1) Message boards : Questions and problems : ATI 6970 and 6850 Issue (Message 36921) Posted 19 Feb 2011 by v10rider Post: I already asked this over on Milkyway but I thought I'd try here as well. Is there a way designate GPU0(6970) to run only Milkyway and GPU1(6850) so that it runs everything else ie Collatz and DNETC. Currently DNETC uses both at the same time but only uses about 60-70% of each GPU or Milkyway runs 2 WU on the 6970 while the 6850 sits idle. I used GPUZ to check. BTW it takes 75 seconds to run one Milkyway wu at a time but it takes 165 seconds to run 2 at the same time. What can I add to the cc_config file to fix this? Collatz is working fine, it runs a separate WU on each GPU utilizing 99% on both GPUs. I also know I can't use the 6850 for Milkyway because it doesn't have DP.

---

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.