Thread 'GPU Work Units Only'

Message boards : Questions and problems : GPU Work Units Only
Message board moderation

To post messages, you must log in.

1 · 2 · Next

AuthorMessage
l008com

Send message
Joined: 22 Mar 09
Posts: 51
United States
Message 46951 - Posted: 31 Dec 2012, 15:01:08 UTC

I'm trying to set up a client on my home server, to use GPU only. It has a 9400m GPU, and no monitor attached. So if BOINC uses the GPU, it should be able to do some fast processing, while the CPUs remain unused for me to use, doing server-y things.

I googled around and found that making a cc_config.xml file and putting the following data in there is supposed to make it work. But I did this, restarted my BOINC manager, but its still requesting and processing CPU work units.

<cc_config>
	<options>
		<ncpus>0</ncpus>
 	</options>
</cc_config>


Am I doing something wrong? Is there something else I need to do to make this work properly. Right now I have one GPU Collatz work unit going on my GPU, and a SETI work unit going on my CPU. Booo.
ID: 46951 · Report as offensive
l008com

Send message
Joined: 22 Mar 09
Posts: 51
United States
Message 46952 - Posted: 31 Dec 2012, 15:01:40 UTC - in response to Message 46951.  

Oh and the machine in question is a Mac mini, 10.6.8, with BOINC 7.0.31.
ID: 46952 · Report as offensive
Claggy

Send message
Joined: 23 Apr 07
Posts: 1112
United Kingdom
Message 46953 - Posted: 31 Dec 2012, 15:06:50 UTC - in response to Message 46951.  
Last modified: 31 Dec 2012, 15:11:57 UTC

Just go to each of your projects in turn, and change in their Project Preferences 'Use CPU' to No

SETI@home preferences

Collatz Conjecture preferences

Claggy
ID: 46953 · Report as offensive
Jorge Ramos

Send message
Joined: 4 Sep 09
Posts: 16
Mexico
Message 46990 - Posted: 1 Jan 2013, 23:09:18 UTC - in response to Message 46951.  

Try configuring your client:

http://boinc.berkeley.edu/wiki/Client_configuration

1st step is ok:

<ncpus>0</ncpus>


you may also have to:

<use_all_gpus>1</use_all_gpus>


look, what device number your card is, as viewed from the client (check the log file, you should see something like:)

30/12/2012 11:44:24 p.m. |  | Disk: 465.76 GB total, 440.65 GB free
30/12/2012 11:44:24 p.m. |  | Local time is UTC -6 hours
[b]30/12/2012 11:44:24 p.m. |  | NVIDIA GPU 0: GeForce GTX 690 (driver version 310.70, CUDA version 5.0, compute capability 3.0, 2048MB, 8382371MB available, 3132 GFLOPS peak)[/b]


In this example the 690 is device 0. If you have several devices (GPUs) listed there you should restrict use of your 9400 using the flag

<exclude_gpu>
ID: 46990 · Report as offensive
l008com

Send message
Joined: 22 Mar 09
Posts: 51
United States
Message 47080 - Posted: 6 Jan 2013, 18:34:05 UTC - in response to Message 46990.  

The error seems to be with <ncpus>0</ncpus>
I am getting GPU units just fine, but I'm still getting CPU units.

Since my cc_config.xml file is tiny, here's it's full text:
<cc_config>
   <options>
		<ncpus>0</ncpus>
   </options>
</cc_config>


This file is located at /Library/Application Support/BOINC Data/cc_config.xml[/code]
ID: 47080 · Report as offensive
ProfileJord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15552
Netherlands
Message 47081 - Posted: 6 Jan 2013, 18:39:45 UTC - in response to Message 47080.  

Use the project preferences to set "use CPU" to No and whichever GPU(s) you have to Yes.

Example given: Einstein project preferences http://einstein.phys.uwm.edu/prefs.php?subset=project:

Use CPU
Enforced by version 6.10+ no
Use ATI GPU
Enforced by version 6.10+ yes
Use NVIDIA GPU
Enforced by version 6.10+ no

ID: 47081 · Report as offensive
Jorge Ramos

Send message
Joined: 4 Sep 09
Posts: 16
Mexico
Message 47084 - Posted: 6 Jan 2013, 22:37:05 UTC - in response to Message 47080.  

The error seems to be with <ncpus>0</ncpus>
I am getting GPU units just fine, but I'm still getting CPU units.


Use the project preferences to set "use CPU" to No and whichever GPU(s) you have to Yes.


This may cause confusion to some of us. Although the <ncpus> is also used to simulate "multicore" cpus, but it also has the 0-parameter, which according to the wiki page: "in newer clients really means zero to e.g. only allow GPU computing"

I have placed 0 to <ncpus> in my config file (as I don't want to use cpu for computing) but also have set the "use CPU" option to "no" in my computing preferences in the project's website.

It works, but I guess this can be done more user friendly and would be wiser to discourage the use of duplicate functions in configuration parameters.
ID: 47084 · Report as offensive
Claggy

Send message
Joined: 23 Apr 07
Posts: 1112
United Kingdom
Message 47086 - Posted: 6 Jan 2013, 23:42:28 UTC - in response to Message 47084.  

This may cause confusion to some of us. Although the <ncpus> is also used to simulate "multicore" cpus, but it also has the 0-parameter, which according to the wiki page: "in newer clients really means zero to e.g. only allow GPU computing"

<ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use, we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that,

The "in newer clients really means zero to e.g. only allow GPU computing" statement dates all the way back to before April 09 when GPU computing was only just beginning, circa Boinc 6.6.20, so i hardly think it is intended for use with modern Boinc versions.

Claggy
ID: 47086 · Report as offensive
kdsjsdj

Send message
Joined: 5 Jan 13
Posts: 81
Message 47088 - Posted: 7 Jan 2013, 1:14:35 UTC - in response to Message 47086.  

This may cause confusion to some of us. Although the <ncpus> is also used to simulate "multicore" cpus, but it also has the 0-parameter, which according to the wiki page: "in newer clients really means zero to e.g. only allow GPU computing"

<ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use,


I've never heard David say that and I would imagine 95% have never heard him say that. The official documentation is the wiki. I have heard David say that and I believe he would repeat that statement today if asked. The wiki does not say <ncpus> is a debug setting therefore <ncpus> is not officially a debug setting.

we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that,


Then perhaps the wiki should say something to that effect. At this time it does not.

The "in newer clients really means zero to e.g. only allow GPU computing" statement dates all the way back to before April 09 when GPU computing was only just beginning, circa Boinc 6.6.20, so i hardly think it is intended for use with modern Boinc versions.


But it says "in newer clients". How do those words lead one to the conclusion it does not apply to newer clients? Are readers expected to go through wiki logs to see when each and every statement was published to help decide if it applies today?

Anyway, if people are setting ncpus = 0 and BOINC is still using the CPU then there is a bug in the software, regardless of whether commoners should use the setting or not.

And I removed the phrase in the wiki suggesting ncpus = 0 can be used to configure for GPU only.
ID: 47088 · Report as offensive
Jorge Ramos

Send message
Joined: 4 Sep 09
Posts: 16
Mexico
Message 47090 - Posted: 7 Jan 2013, 2:44:59 UTC - in response to Message 47086.  

<ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use, we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that,


Another example in "multiplicity" of configuration parameters.
ID: 47090 · Report as offensive
kdsjsdj

Send message
Joined: 5 Jan 13
Posts: 81
Message 47094 - Posted: 7 Jan 2013, 5:20:54 UTC - in response to Message 47090.  

<ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use, we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that,


Another example in "multiplicity" of configuration parameters.


+1

And they wonder why people are confused by BOINC. They think the more options the better and they ignore the fact that every time they provide an option they force the user to make a decision. When users are running software for charity they don't have motivation to spend time and effort making a lot of decisions unless the option is well documented and they don't have to look very far to find the documentation. They want it all done, installed and ready to go in 10 clicks or less. Anything more is an annoyance to them.

Responses to this line of reasoning will begin with "well if you don't like it go make your own BOINC". If we persist after that we will be banished so be careful what you say.
ID: 47094 · Report as offensive
ProfileJord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15552
Netherlands
Message 47097 - Posted: 7 Jan 2013, 5:53:32 UTC - in response to Message 47094.  

Actually, most of the documentation is made by volunteers, users just like you and me. Since BOINC is evolving, this means that there's a constant lack of good documentation, as something that was true yesterday will become untrue tomorrow due to a code-change. And lots of that is 'hidden' in the source code, not always commented on by the developers either.
ID: 47097 · Report as offensive
Jorge Ramos

Send message
Joined: 4 Sep 09
Posts: 16
Mexico
Message 47100 - Posted: 7 Jan 2013, 6:07:49 UTC - in response to Message 47094.  

<ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use, we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that,


Another example in "multiplicity" of configuration parameters.


+1

And they wonder why people are confused by BOINC. They think the more options the better and they ignore the fact that every time they provide an option they force the user to make a decision. When users are running software for charity they don't have motivation to spend time and effort making a lot of decisions unless the option is well documented and they don't have to look very far to find the documentation. They want it all done, installed and ready to go in 10 clicks or less. Anything more is an annoyance to them.

Responses to this line of reasoning will begin with "well if you don't like it go make your own BOINC". If we persist after that we will be banished so be careful what you say.


Personal disclaimer: ;)

As a volunteer tester, I really appreciate the work done by BOINC programmers. I do not expect perfection from BOINC and I guess some programmers are or have some kind of volunteering in their work too. I know, by personal experience, that you cannot build a system and expect everyone would be happy with it.

I am not a scientist but try to support science in any way I can. Having said that, everything is perfectible and I feel I might add to construction of this great endeavour by giving my opinion, in the light of an average-joe user.

Just as I can sometimes ask for help in these forums, I feel obligated to give one's back in return whenever I can.

Every bit of ideas I might post here are just my 2 cents for improving the useability of BOINC from the point of view of an average user, imho. Whether someone would find this usefull or not, is not for me to decide, but that is not reason enough for me to restrain me from expressing anything which actually did diminish my experience with the use of the software.

No personal offense is meant to anyone in this and all threads I might post. ;)
ID: 47100 · Report as offensive
kdsjsdj

Send message
Joined: 5 Jan 13
Posts: 81
Message 47101 - Posted: 7 Jan 2013, 6:07:55 UTC - in response to Message 47097.  

So you're saying users ought to consult the source code if they want up to date documentation?
ID: 47101 · Report as offensive
BilBg
Avatar

Send message
Joined: 18 Jun 10
Posts: 73
Bulgaria
Message 47102 - Posted: 7 Jan 2013, 6:36:22 UTC - in response to Message 47101.  

So you're saying users ought to consult the source code if they want up to date documentation?

No, I think he is saying that he and others active in editing wiki pages have to dig sometimes in the code to find out the truth about BOINC behavior when the developers didn't say something explicitly.
And this takes time.
Especially when the code changes significantly.
Often some 'new concept' code replaces the old, it takes time someone to figure out what is changed and edit the relevant wiki pages.

Ageless is active in writing/editing the wiki pages:
http://boinc.berkeley.edu/w/?title=Client_configuration&action=history





- ALF - "Find out what you don't do well ..... then don't do it!" :)
ID: 47102 · Report as offensive
BilBg
Avatar

Send message
Joined: 18 Jun 10
Posts: 73
Bulgaria
Message 47103 - Posted: 7 Jan 2013, 6:48:24 UTC - in response to Message 47088.  

Anyway, if people are setting ncpus = 0 and BOINC is still using the CPU then there is a bug in the software, regardless of whether commoners should use the setting or not.

Are you sure the setting <ncpus>0</ncpus> was recognized by BOINC (e.g. what the log say)?
Was BOINC restarted after the edit?





- ALF - "Find out what you don't do well ..... then don't do it!" :)
ID: 47103 · Report as offensive
kdsjsdj

Send message
Joined: 5 Jan 13
Posts: 81
Message 47104 - Posted: 7 Jan 2013, 7:17:53 UTC - in response to Message 47103.  
Last modified: 7 Jan 2013, 7:19:12 UTC

Anyway, if people are setting ncpus = 0 and BOINC is still using the CPU then there is a bug in the software, regardless of whether commoners should use the setting or not.

Are you sure the setting <ncpus>0</ncpus> was recognized by BOINC (e.g. what the log say)?
Was BOINC restarted after the edit?



You would have to ask the person who reported that. All I said is that if that is the behavior then there is a bug.

I do know that changing from ncpus = 7 to ncpus = 5, for example, takes effect as soon as you force reread of cc_config.xml. It does not require a BOINC client restart. Changing to ncpus = 0 might require a restart, I don't know, never tried it.

It is possible that the person who raised this issue did not force reread of cc_config.xml. Good for you to bring that possibility to the front.


BTW, that's not my ISP and IP address, if that's what you're saying.
ID: 47104 · Report as offensive
kdsjsdj

Send message
Joined: 5 Jan 13
Posts: 81
Message 47105 - Posted: 7 Jan 2013, 7:23:44 UTC - in response to Message 47102.  

So you're saying users ought to consult the source code if they want up to date documentation?

No, I think he is saying that he and others active in editing wiki pages have to dig sometimes in the code to find out the truth about BOINC behavior when the developers didn't say something explicitly.
And this takes time.
Especially when the code changes significantly.
Often some 'new concept' code replaces the old, it takes time someone to figure out what is changed and edit the relevant wiki pages.


Doh! Yes, I see now. I should have realized that is what he meant because I was once active in writing wiki pages, back when Ageless refused to write. Fortunate for us he has changed his mind.
ID: 47105 · Report as offensive
BilBg
Avatar

Send message
Joined: 18 Jun 10
Posts: 73
Bulgaria
Message 47107 - Posted: 7 Jan 2013, 8:49:13 UTC - in response to Message 47104.  

BTW, that's not my ISP and IP address, if that's what you're saying.

:)
I'm not saying this - the graphic is generated dynamically by danasoft.com
so everyone see his own IP (or the IP of Proxy or VPN he is using)
(only you see your IP, I see mine)



==
http://www.danasoft.com/sig/BilBg.jpg

http://www.danasoft.com/





- ALF - "Find out what you don't do well ..... then don't do it!" :)
ID: 47107 · Report as offensive
ProfileJord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15552
Netherlands
Message 47108 - Posted: 7 Jan 2013, 11:46:31 UTC - in response to Message 47102.  

Often some 'new concept' code replaces the old, it takes time someone to figure out what is changed and edit the relevant wiki pages.

Often even it happens that I read something in one of the Wiki's (there's two official ones), that was changed a long time ago, but no one had bothered up till that point to change it. perhaps others hadn't seen it either, or it's on someone's ever growing to-do list (been there), or there's some other cause that the documentation isn't up-to-date.

More often it happens that another user comes onto a forum somewhere asking for clarification about a thing in the Wiki's... like it happened here. ;-)
ID: 47108 · Report as offensive
1 · 2 · Next

Message boards : Questions and problems : GPU Work Units Only

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.