Posts by Tom M

41) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95475)
Posted 23 Jan 2020 by Profile Tom M
Post:
My backup project has just blown past 200,000 RAC. There is just a little too much backup here.....

Tom
42) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95474)
Posted 23 Jan 2020 by Profile Tom M
Post:
Just arrived and see my host is out of WU and SETI is still down.

I think the SETI Gods demand a huge sacrifice!


The BIGest sacrifice you could make would be to "go dry" :)


Tom
43) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95473)
Posted 23 Jan 2020 by Profile Tom M
Post:
. . I must dare to interrupt the frivolities with a technical question without notice. Does anyone know if there are any repository Nvidia drivers (Linux) that support OpenCL?

Stephen

? ?



You mean this? sudo apt install ocl-icd-libopencl1

As JimB noted you have to install that for Linux OpenCL after you install your Nvidia drivers for the card.

Tom
44) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95467)
Posted 22 Jan 2020 by Profile Tom M
Post:
Well when they are done reorging this DB it should be reorged within an inch of its life it will be really ready to "howl".......
45) Message boards : The Lounge : Best Mining Motherboards for BOINC? (Message 95443)
Posted 22 Jan 2020 by Profile Tom M
Post:
https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=882
I have had experience with a Biostar tb350-btc. It has 6 slots and when the Moon is correctly aligned it will run as many as 9 gpus at once.

I have a couple of ultra-stable ASUS MB's (a Cross Hair Hero VII and a Prime...) and they won't run more than 6 gpus.

I have also played with a couple of Intel server motherboards and was able to get 7-9 gpus running on 5-7 slot boards.

My next experiment will be with a "MSI B360-F PRO LGA 1151 Intel B360 ATX (7B25-001R)" which is a version 2 of that socket that will let me run cpus with 8c/16t's. The MB has 18 slots.

An analysis by another Setizen is there are bottlenecks in the board design that won't let me run 18 gpus at full Seti@Home speed.

Tom
46) Message boards : The Lounge : Best Mining Motherboards for BOINC? (Message 95441)
Posted 22 Jan 2020 by Profile Tom M
Post:
I am looking for (in the near future) an easy to setup mining rack for 18 or more Gpus.

Do you have any opinions? First hand experience?

Thank you.

Tom
47) Message boards : The Lounge : Best Mining Motherboards for BOINC? (Message 95439)
Posted 22 Jan 2020 by Profile Tom M
Post:
Hi,
I wanted to start this thread here because it has been fruitful on the Seti@Home forum.

Tom
48) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95438)
Posted 22 Jan 2020 by Profile Tom M
Post:

ps. The main website is still down so I presume the DB re-org is still munching along.


Just got one of my secondary systems back on line so it is munching WCG and E@H.

Tom

Must be time to get another round in then.



Yup. Or the perform the bane of the drinking man.



Go to Work!

Tom
49) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95436)
Posted 22 Jan 2020 by Profile Tom M
Post:

ps. The main website is still down so I presume the DB re-org is still munching along.


Just got one of my secondary systems back on line so it is munching WCG and E@H.

Tom
50) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95435)
Posted 22 Jan 2020 by Profile Tom M
Post:
I have successfully set World Community Grid to 0.0001 resources. I remember it not accepting "0".

I suppose I should check that again. If I can get that setup then I could use the relatively well behaved Einstein@Home gpu tasks and use the World Community Grid cpu tasks as the backups on my 100% Seti box.

It wouldn't get so bored....

Most of my boxes run a mix of Seti@Home on the gpus and WCG on the cpus. My bias is towards supporting Seti@Home but I want to be directly "socially conscious" and WCG allows me to do that. It is a project aggregator so I get a wide mix.

Tom
ps. The main website is still down so I presume the DB re-org is still munching along.
51) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95412)
Posted 22 Jan 2020 by Profile Tom M
Post:
Are there any other BOINC projects besides E@H that will allow a resource "0" so they will only run as a backup project?

Tom
52) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95411)
Posted 22 Jan 2020 by Profile Tom M
Post:
Got home a bit ago.... where is my megaphone and lighter.......


Tom
53) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95410)
Posted 22 Jan 2020 by Profile Tom M
Post:
We are at the 6 hour mark. We start howling at the moon soon.

To help us with the howling I'll ask my neighbor if their two Beagles can "sing" for us.


Sounds like a real "howler" of an Act.

Tom
54) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95409)
Posted 22 Jan 2020 by Profile Tom M
Post:
I can FINALLY get back in here!!!

FRAKKING Double Outrage!!! Couldn't get in here for the PAST HOUR!
Firefox kept giving me:

"Secure Connection Failed

An error occurred during a connection to boinc.berkeley.edu. PR_END_OF_FILE_ERROR

The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem."

AND:

"Is it Down or Just Me" was telling me that "BOINC is TOTALLY DOWN!"

Glad to see this place back up and running.

+1


TL
55) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95178)
Posted 16 Jan 2020 by Profile Tom M
Post:
Time for some adult liquid refreshments.

SETI Servers are back to life. We need to celebrate!


Too soon..... I just got a "project down" message.

I am going to NNT and let the backup projects have another night of it.

Tom
56) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95118)
Posted 15 Jan 2020 by Profile Tom M
Post:
Maybe they are replacing the hard disks. And something hiccuped?

Ok, Ok. I still had some Seti-Beta cpu tasks left so I lifted the processing limit on them.
My #2 project is World Community Grid so I switched it to "maximum" production (its a cpu-only aggregator). And then I went to the E@H website and turned off everything that was cpu-based (at least in the title) so my poor gpus will get something.

Looks like the system is fully committed...

If you want to try something "different" on your cpu's try: https://join.worldcommunitygrid.org?recruiterId=1027297&teamId=4WZJMC7X02
I recommend that if/when you want WCG to play nicely with Seti@Home you use the custom setting and limit the tasks down to 4-8 per project. Then set a maximum_concurrent_tasks(sp?) to the # of threads you are willing to devote to it.
The link causes you to be registered as "my recruitment" but otherwise should jump you directly in there.

Tom
57) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95116)
Posted 15 Jan 2020 by Profile Tom M
Post:
If things are not fixed soon Einstein here I come.


I am running some Collatz for now.


+1
58) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 95065)
Posted 14 Jan 2020 by Profile Tom M
Post:
Maybe a long outage will be good for the server so it isn't so "cranky" (like an Adelecent wolf howling at the moon?).

Since I just swapped cpus last night and I came home and baby was locked up. So I got "plenty" of stuff left :(

Tom
59) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 94549)
Posted 25 Dec 2019 by Profile Tom M
Post:
it's up?!?



Sorta. The website is back up. And they have reverted to the previous version of the server. But not everything was "up" and running.

Tom
60) Message boards : The Lounge : The Seti is Slumbering Cafe (Message 94535)
Posted 24 Dec 2019 by Profile Tom M
Post:
It has been 8 hrs and it is time!



It is the time of the "hot head" right? With the Wolf Aria in the background?

Tom


Previous 20 · Next 20

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.