Posts by STE\/E
|
1)
Message boards :
BOINC client :
BOINC Projects won't Initialize
(Message 49650)
Posted 18 Jun 2013 by STE\/E Post: PrimeGrid ... Actually any Project I try to Attach the Box too ... |
|
2)
Message boards :
BOINC client :
BOINC Projects won't Initialize
(Message 49648)
Posted 18 Jun 2013 by STE\/E Post: I had this Posted in another Thread but the Thread won't let me Post to it so I'll start another Thread. For some reason the BOINC Projects won't Initialize when I do a new Installation of Windows 7 & re-install BOINC. I've tried several different Versions including 7.0.52 & 7.0.64 but they won't work either. There's nothing different I'm doing than I did to any other Box's I've built. The Client will Attach the Projects & I can get to the Projects using the Manager but it refuses to Initialize them. When I try a Manual Update the manager shows I've put the request in but never actually makes the request to the Project. On 1 Box I did get the Projects Initialized & running by copying the BOINC Files from another Box but that hasn't worked on the other Box's & I'm at a loss why it's happening ... I've had several Box's down since January because of this Problem. Eventually I won't have any Box's running, I guess that's not such a bad thing, will save me a lot of money & the headaches associated with running BOINC ... Or should I say trying to run BOINC ... ;) |
|
3)
Message boards :
BOINC client :
BOINC won't Initilize Projects
(Message 47226)
Posted 14 Jan 2013 by STE\/E Post: YoYo, it's up, I'm running it on 17 other Box's ... I was also trying other Projects that I know are up because I'm running them too on the other Box's ... |
|
4)
Message boards :
BOINC client :
BOINC won't Initilize Projects
(Message 47223)
Posted 14 Jan 2013 by STE\/E Post: I tried all that yesterday several times & it didn't work, for some reason this morning it did work. I suspect it was something to do with my Home Network but can't be sure. Anywoot it's working now so Thanks ... |
|
5)
Message boards :
BOINC client :
BOINC won't Initilize Projects
(Message 47210)
Posted 13 Jan 2013 by STE\/E Post: For some reason the last 2 Box's I built & Installed BOINC on the Projects won't Initialize. I've tried several different Versions including 7.0.42 & 7.0.44 but they won't work either. There's nothing different I'm doing than I did to any other Box's I've built. The Client will Attach the Projects & I can get to the Projects using the Manager but it refuses to Initialize them. When I try a Manual Update the manager shows I've put the request in but never actually makes the request to the Project. 1 of the Box's I did get the Projects Initialized & running by copying the BOINC Files from another Box but that didn't work on the Second Box & I'm at a loss why it's happening ... |
|
6)
Message boards :
Questions and problems :
BOINC Manager 6.10.58 Startup
(Message 39181)
Posted 22 Jul 2011 by STE\/E Post: I don't remember now as I've tried it numerous ways. Anyway I think I found the Registry Key that controls starting BOINC on Login "DisableAutoStart" but changing the Value didn't start BOINC on a reboot either ... :/ EDIT: Changing the Value in the Registry & checking the "Run Manager at Login" Box seemed to work on 1 Box so I'll try it on some of the others ... |
|
7)
Message boards :
Questions and problems :
BOINC Manager 6.10.58 Startup
(Message 39179)
Posted 22 Jul 2011 by STE\/E Post: It should be "Start Manager at login?" in your Options Yes I know, but I already stated I checked that Box & the Client doesn't start on login & the Box is unchecked again ... EDIT: It shows "Run Manager at Login" in the Options for 6.10.58 |
|
8)
Message boards :
Questions and problems :
BOINC Manager 6.10.58 Startup
(Message 39176)
Posted 22 Jul 2011 by STE\/E Post: How do I get the BOINC Client (6.10.58) to start up when I restart the computer after a shut down. Some of my Box's do restart BOINC & some don't. I check the Box for Restart on Login but that don't seems to work as the Client still doesn't start up when the Box starts. I've also tried reinstalling BOINC but it doesn't give me the option to start on Login either ... Thanks |
|
9)
Message boards :
BOINC client :
AQUA won't run with v6.12.5
(Message 35967)
Posted 4 Dec 2010 by STE\/E Post: I obey, the Almighty Richard has Spoken ... |
|
10)
Message boards :
BOINC client :
AQUA won't run with v6.12.5
(Message 35962)
Posted 4 Dec 2010 by STE\/E Post: Are you following me ... :P |
|
11)
Message boards :
BOINC client :
AQUA won't run with v6.12.5
(Message 35954)
Posted 3 Dec 2010 by STE\/E Post: Don't know if this has been reported or not but AQUA won't run on my Win XP Pro 64-Bit Box's with v6.12.5 installed, I went back to v6.10.58 and the Wu's ran then ... |
|
12)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35678)
Posted 10 Nov 2010 by STE\/E Post: Have all my Box's Updated to v6.12.5 now, getting used to the newer layout but still don't like a lot of things about it ... 
|
|
13)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35667)
Posted 9 Nov 2010 by STE\/E Post: Bill Gates must be building the BOINC Client now with all the added overhead ... :P |
|
14)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35663)
Posted 9 Nov 2010 by STE\/E Post: [quoteI would have thought the fix of the gpu_active_frac bug would be enough to warrant upgrading to 6.12.5]/quote] Don't know anything about that, I just run the Wu's and don't worry about things like gpu_active_frac ... If the Boinc client and apps aren't shutting down when you exit the Manager, That's not an Option as far as I can see in either 5.12.4 or 6.12.5 ... |
|
15)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35659)
Posted 9 Nov 2010 by STE\/E Post: I'm in the process of Updating them all to v6.12.4, that should do me until the 6.15.xx comes out ... lol So far I don't see any reason to go to 6.12.5 over 6.12.4, neither one of them I care for. The Notice Window Popping up all the Time in nothing but a nuisance, and when I shut down the Client via the Tray Icon it never fully shut down the Client. I have to go into the Task Manager and Manually close the boinc .exc. 6.12.4 & 6.12.5 both show the same tendencies to not shut down completely ... |
|
16)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35635)
Posted 6 Nov 2010 by STE\/E Post: I'm in the process of Updating them all to v6.12.4, that should do me until the 6.15.xx comes out ... lol |
|
17)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35629)
Posted 6 Nov 2010 by STE\/E Post: Why 6.12.1 ?? That's a development version and an old one at that. We're already up to 6.12.4, with 6.12.5 coming in the pipeline (I expect it somewhere this week). I thought that was the latest one at the Download site when I checked for a dew Version of the Client, but I see now if I would have scrolled down a little further the 6.12.4 was there. I downloaded that one now but as long as 6.12.1 is working I'll just go with that for now. I was still on 6.10.57, I don't update that often & as long as things are working that's good enough for me. |
|
18)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35623)
Posted 6 Nov 2010 by STE\/E Post: Had the same thing happen on another Box Messing around switching Video Cards and a Update to the v6.12.1 Client fixed it. Even if I don't know what causes it at Least I have a fix for it if nothing else ... :) |
|
19)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35621)
Posted 5 Nov 2010 by STE\/E Post: What do you want from the stderrdae.txt ??? and from what part of it, there' no date or time so at the beginning or end of it do you need the info. I'll try & remember that if it happens again ... |
|
20)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35619)
Posted 5 Nov 2010 by STE\/E Post: The reason was to cut down on the panic/worry of new users on first seeing some of them and then thinking that there was something wrong. I was Panicky & Worried when I didn't see any Messages lol ... ;) I already found where they went to in the other menu as Jord said ... |
Next 20
Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation.