Message boards : GPUs : client not detecting all GPUs on risers
Message board moderation
Author | Message |
---|---|
![]() ![]() Send message Joined: 27 Jun 08 Posts: 641 ![]() |
Been testing a 4-in-1 riser on motherboard that has only 4 slots. Windows sees the correct count: slot 1: 4-in-1 riser: GTX1060 (3gb), GTX1060(3gb), GTX1060(6gb slot3: RX-570 slot4: RX-570 Client does not see the 6gb nvidia board 1 6/27/2019 3:57:50 PM Starting BOINC client version 7.14.2 for windows_x86_64 2 6/27/2019 3:57:50 PM log flags: file_xfer, sched_ops, task 3 6/27/2019 3:57:50 PM Libraries: libcurl/7.47.1 OpenSSL/1.0.2g zlib/1.2.8 4 6/27/2019 3:57:50 PM Data directory: C:\ProgramData\BOINC 5 6/27/2019 3:57:50 PM Running under account jstateson 6 6/27/2019 3:57:53 PM CUDA: NVIDIA GPU 0: GeForce GTX 1060 3GB (driver version 430.86, CUDA version 10.2, compute capability 6.1, 3072MB, 2488MB available, 3936 GFLOPS peak) 7 6/27/2019 3:57:53 PM CUDA: NVIDIA GPU 1: GeForce GTX 1060 3GB (driver version 430.86, CUDA version 10.2, compute capability 6.1, 3072MB, 2488MB available, 3936 GFLOPS peak) 8 6/27/2019 3:57:53 PM OpenCL: NVIDIA GPU 0: GeForce GTX 1060 3GB (driver version 430.86, device version OpenCL 1.2 CUDA, 3072MB, 2488MB available, 3936 GFLOPS peak) 9 6/27/2019 3:57:53 PM OpenCL: NVIDIA GPU 1: GeForce GTX 1060 3GB (driver version 430.86, device version OpenCL 1.2 CUDA, 3072MB, 2488MB available, 3936 GFLOPS peak) 10 6/27/2019 3:57:53 PM OpenCL: AMD/ATI GPU 0: Radeon RX 570 Series (driver version 2841.5, device version OpenCL 2.0 AMD-APP (2841.5), 4096MB, 4096MB available, 5095 GFLOPS peak) 11 6/27/2019 3:57:53 PM OpenCL: AMD/ATI GPU 1: Radeon RX 570 Series (driver version 2841.5, device version OpenCL 2.0 AMD-APP (2841.5), 4096MB, 4096MB available, 5095 GFLOPS peak) 12 6/27/2019 3:57:54 PM Host name: jysdualxeon copro_info.xml file looks good but is missing the gtx1060 6gb board. ![]() for what it is worth, when I tried a 4th nvidia board gtx1070, windows device manager also missed the 6gb as well as the 1070. It knew there was something attached but could not recognized the device. |
![]() Send message Joined: 29 Aug 05 Posts: 15531 ![]() |
Does CLinfo.exe find all cards? https://boinc.berkeley.edu/dl/clinfo.zip |
![]() ![]() Send message Joined: 27 Jun 08 Posts: 641 ![]() |
Does CLinfo.exe find all cards? https://boinc.berkeley.edu/dl/clinfo.zip Will try later. I moved one of the NVidia boards out of the 4-in-1 and put it into that empty slot-2 and all 5 were recognized by boinc. This mombo, X8DTL-iF has a pair of x8 and a pair of x4 sockets. I will try the 4-in-1 in an x8 and see if that helps. This was actually pretty cheap as I got it for under 90 with a pair of xeons and fans three years ago before the mining craze took off. The 6-gpu frame cost me $19 but was a PITA to assemble. There is also a chance that it could have worked earlier as possible another reboot was needed. I need to do more testing before posting here. Usually the driver install requests a reboot but occasionally there is no notification. I will look at the clinfo. |
![]() ![]() Send message Joined: 27 Jun 08 Posts: 641 ![]() |
This is all working after all. I am guessing what happened was I failed to reboot after looking at the device manager and seeing 5 devices but only 4 show up in boinc. I did restart boinc but should have rebooted. However, I have also noticed that the riser x1 adapters have variations in manufacturer. Some fit loose in the socket to where their cable weight can tip them out. Others fit tight and require a good pull to remove. I would think that if the 4-in-1 was loose then all the devices would fail, not just one. Short Story: The 3 gtx1060 are all recognized in the 4-in-1 risers unlike when I first posted about the problem. |
Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation.