Model 26 Stepping 5] 4/28/2011 3:07:03 PM Processor: 256.00 KB cache 4/28/2011 3:07:03 PM Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 syscall nx lm vmx tm2 popcnt pbe 4/28/2011 3:07:03 PM OS: Microsoft Windows 7: Ultimate x64 Edition, Service Pack 1, (06.01.7601.00) 4/28/2011 3:07:03 PM Memory: 5.99 GB physical, 11.98 GB virtual 4/28/2011 3:07:03 PM Disk: 238.38 GB total, 166.94 GB free 4/28/2011 3:07:03 PM Local time is UTC -5 hours 4/28/2011 3:07:03 PM NVIDIA GPU 0: GeForce GTX 480 (driver version 27061, CUDA version 4000, compute capability 2.0, 1472MB, 1393 GFLOPS peak) 4/28/2011 3:07:03 PM NVIDIA GPU 1 (not used): GeForce GTX 285 (driver version 27061, CUDA version 4000, compute capability 1.3, 1993MB, 708 GFLOPS peak) 4/28/2011 3:07:03 PM AQUA@home URL http://aqua.dwavesys.com/; Computer ID 46644; resource share 100 4/28/2011 3:07:03 PM Collatz Conjecture URL http://boinc.thesonntags.com/collatz/; Computer ID 63136; resource share 100 4/28/2011 3:07:03 PM Milkyway@home URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 260488; resource share 100 4/28/2011 3:07:03 PM SETI@home URL http://setiathome.berkeley.edu/; Computer ID 5913573; resource share 100 4/28/2011 3:07:03 PM malariacontrol.net URL http://www.malariacontrol.net/; Computer ID 185299; resource share 100 4/28/2011 3:07:03 PM Milkyway@home General prefs: from Milkyway@home (last modified 27-Apr-2011 18:47:57) 4/28/2011 3:07:03 PM Milkyway@home Host location: none 4/28/2011 3:07:03 PM Milkyway@home General prefs: using your defaults 4/28/2011 3:07:03 PM Reading preferences override file 4/28/2011 3:07:03 PM Preferences: 4/28/2011 3:07:03 PM max memory usage when active: 5889.68MB 4/28/2011 3:07:03 PM max memory usage when idle: 5889.68MB 4/28/2011 3:07:03 PM max disk usage: 40.00GB 4/28/2011 3:07:03 PM (to change preferences, visit the web site of an attached project, or select Preferences in the Manager) 4/28/2011 3:07:03 PM Not using a proxy Here are the files I am trying to crunch... none of them will start... 4/28/2011 3:07:03 PM Starting BOINC client version 6.10.60 for windows_x86_64 4/28/2011 3:07:03 PM log flags: file_xfer, sched_ops, task 4/28/2011 3:07:03 PM Libraries: libcurl/7.19.7 OpenSSL/0.9.8l zlib/1.2.3 4/28/2011 3:07:03 PM Data directory: C:\ProgramData\BOINC 4/28/2011 3:07:03 PM Running under account Mel 4/28/2011 3:07:03 PM Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz [Family 6 Model 26 Stepping 5] 4/28/2011 3:07:03 PM Processor: 256.00 KB cache 4/28/2011 3:07:03 PM Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 syscall nx lm vmx tm2 popcnt pbe 4/28/2011 3:07:03 PM OS: Microsoft Windows 7: Ultimate x64 Edition, Service Pack 1, (06.01.7601.00) 4/28/2011 3:07:03 PM Memory: 5.99 GB physical, 11.98 GB virtual 4/28/2011 3:07:03 PM Disk: 238.38 GB total, 166.94 GB free 4/28/2011 3:07:03 PM Local time is UTC -5 hours 4/28/2011 3:07:03 PM NVIDIA GPU 0: GeForce GTX 480 (driver version 27061, CUDA version 4000, compute capability 2.0, 1472MB, 1393 GFLOPS peak) 4/28/2011 3:07:03 PM NVIDIA GPU 1 (not used): GeForce GTX 285 (driver version 27061, CUDA version 4000, compute capability 1.3, 1993MB, 708 GFLOPS peak) 4/28/2011 3:07:03 PM AQUA@home URL http://aqua.dwavesys.com/; Computer ID 46644; resource share 100 4/28/2011 3:07:03 PM Collatz Conjecture URL http://boinc.thesonntags.com/collatz/; Computer ID 63136; resource share 100 4/28/2011 3:07:03 PM Milkyway@home URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 260488; resource share 100 4/28/2011 3:07:03 PM SETI@home URL http://setiathome.berkeley.edu/; Computer ID 5913573; resource share 100 4/28/2011 3:07:03 PM malariacontrol.net URL http://www.malariacontrol.net/; Computer ID 185299; resource share 100 4/28/2011 3:07:03 PM Milkyway@home General prefs: from Milkyway@home (last modified 27-Apr-2011 18:47:57) 4/28/2011 3:07:03 PM Milkyway@home Host location: none 4/28/2011 3:07:03 PM Milkyway@home General prefs: using your defaults 4/28/2011 3:07:03 PM Reading preferences override file 4/28/2011 3:07:03 PM Preferences: 4/28/2011 3:07:03 PM max memory usage when active: 5889.68MB 4/28/2011 3:07:03 PM max memory usage when idle: 5889.68MB 4/28/2011 3:07:03 PM max disk usage: 40.00GB 4/28/2011 3:07:03 PM (to change preferences, visit the web site of an attached project, or select Preferences in the Manager) 4/28/2011 3:07:03 PM Not using a proxy 4/28/2011 3:07:03 PM Starting BOINC client version 6.10.60 for windows_x86_64 4/28/2011 3:07:03 PM log flags: file_xfer, sched_ops, task 4/28/2011 3:07:03 PM Libraries: libcurl/7.19.7 OpenSSL/0.9.8l zlib/1.2.3 4/28/2011 3:07:03 PM Data directory: C:\ProgramData\BOINC 4/28/2011 3:07:03 PM Running under account Mel 4/28/2011 3:07:03 PM Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz [Family 6 Model 26 Stepping 5] 4/28/2011 3:07:03 PM Processor: 256.00 KB cache 4/28/2011 3:07:03 PM Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 syscall nx lm vmx tm2 popcnt pbe 4/28/2011 3:07:03 PM OS: Microsoft Windows 7: Ultimate x64 Edition, Service Pack 1, (06.01.7601.00) 4/28/2011 3:07:03 PM Memory: 5.99 GB physical, 11.98 GB virtual 4/28/2011 3:07:03 PM Disk: 238.38 GB total, 166.94 GB free 4/28/2011 3:07:03 PM Local time is UTC -5 hours 4/28/2011 3:07:03 PM NVIDIA GPU 0: GeForce GTX 480 (driver version 27061, CUDA version 4000, compute capability 2.0, 1472MB, 1393 GFLOPS peak) 4/28/2011 3:07:03 PM NVIDIA GPU 1 (not used): GeForce GTX 285 (driver version 27061, CUDA version 4000, compute capability 1.3, 1993MB, 708 GFLOPS peak) 4/28/2011 3:07:03 PM AQUA@home URL http://aqua.dwavesys.com/; Computer ID 46644; resource share 100 4/28/2011 3:07:03 PM Collatz Conjecture URL http://boinc.thesonntags.com/collatz/; Computer ID 63136; resource share 100 4/28/2011 3:07:03 PM Milkyway@home URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 260488; resource share 100 4/28/2011 3:07:03 PM SETI@home URL http://setiathome.berkeley.edu/; Computer ID 5913573; resource share 100 4/28/2011 3:07:03 PM malariacontrol.net URL http://www.malariacontrol.net/; Computer ID 185299; resource share 100 4/28/2011 3:07:03 PM Milkyway@home General prefs: from Milkyway@home (last modified 27-Apr-2011 18:47:57) 4/28/2011 3:07:03 PM Milkyway@home Host location: none 4/28/2011 3:07:03 PM Milkyway@home General prefs: using your defaults 4/28/2011 3:07:03 PM Reading preferences override file 4/28/2011 3:07:03 PM Preferences: 4/28/2011 3:07:03 PM max memory usage when active: 5889.68MB 4/28/2011 3:07:03 PM max memory usage when idle: 5889.68MB 4/28/2011 3:07:03 PM max disk usage: 40.00GB 4/28/2011 3:07:03 PM (to change preferences, visit the web site of an attached project, or select Preferences in the Manager) 4/28/2011 3:07:03 PM Not using a proxy Here are some of the projects that won't run all of which are supported by my GTX 480 and GTX 285. SETI@HOME Enhanced 6.10 (cuda_fermi) Collatz Conjecture 2.03 (cuda 23) Milkyway@home 0.52 (cuda-opencl I had trouble storing the use-all-gpus segment of code in a file called cc_config.xml. I was able to create the file in the proper directory but it wouldn't store. I used *all files, ANSI, and labelled it cc_config.xml. I copied and pasted the code from other messages from people who wrote about using all my GPU's. I went to see if it stored correctly and the file was empty. I would be happy if only the Fermi crunched. Any explicit instructions on how to store the file or any other files which need to be created would be greatly appreciated. Both GPU's are detected just fine. Please assist in getting my hardware to run. )

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.