Posts by jay

61) Message boards : Questions and problems : How to turn off screensaver entries in stdoutscr.txt?? (Message 59080) Posted 30 Dec 2014 by jay_e Post: I did experiment with setting the <scrsave_debug> flag. with scrsave_debug = 1 ( set by "BOINC Diagnostic Log Flags" and verified in cc_config.xml and screensaver active - the bulk of the logs entries are like: [12/29/14 15:10:33] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:33] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:33] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:34] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:34] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:34] TRACE [3928]: CScreensaver::InputActivityProc - Heartbeat. [12/29/14 15:10:34] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:34] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:35] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:35] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:35] TRACE [1464]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 15:10:35] TRACE [3928]: CScreensaver::InputActivityProc - Heartbeat. 947 KB in about an hour I tried turning the flag back off; looking at the logs; turning the flag on and looking again.. The logs did not stop. The number of messages between heartbeats increased and an error code started. [12/29/14 17:43:43] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:43] TRACE [856]: CScreensaver::InputActivityProc - Heartbeat. [12/29/14 17:43:43] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:43] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:43] TRACE [1352]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/29/14 17:43:43] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:44] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:44] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:44] TRACE [856]: CScreensaver::InputActivityProc - Heartbeat. [12/29/14 17:43:44] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:44] TRACE [1352]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/29/14 17:43:44] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:45] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:45] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER [12/29/14 17:43:45] TRACE [1352]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/29/14 17:43:45] TRACE [856]: CScreensaver::InputActivityProc - Heartbeat. [12/29/14 17:43:45] TRACE [1280]: CScreensaver::SaverProc Received WM_TIMER Hope this may help.. Thanks again, Jay
62) Message boards : Questions and problems : How to turn off screensaver entries in stdoutscr.txt?? (Message 59069) Posted 29 Dec 2014 by jay_e Post: Thanks Jord!!! Jay
63) Message boards : Questions and problems : Ubuntu Linux with GeForce GT 630 - No usable GPUs found (Message 58885) Posted 23 Dec 2014 by jay_e Post: Hi Klaus, was "No usable GPUs found" in the BOINC event log at start up? I have a Radeon/ATI card, and use Debian and Ubuntu. I get that message at boinc start up in the event log. I work around the problem by restarting the boinc-client with a sudo /etc/init.d/boinc-client restart Perhaps, this will work for you... Jay
64) Message boards : Questions and problems : BOINC 7.4.27 x64 fails to connect to world community grid project (Message 58882) Posted 22 Dec 2014 by jay_e Post: Hi I had the same problem. I used the command line to attach.. first go to your wcg account on the web and get your External Authorization Code. it is under settings -> profile Then, get a terminal window and issue the command boinccmd.exe --project_attach http://www.worldcommunitygrid.org [your code] Since the command line worked, I'm not sure why the GUI didn't...But this will get you started.. Good fortunes, Jay -edit- add code section to show spaces clearly
65) Message boards : Questions and problems : How to turn off screensaver entries in stdoutscr.txt?? (Message 58872) Posted 22 Dec 2014 by jay_e Post: Greetings, My stdoutscr.txt is inundated with screensaver log entries I was using the stable build (7.4.27) - then tried the daily build to see if the problem was fixed. It wasn't. I'm now running windows Vista and BOINC version 7.4.36 (x64) Only the default logging flags are set: File_xfer task sched_ops when I installed the daily build, I used windows to uninstall BOINC first when I installed the daily build, I did not choose the install screensaver option. I was puzzled when checked the Windows Vista screensaver setting - and saw the BOINC screensaver had been enabled Before, while I was on the 7.4.27. I was able to stop the logging by changing the screen saver to the Windows floating text - something other than the BOINC screensaver. But after I installed the daily - 7.4.36 - the BOINC screensaver was configured (though not selected during BOINC install) and I get 2 GB of logging in a day or two - 3 to 5 events a second logged, and the BOINC screensaver was re-enabled over my previous choice. Is this a known bug? Or my fault? -edit-- The main question is: How do I turn this logging off??? -- end edit -- Temporarily, I can stop the logging by configuring a different screensaver. T H A N K Y O U !!! Jay PS I wanted to add a sample of the logs - but I lost my paste buffer. Now, I can't reproduce the problem. I'll reboot and try to add an example in a posting edit. --- edit---- Here log example - while screensaver was running... [12/22/14 13:46:47] TRACE [4736]: CScreensaver::DataManagementProc - ErrorMode = '1', ErrorCode = '82000008' [12/22/14 13:46:47] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:47] TRACE [4736]: launch_default_screensaver C:\Program Files\BOINC\\boincscr.exe returned 0 [12/22/14 13:46:47] TRACE [4736]: CScreensaver::UpdateErrorBoxText - HRESULT '-2113929208' Updated Text 'BOINC screensaver loading' [12/22/14 13:46:47] TRACE [4356]: CScreensaver::SaverProc Received WM_SETCURSOR [12/22/14 13:46:47] TRACE [4296]: CScreensaver::InputActivityProc - Heartbeat. [12/22/14 13:46:47] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:47] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:47] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:48] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:48] TRACE [4736]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/22/14 13:46:48] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:48] TRACE [4296]: CScreensaver::InputActivityProc - Heartbeat. [12/22/14 13:46:48] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:48] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:49] TRACE [4736]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/22/14 13:46:49] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:49] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:49] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:49] TRACE [4296]: CScreensaver::InputActivityProc - Heartbeat. [12/22/14 13:46:49] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:50] TRACE [4736]: CScreensaver::DataManagementProc - ErrorMode = '0', ErrorCode = '82000008' [12/22/14 13:46:50] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:50] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:50] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER [12/22/14 13:46:50] TRACE [4356]: CScreensaver::SaverProc Received WM_TIMER .... repeats every second while screensaver running ........
66) Message boards : Questions and problems : New Install on Ubuntu - BOINC misses click events (Message 58005) Posted 21 Nov 2014 by jay_e Post: Ah-Hah! Thank you!! I can work around it - just annoying. Very glad to hear that its probably not something I messed up - (I'm very good at that.) I'll keep a lookout for a newer BOINC PPA.. Many thanks to Locutus of Borg.... https://launchpad.net/~costamagnagianfranco/+archive/ubuntu/boinc Thanks again, Jord, Jay
67) Message boards : Questions and problems : BOINC Client (Ubuntu) config problems when using account manager (Message 58002) Posted 21 Nov 2014 by jay_e Post: Hi, I don't disagree with the above discussions - but would like to ask if adding a project with "add project" instead of "account Manager" would avoid the problem? Respectfully, Jay
68) Message boards : Questions and problems : CLInfo says I have OpenCL 1.2, so what do I do next? (Message 57998) Posted 21 Nov 2014 by jay_e Post: Hi, Are you trying to run a GPU WU? Did the event log complain about not finding an OpenCL library?? Are you running Linux or windows? You may need to make a symbolic link. Jay
69) Message boards : Questions and problems : New Install on Ubuntu - BOINC misses click events (Message 57989) Posted 21 Nov 2014 by jay_e Post: Greetings... Not sure what is going on. I wiped out Ubuntu Studio 14.04.01 LTS (was using boinc 7.2.43) and did a fresh install of Ubuntu Studio 14.10. I believe the default boinc for this version is 7.4.8. I encountered the problem tehere and used the boinc PPA to install BOINC 7.4.23. It also has the problem: I use advanced view. On the tasks page, if a select a task then select the suspend page, the task status does not change to suspended until I re-click on the task. If I click on the Projects Tab, nothing happens until I click again on projects. But, if I do not click on any items on the page. the pages will chang on a single click on the tab. If I do click/select an item on the projects or task pages, the first clcick is again lost. ?? Perhaps this is a wxwidgets problem with xfce in Ubuntu Studio?? Here is window environment/stuff... jay 3591 3339 0 13:06 ? 00:00:00 /bin/sh /etc/xdg/xfce4/xinitrc -- /etc/X11/xinit/xserverrc jay 3602 3591 0 13:06 ? 00:00:00 xfce4-session jay 3605 3339 0 13:06 ? 00:00:00 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd jay 3610 3602 0 13:06 ? 00:00:02 xfwm4 --display :0.0 --sm-client-id 24edc1dc2-615c-4d1b-983d-562b4d89c2e9 jay 3612 3602 0 13:06 ? 00:00:03 Thunar --sm-client-id 2448f921f-49f6-43ff-b7fc-51e6e8f8683a --daemon I'm stumped. I don't know where to start - other than to log in with a different window manager. I don't care for having all of the programs that get loaded with gnome - That is the sole reason I chose Ubuntu studio - which uses xfce. And there were no missing events in Ubunbtu Studio 14.04.1 Silly me. I thought upgrading to BOINC 7.4.23 would be easier in the new release if Ubuntu - where all of the packages were integrated... Suggestions?? Thanks, Jay E.
70) Message boards : Questions and problems : Tasks not running (Message 55004) Posted 23 Jul 2014 by jay_e Post: Greetings... On advanced view, goto tools-> computing preferences -> processor usage. be sure to check the box "While computer is in use". If that was the problem, recheck the Boinc settings on your account of the websites of your projects. I've had this problem when adding a new project - and the new preferences were downloaded. Good luck crunching.. Jay
71) Message boards : BOINC client : boinc-client VirtualBox (Message 54945) Posted 18 Jul 2014 by jay_e Post: Hi there, Recently, I added the "Atlas" project to a PC that has plenty of memory to run VirtualBox. On the same PC (running Ubuntu Linux with virtualbox 4.3.10-dfsg-1) I am running WCG and Einstein. I put in an app_config.xml to limit the the number of Atlas that are running at once: ... <max_concurrent>2</max_concurrent> ... I see this error in the task status: 'Waiting to run (Scheduler wait: VM job unmanageable, restarting later)' If I set all projects to "Won't get new tasks" , all running WU run to completion - EXCEPT the task mentioned above. If I exit boinc-manager and restart the boinc-client, Then the task completes. Is this a bug or a feature?? :-) I would like to see if I can get Atlas to play well with others. I realize that it may take a day or two for BOINC to get some run-averages. Meanwhile, I 'grew' the /var partition (with BOINC directory) from from 15 (or 20) GiB to 150GiB. Afterwards, another WU hung with the same status. This time, I didn't wait, just suspended all WU; stopped and restarted the manager and client. The 'stuck' task restarted and finished OK. I believe the error occurs when boinc does a task switch to another task taht was waiting. Another user helpfully suggested that I set the "switch between applications" to 99999 minutes. Yup. That works. I did want to pass the error by you to see if anyone is interested. Another user reported the same error in their team forum - but on the T4T task - which also uses VirtualBox. [from the _Rolling Stone_]: Suggestions? Love-letters? Advice? added logging? My gratitude and thanks, Jay
72) Message boards : The Lounge : Local Parties? (Message 50501) Posted 14 Sep 2013 by jay_e Post: I've spent some time reading the posts about increasing BOINC partcipation - and the excellent posts about the societal rewards of the projects. Computer users are willing to learn the ins and outs of Facebook to get an immediate reward of social interaction. Hmmm. Sounds like we need more parties !!! What do you think? Solicit users to meet at a bar , restaurant, park? Talk about their favorite projects? Ah, I see a problem. How to encourage new users and avoid "My xyz GPU can leave your ABC GPU in the dust' and associated conversations? Moderators? Ideas? Opinions? advice? Jay
73) Message boards : The Lounge : Not available (Message 50500) Posted 14 Sep 2013 by jay_e Post: Ouch. Recently had teeth extracted. The shockwave (and electro shock) sounds much worse. I was given 'versed', so I don't remember any pain. Best wishes! Jay
74) Message boards : Questions and problems : BOINC 7.0.25 High Priority Probelms (Message 48362) Posted 27 Mar 2013 by jay_e Post: Hi Claggy, Richard, Ageless and others who posted to this theme, I am afraid that I am still where I was when I posted on this last April. I am still running 7.0.28 with the 2+2 preferences but unless I restrict MW@H using the suspend and resume tactic it will kick SETI off and only run MW@H. I thought that if I gave it a few months to settle down then I would get back to 50/50 on both projects but this has not happened. Although the "high priority" tag for MW@H disappeared after 7.0.25 it is , in effect, behaving as if it was still there. Does anybody have any ideas? If so, thanks for posting them. John Hey there. I had written up some strange-looking observations about the n-Body-108 There is a MW forum that asked for input about their beta-program. [edit-clarify] see http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=3171 It explained a lot to me. I run Linux. (may not matter) I had set my BOINC preferences ( cpu % cores utilized) to 50 % and every other time a certain WU was downloaded the actual utilization went from 62.5% to 100% to 62.5% to 100% , etc..... I think this relates to your observations. Jay
75) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 48359) Posted 27 Mar 2013 by jay_e Post: First of all, stellar documentation of your experience! I don't have a solution for you at this point, but I am starting a similar build today. I'll let you know if I get my ATI7750 GPU running opencl work, and then we can compare notes... Ivan, how did it go? Did you find the clue? ( do a sudo /etc/init.d/boinc-client restart ) after every boot. I also posted in the WCG gpu forum. Many thanks to Katejacy http://www.worldcommunitygrid.org/forums/wcg/viewpostinthread?post=416167 And thanks to Jack and Rob. http://www.worldcommunitygrid.org/forums/wcg/viewthread_thread,34880 The three of them are trying to get a fix into the builds. Jay
76) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 48357) Posted 27 Mar 2013 by jay_e Post: hi Claggy, I missed the most important. I had posted it in the WCG - GPUforum . here it is But first. In another forum, another user responded with a solution; After reboot, you have to restart the client. That worked with that info, I found a post from 2010 in BOINCStats Yes, this have been a problem for over two years. The answer was that it had to do with GPU card initialization. But I had followed other posts and had added a 33 second delay. I started digging. I checked out the BOINC source and found where the error message was generated. Now the fun starts The error message - for Linux - is when a test for the file OpenCL.so is done. I scratched my head. That has nothing to do with card initialization - and getting code downloaded. Further test dealt with available memory - an had different error messages. I'm not above hacking. Since I could not easily trace the include files that set up the path, I just put links to the OpenCL.so all over the place. Yes. I did have the .so file - but the links did not help at all. I was still bugged. I saw one forum response that used the service command. I had been bit years ago with that since it has VERY limited env variables - like LD_LIBRARY_PATH So I thought that the different rc.[level 0 thru 7] that all had links to init.d/boinc-client were mangling each other. Call Gallagher! Hack away! I took out all of the links except one. That didn't work either. So. I'm still looking for the cause of the symptom. here is an initial start(from a while back): Tue 12 Mar 2013 04:37:55 PM EDT \| \| Starting BOINC client version 7.0.27 for x86_64-pc-linux-gnu Tue 12 Mar 2013 04:37:55 PM EDT \| \| log flags: file_xfer, sched_ops, task Tue 12 Mar 2013 04:37:55 PM EDT \| \| Libraries: libcurl/7.27.0 OpenSSL/1.0.1c zlib/1.2.7 libidn/1.25 librtmp/2.3 Tue 12 Mar 2013 04:37:55 PM EDT \| \| Data directory: /var/lib/boinc-client Tue 12 Mar 2013 04:37:55 PM EDT \| \| Processor: 8 AuthenticAMD AMD FX(tm)-8150 Eight-Core Processor [Family 21 Model 1 Stepping 2] Tue 12 Mar 2013 04:37:55 PM EDT \| \| Processor: 2.00 MB cache Tue 12 Mar 2013 04:37:55 PM EDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 popcnt aes xsave avx lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 nodeid_msr topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold Tue 12 Mar 2013 04:37:55 PM EDT \| \| OS: Linux: 3.5.0-25-generic Tue 12 Mar 2013 04:37:55 PM EDT \| \| Memory: 7.70 GB physical, 7.90 GB virtual Tue 12 Mar 2013 04:37:55 PM EDT \| \| Disk: 47.15 GB total, 40.54 GB free Tue 12 Mar 2013 04:37:55 PM EDT \| \| Local time is UTC -4 hours Tue 12 Mar 2013 04:37:55 PM EDT \| \| No usable GPUs found Tue 12 Mar 2013 04:37:55 PM EDT \| \| Config: GUI RPC allowed from: Tue 12 Mar 2013 04:37:55 PM EDT \| \| No general preferences found - using defaults Tue 12 Mar 2013 04:37:55 PM EDT \| \| Reading preferences override file Tue 12 Mar 2013 04:37:55 PM EDT \| \| Preferences: Tue 12 Mar 2013 04:37:55 PM EDT \| \| max memory usage when active: 3944.72MB Tue 12 Mar 2013 04:37:55 PM EDT \| \| max memory usage when idle: 7100.50MB Tue 12 Mar 2013 04:37:55 PM EDT \| \| max disk usage: 10.00GB Tue 12 Mar 2013 04:37:55 PM EDT \| \| don't use GPU while active Tue 12 Mar 2013 04:37:55 PM EDT \| \| suspend work if non-BOINC CPU load exceeds 25 % Tue 12 Mar 2013 04:37:55 PM EDT \| \| (to change preferences, visit the web site of an attached project, or select Preferences in the Manager) Tue 12 Mar 2013 04:37:55 PM EDT \| \| Not using a proxy Tue 12 Mar 2013 04:37:55 PM EDT \| \| This computer is not attached to any projects And here is a start after a boinc-client restart Tue 26 Mar 2013 07:03:52 PM EDT \| \| Starting BOINC client version 7.0.27 for x86_64-pc-linux-gnu Tue 26 Mar 2013 07:03:52 PM EDT \| \| log flags: file_xfer, sched_ops, task Tue 26 Mar 2013 07:03:52 PM EDT \| \| Libraries: libcurl/7.29.0 OpenSSL/1.0.1c zlib/1.2.7 libidn/1.25 librtmp/2.3 Tue 26 Mar 2013 07:03:52 PM EDT \| \| Data directory: /var/lib/boinc-client Tue 26 Mar 2013 07:03:52 PM EDT \| \| Processor: 8 AuthenticAMD AMD FX(tm)-8150 Eight-Core Processor [Family 21 Model 1 Stepping 2] Tue 26 Mar 2013 07:03:52 PM EDT \| \| Processor: 2.00 MB cache Tue 26 Mar 2013 07:03:52 PM EDT \| \| Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 popcnt aes xsave avx lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 nodeid_msr topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold Tue 26 Mar 2013 07:03:52 PM EDT \| \| OS: Linux: 3.8.0-13-generic Tue 26 Mar 2013 07:03:52 PM EDT \| \| Memory: 7.70 GB physical, 8.04 GB virtual Tue 26 Mar 2013 07:03:52 PM EDT \| \| Disk: 18.33 GB total, 16.27 GB free Tue 26 Mar 2013 07:03:52 PM EDT \| \| Local time is UTC -4 hours Tue 26 Mar 2013 07:03:52 PM EDT \| \| ATI GPU 0: Capeverde (CAL version 1.4.1741, 2048MB, 1710MB available, 2048 GFLOPS peak) Tue 26 Mar 2013 07:03:52 PM EDT \| \| OpenCL: ATI GPU 0: Capeverde (driver version 1084.4 (VM), device version OpenCL 1.2 AMD-APP (1084.4), 2048MB, 1710MB available) Tue 26 Mar 2013 07:03:52 PM EDT \| \| Config: use all coprocessors I did get a small chance to use my GPU for the WCGrid Help Conquer Cancer project. But it is projected to run out of GPU WU soon. My next step is to look through 3 years of BOINC problem reports and see what is there. Any suggestions? Thanks!! Jay PS, I'm currently using Ubuntu Raring 13.04 with the 'stock', non-free, fglrx: 2:9.010-0ubuntu2 and fglrx-amdcccle: 2:9.010-0ubuntu2 drivers GERONIMO!
77) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 48249) Posted 18 Mar 2013 by jay_e Post: Went to the AMD web site http://support.amd.com/us/gpudownload/Pages/index.aspx and got the latest "catalyst" driver and App sdk -- for LINUX. Boinc still did not recognize. An Ah-hah. a README in the SDK download said "Note: As of SDK 2.8, the AMD APP SDK GPU runtime is not supported. To get the APP GPU runtime file, install the Catalyst driver. The SDK 2.8 runtime supports only CPU hardware; it is installed under /opt/AMDAPP/ Recommandations for GPU user: Install 12.10 (or later) Catalyst driver then install SDK 2.8 to avoid the CPU RT files installation." The RT Libs are in the windows Catalyst. Not the linux ... But all I want is the Realtime libraries... :-( In hopes of a distribution with the ATI package needed with OpenCL, I have tried: Debian 6.06 Debian 6.07 Ubuntu 12.04-1 Ubuntu 12.04-2 UberStudent 2.0.4.1 (xfce) Kubuntu 12.10 (KDE) Lubuntu 12.10 (lxde) Results: The ubuntu installers did a better job of recognizing the video hardware. But I should be able to get the right Debian package for the video driver. Getting the openCL that MATCHES the verion of the fglrx on the video driver is problematic. Kubuntu lsmod gave radeon 895653 2 modinfo gave filename: /lib/modules/3.5.0-17-generic/kernel/drivers/gpu/drm/radeon/radeon.ko license: GPL and additional rights description: ATI Radeon author: Gareth Hughes, Keith Whitwell, others. ... and the firmware for the 7750 firmware: radeon/VERDE_rlc.bin firmware: radeon/VERDE_mc.bin firmware: radeon/VERDE_ce.bin firmware: radeon/VERDE_me.bin firmware: radeon/VERDE_pfp.bin ... But, still, BOINC didn't recognize the card. About the Debian packages for opencl.. Here is what I tried: aptitude search amd p boinc-amd-opencl - metapackage for AMD/ATI OpenCL-savvy BOINC client and manager p boinc-amd-opencl:i386 - metapackage for AMD/ATI OpenCL-savvy BOINC client and manager p fglrx-amdcccle-updates - Catalyst Control Center for the AMD graphics accelerators Note: the following was already installed - and BOINC did not see GPU. i A fglrx-amdcccle - Catalyst Control Center for the AMD graphics accelerators snag... root@pc-14-large:/home/jay# aptitude install boinc-amd-opencl The following NEW packages will be installed: boinc-amd-opencl{b} 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 15.2 kB of archives. After unpacking 110 kB will be used. The following packages have unmet dependencies: boinc-amd-opencl : Depends: amd-libopencl1 which is a virtual package. The following actions will resolve these dependencies: Keep the following packages at their current version: 1) boinc-amd-opencl [Not Installed] Accept this solution? [Y/n/q/?] y No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Oh, blah so. Try to treat boinc-amd-opencl as a pre-requisite. root@pc-14-large:/home/jay# aptitude install amd-libopencl1 No candidate version found for amd-libopencl1 No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Oh, not in the stable version. Will try (test version) later but first try libopencl1 root@pc-14-large:/home/jay# aptitude install libopencl1 Note: selecting "ocl-icd-libopencl1" instead of the virtual package "libopencl1" The following NEW packages will be installed: ocl-icd-libopencl1 0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Nothing. Nada. and now try the boinc again... Nope. sees amd-libopencl1 and libopencl1 as different. Punt. Try the boinc package: https://launchpad.net/ubuntu/precise/+package/boinc-amd-opencl Time to re-post and ask again. I still would like the fairly simple question to a user that has installed the OpenCL runtime on Linux (preferebly Debian) for ATI Radeon 7700 or 7800 or 7900 series - How did you do it? I welcome suggestions Jay PS for a primer on the name, wherefores and segfaults of the debian ATI packages, see: http://lists.debian.org/debian-devel/2012/06/msg01108.html Yes, this may be outdated biu it is a firm basis. THANKS, Vincent. PPS, If you manually load from the AMD webpage, you are the one to verify version compatibility - conformance. See http://developer.amd.com/tools/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/system-requirements-driver-compatibility/ I'll copy the table at the end of their page here Driver Conformance Download AMD Catalyst Drivers AMD APP SDK v2.8 ------------- AMD Catalyst™ 12.10 (9.002) AMD APP SDK v2.7 ------------- AMD Catalyst™ 12.4 (8.961) AMD APP SDK v2.6 ------------- AMD Catalyst™ 11.12 (8.92) AMD APP SDK v2.5 ------------- AMD Catalyst™ 11.7 (8.872) AMD APP SDK v2.4 ------------- ATI Catalyst™ 11.4 Update Driver (8.841) AMD APP SDK v2.3 ------------- ATI Catalyst™ 10.12 (8.801) ATI Stream SDK v2.2 ---------- ATI Catalyst™ 10.7 Update Driver for OpenCL™ 1.1 Support (8.753.1) ATI Stream SDK v2.1 ---------- ATI Catalyst™ 10.4 (8.723) ATI Stream SDK v2.01 --------- ATI Catalyst™ 10.2 (8.701) ATI Stream SDK v2.0 ---------- ATI Catalyst™ 9.12 (8.682)
78) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 47936) Posted 22 Feb 2013 by jay_e Post: Another ah-hah. I didn't see the AMD open CL because it was in testing - not the stable release. Get try it. Fail again BOINC did not recognize. Here are the details... ( Note: Georgia Tech is somewhat close to me and they have a backport mirror.. ) add to /etc/apt/sources.list # Backports deb http://debian.gtisc.gatech.edu/debian-backports squeeze-backports main non-free deb-src http://debian.gtisc.gatech.edu/debian-backports squeeze-backports main non-free verify package and install -- root@xxxx:/etc/apt# aptitude search amd-clinfo p amd-clinfo - AMD OpenCL utility root@xxxx:/etc/apt# aptitude install amd-clinfo The following NEW packages will be installed: amd-clinfo amd-libopencl1{a} amd-opencl-icd{a} 0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 35.7 MB will be used. Do you want to continue? [Y/n/?] y Looks good so far.. Reboot and restart BOINC.. Ugggh Fri 22 Feb 2013 03:34:18 AM EST No usable GPUs found OK, Does anyone know just what - and where BOINC looks for the file that is part of the openCL library?? Definitely time to quit for the day. Thanks agin, Jay
79) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 47935) Posted 22 Feb 2013 by jay_e Post: ...OH... I can't believe I did this. It OpenCL not OpenGL. OK. Punt. Doesn't look like I can get Open CL for Debian and AMD Debian (Squeeze) does have Nvidia drivers built into their distribution: root@xxxx:/var/log# aptitude search openCL v lib32opencl1 v libopencl1 v libopencl1-dev p nvidia-libopencl1 - NVIDIA OpenCL library p nvidia-libopencl1-dev - NVIDIA OpenCL development files p nvidia-libopencl1-ia32 - NVIDIA OpenCL 32-bit library p nvidia-opencl-common - NVIDIA OpenCL driver p nvidia-opencl-icd - NVIDIA OpenCL ICD p nvidia-opencl-icd-ia32 - NVIDIA OpenCL ICD (32-bit) v opencl-icd - I tried the non-nvidia-named open cli.. NOPE. It went to the Nvidia.... root@xxxx:/var/log# aptitude install libopencl1 Note: selecting "nvidia-libopencl1" instead of the virtual package "libopencl1" The following NEW packages will be installed: libcuda1{a} libnvidia-compiler{a} nvidia-kernel-2.6.32-5-amd64{a} nvidia-kernel-common{a} nvidia-libopencl1 nvidia-opencl-common{a} nvidia-opencl-icd{a} nvidia-smi{a} 0 packages upgraded, 8 newly installed, 0 to remove and 0 not upgraded. Need to get 13.4 MB of archives. After unpacking 40.3 MB will be used. Do you want to continue? [Y/n/?] n Abort. OK. Please advise. Maybe I can take my AMD GPU card back and try a Nvidia that has support for Open CL.. Next hurdle. Does anyone if the libraries above satisfy BOINC's check for an Open CL library?? Thanks. Time for a beer. Jay
80) Message boards : GPUs : Installing driver for HD7750. What am I missing? (Message 47934) Posted 22 Feb 2013 by jay_e Post: Hm. No Bites. Yet. I went back and re-read wiki.debian.org/ATIProprietary. The wiki listed instructions for squeeze. These said to install fglrx - driver and -control with headers to the current kernel. Did these. installed without a hitch. Reboot. Did not get to the GDM login screen. log had repeated crashes. Removed fglrx installed standard ati video. the video now works - BUT BOINC says Fri 22 Feb 2013 12:54:37 AM EST No usable GPUs found (argh) I went back and installed freeglut3 No recognition Installed just about everything that mentioned Open GL Still no recognition from BOINC. Any suggestions??? Thanks, Jay PS, Here is what xorg.o.log says ((Markers: (--) probed, (*) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. )) X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian Current Operating System: Linux pc-14-large 2.6.32-5-amd64 #1 SMP Fri Feb 15 15:39:52 UTC 2013 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=e79f4c23-2e17-44d4-939c-66c2ab6243a4 ro quiet Build Date: 29 October 2011 06:58:14PM xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) Current version of pixman: 0.16.4 ... (--) PCI:(0:1:0:0) 1002:683f:1682:3248 ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 ... (==) Matched ati as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "ati" (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so (II) Module ati: vendor="X.Org Foundation" compiled for 1.7.7, module version = 6.13.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "radeon" (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so (II) Module radeon: vendor="X.Org Foundation" compiled for 1.7.7, module version = 6.13.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Mobility Radeon X1700, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, [sic - the list repeats this entries.] ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400, ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon 4800 Series, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770, ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI RV670, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Mobility Radeon HD 5800 Series, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450, CEDAR (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" It looks like the Radeon HD series goes up to HD 5000 But not HD 7000. I'll try to focus on my question. I'm not gaming. I want the OpenGL to allow WCG - Help Conquer Cancer to run apps on the GPU. Does anyone know if this is possible in the current Linux? Or will I have to swallow a lot of pride and go buy Microsoft and install?? Thanks again! Jay

Previous 20 · Next 20

Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.

Posts by jay_e