Low CPU usage

Message boards : Questions and problems : Low CPU usage
Message board moderation

To post messages, you must log in.

AuthorMessage
brittonc

Send message
Joined: 3 Nov 21
Posts: 2
Message 105959 - Posted: 3 Nov 2021, 15:34:11 UTC

Hi,

We have just decommissioned a few 5 year old servers with 2 x 8 core Xeons (32 cores with hyperthreading) and I got permission to run World Community Grid projects on them. I installed BOINC and was surprised to find it only running at 1.2GHz (base is 2.4GHZ) at about 30% CPU utilisation. I disabled hyperthreading in BIOS and now it's running at about 2.9GHz but only 15% utilisation! The tasks are now taking about 3 times longer than my desktop and 4 times longer than a 10 year old Dell server running 2 x 6 core Xeons. When I suspend BOINC from running the speed goes back up to 2.4GHz and above.

Is this a limit/bug with the BOINC client or the project? Seems a waste of resources if I can only do half the number of tasks and they are taking 3-4 times longer than hardware twice as old. I thought this would be a decent increase in performance, not a step backwards.

Any advice appreciated. Thanks.
ID: 105959 · Report as offensive
Profile Jord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15477
Netherlands
Message 105961 - Posted: 3 Nov 2021, 16:25:37 UTC - in response to Message 105959.  

Which operating system are you running?
Did you install (newer) chipset drivers for that OS?
ID: 105961 · Report as offensive
brittonc

Send message
Joined: 3 Nov 21
Posts: 2
Message 105969 - Posted: 4 Nov 2021, 8:18:45 UTC - in response to Message 105961.  

Hi Jord,

I tried server 2016 and am now running it on Windows 10. I did all updates but haven't looked specifically at the chipset manufactures drivers so will make that my next stop.
ID: 105969 · Report as offensive
Profile Joseph Stateson
Volunteer tester
Avatar

Send message
Joined: 27 Jun 08
Posts: 641
United States
Message 105982 - Posted: 5 Nov 2021, 11:56:17 UTC
Last modified: 5 Nov 2021, 11:59:26 UTC

Temp throttling? Are you monitoring the temperatures? WCG tasks use 100% of CPU. 32 threads 24/7 in a 1U case?. I have two dual xeon servers, motherboards pulled from 1U racks. On one (16 threads)I had to use high speed cpu coolers. On another one, 24 threads, I got tired of the noise and put in DIY liquid cooling. Both are in open air racks. TThrottle can show temps and if you use Boinctasks it can report temperatures back to you.

ID: 105982 · Report as offensive

Message boards : Questions and problems : Low CPU usage

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.