Message boards : News : BOINC roadmap / wish list
Message board moderation
Author | Message |
---|---|
Send message Joined: 10 Sep 05 Posts: 726 |
|
Send message Joined: 17 Nov 16 Posts: 890 |
I like the roadmap goals. I would put fan noise and heat generation at the top of the list for retention of volunteers. I see a constant flux of posts about objectionable fan noise when a BOINC task starts up on both cpu and gpus. Second would be out of the box ease of use for newcomer volunteers. |
Send message Joined: 8 Nov 10 Posts: 310 |
I like the ideas about making it easier for scientists to use BOINC. From what I see, there is a shortage of good new projects. In many cases, there are more crunchers than work in interesting areas. If more scientists can access BOINC, we each have a better chance of getting what we consider to be "good" work. As for fan noise, video playback, etc. that is probably important for some people. But I use dedicated Linux machines that have the right amount of cooling and no contention with other applications, so I would not compromise performance for that. In fact, I would prefer higher CPU (and GPU) utilization where possible. So such techniques to minimize impact on non-BOINC processes should be made optional for those who want them. I am glad you are thinking about these things. Good luck. |
Send message Joined: 17 Nov 16 Posts: 890 |
But we can't be considered "normal" users. We have dedicated crunching farms where noise and heat is expected. But we are a minority. To increase the number of volunteers overall, we must appeal to the masses who would have at most one machine and have just discovered the possibility of crunching for science when the machine is not being used for traditional computer use. These are the typical users which find screaming fans and hot rooms objectionable. And the ones we must cultivate into dedicated BOINC crunchers. |
Send message Joined: 5 Oct 06 Posts: 5129 |
Where are we going to actually "discuss" this? A lot is made of fan noise in the paper. I think we need to distinguish between CPU fans GPU fans Integrated laptop fans I think CPU fans are fairly well understood, and the paper talks about things like power state management. I think we're on track there. I suspect GPU fans are a big problem. So far as I know, the GPU manufacturers have only supplied software tools which generate apps which operate in 'fire and forget' mode: once a scientific application is launched, it grabs as many resources (shaders) as it can find, and runs them at a speed/power which can only be controlled externally, not by the program itself. In the spirit of the paper, BOINC needs to reach out to the GPU manufacturers and persuade them to implement internal power state management, similar to the CPU tools. And laptop fans are probably the biggest problem of all. They are physically closer to the user, and more intrusive if the user's foreground application has an audio component (movies or music). I think most user complaints are likely to come from this group, and I don't have any answers. |
Send message Joined: 29 Aug 05 Posts: 15567 |
So far as I know, the GPU manufacturers have only supplied software tools which generate apps which operate in 'fire and forget' mode: once a scientific application is launched, it grabs as many resources (shaders) as it can find, and runs them at a speed/power which can only be controlled externally, not by the program itself.Sapphire has Trixx which allows the user to set a custom fan speed (via a curve) which is used for everything - gaming and BOINC. One can also set several profiles (up to 5) to quickly switch to in case one needs more rigorous cooling. EVGA has similar software. MSI has Afterburner which can be used on any GPU whose manufacturer doesn't have its own software. Radeon Settings (part of the Radeon drivers) have their own custom setup options via RS->Gaming->Global Settings. |
Send message Joined: 5 Oct 06 Posts: 5129 |
Trixx, EVGA and MSI are all examples of what I was meaning by 'controlled externally'. I don't see how they could, even hypothetically, be integrated into a future BOINC client and controlled through a unified BOINC GUI. |
Send message Joined: 8 Nov 10 Posts: 310 |
But we don't know how much power reduction can be achieved via BOINC or any other technique. That may argue for trying it, but I don't think it guarantees any success. It takes a certain amount of power to calculate a certain amount of work. Laptops were not designed for DC. If BOINC can make it better, good for it. But I would not be too surprised if not much more is possible than just adjusting the fan based on the GPU temperature, as is done now. Otherwise, it suggests that both Linux and Microsoft are falling down on the job of running their stuff efficiently. That is possible, but can BOINC improve on it? |
Send message Joined: 5 Oct 06 Posts: 5129 |
It takes a certain amount of power to calculate a certain amount of work.No, it takes a certain amount of energy - which is the product of power and time. We can reduce the power by increasing the time - slowing the clock, using fewer components, pausing at intervals. If we want to accommodate users who want a quiet life (less fan noise), we have to tone down the 'need for speed'. |
Send message Joined: 8 Nov 10 Posts: 310 |
No, it takes a certain amount of energy - which is the product of power and time. I figured someone would catch me on that. But the question is what can BOINC do to control those variables? I suggest a "laptop mode" that cuts the number of cores to half of the total. That will be more reliable than anything else. |
Send message Joined: 12 Feb 11 Posts: 419 |
I like the roadmap goals. I would put fan noise and heat generation at the top of the list for retention of volunteers. Second, for me, is the participation of the projects admins to forums |
Send message Joined: 28 Jun 10 Posts: 2707 |
Second, for me, is the participation of the projects admins to forums Good luck with that one! For a short while cpdn had someone in post who had as part of her job description keeping up to date information on current projects on the forums. It was appreciated both by the crunchers and mods on the boards. Sadly, she wasn't replaced when leaving for another job. |
Send message Joined: 12 Feb 11 Posts: 419 |
Second, for me, is the participation of the projects admins to forums For example, an automatic mail system (configured during server installation) that send messages to admins, for example, about posts on forum or if the queue is empty of if a server daemon is down... |
Send message Joined: 8 Nov 19 Posts: 718 |
My 2ct: Fan noise: The data on fan speeds, is accessible for CPU and GPU fans in Linux and Windows. It's probably not very hard to write a script, that calculates and arranges GPU load depending on fan speed; but would only work with active GPUs. As far as GPU throttling, the most effective way for GPUs is adjust parallel processes. GPUs nowadays have anywhere from 6 to 6000 cores. The easiest way to adjust for that, is limit the parallel processes; or do like folding@home; adjust each GPU task to it's GPU core count; and leave the power adjustment to overclocking utilities (power cap), like nvidia-smi (in Linux), or XOC or afterburner in Windows. Android GPUs don't add that much to crunching. Their GPUs, especially Mali 400 GPUs, are slow, and consume a lot of power. The more modern Snapdragon chipsets have GPUs that are just as powerful as the CPU part, so you'll be looking at a 2x increase; with the potential of frying the cellphone when CPU and GPU tasks are done at the same time at worst, and at best, probably drain the battery of the phone, as many phones do not draw enough current to support both GPU and CPU crunching. But GPU only would be an option (for now)... |
Send message Joined: 12 Feb 11 Posts: 419 |
Some days ago i helped one of our (Boinc Italy) volunteer, who could not upload files and had some other problems. He used Boinc 5, cause he thinked that Boinc auto-update (like Firefox, for example). After update to 7.14.2, all solved. I know that there are problems to implement auto-update (even if i don't remember which problems), but this is a welcome feature. |
Send message Joined: 28 Jun 10 Posts: 2707 |
Some days ago i helped one of our (Boinc Italy) volunteer, who could not upload files and had some other problems. I don't know what happens on windows. Certainly under WINE there is no automagical update. On Linux updates do occur if BOINC is installed via package manager. If you roll your own from a testing version on Git Hub then unsurprisingly you are on your own! |
Send message Joined: 4 Feb 20 Posts: 1 |
I started using Boinc with a single core CPU. Switching projects was the only way to participate in multiple projects. There was a drawback. Sometimes a task was almost finished to report it in time before the deadline and then projects were switched :-( Now I have a multi core CPU and for me it makes switching projects unnecessary. So my thing for the wish list is: don' t switch projects but select for each project how many cores (threads) it can use. If this can be made possible, I will participate in more than 1 project again. There is also another thing that can be improved. The manager shows for each task how much time it will take to finish (estimated). I let Boinc use 30% of my CPU and those estimated times should be multiplied by 100/30 in my case. |
Send message Joined: 8 Nov 19 Posts: 718 |
Manual override control over projects within the manager. I prefer to have something in the manager, like a 'projects tab', showing each project I'm using; and a setting within that tab, to allow me to override GPU numbers, and CPU numbers. Eg: Within the manager, to have a GUI option to set which GPUs and CPU (cores) I can assign to each project. Including the option to reserve NO CPU (or no GPU) for a project. Some projects just run better on GPU, and I prefer to use CPU resources on projects that only run CPU. On the other hand, I would like hardware I own, that doesn't have usable GPUs for processing, to still be able to crunch on CPU on those projects. I've always opposed the idea for remote configuration of projects. I think each project needs to be independently controlled from within each client. At least, each client should have an override feature, to override or modify web settings. Eg: If I have 2 PCs, both with AMD and NVIDIA GPUs, but I only want one client to run one project on AMD, while the other runs the same project on NVidia, I should be able to do that. |
Send message Joined: 3 Nov 19 Posts: 2 |
I started using Boinc with a single core CPU. Switching projects was the only way to participate in multiple projects. There was a drawback. Sometimes a task was almost finished to report it in time before the deadline and then projects were switched :-( There already is the ability to select how many cores/threads each project can use. The app_config.xml file you create in the projects home directory can do that. Look at the manual here https://boinc.berkeley.edu/wiki/Client_configuration to see how. |
Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation.