GPU mis-identified in dual gpu system.

Message boards : GPUs : GPU mis-identified in dual gpu system.
Message board moderation

To post messages, you must log in.

AuthorMessage
Profile Joseph Stateson
Volunteer tester
Avatar

Send message
Joined: 27 Jun 08
Posts: 641
United States
Message 37564 - Posted: 23 Apr 2011, 14:02:01 UTC

In a system with two GTX-280, I replaced a defective GTX280 with a GTX570 and AFAICT all projects are reporting my computer to have two GTX-570. I assume this problem is with the project web software?

I set cc_config to force all gpu's to be used as BM was only using the 570. Both boards are crunching fine but project computer info shows, for example, the following incorrect identifications:

ID: 37564 · Report as offensive
Profile Jord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15477
Netherlands
Message 37565 - Posted: 23 Apr 2011, 14:30:32 UTC - in response to Message 37564.  

As far as I know, project web sites will only show your different GPUs when they're from different vendors, as in one Nvidia and one ATI. When there is more than one GPU of the same vendor in the system, only the best card will be shown with the number of GPUs in the system. This doesn't take into account which GPUs are in the system.
ID: 37565 · Report as offensive
skgiven
Avatar

Send message
Joined: 19 Aug 08
Posts: 87
United Kingdom
Message 37722 - Posted: 9 May 2011, 17:07:23 UTC - in response to Message 37565.  

The most up to date GPU is reported twice in the system spec, based on compute capability, but in the task details you can see which GPU the task ran on and both GPU's real details.
ID: 37722 · Report as offensive
iansm

Send message
Joined: 14 Aug 11
Posts: 1
United Kingdom
Message 39662 - Posted: 14 Aug 2011, 11:27:26 UTC - in response to Message 37722.  

The most up to date GPU is reported twice in the system spec, based on compute capability, but in the task details you can see which GPU the task ran on and both GPU's real details.

This is what I had expected after reading this thread and confirmed by BOINC Manager identifying the stronger / newer GPU as device 0.

Installed a GTX 460 in the first (top) PCIe slot after moving down a 570 to the second slot. BM interprets the 570 as device 0 and the 460 as device 1.

The computer's GPU description indicates [2] NVIDIA GeForce GTX 460 - not the "device 0" 570 as expected. Presumably because BOINC project (server) project software uses the system's lowered numbered PCI bus (as interpreted by Windows) rather than the BOINC client's GPU device sequence.

Not a big deal for me but could be misleading for people who browse project host lists before deciding on a new GPU purchase? Exactly what I did before taking the plunge and ordering the 570 for my main GPU project - GPUGrid.

Not practical to swap cards around as the reason the 460 is in the top slot is because it is about 10mm slimmer than the fat 570. Both cards have non-reference twin fan coolers. Even the small gap of 10mm, aided by a case side intake fan, generates very acceptable temps of around 70 deg C (both cards) when crunching GPUGrid. The alternative config would have the cards practically touching!
ID: 39662 · Report as offensive

Message boards : GPUs : GPU mis-identified in dual gpu system.

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.