1)
Message boards :
Questions and problems :
boincmgr and libwx_gtk2u_html-2.8.so.0 => not found
(Message 76490)
Posted 16 Mar 2017 by Claggy Post: From Software prerequisites (Unix/Linux): http://boinc.berkeley.edu/trac/wiki/SoftwarePrereqsUnix since 7.4.0: wxWidgets 3.0.0 Try sudo apt-get install libwxgtk3.0-dev libwxgtk-webview3.0-dev You'll get the dev packages too, but you'll also get the normal packages. Claggy |
2)
Message boards :
Android :
BOINC Android app does not work on Asus Zenphone 2
(Message 76134)
Posted 25 Feb 2017 by Claggy Post: It appears that phone doesn't have an android processor, but an Intel processor. Boinc 7.4.x for Android is supposed to work on ARM, AArch64, MIPS, MIPS64, x86, and x86_64, There is no such thing as an android processor!! Android Boinc all downloads Claggy |
3)
Message boards :
Android :
BOINC Android app does not work on Asus Zenphone 2
(Message 76133)
Posted 25 Feb 2017 by Claggy Post: Hello, You don't say what version of Boinc you installed, I expect Boinc 7.4.53 You can try Boinc 7.4.43 from the Berkeley site instead, you may need to run though some hoops to get it to install this way, I think Boinc 7.4.53 has some issues with x86 processors. Claggy |
4)
Message boards :
BOINC client :
BOINC 7 development discussion thread.
(Message 75883)
Posted 13 Feb 2017 by Claggy Post: Since it's been five months since the 7.6 head has been worked on, and it was even earlier than when Boinc 7.6.33 was tagged, I've gone and Cloned the Boinc repository, tagged a 7.6.34 release, and done a pull request back at the Boinc repository, Claggy |
5)
Message boards :
Questions and problems :
BOINC Manager no longer starts at computer boot.
(Message 75806)
Posted 9 Feb 2017 by Claggy Post: Yes, it is checked. Try unchecking it, Fully exiting Boinc Manager (the client can be left running), restart Boinc Manager, recheck it, Shut down Boinc fully, then restart the host and see if it works. Claggy |
6)
Message boards :
Questions and problems :
Controlling number of threads used by BOINC
(Message 75737)
Posted 6 Feb 2017 by Claggy Post: My CPU has 4 cores, each capable of running 2 threads for 8 in total. So a Quad core with hyperthreading, making eight cores total. My BOINC settings regarding this are: You don't say what Boinc version you run, or what website you set your preferences on, the most recent Boinc's and website preferences only have two settings: Computing Usage limits The other setting was for Boinc 5 clients, and is no longer used. And in BOINC manager: Use GPU always. Use the term 'Tasks', Boinc will run enough tasks to occupy all your CPU cores and GPUs, subject to your preferences, and the application's requirements, each application may have more than one thread running, the OS or the app will decide which cores they'll run on, Boinc can run non-intensive applications too, adding to the number of Boinc related threads running, so don't use the term threads unless you're counting them up in Task Manager or the like. Claggy |
7)
Message boards :
Questions and problems :
Changing from one account to another ? How ?
(Message 75565)
Posted 30 Jan 2017 by Claggy Post: In Boinc Manager, go to the projects tab, click on Seti@home, then click on Remove, Then add Seti@home again using your different account. There is a way of linking a new account, and a Seti Classic account together: http://setiathome.berkeley.edu/sah_classic.php Claggy |
8)
Message boards :
Android :
Android BOINC client
(Message 75554)
Posted 29 Jan 2017 by Claggy Post: On my BOINC version 7.4.41 on Android if I go to the Projects list and tap a project I get the Allow new tasks/No new tasks as an option in the menu ! And it's the same on Boinc 7.4.53 for Android. Claggy |
9)
Message boards :
GPUs :
clinfo.exe wrong values for CL_DEVICE_ADDRESS_BITS
(Message 75184)
Posted 10 Jan 2017 by Claggy Post: Check in %SYSTEMDRIVE%:\Windows\System32 as there may be a more up-to-date clinfo.exe in there, deposited by the Nvidia or Intel drivers. Or AMD, I'm sure it's an AMD file. Claggy |
10)
Message boards :
BOINC Manager :
New BOINC Interface?
(Message 74733)
Posted 11 Dec 2016 by Claggy Post: There is only one proper active Boinc Dev at the moment, as their funding ran out, and there isn't a Donate Button for Boinc development as projects have!!! So if you want this interface, you'll have to grab the source code, do the coding, then submit the changes yourself. Claggy |
11)
Message boards :
Questions and problems :
BOINC not uploading or downloading SETI@Home tasks
(Message 74505)
Posted 30 Nov 2016 by Claggy Post: Anything else I might look for and/or try? Try restarting any routers or hubs or switches that the probmatic host is connected to. Claggy |
12)
Message boards :
Questions and problems :
app_config.xml
(Message 72911)
Posted 4 Oct 2016 by Claggy Post: Where does this file reside in MacOS? In the project directory of each project that you have created it in, If you haven't created any then you won't have any. Claggy |
13)
Message boards :
Android :
No New Tasks after completing several task sets
(Message 70661)
Posted 3 Jul 2016 by Claggy Post: it is just the Android 6.0.1 that is being troublesome. What Boinc version?, and what does the Boinc startup say in the Event Log? Claggy |
14)
Message boards :
Questions and problems :
Remaining estimated (time) doubles during run
(Message 70544)
Posted 28 Jun 2016 by Claggy Post: We need dcf at app level... something asked for since years, to return the client side buffer estimation functionality. The Dev's said it couldn't or wouldn't be done, Jason G went and did an experimental Boinc 6.10.58 with it implemented, worked fine, Dev's still weren't interested. Claggy |
15)
Message boards :
Questions and problems :
Remaining estimated (time) doubles during run
(Message 70527)
Posted 28 Jun 2016 by Claggy Post: Einstein runs old Boinc server software, it still uses 'Task duration correction factor', while other projects use 'Average processing rate', There is only one DCF per project, so each each different application type from a project bumps the runtime up or down as DCF alters, it can't be very accurate, not without a lot of project fiddling of the different task type's <rsc_fpops_est> values. Claggy |
16)
Message boards :
GPUs :
GPUs recognized, but no work is being assigned to them?
(Message 69107)
Posted 22 Apr 2016 by Claggy Post: 16: 22-Apr-2016 12:36:07 (low) [] calInit() returned 1 Or PrimeGrid fixes their apps to not require CAL support, or fix their planclasses to not require CAL support. Claggy |
17)
Message boards :
Questions and problems :
Nvidia gpu not found
(Message 69078)
Posted 19 Apr 2016 by Claggy Post: Can someone point me in the correct direction to troubleshoot ? First of all please say what OS this is on, Windows, OS X, or Linux, Actually posting the Boinc startup helps. When requesting help on these forums. Claggy |
18)
Message boards :
Questions and problems :
Multibrand GPUs BOINC Manager confused
(Message 69077)
Posted 19 Apr 2016 by Claggy Post: Few weeks past, I tried GPUGRID for secondary GPU. As long as I resume GPUGRID, BM stops getting works for Collatz, when I suspend GPUGRID, BM starts getting tasks for Collatz. After restart I get vice versa results, but BM should be controlled manually to get works for both GPUs! The main purpose of BOINC manager is to manage works automatically, instead I need to control it manually. Boinc Manager is the GUI, With it, you view and control what the Boinc Client does, nothing more, What you're effectively saying is (using a example) 'My House is cold, i can't get it lit', when you mean to say is 'My house is cold, i can't get the fire/boiler lit' Claggy |
19)
Message boards :
BOINC Manager :
BUG: Windows: Please fix Sys Tray Icon -- no right-click menu
(Message 66683)
Posted 8 Jan 2016 by Claggy Post: What version of Boinc? Claggy |
20)
Message boards :
GPUs :
Help Request: GPU Detection and GFLOPs
(Message 66655)
Posted 8 Jan 2016 by Claggy Post: Before: 08-Jan-2016 04:55:48 [---] Starting BOINC client version 7.6.22 for windows_x86_64 Afterwards: 08/01/2016 04:59:57 | | Starting BOINC client version 7.7.0 for windows_x86_64 Claggy |
21)
Message boards :
Questions and problems :
Seti@home
(Message 66646)
Posted 7 Jan 2016 by Claggy Post: That question is best asked at the Seti project forum, probably in Number Crunching. Claggy |
22)
Message boards :
Questions and problems :
Suggestions wanted of buying a new Netbook for BOINC use (not solely)
(Message 66150)
Posted 15 Dec 2015 by Claggy Post: Netbooks, I think mostly Intel Atom powered have gone out of fashion now Claggy |
23)
Message boards :
Questions and problems :
Runing issue.
(Message 65926)
Posted 9 Dec 2015 by Claggy Post: 09/12/2015 23:11:41 | SETI@home | Task 05jn15aa.25293.8656.438086664204.12.200_0 is 90.48 days overdue; you may not get credit for it. Consider aborting it. Your tasks are late, they have been completed by your wingmen, reissued to new wingmen because your results were late, then validated, and purged (removed) from the Boinc database, You might as well abort any tasks you have on board, and get fresh tasks. Claggy |
24)
Message boards :
Questions and problems :
Runing issue.
(Message 65918)
Posted 9 Dec 2015 by Claggy Post: When did you receive this work from Seti? Is it past it's due date? It is possible it has been completed by other wingmen, validated, then purged from the database. Please post your Boinc startup from the Event Log, the first 50 lines should do. Claggy |
25)
Message boards :
Questions and problems :
Error finding data directory (Mac)
(Message 65863)
Posted 7 Dec 2015 by Claggy Post: Check the Boinc startup in the Event Log, it should tell you exactly where the Boinc Data directory is, On Windows it's a hidden directory, expect it's the same on a Mac. Claggy |
26)
Message boards :
Questions and problems :
BOINC 7.6.9 downloads but won't launch in order to install
(Message 65556)
Posted 22 Nov 2015 by Claggy Post: Aside: I'm "subscribed" to this thread, once because I clicked on the "Subscribe" button, and, I suspect, also because of my posts, but I've gotten NO emails to tell me about new posts here. Is something amiss with that feature of these boards? What have you got your preferences set to: http://boinc.berkeley.edu/dev/edit_forum_preferences_form.php Claggy |
27)
Message boards :
Questions and problems :
I can't open the BOINC manager?
(Message 65548)
Posted 21 Nov 2015 by Claggy Post: Like I said before you posted again: And to back it up, Pogs's Server Status page Tasks ready to send 0 And the task page for his host: http://pogs.theskynet.org/pogs/results.php?hostid=620401 Claggy |
28)
Message boards :
Questions and problems :
BOINC 7.6.9 downloads but won't launch in order to install
(Message 65476)
Posted 17 Nov 2015 by Claggy Post: Hope you downloaded the correct version, i.e. the 32bit version of the installer as I'm sure the 64bit version will not work on XP. Else try this one https://boinc.berkeley.edu/dl/boinc_7.6.9_windows_intelx86.exe Unless it's XP 64 bit!!! Claggy |
29)
Message boards :
Questions and problems :
BOINC 7.6.9 downloads but won't launch in order to install
(Message 65458)
Posted 17 Nov 2015 by Claggy Post: If you would like to give a chance for a newer test version, there's 7.6.15 : But that runs the client at a reduced priority, making Boinc/Boinc Manager and application performance suffer, not an adviceable upgrade until the developers back out of those changes. Claggy |
30)
Message boards :
GPUs :
Want to compute on GPU 760 GTX and on GPU from APU too
(Message 65287)
Posted 6 Nov 2015 by Claggy Post: What does the Boinc startup from the Event Log show? Claggy |
31)
Message boards :
Projects :
Universe@Home android app
(Message 65269)
Posted 4 Nov 2015 by Claggy Post: BOINC will auto-update the list. You may need to restart the client, though. Not sure. I just opened it and had the new list. Checked my Samsung S5 mini host running Boinc 7.4.41, Universe@Home is also shown. Claggy |
32)
Message boards :
Questions and problems :
Using a Windows 10 Laptop with BOINC programs
(Message 65091)
Posted 26 Oct 2015 by Claggy Post: Currently, I can't see it - which log file, should I expect to see the details? Ctrl+Shift+E or Tools > Event Log. Claggy |
33)
Message boards :
Questions and problems :
Using a Windows 10 Laptop with BOINC programs
(Message 65089)
Posted 26 Oct 2015 by Claggy Post: Some years ago, I bought a Samsung N220 laptop, with Windows 7 (Home version) on it, for general use - I updated it to 2048 MB RAM, the maximum allowed. I added some BOINC programs to it and everything seemed fine. For clarification, a Samsung N220 isn't a Laptop, But a Netbook, powered by an Intel Atom N450 processor, I have one myself, It is hardly the speediest thing out there. 26/10/2015 18:31:31 Starting BOINC client version 6.10.58 for windows_intelx86 Please post your Boinc startup from the Event Log. Claggy |
34)
Message boards :
Projects :
ClimatePrediction.Net (AKA CPDN) NEWS
(Message 65073)
Posted 24 Oct 2015 by Claggy Post: Did the project servers go down? I received 3 tasks, which have since completed, but the data refuses to upload. It will say 'uploading' for about 2 or 3 minutes, upload no data, then 'attempt to retry in [several hours]'. Meanwhile I have 11 days 39 hours worth of data sitting on the computer. I don't want to abort it and have it go to waste... Have a read of the News on Project Outages thread. Claggy |
35)
Message boards :
Questions and problems :
Missed deadline
(Message 64775)
Posted 8 Oct 2015 by Claggy Post: To force uploads, open BOINC Manager, Advanced view, Projects tab, select the project of choice and click Update. The Update command will immediately upload any outstanding uploads, download outstanding downloads and report any work ready to report. Don't think doing that forces uploads, Try doing a 'Retry pending transfers' instead. Claggy |
36)
Message boards :
Projects :
Orbit@Home Revival Imminent?
(Message 64759)
Posted 7 Oct 2015 by Claggy Post: The homepage isn't even showing anymore when they will be back online :( NASA doesn't consider it a big risk, b612 foundation lost it funding, what hope does orbit@home have?: B612 Foundation Loses Partnership With NASA; Asteroids Not a Significant Risk Claggy |
37)
Message boards :
GPUs :
GPU tasks not following overclock/underclock settings?
(Message 63973)
Posted 1 Sep 2015 by Claggy Post: Please post the Boinc startup from the Event Log, then we can see what Boinc actually detects, What projects you're attached to, the host id's at those projects, and history of what tasks your host has managed to run, etc. Claggy |
38)
Message boards :
Questions and problems :
only 20 percent CPU?
(Message 63925)
Posted 30 Aug 2015 by Claggy Post: Use at most N% of the CPUs set to 90% only dropped the number of tasks from 9 to 8. It still won't use more than 20-25% or so. I don't think anything is overworked. It's more like under-worked...? I don't know why. Sounds like an OS side scheduling problem, rather than a Boinc problem, If Boinc starts 7 or 8 CPU tasks, the OS should schedule them across the available CPU cores. Claggy |
39)
Message boards :
Projects :
News on Project Outages
(Message 63865)
Posted 27 Aug 2015 by Claggy Post: Radioactiveathome has been down for quite a few days, their website is unreachable: http://radioactiveathome.org/ Claggy |
40)
Message boards :
Questions and problems :
Win 10 GPU keeps restarting, Tasks Using GPU Record Time Increment but no Progress
(Message 63864)
Posted 27 Aug 2015 by Claggy Post: The only way to resolve such errors is to try different drivers until you find one that's more solid than the rest. Or find you why the app is driving the Video card so hard, and fix that. This is a project GPU application problem, please tell us what project this is with, and what application. Claggy |
41)
Message boards :
Questions and problems :
Windows 10 DirectX problem with BOINC
(Message 63399)
Posted 4 Aug 2015 by Claggy Post: Hint: When requesting help on these forums. Claggy |
42)
Message boards :
Projects :
News on Project Outages
(Message 63285)
Posted 28 Jul 2015 by Claggy Post: Seti@Home News: The Seti Beta project is still up through. Claggy |
43)
Message boards :
Questions and problems :
Why is BOINC not actually using all processors in my computer today?
(Message 63281)
Posted 28 Jul 2015 by Claggy Post: Thanks @tanstaafl9999 - I suspected that that was the reason, and then your comment made it seem even more likely. When you find less tasks being run, increase the following preferences and see if more tasks are started: When computer is in use, use at most 80% Claggy |
44)
Message boards :
Questions and problems :
Boinc manager not recognizing project
(Message 63158)
Posted 21 Jul 2015 by Claggy Post: Seti is back up after it's weekly maintenance. Claggy |
45)
Message boards :
Questions and problems :
Boinc manager not recognizing project
(Message 63138)
Posted 21 Jul 2015 by Claggy Post: It's Tuesday, Setiathome is down for Maintenance, try updating the project in 6 hours or so. http://setiathome.berkeley.edu/index.php Weekly Outage and Initial Catch Up Claggy |
46)
Message boards :
Android :
Way to set CPU utilization?
(Message 63102)
Posted 17 Jul 2015 by Claggy Post: What type of surface is the device sitting on? Claggy |
47)
Message boards :
Android :
Way to set CPU utilization?
(Message 63095)
Posted 17 Jul 2015 by Claggy Post: Thanks, that did the trick. But now I am seeing a weird behavior where the tasks all swap from running to suspended over and over. I think this is because I limited the CPU usage and the UI is showing suspending rather than just sleeping or something. I will let it run this way overnight and see how it performed (and how hot it got). Make sure the CPU limit is set to 100% (Limits the time BOINC uses for computation), if need be run less cores to keep the heat down. Also make sure 'Pause at CPU usage above' is set to 0%, this is most probably why it's shown as suspended, I known the battery limits keep the app in memory, unsure about the other limits, some do, some don't. Claggy |
48)
Message boards :
Questions and problems :
7.4.42 (X64) -> unusable computer
(Message 63090)
Posted 16 Jul 2015 by Claggy Post: I somehow suspect you're screwed up your Boinc installation somehow, probably some of the slot permissions aren't set correctly: 2015-07-16 16:05:27 | | Data directory: D:\BOINC\Data In June the Seti v7 v7.03 r1831 app was failing to build it's compilations: <core_client_version>7.4.42</core_client_version> Late June the Seti v7 v7.03 app was running correctly (Note this app had api Bug where it didn't suspend properly when it was supposed to, ie when in use). Beginning of July the Seti v7 7.00 CPU app was failing to even run: <core_client_version>7.4.42</core_client_version> Over the last couple of days you're completed a couple of Seti v7 v7.07 and AP v7 7.09 tasks O.K, But you then errored a Seti v7 7.07 task with a too large a finish file, where the app completed the Wu, then restarted it: <core_client_version>7.4.42</core_client_version> Try doing a Boinc repair installation (rerun the installer), and/or a fresh Boinc Installation, and maybe Boinc 7.6.6, also try not to use the '25% CPU-time' setting, try 100%, and let it suspend when in use, and greater than 5% CPU instead. And to reforce all that, the rosetta app can't start: <core_client_version>7.4.42</core_client_version> Claggy |
49)
Message boards :
Android :
Way to set CPU utilization?
(Message 63083)
Posted 16 Jul 2015 by Claggy Post: On the device itself (web computing preferences aren't utilised on the Android Boinc), Open Boinc, go to 'Preferences', hit the 'Show advanced preferences and controls' tickbox, then scroll down and change the 'Used CPU cores' to what you want. Claggy |
50)
Message boards :
Questions and problems :
7.4.42 (X64) -> unusable computer
(Message 63072)
Posted 14 Jul 2015 by Claggy Post: Please post the Boinc startup from the Event Log, the first 30 lines or so will do. Claggy |
51)
Message boards :
Questions and problems :
Raspberry Pi questions. Speed, overclocking, and simultanious WUs
(Message 63000)
Posted 11 Jul 2015 by Claggy Post: Projects that support the Pi are Asteroids and Einstein. Claggy also did a Seti Multi-beam app but you'll need to do some fiddling to get it working. Asteroids have an old app for the original Pi which doesn't have NEON support and work units take too long on the Pi/Pi2 now. Einstein tasks are smaller and their app, if you run an up-to-date BOINC client, will use NEON. If you run the old BOINC client you get the old app which is much slower. Eric has released a freshly compiled r2929 app by myself at Seti Beta, only two and a half days ago. Claggy |
52)
Message boards :
GPUs :
no GPU work fetched whn fetch minimal flag set
(Message 62896)
Posted 3 Jul 2015 by Claggy Post: 7/2/2015 11:53:57 PM | | [work_fetch] ------- start work fetch state ------- That means the 'Use CPU' project preference at Setiathome is set to 'No'. Claggy |
53)
Message boards :
Questions and problems :
Computation error
(Message 62653)
Posted 23 Jun 2015 by Claggy Post: The support form you linked to wasn't one I could see. Straight under the search forums box it says 'If you have a question or problem, please use the Questions & Answers section of the message boards.' Claggy |
54)
Message boards :
Questions and problems :
Computation error
(Message 62626)
Posted 21 Jun 2015 by Claggy Post: I'm getting a lot of computation errors for projects I've recently added or re-added, after a few years of mostly - and trouble free - running of only How about checking the error codes of the failed tasks at the projects concerned? Claggy |
55)
Message boards :
BOINC Manager :
BOINC Manager displays after upgrade
(Message 62553)
Posted 13 Jun 2015 by Claggy Post: With a password set, my boincmgr will only connect to "localhost.home". None of "localhost", "rodney" or "rodney.home" will do. Have you got remote_hosts.cfg setup with allowed DNS host names or IP addresses? Controlling BOINC remotely Claggy |
56)
Message boards :
GPUs :
BOINC crashes, blue screen GPU related on AMD FirePro W5000
(Message 62442)
Posted 3 Jun 2015 by Claggy Post: Hello, What OS? What does the Boinc startup from the Event log say? Check the Boinc Data directory, the stdoutdae.txt file is what you need to look at. Claggy |
57)
Message boards :
Android :
What's the better method for avoiding battery heat - slow or speedy boinc?
(Message 62365)
Posted 28 May 2015 by Claggy Post: What's the better method for avoiding battery heat Put the device on something metal like the top of a computer case, and you'll find the heat is drawn away. Claggy |
58)
Message boards :
BOINC Manager :
PC freeze!
(Message 62311)
Posted 25 May 2015 by Claggy Post: Boinc doesn't do any computation itself, the project applications do that, Best ask at the project concerned. Claggy |
59)
Message boards :
Questions and problems :
Windows 10 preview and BOINC 7.4.42 (x64)
(Message 62298)
Posted 24 May 2015 by Claggy Post: On project initialisation, the project generally only sends one task for each device, you'll get more once the project backoff ends, as you're discovered. http://setiweb.ssl.berkeley.edu/beta/show_host_detail.php?hostid=75216 24 May 2015, 8:57:27 UTC. Picked up single SETI@home v7 v7.00 task and single SETI@home v7 v7.06 (opencl_ati5_cat132) task. 24 May 2015, 8:57:40. UTC Picked up 40 SETI@home v7 v7.06 (opencl_ati_cat132) tasks, But no CPU tasks, this would have put Boinc into CPU backoff. 24 May 2015, 9:03:29 UTC. Picked up 31 SETI@home v7 v7.00 tasks and 9 SETI@home v7 v7.06 (opencl_ati5_cat132) tasks. 24 May 2015, 9:03:41 UTC. Picked up 18 SETI@home v7 v7.00 tasks. Claggy |
60)
Message boards :
Questions and problems :
Raspberry Pi 2
(Message 62155)
Posted 13 May 2015 by Claggy Post: I also have some questions. Yes, you can use Boinccmd to manage Boinc instead of using the GUI Boinc Manager. I am thinking at connecting to a usb charging port (max 2V) and leave it running 24/7. It depends which OS you're running, the usual OS is Raspbian, this is a Debian port, So any projects that have Arm or Armv7 apps on Linux. Claggy |
61)
Message boards :
Questions and problems :
CUTS DESKTOP POWER COMPLETELY
(Message 62035)
Posted 3 May 2015 by Claggy Post: I have now uninstalled the BOINC program so am unable to supply you with the log but I can say that the program ran well without glitches, of course up until the times the desktop completely shutdown. When I rebooted the PC each time after it shutdown the BOINC program continued to run in the background right up to the time the PC powered off again The Boinc Data directory is never deleted on uninstallation, you can find your logs in C:\ProgramData\BOINC (assuming you're used the default installation location), the logs to look at are stdoutdae.txt and stdoutdae.old Is the PC Blue Screening and Shutting down, Powering down on it's own, Or is Windows Power Saving just putting it to Sleep? (Windows default action) Claggy |
62)
Message boards :
Questions and problems :
CUTS DESKTOP POWER COMPLETELY
(Message 62030)
Posted 3 May 2015 by Claggy Post: Please post the Boinc startup from the Event Log, the first 30 to 40 lines will do. Claggy |
63)
Message boards :
Questions and problems :
CUTS DESKTOP POWER COMPLETELY
(Message 62029)
Posted 3 May 2015 by Claggy Post: Is your Power Supply meaty enough to run the host's devices and peripherals flat out? Claggy |
64)
Message boards :
Questions and problems :
data usage
(Message 62023)
Posted 2 May 2015 by Claggy Post: BOINC does keep records of how much data it has transferred, if you want to check your suspicions, but it doesn't supply any easy tools for inspecting and analysing the history file. That would be a nice addition to the Statistics Tab. Claggy |
65)
Message boards :
Questions and problems :
New Member?
(Message 62020)
Posted 2 May 2015 by Claggy Post: I had to register to get an account today. I have had SETI on my computer for years and I still have the same email address, same name, same snail mail address. This is the Boinc Message Boards, Not Setiathome. Claggy |
66)
Message boards :
Questions and problems :
New box, R9-280x, Catalyst 14.12 Not using GPU
(Message 61997)
Posted 30 Apr 2015 by Claggy Post: 4/30/2015 12:59:03 PM | | OpenCL: AMD/ATI GPU 0: Hawaii (driver version 1642.5 (VM), device version OpenCL 2.0 AMD-APP (1642.5), 4096MB, 4096MB available, 3555 GFLOPS peak) Your GPU is reporting OpenCL Support, But no CAL support. 4/30/2015 1:04:00 PM | Milkyway@Home | Sending scheduler request: To fetch work. Milkyway at home looks as if they're mixed their planclass specs up a bit, they are reporting your GPU is missing OpenCL support, when it is only missing CAL support, Try a different project, Like Einstein, or Seti. Claggy |
67)
Message boards :
Questions and problems :
New box, R9-280x, Catalyst 14.12 Not using GPU
(Message 61994)
Posted 30 Apr 2015 by Claggy Post: Please post your Boinc startup from the Event Log, the first 30 lines or so will do. Claggy |
68)
Message boards :
Questions and problems :
BOINC not using more than 67% processor on Debian
(Message 61901)
Posted 25 Apr 2015 by Claggy Post: I have a Raspberry Pi 2 running Rasbian (Debian). BOINC (Einstein@home) is running on all four cores, however it won't use more than 67% of the processor. Is there a setting somewhere where I can tell it to use more of the processor? Made the image visable. Claggy |
69)
Message boards :
GPUs :
GPU Missing
(Message 61867)
Posted 25 Apr 2015 by Claggy Post: You'll have to use an alternative to remote desktop: http://en.wikipedia.org/wiki/Comparison_of_remote_desktop_software I can't remember which one's are often used by Boinc users. Claggy |
70)
Message boards :
Questions and problems :
Puzzling allocaton of work
(Message 61866)
Posted 25 Apr 2015 by Claggy Post: What are your Cache settings? Claggy |
71)
Message boards :
GPUs :
GPU Missing
(Message 61861)
Posted 25 Apr 2015 by Claggy Post: Copy and Paste, Not truncated screen shots please, that's what the Copy buttons at the bottom are for. Oh, and Don't use Remote Desktop, that uses different drivers that don't have Cuda and OpenCL support, use a different method of accessing the host. Claggy |
72)
Message boards :
GPUs :
GPU Missing
(Message 61857)
Posted 25 Apr 2015 by Claggy Post: From the Event Log, Shortcut to open it is 'Ctrl+Shift+E' Claggy |
73)
Message boards :
GPUs :
GPU Missing
(Message 61848)
Posted 25 Apr 2015 by Claggy Post: Show us the startup logs, and the logs of when it happens. Claggy |
74)
Message boards :
Questions and problems :
Raspberry Pi 2
(Message 61833)
Posted 24 Apr 2015 by Claggy Post: I am not sure if Claggy is happy to share the version he did or not. They might release it as a stock app on Seti. I've given him links to the two apps, he just needs an app_info.xml now, I don't have time right now. Claggy |
75)
Message boards :
Questions and problems :
How to use GPU?
(Message 61760)
Posted 21 Apr 2015 by Claggy Post: Seems to be a limitation of the boinc_client program. Checked command line options, and there is one which seems to allow multiple clients, however, when I tried to run 2 instances of boinc_client, it just complained that one was already running, even with that option. Did you make another directory location, and install Boinc in it, then run that instance with the allow allow multiple client? each instance will need to a have a different host id, etc, so you can't run a client multiple times from the same directory. Claggy |
76)
Message boards :
Android :
no project on Android 4.4.2
(Message 61711)
Posted 19 Apr 2015 by Claggy Post: For your Intel Atom host to get work from projects, those projects have to have an 'Android running on x86' application, Collatz has one, Seti does not. Collatz Applications Setiathome Applications Seti Beta has an x86 on Android application, But's a rebadged Linux application, and the api/libs aren't entirely compatible, and no one has had time to rebuild it yet: Seti Beta applications Claggy |
77)
Message boards :
GPUs :
limit / control gpu usage via boinc config files / non_gpu coprocessor
(Message 61555)
Posted 12 Apr 2015 by Claggy Post: i tried to get it to work with a cc_config.xml file looking like this: The specify a coprocessor cc_config.xml is only for specifying a Non-Nvidia/ATI/Intel_GPU coprocessor, Boinc can already detect those co-processors, so it is not needed, If you have something like a Parallella, or a Raspberyy Pi, then you could use it to specify the Epiphany co-processor on the Parallella, or the Raspberry Pi's VideoCore IV dual-core GPU, then Boinc could (if there were apps available, and you'd supplied them in app_info's) get work to utilise those co-processors. About limiting GPU usage, you'd have to ask the project application writers how to configure their applications to make them less efficient, or use TThrottle. Edit: I see the wiki wording says 'This mechanism has two purposes: to provide fine-grained control of the coprocessors recognized by BOINC (NVIDIA, AMD, and Intel GPUs), and to let you use coprocessors not recognized by BOINC.', I don't see how it can allow fine-grained control of the coprocessors beyond changing the number of tasks run, or the number of devices. Claggy |
78)
Message boards :
Questions and problems :
No more work?
(Message 61528)
Posted 10 Apr 2015 by Claggy Post: Sorry. Read the News, and Technical News posts, no need to post yourself asking what's happening. Claggy |
79)
Message boards :
Questions and problems :
What to do when I find my BOINC client has just shut down?
(Message 61526)
Posted 10 Apr 2015 by Claggy Post: I had another problem with BOINC a month or so ago, in which a particular work unit, listed as being at 100%, wouldn't upload, and in so doing blocked everything else from operating; I solved that problem by suspending that unit - everything else quickly recovered and began running again. Related? I dunno. I can't assess what the state of the program is, I have no idea where the logs are located, I'm completely at sea here. Any suggestions? Does Boinc still have that workunit suspended? If a there are any suspended Wu's for a project Boinc won't ask for work from that project, hence Boinc will run out of work for that project, If you can't get the result to upload, then abort it, it's probably past deadline now anyway. Claggy |
80)
Message boards :
Questions and problems :
No more work?
(Message 61524)
Posted 10 Apr 2015 by Claggy Post: Hi, This is the BOINC Message boards, It is not a project, It does not issue work, your computers can't attach to it. Claggy |
81)
Message boards :
BOINC client :
Problem on starting client 7.5.0 x64
(Message 61475)
Posted 8 Apr 2015 by Claggy Post: Likewise, I've downloaded and installed Boinc 7.5.0 x64 on my i5-3210M laptop, Boinc Manager started and is running O.K here too. Claggy |
82)
Message boards :
BOINC client :
Problem on starting client 7.5.0 x64
(Message 61472)
Posted 8 Apr 2015 by Claggy Post: Boinc tray is the mouse and keyboard idle detection program, it doesn't need to show itself, Claggy |
83)
Message boards :
Questions and problems :
What to do when I find my BOINC client has just shut down?
(Message 61406)
Posted 5 Apr 2015 by Claggy Post: Now and then I notice that some machine hasn't reported anything back for days, go check it out, and find either that it has rebooted (power loss, Windows Update, etc.) or that the BOINC Manager icon on the tray has simply disappeared even though the PC is just fine. Over the last few days I have noticed that every night on a few of the machines the BOINC Manager would simply be gone. Yes, they are all running the latest of everything. Boinc Manager is the GUI, you don't need it running, you can happily shut it down without the Boinc client being shutdown. The question is, is that client still running, ie Boinc.exe, Check task manager. You can check the stdoutdae.txt and stdoutdae.old for what's happening, they're in your Boinc Data directory. Claggy |
84)
Message boards :
GPUs :
[Linux] Intel GPU Ivy Bridge OpenCL
(Message 61379)
Posted 3 Apr 2015 by Claggy Post: OpenCL ERROR: clGetDeviceIDs(-1) That wasn't with Boinc, but with Luxmark: >:( No luck with Luxmark and intel_beignet, some basics like clGetDeviceIDs(-1) or clBuildProgramm(-3) fail : The Einstein app also fails to get the OpenCL device id: GPU not found: type=intel_gpu, opencl_device_index=0, device_num=0 Claggy |
85)
Message boards :
GPUs :
[Linux] Intel GPU Ivy Bridge OpenCL
(Message 61376)
Posted 3 Apr 2015 by Claggy Post: @Claggy: Do you have a link where you found that? From a developer thread (that's only viewable to devs and testers): Beignet 0.8, 0.9.3, 1.01, 1.02 Claggy |
86)
Message boards :
GPUs :
[Linux] Intel GPU Ivy Bridge OpenCL
(Message 61373)
Posted 3 Apr 2015 by Claggy Post: I think Collatz just deployed their standard Linux OpenCL app for Linux for when Intel OpenCL GPU support becomes available. Urs at Lunatics had another go at getting beignet running: What a lucky morning ! Finally got BOINC to see my Intel GPU on openSUSE 13.1 . But it wasn't all good news: >:( No luck with Luxmark and intel_beignet, some basics like clGetDeviceIDs(-1) or clBuildProgramm(-3) fail : Claggy |
87)
Message boards :
GPUs :
How to use 2 GPUs ?
(Message 61244)
Posted 27 Mar 2015 by Claggy Post: Look at the User manual? http://boinc.berkeley.edu/wiki/User_manual Especially the the client configuration <use_all_gpus>0|1</use_all_gpus> Claggy |
88)
Message boards :
Questions and problems :
Bionic 7.4.36 only using 1 CPU core (or less)
(Message 61193)
Posted 24 Mar 2015 by Claggy Post: FAHV_x4FAE_B_PRAS_0969863_0566_0 exited with zero status but no 'finished' file 3/23/2015 8:15:30 PM | World Community Grid | If this happens repeatedly you may need to reset the project. The 'If this happens repeatedly you may need to reset the project.' tends to nearly always be a Red Herring, it normally never fixes it, the causes of it are loss of connection between the app and Boinc. Try excluding the Anti Virus from scanning the Boinc Data directory, and try rerunning the Boinc 7.4.36 installer, and choose 'Repair', the failure to delete applications hints at the permissions being wrong, or the Anti-Virus is Blocking writing to disk, and the app not being able to communicate with Boinc: 3/23/2015 8:22:03 PM | rosetta@home | Resetting project Notice also that the program is called Boinc, Not Bionic, It stands for 'Berkeley Open Infrastructure for Network Computing' Claggy |
89)
Message boards :
Questions and problems :
Bionic 7.4.36 only using 1 CPU core (or less)
(Message 61137)
Posted 23 Mar 2015 by Claggy Post: So it's definitely a Bionic issue. Or a project application issue, or a user setting issue, Until you supply the information asked, nowone can help: When requesting help on these forums. Claggy |
90)
Message boards :
Questions and problems :
BOINC screensaver won't start
(Message 61015)
Posted 17 Mar 2015 by Claggy Post: Recently updated to the newest version of BOINC client. And what version is that?, saying the latest version means different things to different people. Claggy |
91)
Message boards :
Questions and problems :
Seismograph cannot be found
(Message 60969)
Posted 15 Mar 2015 by Claggy Post: Did you try unplugging the sensor and then plugging it back in? I have to do that with mine every now and then. He said he did: So I unplugged the sensor, waited a few seconds for windows to acknowledge the disconnect, then reconnected, windows acknowledged the reconnect, and the sensor is back! along with the strip chart updating like it should. Claggy |
92)
Message boards :
GPUs :
GPUs Working?
(Message 60862)
Posted 11 Mar 2015 by Claggy Post: You're not using remote desktop by any chance? Claggy |
93)
Message boards :
GPUs :
GPUs Working?
(Message 60841)
Posted 11 Mar 2015 by Claggy Post: Please post your Boinc startup from the Event Log. Claggy |
94)
Message boards :
Android :
What to do in Android 2.3 ?
(Message 60763)
Posted 8 Mar 2015 by Claggy Post: Boinc 7.4.37 was built without PIE support: Not sure, probably not, that's why i gave you the link to 7.4.37, that doesn't have PIE support, so will work on devices that don't support PIE. Claggy |
95)
Message boards :
Android :
What to do in Android 2.3 ?
(Message 60757)
Posted 8 Mar 2015 by Claggy Post: Boinc 7.4.37 was built without PIE support: http://boinc.berkeley.edu/dl/boinc_7.4.37.apk Don't think 7.4.39 will work, as they increased the from minSdkVersion="9" to android:minSdkVersion="16" for that version, don't know why through. Claggy |
96)
Message boards :
BOINC Manager :
simple thing: better colouring for the statistics
(Message 60674)
Posted 4 Mar 2015 by Claggy Post: The last version available for Linux is 7.2.42. That's not true, Berkeley has Boinc 7.4.22 available for download: http://boinc.berkeley.edu/download_all.php Debian has 7.4.23 available for wheezy-backports, Jessie, sid and experimental: https://packages.debian.org/source/wheezy-backports/boinc Ubuntu has 7.4.8 for The Utopic Unicorn, and 7.4.23 for The Vivid Vervet: https://launchpad.net/ubuntu/+source/boinc And if you add locutusofborg's ppa to Ubuntu trusty, utopic or vivid then you can have Boinc 7.4.41: https://launchpad.net/~costamagnagianfranco/+archive/ubuntu/locutusofborg-ppa Updating the regular distro Boinc package is up to that Distro(depends what their policy is)/their package maintainers. Claggy |
97)
Message boards :
GPUs :
Issue running WUs from Seti@Home on AMD HD6850 GPU
(Message 60622)
Posted 2 Mar 2015 by Claggy Post: Thanks a lot for your good support. Brilliant. Claggy |
98)
Message boards :
GPUs :
Issue running WUs from Seti@Home on AMD HD6850 GPU
(Message 60588)
Posted 1 Mar 2015 by Claggy Post: I've an issue running GPU-WUs from Seti@home on my AMD HD6850 GPU. After a few seconds of work the screen freezes for about 3 seconds, then it blanks for about one second and finally the driver detects that the GPU is not reacting and resets it. After that the processing the WU still consumes GPU time but does not show any progress. The remaining time remains constant. GPU-Z shows a GPU workload of 0%. Stoppping and restarting GPU processing in BOINC repeats the same behavior from the beginning. Catatyst 13.1 has a compiler Bug and doesn't work with the Setiathome_v7 app, doing the compilations on that driver causes the result you observed: ATI Driver Version Cheat Sheet Cat 13.1 has APP runtime 1084.4 compiler Bug. Do not use for SETI@home v7. Update your driver. That is why Seti has plan_classes for post Cat 13.2 drivers, and pre Cat 13.1 drivers, So Setiathome_v7 work isn't sent to hosts running Cat 13.1: Setiathome Applications Windows/x86 7.03 (opencl_ati5_cat132) 30 May 2013, 0:18:19 UTC 4,018 GigaFLOPS Windows/x86 7.03 (opencl_ati5_sah) 30 May 2013, 0:18:19 UTC 393 GigaFLOPS Claggy |
99)
Message boards :
GPUs :
Specify times for GPU calculation
(Message 60483)
Posted 23 Feb 2015 by Claggy Post: Use BoincCmd and set up a schedule to Start and Stop GPU usage: http://boinc.berkeley.edu/wiki/Boinccmd_tool --set_run_mode {always | auto | never} [ duration ] Claggy |
100)
Message boards :
Questions and problems :
BOINC WU on LinuxMint with NVIDIA GPU
(Message 60479)
Posted 22 Feb 2015 by Claggy Post: I rebooted, but still no GPU recognition at einstein.phys.uwm.edu Einstein doesn't do the GPU recognition, Boinc on your host does that, Try doing a sudo /etc/init.d/boinc-client restart or a sudo service boinc-client restart if that's what's used on your distro. Then post the Boinc startup from the Event Log. Claggy |
101)
Message boards :
GPUs :
Suspend GPU option stuck
(Message 60466)
Posted 22 Feb 2015 by Claggy Post: How did you suspend the GPU? Where? Are you sure you have GPU tasks? I have restarted BOINC, reinstalled BOINC, restarted the computer, all to no avail. Since you're done a few things, can you post the Boinc startup from the Event log please, the first 30 lines will do. Claggy |
102)
Message boards :
Questions and problems :
Raspberry Pi 2
(Message 60454)
Posted 21 Feb 2015 by Claggy Post: Stock Clock at the Moment, only got one heatsink on it at the moment, awaiting a delivery of others. Claggy |
103)
Message boards :
Questions and problems :
Fan revs up and down
(Message 60331)
Posted 15 Feb 2015 by Claggy Post: Rather than using the CPU time set at 25% or 50%, set that 100%, and limit the number of cores allowed to be utilised instead, Claggy |
104)
Message boards :
Questions and problems :
Just one calculation at the same time with AMD Athlon II P360 Dual Core 2290 MHz-CPU?
(Message 60323)
Posted 15 Feb 2015 by Claggy Post: Make sure, in computing preferences, CPU Useage is set to use at most 100% of the CPUs/On multiprocessors, use at most 100% of the processors. That is either set at any project website, or locally in Boinc Manager, Note: setting it in Boinc Manager overrides the Web Computing preferences, if you're trying to set at a project website, and it doesn't work, then you may need to 'Clear' the Computing preferences in Boinc Manager. Claggy |
105)
Message boards :
BOINC Manager :
[SOLVED] wxWidgets Debug Alert - assert "c < 0x80" failed [...]
(Message 60312)
Posted 14 Feb 2015 by Claggy Post: Rom reports it'll be fixed in the next release, it was because of how he originally built the wxWidgets 3.0.1 libraries. http://boinc.berkeley.edu/gitweb/?p=boinc_depends_win_vs2010.git;a=commit;h=52b5b9b7a99b57bafe012ddede0b6be304d1ca28 Update WxWidgets 3.0.1 (Disable asserts on release builds) Claggy |
106)
Message boards :
BOINC Manager :
[SOLVED] wxWidgets Debug Alert - assert "c < 0x80" failed [...]
(Message 60311)
Posted 14 Feb 2015 by Claggy Post: I've reported it to the boinc_alpha mailing list. Claggy |
107)
Message boards :
BOINC Manager :
[SOLVED] wxWidgets Debug Alert - assert "c < 0x80" failed [...]
(Message 60309)
Posted 14 Feb 2015 by Claggy Post: But now it's the second time, on a "background" computer user for CCTV cam. After a fresh install on this computer, BOINC doesn't works anymore. The one bit of information you didn't give is: Which Boinc version? Claggy |
108)
Message boards :
Questions and problems :
Only two tasks out of nine possible this morning
(Message 60305)
Posted 14 Feb 2015 by Claggy Post: The reason I aborted the stacked CPDN tasks was that they were running to the exclusion of SETI. I know the program is supposed to even things out over time. I've seen a number of posts from others indicating this doesn't work so well in practice though. Rather than aborting them, just suspend them all but one, let only one run at once, they have really long deadlines, Or use an app_config.xml to do that automatically: Application configuration <app_config> Drop the file in the CPDN project directory, do a read config file, and Boinc will only run one CPDN task at a time. Claggy |
109)
Message boards :
Questions and problems :
Only two tasks out of nine possible this morning
(Message 60302)
Posted 14 Feb 2015 by Claggy Post: Looking at your host at Seti: All tasks for computer 7334605 It has plenty of Cuda GPU tasks, but no CPU tasks left, It also hasn't contacted the project since 14 Feb 2015, 1:23:02 UTC, over an hour ago, http://setiathome.berkeley.edu/hosts_user.php?userid=1994368 Looking at your host at CPDN: http://climateapps2.oerc.ox.ac.uk/cpdnboinc/results.php?hostid=1354602 You have one recently completed task, one task in progress, one errored task, and six aborted tasks, and a 'Maximum daily WU quota per CPU' of '0/day', stop aborting tasks, that lowers your allowance and makes it less likely the project will send you tasks. and your host hasn't contacted the project in 19 hours: http://climateapps2.oerc.ox.ac.uk/cpdnboinc/hosts_user.php?userid=138584 So what cache settings are you running? (both of them) Claggy |
110)
Message boards :
Questions and problems :
Only two tasks out of nine possible this morning
(Message 60296)
Posted 14 Feb 2015 by Claggy Post: Sorry about that. Boinc startup please, the first 30 lines or so will do. Claggy |
111)
Message boards :
BOINC client :
Recommend BOINC 7.4 for Linux users?
(Message 60276)
Posted 13 Feb 2015 by Claggy Post: I've been building Boinc 7.4.x on my Ubuntu 14.04 host frequently and reporting any Bugs I find, the Bugs I've been finding are mostly Boinc Manager/WxWidgets 3.0.x Bugs, the devs have been fixing them as I report them, Boinc 7.4.41 is already quite good, although there is one Bug fix, and one feature improvement/Bug fix that hasn't been applied to the 7.4 head yet, only trunk: http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=4094edd1805b4dd8fcba1dec5d1818698d54d168 MGR: Work around an apparent bug in wxWidgets 3.0 on Linux which drew blank lines at the top and failed to draw the bottom items. This could happen if the list was scrolled near the bottom and the user selected "Show active tasks." http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=2ce6da11a5a9f47c4174a6ab0be4a821b77ec5d3 MGR: work around a Linux bug in wxWidgets which prevents bringing the main window forward on top of Event Log (or any modeless dialog.) http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=2ce6da11a5a9f47c4174a6ab0be4a821b77ec5d3 MGR: fix a bug in my last commit (e6607a6) in Linux when a modal dialog is open which prevented bringing bringing the modal dialog with the main window forward on top of Event Log. (Linux allows the Event Log to be brought forward and made active even if we have a modal dialog displayed (associated with our main frame.) Claggy |
112)
Message boards :
Questions and problems :
BOINC remains suspended even when computer is not in use
(Message 60271)
Posted 13 Feb 2015 by Claggy Post: What your problem is exactly, write it out in as much detail as you can. Made the links active. Claggy |
113)
Message boards :
Questions and problems :
Raspberry Pi 2
(Message 60257)
Posted 12 Feb 2015 by Claggy Post: Hi Claggy, I actually put Raspbian on it, Compiled Boinc 7.2.47 for it, Attached to Einstein, Albert, Seti and Seti Beta, have run work from Einstein, Albert and Seti Beta on it, Seti Beta being with an app compiled by myself, The repository Boinc 7.0.27 should work too, But it's open to question whether that detects Neon support, So you may not get Neon apps. Claggy |
114)
Message boards :
Projects :
Any Other NCI Projects?
(Message 60242)
Posted 10 Feb 2015 by Claggy Post: There is Radioactive at home, which works on a similar vein to QCN so you'll need a sensor. This was mentioned on the second message in the thread you linked to. and there being only being four active/semi active sensors in the UK, two of them being mine: http://radioactiveathome.org/map/ To get a sensor you'll need to monitor their forums repeatily, and apply as soon as they announce a batch. Claggy |
115)
Message boards :
Questions and problems :
CPU is 2% and not 100%
(Message 60241)
Posted 10 Feb 2015 by Claggy Post: how to check that with CLI. Well you can use another computer to log onto your projects websites (via a browser) and see if it is allocated any work from each project. Claggy |
116)
Message boards :
Questions and problems :
CPU is 2% and not 100%
(Message 60171)
Posted 8 Feb 2015 by Claggy Post: the Problem if i watch Munin the CPU is 2% and not 100% as it should be. Does it have any work? Is computation suspended for some reason? Are the projects set to NNT? Claggy |
117)
Message boards :
Android :
BOINC client not working on Android 5.0
(Message 60133)
Posted 5 Feb 2015 by Claggy Post: The 7.4.41.apk was built on 22 January, but I'm not familiar with Android distribution channels. It should be in the Google Play app store, and other apps stores. It shows up here as: What's New But I'm attached to the 'BOINC Android Testing' Google Group, so I get the most recent build, regular users get whatever Rom has released to them. Looks as if they get 7.4.39, But only if they are running an Android lower than 5.0: What's New The other alternative is to just monitor the download directory: http://boinc.berkeley.edu/dl/ But you'll need to know what the changes are to a particular version, so you get the right version. Claggy |
118)
Message boards :
Questions and problems :
Working with BOINC's Screen saver
(Message 60123)
Posted 5 Feb 2015 by Claggy Post: Just a general question. How does one turn off the screen saver or just display a blank screen? (Seems that having BOINC's screen saver showing what it is would be wasted cycles that could be used for more meaningful work) You go to the screensaver settings and change it to Blank or None. Claggy |
119)
Message boards :
Android :
BOINC client not working on Android 5.0
(Message 60116)
Posted 4 Feb 2015 by Claggy Post: Bump, any update? Boinc 7.4.41 was tagged almost two weeks ago. Claggy |
120)
Message boards :
Questions and problems :
Raspberry Pi 2
(Message 60110)
Posted 4 Feb 2015 by Claggy Post: Mine arrived today, the micro SDCard will arrive tomorrow. I'll be flashing Snappy Ubuntu Core alpha-02 onto it, Building Boinc, then a Seti app, all while crunching on Einstein and Albert. and Raspbian later. Claggy |
121)
Message boards :
Questions and problems :
Amazon AWS setup
(Message 60072)
Posted 3 Feb 2015 by Claggy Post: Im trying to run: The password is whatever is written in the gui_rpc_auth.cfg file: Controlling BOINC remotely You might also need to setup the remote_hosts.cfg too. Claggy |
122)
Message boards :
Questions and problems :
7.4.36 - Q and A - Waiting for memory !!!
(Message 60016)
Posted 27 Jan 2015 by Claggy Post: Inside Task - under the status. Waiting for memory? And What schall you do? It ask after more RAM. What project? What project app? What does the Event Log say? What does the task's result page say? (assuming it has managed to finish) Claggy |
123)
Message boards :
Questions and problems :
"No new tasks" doesn't work for WUProp@home
(Message 59982)
Posted 27 Jan 2015 by Claggy Post: Excuse me, Claggy, but what does that mean? The "changeset"...? A Changeset is a Code change. Is it BOINC programmed to request NCI jobs even if I specify not to do it? No, It's the other way around, Boinc isn't requesting NCI work, But the server's scheduler ignores that Boinc isn't asking for work, and sends NCI work anyway. NCI means non compute intensive, there is no CPU load, or if any, minimal CPU load, why would you want to suspend a NCI project like WUProp@home or Radioactiveathome, If you have a sensor connected shouldn't you keep sending your sensor data? Claggy |
124)
Message boards :
Questions and problems :
"No new tasks" doesn't work for WUProp@home
(Message 59979)
Posted 27 Jan 2015 by Claggy Post: Mon 26 Jan 2015 07:12:33 PM EST | WUProp@Home | Not requesting tasks: non CPU intensive Now I know what to look for, here's a changeset that probably applies: scheduler: send NCI jobs even if no work request scheduler: send NCI jobs even if no work request Claggy |
125)
Message boards :
Questions and problems :
"No new tasks" doesn't work for WUProp@home
(Message 59974)
Posted 26 Jan 2015 by Claggy Post: Hi everyone, How did you 'cancel' the task in progress?, there is no 'cancel' button, you may eithier 'Abort' a workunit, or 'Reset' the project, What does the Event Log say? Does Boinc ask for work? If Boinc doesn't ask for work, the Scheduler shouldn't send it. the exception is projects with older Boinc server software, where 'resend lost tasks' still happens even with NNT set, If you reset the project that task is still allocated to your host, The project may or not resend it depending whether 'resend lost tasks' is enabled, and how new or old it's scheduler is. Claggy |
126)
Message boards :
BOINC client :
My Wish List
(Message 59960)
Posted 25 Jan 2015 by Claggy Post: I have overlooked this feature. Support is already there: Thu Jan 22 22:08:29 GMT 2015||(battery charge level 0.0% < threshold 90.0% For OpenCL GPU support to be even possible, Device vendors need to start supplying OpenCL support in the first place, While my 2012 HTC One S has CPU OpenCL support, neither my 2012 Nexus 7, nor my Samsung S6 mini have any OpenCL support: 2012 HTC One S: Name: QUALCOMM Snapdragon(TM) 2012 Nexus 7: OpenCL platform not found. 2014 Samsung S6 mini: OpenCL platform not found. Claggy |
127)
Message boards :
BOINC client :
My Wish List
(Message 59957)
Posted 25 Jan 2015 by Claggy Post: Support for Android x86 architecture: Support for x86 Android x86 architecture is already available: http://boinc.berkeley.edu/download_all.php Android Claggy |
128)
Message boards :
BOINC client :
BM Not Adhering to app_config.xml Settings for CPU and GPU Usage
(Message 59928)
Posted 22 Jan 2015 by Claggy Post: I recoded the app_config file per the standard but it appears the client continues to use the default cpu and gpu usage values. I am attempting to allow two solo_collatz WUs to run concurrently and reserve one (1) full cpu in support of the gpu WUs. I think you need to double check you're editing the right app_config.xml, and in the right directory, it should be: C:\ProgramData\BOINC\projects\boinc.thesonntags.com_collatz I took your app_config.xml and made one in my collatz project directory, did a read config, re-enabled Use CPU and ATI/AMD & NV GPUs, made my host only use 4 cores, and grabbed some work from collatz, I'm running two Solo Collatz Conjenture 6.04 (1 CPUs + 0.5 AMD/ATI GPUs) tasks, and one Large Collatz Conjenture (1 CPUs + 1 Nvidia GPU) task, and one Mini Collatz Conjenture 6.04 CPU task, making a total of 4 tasks/cores utilised. increasing the allowed cores from 4 to 6 only started one more Mini Collatz Conjenture 6.04 CPU task, showing that as well as 'Solo Collatz' being limited to two tasks running at once, that Mini Collatz is too. Claggy |
129)
Message boards :
Questions and problems :
No tasks being drawn from newly added projects
(Message 59924)
Posted 22 Jan 2015 by Claggy Post: I know I saw this somewhere... Because we Lunatics recommend that users free a CPU core when running OpenCL GPU apps, other wise there is an app slowdown: Best usage tips: There are various ways of doing this, setting 'On multiprocessors, use at most' low enough so one less CPU task is run, to changing to the following in the app_info.xml to achieve the same thing: <avg_ncpus>1.0</avg_ncpus> <max_ncpus>1.0</max_ncpus> to changing to the following in an app_config.xml to: <cpu_usage>1.0</cpu_usage> They'll all achieve the same thing, althrough only the second two will show the desired: Running(1 CPUs + 1 AMD/ATI GPU) Claggy |
130)
Message boards :
BOINC client :
BM Not Adhering to app_config.xml Settings for CPU and GPU Usage
(Message 59920)
Posted 22 Jan 2015 by Claggy Post: Boinc Manager is the GUI, It doesn't and won't follow what in the app_config.xml, the Boinc client will through: It does not appear that BM is adhering to the cpu_usage and gpu_usage settings stated in the app_config.xml file. I have also created a scenario (136) in the emulator for Collatz WUs as opposed to MilkyWay WUs. Your app_config.xml looks to be non-standard, the format should follow this (Don't put extra lines in with standards that don't exist (<user_friendly_name>), don't change the order): http://boinc.berkeley.edu/wiki/Client_configuration#Application_configuration <app_config> Claggy |
131)
Message boards :
Questions and problems :
Drooling for WxWidgets fix. But lacking git skills.
(Message 59862)
Posted 20 Jan 2015 by Claggy Post: Hi there!! The WxWidget changes are post Boinc 7.4.37, so that version doesn't have it, But the nightly 7.5.0 build will. (Edit I see Rom has tagged 7.4.38 now) Claggy |
132)
Message boards :
Questions and problems :
Drooling for WxWidgets fix. But lacking git skills.
(Message 59844)
Posted 20 Jan 2015 by Claggy Post: -------------- I see that too, But Boinc is using Git now, so don't know why it is trying to generate a svn_version, anyway I have no trouble after that. Probably need to ask the devs. Claggy |
133)
Message boards :
Questions and problems :
Drooling for WxWidgets fix. But lacking git skills.
(Message 59843)
Posted 20 Jan 2015 by Claggy Post: Try the libs I mentioned in this post (There's probably extra than needed for compiling the client and manager): Compiling Applications for Linux sudo apt-get install git make m4 libtool autoconf pkg-config automake g++ gcc You'll also want libwxgtk3.0-dev and libwxgtk-webview3.0-dev, although the Widgets 3.0 for Ubuntu 14.04 doesn't have webview support, so I used one of LocutusOfBorg ppa's to get one. Claggy |
134)
Message boards :
Questions and problems :
Drooling for WxWidgets fix. But lacking git skills.
(Message 59820)
Posted 19 Jan 2015 by Claggy Post: Hi there. Just checkout 'git checkout client_release/7.4/' Then ./_autosetup, configure, make etc, you'll end up with a Boinc 7.4.36, But with the latest changesets too. Claggy |
135)
Message boards :
Questions and problems :
Boinc destroying wifi
(Message 59738)
Posted 17 Jan 2015 by Claggy Post: So I recently downloaded Boinc and since then I had massive problems with my WiFi, to the point where it is unusable. When I check my connections it shows that I have an average of 1000 active connections, I tried setting network usage limits and uninstalling Boinc, but nothing has worked so far. The only way to get my WiFi back so far has been to shutdown my PC. Please help :( You're not supplied any real information: When requesting help on these forums. What OS? What Boinc version? What Router? What Wifi device? What Wifi version are you using? What frequency band are you using? What channels are you using? Are there neighbouring access points using the same channel? are you using 40MHz Bands or 20MHz Bands? Are your neighbours using 40MHz or 20MHz Bands? Have you tried moving your Router to a different channel? on the 2.4GHz Frequency Band there are only three non-overlapping channels. http://en.wikipedia.org/wiki/List_of_WLAN_channels Claggy |
136)
Message boards :
Questions and problems :
"Use GPU when the computer is used" not working anymore
(Message 59704)
Posted 17 Jan 2015 by Claggy Post: Of course it used to work for me too, but then it started in previous stable version then I upgraded to latest but still it doesn't work! Try a different project, do their apps suspend correctly, Jorg reported problem with Colletz OpenCL CPU apps not suspending correctly in Dec 14, The Windows Seti_v7 AMD/ATI GPU apps have a reported (by me) api problem of 18 months where it doesn't suspend during benchmarks, and doesn't suspend during processor usage exceedance, Re: Putative fix for suspending issue my point is that might not be a Boinc problem, more a problem with the api the app was built with. Claggy |
137)
Message boards :
BOINC Manager :
Suggestions For New Or Updated Features
(Message 59683)
Posted 16 Jan 2015 by Claggy Post: I know that 7.4.37 is now "available"...but the "official" release is still 7.4.36 (x86).....that's the one we are currently "advised" to upgrade to. Boinc 7.4.37 was an Android release, doesn't mean you can't compile/build Boinc from that tag for Windows/Linux/OS X (That I know of). Claggy |
138)
Message boards :
Projects :
News on Project Outages
(Message 59675)
Posted 15 Jan 2015 by Claggy Post: Looks like Albert@Home is down again. Down? It's been down for the last week. They're onto it now: http://albertathome.org/content/project-downtime Hi guys, Claggy |
139)
Message boards :
BOINC Manager :
Suggestions For New Or Updated Features
(Message 59665)
Posted 14 Jan 2015 by Claggy Post: It's a pain to have to stop any WU's, close down BM, find the right XML file, edit it, save it, then restart BM. We have app_config.xml now, edit it, do a read config file, config has changed, no Boinc restart required. Application configuration What you mean is Restart Boinc (in it's entirety), Boinc Manager is just the GUI, you don't actually have to run it, you can restart Boinc Manager as many times as you like, But if haven't restarted the Boinc client, the Boinc startup hasn't re-occured, app_info.xml haven't been reread etc. Claggy |
140)
Message boards :
Questions and problems :
Switch between applications every X minutes problem
(Message 59587)
Posted 13 Jan 2015 by Claggy Post: I do not want to do exclusively SETI work, but I will be forced back to that condition soon. By any and every measure over an extended timeframe, with work units from both projects on my machine now, BOINC is failing to allow me to donate my computer time as I wish. If I am going to be doing SETI work exclusively, what do I need the BOINC project manager for? Please fix this. As you're repeatily been told on the Seti forum, your cache setting is causing this, you're maxed out your cache setting, got your 200 tasks, Now Boinc needs to fill it's cache, so it gets Asteroids work, lots of it, now the Seti deadlines are all further away, and the Asteroids deadlines are only a few days away, So Boinc has to do the Asteroids work 'Right Now' otherwise it won't meet the deadline, Soon it'll have to do the Seti work otherwise it won't meet deadline, You're been told that adjusting your cache settings to a more reasonable amount will get things running more to your liking, But you won't listen. The only real way of fixing this is for Seti to remove their limits so you actually get your 10 or 20 days of work, or projects not to have real short deadline, so it doesn't have to done 'Right Now' to meet deadline. Claggy |
141)
Message boards :
Questions and problems :
Switch between applications every X minutes problem
(Message 59552)
Posted 11 Jan 2015 by Claggy Post: The "Switch between applications every X minutes" is the interval Boinc when may switch applications, Not when it must switch applications. Claggy |
142)
Message boards :
GPUs :
AMD APU & Boinc issues
(Message 59277)
Posted 3 Jan 2015 by Claggy Post: Thanks Claggy, I'll look forward to see a newer version of Boinc that fix's this issue. It's not Boinc that has the issue, but the setiathome_7.03_windows_intelx86__opencl_*_sah.exe apps, You can grab the 0.43a Lunatics Installer, and install the apps from that (a lot of the Stock apps are repackaged Lunatics apps, But of an older revision), It has a lot later revision of GPU apps with a couple of different api fixes, as well as faster CPU apps: Optimised Applications and Other Binaries - latest: Windows Installer v0.43 and v0.43a Claggy |
143)
Message boards :
BOINC client :
BOINC 7 development discussion thread.
(Message 59276)
Posted 3 Jan 2015 by Claggy Post: Small bug in 7.4.36: Jobs running at high priority are listed in the status column of the BOINC manager only as <running> but not as <running, high priority> like in older versions. I've verified that these jobs are still running with high priority after update 7.0.64 -> 7.4.36 (BoincTasks) It's not a Bug, DA removed mention of High priority, no-one managed to convince him of alternate wording to use, It's been like that since Boinc 7.4.24: http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=bca7c006deae20cc31be20fc37396bb4c0cfafc2 Manager: omit ", high priority" from task status He at least put mention of 'High prioity' when you set 'cpu_sched_debug', that's in 7.4.28 and later: http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=28f18bea30d819290ba647286fdec01763c53180 client: indicate "high-priority" tasks in event log (if cpu_sched_debug set) Claggy |
144)
Message boards :
GPUs :
AMD APU & Boinc issues
(Message 59266)
Posted 3 Jan 2015 by Claggy Post: I think I've worked out the main problem, the Stock Seti ATI/AMD MBv7 app has an already reported (by me) problem where it wasn't suspending during benchmarks, there are two different cases in your Log, One where Boinc is suspending usage because the computer is in use, marked in Dark Blue, I know the ATI/AMD MBv7 app will exit in that case, the other case is where the CPU usage exceeds 10%, in this case the app is supposed to stop compution, But remain in memory, But the app doesn't stop, the app revision where this was fixed was r1843, But the Stock app is still on r1831, I'll remind Raistmer, and see if he'll work towards getting a new Stock app released. Boinc upgraded, computer rebooted, the GPU is still crunching data when the computer is in use and I am unable to manually suspend Boinc. Claggy |
145)
Message boards :
Questions and problems :
How can I find out whether the graphic card is being used for computation?
(Message 59252)
Posted 2 Jan 2015 by Claggy Post: here for the ATI host: Can you post the actual Boinc startup from the Event log please, While I've found your host on Seti, and can see that all GPU tasks are erroring, what I can't see fully is what Boinc is actually detecting for the ATI/AMD drivers: Computer 7467315 Claggy |
146)
Message boards :
GPUs :
AMD APU & Boinc issues
(Message 59251)
Posted 2 Jan 2015 by Claggy Post: 2/01/2015 10:21:49 AM | | Resuming network activity Please upgrade to Boinc 7.4.36, Boinc 7.4.27 has some lingering GPU/miner problems post introduction of support for Bitcoin Miners, On my host running Boinc 7.4.36 I get the following when tasks suspend when I become active (GPU tasks should always exit from memory when getting Preempt, Bitcoin miners should continue): 02/01/2015 09:40:29 | | Suspending computation - computer is in use Claggy |
147)
Message boards :
Questions and problems :
How can I find out whether the graphic card is being used for computation?
(Message 59223)
Posted 1 Jan 2015 by Claggy Post: How can I tell, in both cases, the program to use the GPU instead of the CPU? Post your Boinc startup from the Event log, the first 30 lines from each host will do. Claggy |
148)
Message boards :
Questions and problems :
Resource sharing is not properly functional
(Message 59186)
Posted 31 Dec 2014 by Claggy Post: and tell the projects that I want 10 days of data for each of them The Cache settings are Global, setting a Cache setting of 10 days means 10 days overall, Not 10 days for Seti and 10 days for Asteroids. Claggy |
149)
Message boards :
Questions and problems :
How can I find out whether the graphic card is being used for computation?
(Message 59173)
Posted 31 Dec 2014 by Claggy Post: In Boinc Manager just look at the application name, if it says CAL, Cuda, OpenCL with Nvidia or ATI/AMD or Intel mentioned then it is a GPU task, the status will also say if it's running on a GPU, and whether it's on a Nvidia, ATI/AMD or Intel GPU. Or look at the 'Your computers' page at one of your project websites, hosts with GPUs will have a GPU named in the GPU column, Now look at the list of tasks for a host with a GPU, again there should be mention of CAL, Cuda Or OpenCL along with mention of Nvidia or ATI/AMD or Intel GPU. Claggy |
150)
Message boards :
GPUs :
AMD APU & Boinc issues
(Message 59090)
Posted 30 Dec 2014 by Claggy Post: p.s. I can't see any archived logs in boinc, only current logs. Look in C:\ProgramData\BOINC for stdoutdae.txt and stdoutdae.old for older logs. If you set the cpu_sched flag you'll see what happens when Boinc suspends and resumes: 30/12/2014 11:21:06 | | Suspending computation - computer is in use 30/12/2014 11:21:06 | SETI@home | [cpu_sched] Preempting 19oc14ac.12236.5966.438086664202.12.234_0 (left in memory) 30/12/2014 11:21:06 | SETI@home | [cpu_sched] Preempting ap_06oc14aa_B6_P1_00062_20141227_03858.wu_0 (left in memory) 30/12/2014 11:21:06 | SETI@home | [cpu_sched] Preempting ap_07oc14aa_B1_P1_00258_20141227_18385.wu_0 (removed from memory) 30/12/2014 11:21:06 | SETI@home | [cpu_sched] Preempting ap_07oc14aa_B1_P1_00137_20141227_18385.wu_0 (left in memory) 30/12/2014 11:21:06 | | Suspending network activity - computer is in use 30/12/2014 11:24:31 | | Resuming computation 30/12/2014 11:24:31 | SETI@home | [cpu_sched] Resuming 19oc14ac.12236.5966.438086664202.12.234_0 30/12/2014 11:24:31 | SETI@home | [cpu_sched] Restarting task ap_07oc14aa_B1_P1_00258_20141227_18385.wu_0 using astropulse_v7 version 705 (opencl_nvidia_100) in slot 0 30/12/2014 11:24:31 | SETI@home | [cpu_sched] Resuming ap_07oc14aa_B1_P1_00137_20141227_18385.wu_0 30/12/2014 11:24:31 | | Resuming network activity If apps don't actually do what they are supposed to then there is an app/api problem with that particular app. Claggy |
151)
Message boards :
Projects :
News on Project Outages
(Message 59060)
Posted 29 Dec 2014 by Claggy Post: Looks like albert@home is down. Went down almost a week ago, expect it to be down for another week: Albert@Home down Apparently our test project Albert@Home (i.e. the physical machine) went down last night around 1:30 AM UTC. So far I found no way to reach the machine at all, and I doubt that during the holidays there will be anyone @UWM who would reanimate it. I think it will stay that way until next year. Claggy |
152)
Message boards :
Questions and problems :
Task ____ exited with zero status but no 'finished' file
(Message 59043)
Posted 28 Dec 2014 by Claggy Post: Boinc 7.0.37/.38 introduced a new heartbeat mechanism that is supposed to fix this issue, The question after that is what api version are those projects compiling their apps with, and are they using the new or old heartbeat mechanism: http://boinc.berkeley.edu/gitweb/?p=boinc-v2.git;a=commit;h=4e8b4ddab581839929d4fa666d81161d590a0f8e - client and API: improve the way an app checks for the death of the client Old: heartbeat mechanism Problem: if the client is blocked for > 30 secs (e.g. because it takes a long time to write the state file, of because it's stopped in a debugger) then apps exit. This is bad is the app doesn't checkpoint and has been running for a long time. New: the client passes its PID to the app. The app periodically (10 sec) checks that the process still exists. Notes: - For backward compatibility (e.g. new API w/ old client, or vice versa) the client still sends heartbeats, and the API checks heartbeats if the client doesn't pass a PID. - The new mechanism works only if the client's PID isn't assigned to a new process within 10 secs of the client exiting. Windows 2000 reuses PIDs immediately, so check for Win2K and don't use this mechanism if so. TODO: For Unix multithread apps, critical sections aren't currently being enforced. Need to fix this by masking signals. svn path=/trunk/boinc/; revision=26147 Claggy |
153)
Message boards :
Questions and problems :
missing or bad parameter: email_addr
(Message 59023)
Posted 27 Dec 2014 by Claggy Post: I've seen a workaround using BoincCmd, Once I find it I'll post it, Or you can upgrade to Boinc 7.4.36 Claggy |
154)
Message boards :
Questions and problems :
BOINC 7.4.27 x64 fails to connect to world community grid project
(Message 58902)
Posted 23 Dec 2014 by Claggy Post: I asked for 7.4.36 to be pushed to recommended before Christmas, but apparently the developers are on vacation already. You can get the test version from post 58623 in the BOINC 7.2/7.3/7.4 Change Log and News thread though. I had an email from Rom yesterday asking me to 'Please help us complete the testing of BOINC version 7.4.36.', But unfortuently it's only two days before christmas and i don't have the time to do all the testing in the Matrix for 7.4.36, On the other hand i hoped i would get an acknolgement about my weekend Linux Bug report, even if it was just to say they understood, didn't understand, or knew about it already, But no word, so i'm disinclined to even start running through the 7.4.36 matrix, even if i was local to those machines. Claggy |
155)
Message boards :
Android :
Can't run Boinc on Nexux 7 running Android 5.0.1(Build LRX22C)
(Message 58837)
Posted 21 Dec 2014 by Claggy Post: When I try to run Boinc I get the following error. Read the very next thread?: BOINC client not working on Android 5.0 Claggy |
156)
Message boards :
Questions and problems :
BOINC 7.4.27 install problem
(Message 58806)
Posted 21 Dec 2014 by Claggy Post: So the quotation marks should be there, just not around the --detach_console command. Now it seems to be working! And is there any logging output? Any errors it writes it will write to a log file in either C:\BOINCT\ or C:\Users\\AppData\Roaming\BOINC\, so run with that for a bit and then post the outcome of it. Claggy |
157)
Message boards :
Questions and problems :
Can't set proxy
(Message 58704)
Posted 16 Dec 2014 by Claggy Post: BOINC manager doesn't let me set the proxy: when I click on Tools / Options / HTTP Proxy, the "Connect through HTTP Proxy" option is grayed out. Tick the 'Connect via HTTP proxy server' Box in the top left corner to ungrey the options. Claggy |
158)
Message boards :
BOINC client :
BOINC 7 development discussion thread.
(Message 58578)
Posted 9 Dec 2014 by Claggy Post: Seems some of the text for the Boinc 7.4.35 changelog is missing in Message 58529: The full text: client: fix bug where GPU jobs non suspended Claggy |
159)
Message boards :
Questions and problems :
Cannot start up BOINC 7.4.27
(Message 58560)
Posted 9 Dec 2014 by Claggy Post: If you don't tell us the very minimum, we can't tell: When requesting help on these forums. Lets start with what version of Linux, OS X or Windows you're running. Claggy |
160)
Message boards :
Questions and problems :
Several Problems With BOINC
(Message 58505)
Posted 7 Dec 2014 by Claggy Post: How about just (as (Read about installing) shows): sudo add-apt-repository ppa:costamagnagianfranco/locutusofborg-ppa Step 2: Open a terminal and enter: Claggy |
161)
Message boards :
Questions and problems :
boinccmd how to check if it works?
(Message 58498)
Posted 7 Dec 2014 by Claggy Post: both way removing i got a error Bump. If you don't supply the password from the gui_rpc_auth.cfg file, you don't get to control: http://boinc.berkeley.edu/wiki/Controlling_BOINC_remotely Access control for GUI RPC Claggy |
162)
Message boards :
Questions and problems :
boinccmd how to check if it works?
(Message 58493)
Posted 7 Dec 2014 by Claggy Post:
In your case, you're got to use your account key, i wasn't going to actually post mine. i use URL Email pwd You can't use Email and pwd for that command, the usage says account key, read the wiki: http://boinc.berkeley.edu/wiki/Boinccmd_tool --project_attach URL account_key Claggy |
163)
Message boards :
Questions and problems :
More Nvidia cuda openCL whatever problems
(Message 58492)
Posted 7 Dec 2014 by Claggy Post: Also that coming back to the previous drivers would do it, because the current ones are CUDA 6.5, only 64 bits bla bla bla, nothing: No, It doesn't say Boinc detects Cuda, it says it detects OpenCL, Cuda support will be detected on a different line. Claggy |
164)
Message boards :
Questions and problems :
boinccmd how to check if it works?
(Message 58454)
Posted 6 Dec 2014 by Claggy Post: I tried it on my Raspberry Pi running Boinc 7.0.27 and it worked without needing to change directories or entering the gui_rpc_auth.cfg password (my gui_rpc_auth.cfg is supplied empty): pi@raspberrypi ~ $ boinccmd --project_attach http://climateprediction.net my_account_key pi@raspberrypi ~ $ boinccmd --project http://climateprediction.net detach and Boinc successfully atttaches and detaches: Sat 06 Dec 2014 16:12:31 UTC | | Starting BOINC client version 7.0.27 for arm-unknown-linux-gnueabihf after putting boinc into the gui_rpc_auth.cfg (it's in /etc/boinc-client on my host) and restarting the host, now i get: pi@raspberrypi ~ $ boinccmd --project_attach http://climateprediction.net my_account_key Error -155: authentication error Using my password of boinc of cause works: pi@raspberrypi ~ $ boinccmd --passwd boinc --project_attach http://climateprediction.net my_account_key pi@raspberrypi ~ $ boinccmd --passwd boinc --project http://climateprediction.net detach 06-Dec-2014 16:43:48 [---] This computer is not attached to any projects Trying to attach from the /var/lib/boinc-client directory without a password didn't work (not surprising as the client isn't this directory): pi@raspberrypi /var/lib/boinc-client $ boinccmd --project_attach http://climateprediction.net my_account_key Error -155: authentication error the password being required to make it work: pi@raspberrypi /var/lib/boinc-client $ boinccmd --passwd boinc --project_attach http://climateprediction.net my_account_key pi@raspberrypi /var/lib/boinc-client $ boinccmd --passwd boinc --project http://climateprediction.net detach 06-Dec-2014 17:01:12 [http://climateprediction.net/] Master file download succeeded Claggy |
165)
Message boards :
Questions and problems :
boinccmd how to check if it works?
(Message 58453)
Posted 6 Dec 2014 by Claggy Post: both way removing i got a error You're not doing it from directory that contains the client, Because of that you're got to supply the password to access that directory and you're not doing that: http://boinc.berkeley.edu/wiki/Boinccmd_tool The usage of boinccmd is: So try: boinccmd --passwd passwd --project http://climateprediction.net detach Claggy |
166)
Message boards :
Questions and problems :
7.4.27 client can't start because of wxWidget failure
(Message 58415)
Posted 3 Dec 2014 by Claggy Post: Does Boinc 7.4.32 fix this? Claggy |
167)
Message boards :
News :
BOINC 7.4.26/.27 released to the public
(Message 58078)
Posted 23 Nov 2014 by Claggy Post: I have just installed BONIC 7.4.27 (+ V Box) to both my PC and Laptop, This is the BOINC Development forum, We deal with problems with BOINC, that is B O I N C, Not BONIC. Claggy |
168)
Message boards :
Questions and problems :
CLInfo says I have OpenCL 1.2, so what do I do next?
(Message 57980)
Posted 21 Nov 2014 by Claggy Post: CLInfo seems to sugegst that I already have OpenCL 1.2, so what do I need to do next if anything? In what respect? What are you trying to achieve? Claggy |
169)
Message boards :
Questions and problems :
Is there a way to limit only download times?
(Message 57919)
Posted 20 Nov 2014 by Claggy Post: You could do a script to set each project to No New Tasks at the end of your unlimited period, and another one to unset NNT after the beginning of your unlimited period. (If Boinc can't ask for work it can't download anything, it'll only upload and report tasks as they complete) http://boinc.berkeley.edu/wiki/Boinccmd_tool --project URL operation Claggy |
170)
Message boards :
Questions and problems :
Regression in BOINC client 7.4.27: GPU not found
(Message 57910)
Posted 19 Nov 2014 by Claggy Post: 18-Nov-2014 06:35:19 [---] GPU specified in cc_config.xml: 1 ATI What have you got specified in your cc_config.xml, and why? Boinc can do it's own Nvidia & ATI/AMD & Intel GPU detection without any extra config help. Claggy |
171)
Message boards :
Questions and problems :
Update BOINC
(Message 57733)
Posted 17 Nov 2014 by Claggy Post: The last Recommended Release of Boinc was 7.2.42, The latest is 7.4.27 Claggy |
172)
Message boards :
Projects :
Problem with no disk space for SETI@home
(Message 57557)
Posted 11 Nov 2014 by Claggy Post: Is this using Web or Local Preferences? If you think you're using Web preferences, does anything change when you Clear the local preferences? Can you post the actual message from the Event log too please. Claggy |
173)
Message boards :
Questions and problems :
Problem with acount info.
(Message 57505)
Posted 9 Nov 2014 by Claggy Post: Log onto Your Setiathome Account using your email address and password (on their web site), If you can log on, you can change your email address or password, If you're gorgotten your password or email address you can hit the forgotten password/email address link, and eithier log on via your authenticator or reset your password. Claggy |
174)
Message boards :
Questions and problems :
Authorization failure: -155
(Message 57497)
Posted 9 Nov 2014 by Claggy Post: Hello! Have you tried running boinccmd from the same directory?: http://boinc.berkeley.edu/wiki/Boinccmd_tool And using the password if you're not? Claggy |
175)
Message boards :
Android :
"Force start" button
(Message 57464)
Posted 8 Nov 2014 by Claggy Post: The Google group is the place where one can find the Android developers Joachim and Rom. That might be a problem, Joachim did the GUI: Thanks for the report. Claggy |
176)
Message boards :
Projects :
FightAIDS@home-Vina Problem
(Message 57383)
Posted 6 Nov 2014 by Claggy Post: It either means your device has a very small amount of storage space available, Or that it's preferences are set to a low value, mine are set to 90% and leave 0.1Gig free, (This is locally on the device, Boinc on Android doesn't use the Web Computing preferences) Claggy |
177)
Message boards :
Android :
boinc client for android doesn't start
(Message 57381)
Posted 6 Nov 2014 by Claggy Post: I downloaded from boinc.berkeley.edu. In addition to this, there is a question mark as the icon of the file. To install apps from websites other than an app store, you need to go into settings/security and allow installing from unknown sources. (Allow installation of applications from both trusted and unknown sources) Claggy |
178)
Message boards :
Android :
boinc client for android doesn't start
(Message 57362)
Posted 5 Nov 2014 by Claggy Post: I could download the file but it says "the file can't open.". The boinc client version is 7.2. Where did you download it from?, the Google Play app store, another app store, or direct from Berkeley? Claggy |
179)
Message boards :
Questions and problems :
Continued from thread 8857 (re moving BOINC from SSD to HDD)
(Message 57259)
Posted 2 Nov 2014 by Claggy Post: I think as SSDs become more ubiquitous, and until the current SSD write-cycle limitation problem has been resolved, this process is likely to be useful for many people. In my opinion, it would be worth publishing it neatly and concisely in the user manual, perhaps under "Running BOINC: advanced". One problem there, the Debian/Ubuntu Repository Boinc isn't done by Berkeley, it's done by the Debian Boinc Maintainers, using their version of the Boinc source: http://anonscm.debian.org/cgit/pkg-boinc/boinc.git it would be better if you asked them for a method/instructions to move their installation to another drive on their package pages: https://packages.qa.debian.org/b/boinc.html Claggy |
180)
Message boards :
Questions and problems :
can i only running cpu work for night?
(Message 57202)
Posted 29 Oct 2014 by Claggy Post: Set up a BAT to use Boinccmd is suspend GPU usage at a set time, and another to resume usage, or set a duration: http://boinc.berkeley.edu/wiki/Boinccmd_tool --set_run_mode {always | auto | never} [ duration ] Claggy |
181)
Message boards :
BOINC Manager :
Update project list in Boinc Manager
(Message 57163)
Posted 28 Oct 2014 by Claggy Post: David does not read these forums, not even when I point out things, so when you have information about defunct projects, best email him about it. He forgets, So after a suitable delay, email him again. Claggy |
182)
Message boards :
Questions and problems :
"Notices" tab says I'm running out of space but I'm not
(Message 57028)
Posted 24 Oct 2014 by Claggy Post: OK thanks. What I meant by 'default' was that I have never changed the settings. I installed the application and some projects, and have never changed anything other than that which is why I wanted to find out why the number of concurrently-running tasks has been decreasing recently. You're right, I've logged onto a 2nd account of mine, and reset the computing preferences to default (not that I've used that account since seti classic), the default preferences show 'Disk: use at most --- GB (0 means no restriction)' and not a figure. I was also wrong about 0 Gig meaning 0 Gig. Claggy |
183)
Message boards :
BOINC Manager :
OS X v. 7.4.23 - project URL in "Add project" in unreadable
(Message 57007)
Posted 23 Oct 2014 by Claggy Post: This is probably caused by the top entry in the event log not being exactly aligned with the top of the scrolling window. As you gradually enlarge the event log dialog (vertically), blank space slowly grows at the bottom until there's enough room for another complete line to be displayed. But because the top line is a little too low, the bottom line overlaps the bottom margin, but only while there's exactly enough space to display an integer number of lines. Thanks, that is it, I have my Event Log expanded to fill the screen, But not maximised, changing the size of the Event Log screen makes the characters fully visible. Claggy |
184)
Message boards :
BOINC Manager :
OS X v. 7.4.23 - project URL in "Add project" in unreadable
(Message 57005)
Posted 23 Oct 2014 by Claggy Post: I have a similar minor visual anomaly, On Boinc 7.4.22 x64 on Windows, On the Bottom line of the Event Log, all the characters with tails descend below the Bottom Border, These range form the bottom portion of the square brackets [] to y, p, q and g Claggy |
185)
Message boards :
Questions and problems :
"Notices" tab says I'm running out of space but I'm not
(Message 57004)
Posted 23 Oct 2014 by Claggy Post: What do your Boinc Computing preferences say for Disk and memory usage? Setting Disk use at most to Zero Gigabytes means exactly that, and that setting isn't the default. Claggy |
186)
Message boards :
Questions and problems :
"Notices" tab says I'm running out of space but I'm not
(Message 56993)
Posted 23 Oct 2014 by Claggy Post: Where is BOINC Manager getting these numbers from? Boinc Manager (the GUI) gets these from the Boinc client, which in turn gets these figures from your computing preferences, or if you're using local preferences from those instead. How can I stop this from happening? What do your Boinc Computing preferences say for Disk and memory usage?, Doesn't matter how much space is actually available on the disk, If you're only allowing say 0.001 Gig, then Boinc will only use 0.001 Gig. Increase the amount of usage allowed, and/or reduce the amount of disk that has to be keep free, and/or increase the Disk: use at most figure. Claggy |
187)
Message boards :
Android :
boinc client for android doesn't start
(Message 56751)
Posted 17 Oct 2014 by Claggy Post: boinc client for android doesn't start on my phone. why? If you don't give us some basic information on your phone, then the only answer we can give is Who knows. So phone make and model, Android version, CPU make and model, Boinc version. Claggy |
188)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 56712)
Posted 14 Oct 2014 by Claggy Post: Main & Beta are back up. Claggy |
189)
Message boards :
Questions and problems :
BOINC not reading app_config.xml files
(Message 56673)
Posted 13 Oct 2014 by Claggy Post: Thanks for the reply, Claggy It you restart Boinc it should read it by default, You can also use command line tools: http://boinc.berkeley.edu/wiki/Boinccmd_tool --read_cc_config should read it (as well as the cc_config.xml), C:\Program Files\BOINC>boinccmd --read_cc_config retval 0 13/10/2014 20:08:32 | | Re-reading cc_config.xml 13/10/2014 20:08:32 | | Using proxy info from GUI 13/10/2014 20:08:32 | | Not using a proxy 13/10/2014 20:08:32 | | Config: GUI RPCs allowed from: 13/10/2014 20:08:32 | | P5N-E-SLI 13/10/2014 20:08:32 | | SAMSUNG-R700 13/10/2014 20:08:32 | | log flags: file_xfer, sched_ops, task, coproc_debug, cpu_sched, sched_op_debug 13/10/2014 20:08:32 | Albert@Home | Found app_config.xml 13/10/2014 20:08:32 | climateprediction.net | Found app_config.xml 13/10/2014 20:08:32 | Einstein@Home | Found app_config.xml 13/10/2014 20:08:32 | PrimeGrid | Found app_config.xml 13/10/2014 20:08:32 | SETI@home Beta Test | Found app_config.xml 13/10/2014 20:08:32 | SETI@home | Found app_config.xml Claggy |
190)
Message boards :
Questions and problems :
BOINC not reading app_config.xml files
(Message 56668)
Posted 13 Oct 2014 by Claggy Post: Hi numbermaniac, Once the app_config.xml is in the project directory, all you need to do is, in Boinc Manager, go Advanced > Read config files. Claggy |
191)
Message boards :
Questions and problems :
BOINCManager / astropulse crashes system to reboot on Mac OS X
(Message 56641)
Posted 12 Oct 2014 by Claggy Post: I've linked this thread to the APv7-related issues and errors thread over at Setiathome, can you post over there please, then at least we can see a few details about your host. Claggy |
192)
Message boards :
Questions and problems :
Astropulse
(Message 56630)
Posted 11 Oct 2014 by Claggy Post: Look at your project preferences. Claggy |
193)
Message boards :
Questions and problems :
BOINC 7.4.22
(Message 56593)
Posted 9 Oct 2014 by Claggy Post: 10/9/2014 5:59:35 PM | | CAL: ATI GPU 0: AMD Radeon HD 7850/7870 series (Pitcairn) (CAL version 1.4.1848, 2048MB, 2008MB available, 7040 GFLOPS peak) Lol, that looks like the biggest misconfigure ever, the trick with OpenCL apps especially AMD apps is to leave a free (real or hyper threaded) core free per one or two GPUs, so on your 4 core i7-3770K with 4 hyper threaded cores you should be leaving something like 4 of your 8 cores free, Or something like 32 of your simulated cores, I'd be surprised if you got much GPU load even running two up on each GPU, Einstein GPU apps still have a large CPU portion. Claggy |
194)
Message boards :
Questions and problems :
BOINC 7.4.22
(Message 56588)
Posted 9 Oct 2014 by Claggy Post: I've been doing this since the first app_config option was added to BOINC so you'll have to trust me that I know exactly what I'm doing. If you absolutely know what you're doing, then it stands to reason that you're made a fatal error that causes it not to work (Been there, done that), Please supply some logs of it not working, and the Boinc startup, the developers won't believe you otherwise, and a link to the host id, for as far as we know you could only have a single task from Einstein, can't run multiple tasks on a GPU if you only have a single task. Claggy |
195)
Message boards :
Questions and problems :
BOINC 7.4.22
(Message 56583)
Posted 9 Oct 2014 by Claggy Post: What exactly are you putting in you app_config.xml? and for which project? and which app? Claggy |
196)
Message boards :
Questions and problems :
app_config.xml - < cmdline > tag - what is wrong?
(Message 56082)
Posted 16 Sep 2014 by Claggy Post: Now 2 GPU instances running as desired, but app seems doesn't get param passed via <smdline> tag. Before using app's own abilities to pass params I would like to know what is wrong in this case. What Boinc version is this on? knowing you it's on an old Alpha/Beta version where the Bugs hadn't been eliminated yet, upgrade to Boinc 7.4.21 and try again. and I only needed to use -cpu_lock Claggy |
197)
Message boards :
Questions and problems :
app_config.xml - < cmdline > tag - what is wrong?
(Message 56080)
Posted 16 Sep 2014 by Claggy Post:
I put it into my app_config.xml for Seti Beta, seems to work O.K (althrough I took it out, did a read, and restarted Boinc, and it's still enabled): Running on device number: 0 Claggy |
198)
Message boards :
Questions and problems :
Firefox toolbar buttons disappear when Boinc runs
(Message 56049)
Posted 15 Sep 2014 by Claggy Post: OS? Windows, Linux or OS X? When requesting help on these forums. A picture of it would be good too. Claggy |
199)
Message boards :
BOINC Manager :
Feature request: computing preferences in schedule
(Message 56029)
Posted 14 Sep 2014 by Claggy Post: A related feature would be the existence of computing preferences profiles where you could change from one to another with only a couple of clicks. The are four locations/venues available, 'default', 'home', 'school' and 'work', By going to your favorite project (where your computing preferences have been set), then changing the location of your host you effectively have done that. Claggy |
200)
Message boards :
Questions and problems :
Option to make a project only use 1 cpu core?
(Message 56003)
Posted 12 Sep 2014 by Claggy Post: As been pointed out else where, the Wiki says you need Boinc 7.5.1, althrough the <project_max_concurrent> option has been added to the Boinc 7.4 head, so will actually be in Boinc 7.4.9 and later. Claggy |
201)
Message boards :
Questions and problems :
Option to make a project only use 1 cpu core?
(Message 55996)
Posted 11 Sep 2014 by Claggy Post: Try the 'On multiprocessors, use at most 100% of the processors' setting instead, set to 50% for a dual core, 25% for a quad, 12.5% for a hex core, etc, the 'On multiprocessors, use at most 4 processor' is only used if the other setting has been set to Zero. Or use a app_config.xml with the following in it: <app_config> Application configuration Claggy |
202)
Message boards :
Questions and problems :
Daft question about screen saver
(Message 55978)
Posted 11 Sep 2014 by Claggy Post: That means you're not actively using the computer, so Boinc has suspended computation, probably caused by the following setting in your computing preferences: Suspend work if no mouse/keyboard activity in last --- minutes Needed to enter low-power mode on some computers There is probably a value in there, try editing your preferences, and deleting that value. Claggy |
203)
Message boards :
Projects :
New build, will these specs work..?
(Message 55935)
Posted 9 Sep 2014 by Claggy Post: I am getting ready to build my BOINC server. I was wondering if the Intel Xeon E5-4640 v2 processor is supported and if it can handle 4 of these CPUs? ? Are you building a Server so you can run a new project, Or are you building a server so you can crunch Boinc on it? (amongst other things). If you don't supply a clear description of what it's intended for, you won't get good answers. Claggy |
204)
Message boards :
GPUs :
What i do wrong?
(Message 55868)
Posted 8 Sep 2014 by Claggy Post: Before change my OS to XP AMD has deprecated CAL & OpenCL support for XP. Claggy |
205)
Message boards :
Questions and problems :
Display driver amdkmdap stopped responding and has successfully recovered.
(Message 55825)
Posted 6 Sep 2014 by Claggy Post: Project application problems are best asked at the project concerned, in this case setiathome. Claggy |
206)
Message boards :
Android :
SETI@Home results fail - show 11 (0xb) Unknown error number - Computation error
(Message 55804)
Posted 4 Sep 2014 by Claggy Post: Is this an issue with the application, with my hardware, or with the application configuration? Problem with the application on specific hardware, you could attach to the Seti Beta project and see if the 7.28 applications are any better, it's been an ongoing problem, some devices run the apps fine, others don't. Claggy |
207)
Message boards :
Questions and problems :
BOINC 7.2.42 and app_config.xml
(Message 55759)
Posted 31 Aug 2014 by Claggy Post: However, if no other work is available from other projects, it seems to get ignored and run on all cores! Strange that, If you put the wrong application name in, it then doesn't work: Double Check that the name is actually ATLAS by looking in your client_state.xml (Don't modify it!!!), according to the applications page it should be 'ATLAS_Simulation' Then try ATLAS_Simulation instead. Claggy |
208)
Message boards :
Android :
Cannot add new project
(Message 55725)
Posted 29 Aug 2014 by Claggy Post: Rom sent this thread to the Android Development list. I also have to admit I couldn't find it (at first) when I wanted to re-add Albertathome to my HTC One S after it's Boinc 7.4.13 episode. Claggy |
209)
Message boards :
Android :
Cannot add new project
(Message 55722)
Posted 29 Aug 2014 by Claggy Post: The Hamburger for me, On Android 4.1.1 (It's the same on my 2012 Nexus 7 running Android 4.4.4) There's already been a bit of confusion there about this, Rom has already asked: How hard would it be to move the attach to project by URL functionality into the main attach work flow? Joachim Fritzsch answer was: Project that are not in the pre-defined list (e.g. http://ralph.bakerlab.org/) can be attached by: 1. go to projects screen 2. select the three dots on the top right / if you are on Android 2.3.3 or earlier, press the menu button 3. select "add project by URL" 4. enter URL and continue. Thanks for your help! Rom also asked (from Nikolay Saharov): And there is a small suggestion. Is it possible to indicate in Add projects screen which projects already added? Claggy |
210)
Message boards :
Android :
Cannot add new project
(Message 55719)
Posted 29 Aug 2014 by Claggy Post: The hamburger on the left is only used from the initial Tasks screen, to get to the menu, there select Projects, don't select a project, but just press the hamburger key on the phone. That opens, for me at least, the Add URL menu. The Hamburger for me, On Android 4.1.1 (It's the same on my 2012 Nexus 7 running Android 4.4.4), Opens selections to get to: Tasks Notices Projects All the projects attached to (under each other) Add project Preferences Help About Event Log There is no physical Hamburger button on my mobile, or my Tablet, there is on my Old HTC Desire, But since it only runs Android 2.2.1 it can't run Boinc, and has to settle with NativeBoinc. Claggy |
211)
Message boards :
Android :
Cannot add new project
(Message 55714)
Posted 29 Aug 2014 by Claggy Post: In Boinc 7.4.14, I go to the Projects Tab, then in the right corner, I have three selections, a pause selection (suspends computation), a + selection (adds projects), and : selection (actually 3 vertical dots, this is add a project by URL) My Hamburger is a Graphic in the top left corner as in this picture, But there are three selections on the right on Boinc 7.4.14 (Joachim has been changing the UI on Boinc 7.4.x): Claggy |
212)
Message boards :
Android :
Cannot add new project
(Message 55711)
Posted 29 Aug 2014 by Claggy Post: It may be difficult to see, it's at the bottom of the screen and black text on a dark blue background. What Boinc version are you actually running? In Boinc 7.4.14, I go to the Projects Tab, then in the right corner, I have three selections, a pause selection (suspends computation), a + selection (adds projects), and : selection (actually 3 vertical dots, this is add a project by URL) Don't go to the add project, or via the Hamburger to add projects, these only show Official Non-Alpha, non-Beta projects, and the Add account manager selections, there is no add project by URL selection there. Claggy |
213)
Message boards :
Android :
Cannot add new project
(Message 55710)
Posted 29 Aug 2014 by Claggy Post: Made it into an image. Claggy |
214)
Message boards :
Android :
"No new tasks" and will updating reset projects?
(Message 55523)
Posted 22 Aug 2014 by Claggy Post: If you upgrade, the tasks, host id's etc are preserved, you could get the 7.4.14 from the download directory, install it manually and your tasks are still preserved. If you uninstall, then install a new version then they are not preserved. Edit: Which is why my Nexus 7 at Albert has a New Host ID that I've yet to merge (Boinc 7.4.13 was broken, so had to uninstall to get back to 7.3.17): http://albertathome.org/host/11729 http://albertathome.org/host/8807 To set NNT, go to the project tab, tap the project you want to set NNT, and select No New Tasks. Claggy |
215)
Message boards :
Questions and problems :
GPU stopped working yesterday
(Message 55311)
Posted 10 Aug 2014 by Claggy Post: Through Windows update, I updated the adapter for my Nvidia GT 740m, and after that my PrimeGrid tasks that ran on the GPU were reporting that the only usable GPU was an emulator, Install drivers from Nvidia.com, the ones that come from Windows update don't come with Cuda, OpenCL, OpenGL support, etc. Claggy |
216)
Message boards :
GPUs :
Run only GPU tasks
(Message 55294)
Posted 9 Aug 2014 by Claggy Post: I wan the other computers on that project to use the cpu, only one computer should only use gpu You have four locations to choose from, make a different set of preferences at one at your other locations, and move your computer to it. Claggy |
217)
Message boards :
Questions and problems :
BOINC 7.2.42 and app_config.xml
(Message 55209)
Posted 1 Aug 2014 by Claggy Post: For anyone else wanting to help, this topic has come over from this thread at : Proposal to limit tasks in parallel Double Check that the name is actually ATLAS by looking in your client_state.xml (Don't modify it!!!), according to the applications page it should be 'ATLAS_Simulation' and according to your list of tasks, it is 'ATLAS_Simulation' too: http://atlasathome.cern.ch/results.php?hostid=3068 Claggy |
218)
Message boards :
Projects :
News on Project Outages
(Message 55186)
Posted 31 Jul 2014 by Claggy Post: The reason: Project server changed In last few hours we moved Radioactive@Home server to another dedicated machine. Claggy |
219)
Message boards :
Questions and problems :
Tasks Not Uploading and No New Tasks Downloading
(Message 55170)
Posted 31 Jul 2014 by Claggy Post: From the Rosetta front page: Jul 30, 2014 Claggy |
220)
Message boards :
Projects :
News on Project Outages
(Message 55165)
Posted 30 Jul 2014 by Claggy Post: Radioactiveathome seem to be down, no uploads, no scheduler contacts, Can't even get to their website. Claggy |
221)
Message boards :
Questions and problems :
Tasks Not Uploading and No New Tasks Downloading
(Message 55164)
Posted 30 Jul 2014 by Claggy Post: What project is this on? Are their Servers up? What does their Server Status page say? Their Project, their Servers, this Web forum/Server is totally independent to any project, If you have problem getting work from Setiathome, ask them, If from Einstein, ask at Einstein's forum, if it's from CPDN, ask on their forum. Claggy |
222)
Message boards :
Questions and problems :
Not getting GPU WUs
(Message 55085)
Posted 25 Jul 2014 by Claggy Post: The cheatsheet speaks of XP? What does that mean? It was done by a user at Setiathome, where most GPU users were running Windows, some Windows XP, AMD both deprecated CAL/OpenCL Support for Windows XP, and for CAL/OpenCL support for HD4*** GPUs on other OS's. Claggy |
223)
Message boards :
Questions and problems :
Not getting GPU WUs
(Message 55079)
Posted 24 Jul 2014 by Claggy Post: For OpenCL support on AMD/ATI GPUs you need a HD4*** or later GPU, But for HD4*** GPUs there was only ever Beta OpenCL support, and that support has been deprecated in later drivers meaning a HD5*** or later GPU is required for OpenCL support. Event log tells me form startup: Your host isn't even detecting a CAL GPU, but your host does detect OpenCL support for the CPU, since AMD/ATI also deprecated CAL support for older GPUs, it could be that you have a too recent driver/APP runtime installed, it could also mean that that Boinc can't access the GPU, try reading through the Debian/Ubuntu/Mint/Derivatives - GPU recognition fixes thread. ATI Driver Version Cheat Sheet AMD has this page showing the current supported GPUs: MD5 Checksums, System Requirements & Driver Compatibility You can't find the older SDK's GPU requirements on AMD's site, but this site gives the older GPUs with OpenCL Beta support: AMD APP SDK 2.6 available for download - first glimpse of OpenCL 1.2 [Update] Claggy |
224)
Message boards :
Questions and problems :
Not getting GPU WUs
(Message 55076)
Posted 24 Jul 2014 by Claggy Post: Hum, without giving us any useful information, we can't help you: When requesting help on these forums. Boinc version? OS? Projects attached to? Boinc startup Log? etc, etc, etc. Most likely it's because you're got an old GPU, that only supports CAL, while most projects have moved onto using OpenCL which your GPU does not support. Claggy |
225)
Message boards :
Questions and problems :
Find upload stats.
(Message 55022)
Posted 24 Jul 2014 by Claggy Post: Hello. Yes, at Seti it is 24 hours after validation, other projects have different timescales before tasks/workunits are remove from their Boinc databases. Claggy |
226)
Message boards :
Android :
"Power sources for computation" no longer allows battery?
(Message 54962)
Posted 21 Jul 2014 by Claggy Post: Oh, ha, great thanks! Turned out the selection box was just hidden by the red. An invisible selection box. Thanks again! The checkbox became invisible on some devices like my 2012 HTC One S, upgrading to Boinc 7.3.17 should fix that, Claggy |
227)
Message boards :
Questions and problems :
Intel i7 Turbo Boost not boosting at 100%
(Message 54866)
Posted 13 Jul 2014 by Claggy Post: Whether the processor Turbo Boosts depends on how much power it pulls, it's cooling etc, My i5-3210M will Turbo Boost to 3.1GHz when running a single thread, but will only go to 2.9GHz when running multiple threads, If things are too hot it'll drop the clock in .1GHz steps, So make sure your cooling is up to scratch. Claggy |
228)
Message boards :
Android :
app keep timing without really crunching
(Message 54790)
Posted 7 Jul 2014 by Claggy Post: The setiathome Android Arm apps are are work in progrees, the don't always work well on all devices, you're had two tasks error: Computer 7329090 All tasks for computer 7329090 http://setiathome.berkeley.edu/hosts_user.php That url takes me to my hosts, and anyone else who looks at it will take them to their hosts. ALSO, i have 2 processors. but only 2 tasks. shouldn't it download 3 tasks (1 spare, so when one runs out, it can start processing the next task. it will, when it's far enough through it's existing tasks. Claggy |
229)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54769)
Posted 5 Jul 2014 by Claggy Post: Yes, we've been there already. :-) Ah yes, you have, I saw the pictures, then nothing else. ;-) Claggy |
230)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54765)
Posted 5 Jul 2014 by Claggy Post: All Nvidia GPUs from an 8300GT and higher will be able to do CUDA. There's also no real need to buy a new card for that computer, second or third hand is good enough. Motherboards with integrated 8200 GPUs can also do Cuda: http://www.nvidia.co.uk/object/geforce_8200mgpu_uk.html Message 8756 I have a feeling there are 8100 integrated GPUs, although I can't find reference of them on Nvidia site any longer, I did report about them some years ago: http://setiathome.berkeley.edu/forum_thread.php?id=70821&postid=1338421 Edit: found it: GeForce 8100 mGPU Claggy |
231)
Message boards :
Questions and problems :
samsung galaxy phone -GT-s7275r BOINC
(Message 54751)
Posted 5 Jul 2014 by Claggy Post: Probably to do with your setting of CPU used for BOINC - 60% Try setting that to 100% For Boinc to run an app 60% of time it'll run for 6 seconds, then suspend for 4 seconds, I suspect there's an unresolved issue with this setting, tasks are purged from memory when suspended, so it's probably restarting from it's last checkpoint each time, you don't say what version Boinc this is on. Claggy |
232)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54717)
Posted 3 Jul 2014 by Claggy Post: Thank you everyone, I just think another way, I have a Pentium 4 computer not in use, maybe I can put a Tesla card on it, that will be very efficiency. Any ideas? Pentuim 4's are slow, and very inefficient compared to modern desktop CPUs. Claggy |
233)
Message boards :
Questions and problems :
getting many "validation inconclusive"
(Message 54708)
Posted 2 Jul 2014 by Claggy Post: Ps. You are perfectly right about the OpenCL-thing. It's not possible to avoid getting OpenCL tasks. They keep loading on the task list... but I reject them manually. You can of cause deselect 'Gamma-ray pulsar search #3' then you GPU won't be sent OpenCL tasks for that type of Wu, and if you deselect 'Run beta/test application versions?' or 'Gravitational Wave S6 Directed Search (CasA)' you won't be sent OpenCL CasA Wu's. Claggy |
234)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54707)
Posted 2 Jul 2014 by Claggy Post: Good to know, Claggy. Digging out my wattmeter, my HTC One S is pulling around 3 Watts, the 2012 Nexus 7 the same, Claggy |
235)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54692)
Posted 2 Jul 2014 by Claggy Post: Thank you, but I don't think atom is good for BOINC, because the CPU speed is very low, but I just think is it ok if I put a graphic card to it. My Atom N450 is almost as fast as my fastest ARM device, and a lot faster than my other ARM devices: All Binary Radio Pulsar Search tasks for computer 10847 Atom N450 @1.66GHz All Binary Radio Pulsar Search tasks for computer 9756 HTC One S ARM/Qualcomm Snapdragon S4 @1.51GHz All Binary Radio Pulsar Search tasks for computer 8807 2012 Nexus 7 ARM/Nvidia Tegra @1.20GHz All Binary Radio Pulsar Search tasks for computer 11206 Parallella ARM/Zynq-7020 ARM A9 @700MHz (I think) Claggy |
236)
Message boards :
Questions and problems :
Ideal device for BOINC?
(Message 54682)
Posted 1 Jul 2014 by Claggy Post: I can give instructions on compiling Boinc for Linux, the Software prerequisites required as I've compiled Boinc for the Raspberry Pi running Raspbian Linux, and the Parallella running Linaro Ubuntu, what you might have difficulty is in the GPU detection, Einstein and Albert at home both have Arm Linux applications in Neon and non-Neon versions, they should work without too much problem. Claggy |
237)
Message boards :
Questions and problems :
Client not uploading results
(Message 54653)
Posted 30 Jun 2014 by Claggy Post: Any ideas? Ask at CPDN, it is their server, they do tend to fill up their drives and have to move things around to free up space. Claggy |
238)
Message boards :
Questions and problems :
Strange Boinc Manager Task Switching Behavior
(Message 54633)
Posted 28 Jun 2014 by Claggy Post: Minimum work buffer: .10 days Boinc 7 has a the ground up rewritten scheduler, the first setting is how much Boinc should cache all the time, every half a day it'll ask for work to bring the level of work up to 0.6 days, then it'll wait for the level of work to drop below 0.1 days before asking again, The first setting also means how much time the host is going to be off the net, So Boinc will try and get all the work done by 0.1 days before deadline, were you to swap the setting around to 0.5 minimum, and 0.1 additional, Boinc will then try and get work done 0.5 days before deadline, (It'll bump tasks into high priority to get them done sooner, rather than doing round robin scheduling) it'll still cache 0.6 days total, but it'll ask every 0.1 days to keep it at 0.6 days. Claggy |
239)
Message boards :
Questions and problems :
BOINC keeps reseting to 'zero'
(Message 54629)
Posted 28 Jun 2014 by Claggy Post: Can you post the Boinc startup from the Event log please. What kind of separate hard drive is your Data directory on? USB? Claggy |
240)
Message boards :
Questions and problems :
Strange Boinc Manager Task Switching Behavior
(Message 54628)
Posted 28 Jun 2014 by Claggy Post: What are your cache settings? Claggy |
241)
Message boards :
Questions and problems :
Tasks with GPU never complete - they get to 88.5% or thereabouts and just hang forever?
(Message 54598)
Posted 26 Jun 2014 by Claggy Post: This isn't a project forum, we can't just look at your hosts to see what errors they suffer from. So at the moment we know you have an unknown GPU from an unknown GPU manufacture, running on an unknown OS, and running an unknown GPU app. When requesting help on these forums. Claggy |
242)
Message boards :
Questions and problems :
boinc "not requesting tasks: don't need" even with NO tasks currently running and idle CPU
(Message 54581)
Posted 24 Jun 2014 by Claggy Post: Hi, Eh, Boinc version? OS version? Projects attached to? When requesting help on these forums. When you come here on our forums to ask for help, you know what your problem is. You see your problem, now all you have to do is explain to us what it is that you see. It's quite difficult for any of the helping crew to get to help you when you do not give any information about what you actually see. The details on what BOINC version, OS and all that gives us a better understanding of the system and environment, but that's all. Claggy |
243)
Message boards :
Questions and problems :
current problem... doesn't stay on a unit.
(Message 54569)
Posted 23 Jun 2014 by Claggy Post: that is... the screen's changing to a different work unit about every 2-3 seconds. Who knows? probably erroring. What does the task page of one of those Wu's say? Claggy |
244)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54543)
Posted 22 Jun 2014 by Claggy Post: The two installation of Jessie I have with 3.12.22+ and Boinc 7.3.19 don't lockup any longer, Both on updating to Boinc 7.3.19 error their Wu's instead: http://setiathome.berkeley.edu/results.php?hostid=7285452 http://setiathome.berkeley.edu/results.php?hostid=7299597 <core_client_version>7.3.19</core_client_version> <![CDATA[ <message> process exited with code 193 (0xc1, -63) </message> <stderr_txt> boinc-app-seti is invoked with the following arguments: --start --end. I: boinc_parse_init_data_file I: boinc_get_init_data I: boinc_init I: worker I: worker() - common_init I: worker() - read_wu_state SIGSEGV: segmentation violation Stack trace (9 frames): /usr/lib/libboinc.so.7(boinc_catch_signal+0xd8)[0xb6e42990] /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer_v2+0x0)[0xb690e5b0] ../../projects/setiathome.berkeley.edu/setiathome_v7(+0x6ad68)[0xb6f63d68] ../../projects/setiathome.berkeley.edu/setiathome_v7(+0x27498)[0xb6f20498] ../../projects/setiathome.berkeley.edu/setiathome_v7(+0x22b78)[0xb6f1bb78] ../../projects/setiathome.berkeley.edu/setiathome_v7(+0x293cc)[0xb6f223cc] ../../projects/setiathome.berkeley.edu/setiathome_v7(+0x29724)[0xb6f22724] ../../projects/setiathome.berkeley.edu/setiathome_v7(main+0x21c)[0xb6f00508] /lib/arm-linux-gnueabihf/libc.so.6(__libc_start_main+0x114)[0xb68f7294] Exiting... </stderr_txt> ]]> Claggy |
245)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54529)
Posted 21 Jun 2014 by Claggy Post: My Pi that was running kernel 3.10.37 on Raspbian Wheezy also updated to 3.12.20+ just by use of sudo apt-get update && sudo apt-get upgrade, It's still running without a problem through, the difference is, it's running a self compiled Boinc 7.2.47, rather than the Raspbian repository Boinc 7.2.47/7.3.19 So I reckon there's a problem between the Debian source, the Raspbian source and the actual compiling for the Pi, along with perhaps kernel or compiler Bug. Claggy |
246)
Message boards :
GPUs :
No PrimeGrid work units received
(Message 54348)
Posted 6 Jun 2014 by Claggy Post: As for OpenCL support, I'll have to take a look at that tomorrow when I'm back on the computer in question. I assume I can use something like GPU-Z to check for this support, yes? I wouldn't trust GPU-Z to whether OpenCL support is there or not, I've seen false negatives there before, better to use GPUCapsViewer, that will show far more detail, The easiest method is to just restart Boinc, and look at the Event log, and post the first 30 lines or so, that will show whether Boinc can detect OpenCL for the device, and it's Boinc that needs to be able to detect and use OpenCL, it's entirely possible for support to be on a computer, but Boinc being unable to detect it. Claggy |
247)
Message boards :
GPUs :
No PrimeGrid work units received
(Message 54344)
Posted 5 Jun 2014 by Claggy Post: Not sure why. GPU is reported as CAL ATI Radeon HD 4350/4550 (R710) (512MB) driver: 1.4.1734, and the event log recognises the GPU, so it's not saying 'no usable GPUs found' or anything. The PrimeGrid entries just say that 0 work units were received. Does it show any OpenCL support? Your snippit is only showing CAL support, most projects have OpenCL ATI apps nowadays, What version of Boinc are you using? Does it even do OpenCL detection? Causes? I've already checked PrimeGrid's computing preferences, so no issues there. Computing preferences is a Global preference, you set it at one project, and it effects all projects, it shouldn't matter which project you set it at, PrimeGrid preferences, note there is no 'computing' in it, is a project specific preference, that is where you select the type of work, and the device type that is allowed to get work, So, did you look at the Computing preferences at primeGrid, or the PrimeGrid preferences, or Both? Claggy |
248)
Message boards :
BOINC client :
BOINC on Fedora 20 - Intel Graphics 5000
(Message 54339)
Posted 5 Jun 2014 by Claggy Post: I've switched to Fedora 20 now development reasons. Official Intel OpenCL support on Intel GPUs under Linux isn't supposed to be available: OpenCL & HD Graphics 4000 & Linux Support OpenCL SDK 1.2 for Linux, without Xeon? There is an open source project: Meanwhile, you may want to try the open source project beignet. This project provide am open source alpha software for OpenCL on Intel HD Graphics 4000. It is not commercial product by Intel, but is available for the open source community. If you can supply a CLinfo output of an Intel GPU under Linux, then maybe the Boinc developers could add support. Claggy |
249)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54249)
Posted 23 May 2014 by Claggy Post: Been setting up another SDCard with Jessie on it, but with 3.10.25+ kernel, still ongoing when I was there last, Browsing Github, I've found the ticket for our Bug: https://github.com/raspberrypi/linux/issues/600 I do have a serial cable, although I've never used it before, I'm able to do the last request without problem, and I can reimage my new SDCard with Wheezy and the lastest firmware if necessary, and put Boinc on it. Claggy |
250)
Message boards :
Questions and problems :
Starving the GPU with inadequate CPU resources?
(Message 54241)
Posted 22 May 2014 by Claggy Post: My question is, if I am crunching 3 CPU workunits and using the GPU to crunch a workunit and it only requires, say 0.04% of a CPU, am I starving the GPU of CPU resources by limiting the BOINC client to 75% (or 3 CPUs)? The Setiathome Cuda apps don't require any reserved cores, you should get similar performance when using all CPU core for crunching, it has a config text file called mbcuda.cfg where you can change the thread priority to help maximise performance rather than reserving cores. These workunits usually require 0.04% of a CPU. This is a theoretical amount of CPU usage that gets supplied to Boinc for it's scheduling decisions, add up enough of them (if you're running multiple GPU tasks) and Boinc will run one less CPU task, Claggy |
251)
Message boards :
BOINC Manager :
BOINC ignores CPU limits
(Message 54240)
Posted 22 May 2014 by Claggy Post: I've seen the same threads from years and years ago and it looks like BOINC just doesn't care. What version Boinc? What OS? What project? What applications? what type of host? Does Boinc run the correct number of applications, But there is some load on different cores? That is an OS function, it schedules which core different threads of an application runs on, Please supply some more info: When requesting help on these forums. Claggy |
252)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 54197)
Posted 20 May 2014 by Claggy Post: One moment I saw the down for maintenance message, the next moment I can't even reach seti. Edit: Scratch that, restarting one of my access points fixed that. Claggy |
253)
Message boards :
Android :
app keep timing without really crunching
(Message 54184)
Posted 19 May 2014 by Claggy Post: Hi It's a Seti problem, but very device specific, some devices are fine, other devices either error their tasks or stall, reason is undetermined at the moment, the way to check if the app has stalled is to either use CPU-Z to check for CPU load, or check Boinc's log, and check that the task has checkpointed recently, ie within a minute, if it hasn't checkpointed within 5 minutes or so, then suspend Boinc, then resume, that'll get the app to exit memory, and resume. What is the mobile? Claggy |
254)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54158)
Posted 18 May 2014 by Claggy Post: Interesting. The upgrade to kernel 3.12.19+ did nothing for me, it's still hanging. Keen to see how your upgrade affects things! I updated to another 3.12.19+ release later on Friday, that didn't help. Claggy |
255)
Message boards :
Questions and problems :
EVENT LOG Message ... Not requesting tasks: don't need
(Message 54155)
Posted 18 May 2014 by Claggy Post: I am frequently getting the message ... If you're getting that then your cache is full. I have my Preferences Set to maximum for the Number of Days. And what value is that? Setting it to the maximum is counter productive as many projects have deadlines less than that and you'll end up not getting work because it can't be completed in time, And where have you set that? On a project website's computing preferences page, or locally in Boinc Manager? Please restart Boinc, then post the Boinc startup from the Event log, the first 30 lines or so will do, then can you supply a set of logs with work_fetch_debug enabled. Claggy |
256)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54094)
Posted 13 May 2014 by Claggy Post: $ sudo rpi-update sudo apt-get install rpi-update will install it. Claggy |
257)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54087)
Posted 12 May 2014 by Claggy Post: When I logon into the Pi it says: To update the kernel, modules, sdk etc you do a sudo rpi-update && sudo reboot (assuming you have rpi-update installed), that will update the kernel, modules, sdk, etc, make sure you back your SDCard up before hand, and to not contact any projects between updating and restoring backup, as that will abandon any work received. (scheduler contact seq will no longer line up, the workaround is to edit the client_state.xml and increase the <rpc_seqno> value to one or two above what the project server reports) Claggy |
258)
Message boards :
BOINC client :
Raspberry Pi client causing kernel error and freeze
(Message 54050)
Posted 10 May 2014 by Claggy Post: I have the same problem on my Pi running Raspbian Jessie and the 3.12.x kernel, the 3.10.x kernel had no problem: http://www.raspberrypi.org/forums/viewtopic.php?p=547713#p547713 Claggy |
259)
Message boards :
Questions and problems :
PC turned on and unused for 36 hours - 2 hours actual work done
(Message 53928)
Posted 2 May 2014 by Claggy Post: Windows power settings, probably went to sleep, I forget the default timeout (first thing I do is disable it). Control Panel>System and Security>Power Options. Claggy |
260)
Message boards :
Questions and problems :
Linux and ATI GPUs
(Message 53918)
Posted 2 May 2014 by Claggy Post: http://boinc.thesonntags.com/collatz/hosts_user.phpThat url shows the hosts of the user looking at the link, in my case it shows my hosts at Collatz. This is a better link just to show just my hosts: http://boinc.thesonntags.com/collatz/hosts_user.php?userid=2223 and this is a better link to show just your hosts: http://boinc.thesonntags.com/collatz/hosts_user.php?userid=47042 Claggy |
261)
Message boards :
Questions and problems :
Linux and ATI GPUs
(Message 53894)
Posted 1 May 2014 by Claggy Post: Which Distro? There are dozens of them, Ubuntu, Debian, etc, Where did you get Boinc from? Berkeley? or from that Distro's repository? Does that distro have an AMD package for Boinc? Claggy |
262)
Message boards :
Questions and problems :
Setting Processor Usage Times
(Message 53852)
Posted 30 Apr 2014 by Claggy Post: You could set the Activity menu to 'Run always' for when you're offduty. Claggy |
263)
Message boards :
Questions and problems :
No progress in tasks
(Message 53738)
Posted 21 Apr 2014 by Claggy Post: Sounds more like a project application problem, rather than a Boinc problem, best take it up there. I had a look at voerdus at Einstein, but his computers are hidden, and hence his completed tasks are hidden, so no application evidence. Claggy |
264)
Message boards :
Questions and problems :
No progress in tasks
(Message 53736)
Posted 21 Apr 2014 by Claggy Post: Not all project apps report progress constantly, Seti AP OpenCL apps only show progress every 0.9%, some of Einstein apps are like that, But have a lot larger increments, they may only report 0%, but are actually somewhat further on and will eventually show progress, Boinc 7.2.38 also introduced a feature where if an app doesn't report any progress done, it'll estimate it instead, that may mean Boinc starts displaying progress, then the app starts reporting progress, Boinc will then switch to it's progress reports (backwards normally) Claggy |
265)
Message boards :
Questions and problems :
gpu disappeared after upgrading to nvidia driver release 335.23
(Message 53726)
Posted 19 Apr 2014 by Claggy Post: Make sure your reboot your host, there have been reports that this is required now, Claggy |
266)
Message boards :
BOINC client :
Make BOINC reconfigure for new GPU
(Message 53644)
Posted 15 Apr 2014 by Claggy Post: 4/14/2014 8:48:43 AM | | CUDA: NVIDIA GPU 0: Quadro FX 1700 (driver version 307.45, CUDA version 5.0, compute capability 1.1, 512MB, 405MB available, 88 GFLOPS peak) Knowing the the FX 3500 isn't Cuda compatible now, the next question is why Boinc displays the Quadro FX 1700 OpenCL device twice, because two monitors are connected to it?, I do remember someone with a HD5700 showing this once here too. Claggy |
267)
Message boards :
Questions and problems :
BOINC Manager 7.2.7 (x64) not working after Ubuntu 13.10 upgrade from 13.04
(Message 53641)
Posted 15 Apr 2014 by Claggy Post: - Did you really mean 7.2.7, or did you mean 7.2.27, or even something else? For Ubuntu and Debian, the repositories have various Boinc versions, I understand the version gets frozen to a version at some point, afterwards there may be an Update version, and maybe a backport, For Saucy Salamander it is frozen at Boinc 7.2.7, for Trusty Tahr it is 7.2.42: “boinc” package in Ubuntu I suggest that he just upgrades his package to the current package for his current OS, if there is a newer version available. Claggy |
268)
Message boards :
Android :
Android Problems
(Message 53614)
Posted 13 Apr 2014 by Claggy Post: I found it sometimes takes a few attempts before it works, try a few more times, making sure you don't make any typos. Claggy |
269)
Message boards :
BOINC client :
Make BOINC reconfigure for new GPU
(Message 53599)
Posted 11 Apr 2014 by Claggy Post: Yes. There are three monitors total. On card has two, the other has one. Can you post the Boinc startup from the Event log please (the first 30 lines will do), it would be helpful knowing which version of Boinc you are running, and which OS (I'm assuming a Windows OS, (Rather than Linux, or OS X), But which one), another read of When requesting help on these forums. would be helpful too. Claggy |
270)
Message boards :
Questions and problems :
Going to run a raspberry pi. What do I need to know?
(Message 53598)
Posted 11 Apr 2014 by Claggy Post: If you're going to run Raspbian Wheezy, you can get the repository Boinc (7.0.27) by going apt-get install boinc-client boinc-manager To run Einstein, just attach to it as you would any other project. To run Seti, you'll need to get hold of the Daniel Carrion seti v7 app as there isn't a v7 Seti app for Wheezy in the repository: http://burdeview.blogspot.co.uk/p/raspberry-pi-boinc-project-ive-created.html Claggy |
271)
Message boards :
BOINC client :
Make BOINC reconfigure for new GPU
(Message 53595)
Posted 11 Apr 2014 by Claggy Post: 4/11/2014 2:36:51 PM | | CUDA: NVIDIA GPU 0: Quadro FX 1700 (driver version 307.45, CUDA version 5.0, compute capability 1.1, 512MB, 303MB available, 88 GFLOPS peak) Do you have a monitor connected to the Quadro FX 3500, or have the desktop extended onto it? Claggy |
272)
Message boards :
Questions and problems :
Scheduling
(Message 53506)
Posted 3 Apr 2014 by Claggy Post: One thing I forgot earlier, if I tell PG to update the log shows ... There is no such thing as a PG Buffer, The Computing preferences is a Global preference, ie, it applies to all projects together, not each project separately, Say you have your cache settings set to 2 + 0 days, If the total guestimate for how long all your remaining work is greater than two days then your cache is full, Boinc won't ask for work from any project because it doesn't need it, once it does need it it'll then ask for work from the project(s) with the highest priority. Claggy |
273)
Message boards :
Questions and problems :
Scheduling
(Message 53501)
Posted 3 Apr 2014 by Claggy Post: Basically with that CPDN Wu, your cache is full, Boinc won't ask for work again until it needs it, or is far enough though it that it feels that another project deserves some time. Claggy |
274)
Message boards :
Questions and problems :
Ubuntu 12.0.4.4 and latest BoinC for Linux
(Message 53493)
Posted 2 Apr 2014 by Claggy Post: You can get newer BOINC versions for older Ubuntus from LocutusOfBorg's PPA. That is actually called 'boinc development release', although it is on the present Berkeley Recommended Release. The actual LocutusOfBorg's PPA is this url: https://launchpad.net/~costamagnagianfranco/+archive/locutusofborg-ppa, It is presently on Boinc 7.2.33 Claggy |
275)
Message boards :
Questions and problems :
Suggested (CPU) preferences for BOINC
(Message 53431)
Posted 30 Mar 2014 by Claggy Post: 3/30/2014 2:53:32 PM | Einstein@Home | General prefs: from Einstein@Home (last modified 24-Mar-2014 17:42:06) How many actual CPU tasks are running? It should be a maximum of four, But, after that it is up to the OS which cores different portions of the app runs on. On my i7-2600K, when I run four CPU Seti tasks is see some load on all the cores, usability doesn't suffer through, perhaps in your case it the amount of memory the CPDN tasks use, you could use an app_config.xml to limit the amount of CPDN Wu's that are allowed to run at once: Application configuration Claggy |
276)
Message boards :
BOINC client :
Newb Guide for Compiling?
(Message 53423)
Posted 30 Mar 2014 by Claggy Post: All the steps are on the Software Development page: Get source code Compiling BOINC client software Claggy |
277)
Message boards :
Questions and problems :
Suggested (CPU) preferences for BOINC
(Message 53422)
Posted 30 Mar 2014 by Claggy Post: I have an Intel based machine with Nvidia 630 graphics card details below. Local computing preferences override Web Computing preferences, try going into Boinc Manager's Tools>Computing preferences page, then hit the Clear Button in the top right, then Yes. Posting the Boinc startup from the Event log (the first 30 lines or so) is a lot more useful than posting all your hardware info, Claggy |
278)
Message boards :
BOINC client :
Allow user to request the resend of lost work units
(Message 53414)
Posted 29 Mar 2014 by Claggy Post: There is/was code in place where a double reporting of a result causes 'resent lost tasks' to be activated for that scheduler contact, Jason G did a Boinc 6.10.58 clent where that ability was exploited at Seti, this goes back a year or two when they were still on the bandwidth limited hurricane link, DA turned off 'resent lost tasks' thinking it would improve database load, but it made it worse because clients were loosing hundreds of tasks, DA produced this half way house to try and keep lost tasks in check, i think it was a partial success, Claggy |
279)
Message boards :
GPUs :
Clarification on BOINC and AMD gpu
(Message 53407)
Posted 29 Mar 2014 by Claggy Post: Brilliant. Claggy |
280)
Message boards :
GPUs :
Clarification on BOINC and AMD gpu
(Message 53405)
Posted 29 Mar 2014 by Claggy Post: sab 29 mar 2014 13:32:01 CET | | CAL: ATI GPU 0: AMD Radeon HD 6570/6670/7570/7670 series (Turks) (CAL version 1.4.1848, 2048MB, 1862MB available, 1152 GFLOPS peak) Boinc is only reporting CAL support for your GPU, OpenCL support is required for Seti OpenCL apps, they don't have CAL only apps. Setiathome applications You'll need to install an AMD OpenCL package. Claggy |
281)
Message boards :
Questions and problems :
32-bit install for Ubuntu?
(Message 53392)
Posted 28 Mar 2014 by Claggy Post: 32bit Linux programs are eithier labelled as Linux x86, or x32, 64bit Linux programs as x64: http://boinc.berkeley.edu/download_all.php Claggy |
282)
Message boards :
Questions and problems :
Tasks all enter state: uploading suspended user request
(Message 53383)
Posted 28 Mar 2014 by Claggy Post: All my tasks, as they complete, enter the state "Uploading (suspended - user request)" and get stuck there. The project is in the state "Scheduler request pending, Requested by user". That is the 'Computing' Activity selector, your tasks compute O.K, the problem is your tasks aren't being allowed to upload, and Boinc isn't allowed to do scheduler contacts, So, what happens if you set 'Network activity always available'? or Network activity based on preferences? Instead of Network activity suspended? Claggy |
283)
Message boards :
Questions and problems :
7.2.42 has my RAC in freefall
(Message 53378)
Posted 27 Mar 2014 by Claggy Post: Since I installed my BOINC 7.2.42 my RAC has dropped by 4k and still dropping. Is this a function of BOINC 7.2.42 or is it a system wide thing with everyone's RAC going down? I'm running only Eintein@home. When requesting help on these forums. Claggy |
284)
Message boards :
Questions and problems :
Memory usage overload
(Message 53344)
Posted 27 Mar 2014 by Claggy Post: New problem now: (((<ams_password_error>0</ams_password_error>))) I don't understand what you're getting at there, What is Boinc doing or not doing? Having the <gui_rpc_debug>1</gui_rpc_debug> logging flag set is giving those messages, change the 1 to a 0 to get rid of them, As you see from the log from my host <ams_password_error>0</ams_password_error> is a perfectly normal response: 27/03/2014 10:43:05 | | [gui_rpc] GUI RPC Command = '<boinc_gui_rpc_request><get_cc_status/></boinc_gui_rpc_request>' 27/03/2014 10:43:05 | | [gui_rpc] GUI RPC reply: '<boinc_gui_rpc_reply><cc_status> <network_status>2</network_status> <ams_password_error>0</ams_password_error> <task_s' 27/03/2014 10:43:06 | | [gui_rpc] GUI RPC Command = '<boinc_gui_rpc_request><get_messages> <seqno>35343</seqno> <translatable/></get_messages></boinc_gui_rpc_request>' 27/03/2014 10:43:06 | | [gui_rpc] GUI RPC reply: '<boinc_gui_rpc_reply><msgs><msg> <project></project> <pri>1</pri> <seqno>35344</seqno> <body>[gui_rpc] GUI RPC reply: '<b' 27/03/2014 10:43:06 | | [gui_rpc] GUI RPC Command = '<boinc_gui_rpc_request><get_results><active_only>1</active_only></get_results></boinc_gui_rpc_request>' 27/03/2014 10:43:06 | | [gui_rpc] GUI RPC reply: '<boinc_gui_rpc_reply><results><result> <name>sample_3100816_0</name> <wu_name>sample_3100816</wu_name> <version_nu' Claggy |
285)
Message boards :
Projects :
Orbit@Home Revival Imminent?
(Message 53338)
Posted 26 Mar 2014 by Claggy Post: Have you heard anything about when that might be? Some time this century I expect, unless the founder becomes immortal, then the next millennium is a possibility, ;-) Claggy |
286)
Message boards :
Questions and problems :
Memory usage overload
(Message 53334)
Posted 26 Mar 2014 by Claggy Post: Is it Boinc that is using 100% memory? If so Boinc maybe has a memory leak, Or is it the science applications that use 100% memory, (Boinc doesn't do computations), then maybe either you're running a host with too little memory for the science application you're running, or they have a memory leak, which brings us to: When requesting help on these forums. Claggy |
287)
Message boards :
Questions and problems :
Having issues with GPU tasks
(Message 53310)
Posted 25 Mar 2014 by Claggy Post: You are best asking that on the setiathome project forums, either Q&A or Number Crunching, then we can see what hosts you have, and what errors the applications produce. Claggy |
288)
Message boards :
BOINC Manager :
My BOINC MANAGER VERSION 7.0.64(X86) ISN'T DOING ANY WORK.
(Message 53309)
Posted 25 Mar 2014 by Claggy Post: Boinc Manager doesn't do any work, Boinc Manager is the GUI, the Graphical User Interface for the Boinc client, and even then the Boinc client doesn't do any work either, it manages what project applications do, project applications are what do the work. If you're got problems with project applications, take the problem up with the project concerned. I you're having problems with project applications from multiple projects, then yes post about it here, But go and read this thread and post the required information: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600 Claggy |
289)
Message boards :
News :
BOINC 7.2.42 released to the public
(Message 53168)
Posted 14 Mar 2014 by Claggy Post: upgraded to this from 7.2.33 and the flashing screensaver still persists, the same as 7.2.39, I'm going back to 7.2.33 again until you get this fixed. :( Which part of the following didn't you understand?: For the next person who thinks 7.2.42 has a fix for the screen saver problem, or that any next version will do so and it's not mentioned in the release thread, please always read the release notes. Claggy |
290)
Message boards :
GPUs :
ATI GPU keeps resetting
(Message 53066)
Posted 9 Mar 2014 by Claggy Post: The answer is the same as in this thread, the driver is too new, the Brook+ Hybrid Astropulse app will work fine on older drivers: http://boinc.berkeley.edu/dev/forum_thread.php?id=8992&postid=53058 Claggy |
291)
Message boards :
Projects :
Using HD4000 alongside dedicated GPU: Possible to use it exclusively for a project?
(Message 53045)
Posted 7 Mar 2014 by Claggy Post: Not sure what in particular you need from the event log, so here's everything: http://pastebin.com/nBaBwuu0 That didn't include the Boinc startup, so it was a waste, it would have told me your OS, your Boinc version, what GPUs you were running, if you had Intel GPU drivers installed, it would have displayed Intel OpenCL support for the CPU, it would have told me your host id's at a few projects, and from that I might be able to see from an application's output whether it detected any other OpenCL devices, that Boinc somehow missed. Here's a timely reminder, again, for what info we're asking for: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600#50407 Anyway the answer is simple, An IvyBridge CPU is the minimum requirement, SandyBridge CPUs don't have an OpenCL capable GPU: http://www.intel.com/support/graphics/sb/CS-033757.htm?wapkw=opencl You can paste the startup here, for instance here's my i7-2600K startup, note there is no Intel OpenCL capable GPU here either: 07/03/2014 17:07:05 | | Starting BOINC client version 7.2.42 for windows_x86_64 07/03/2014 17:07:05 | | log flags: file_xfer, sched_ops, task, coproc_debug, cpu_sched, dcf_debug 07/03/2014 17:07:05 | | log flags: sched_op_debug 07/03/2014 17:07:05 | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6 07/03/2014 17:07:05 | | Data directory: C:\ProgramData\BOINC 07/03/2014 17:07:05 | | Running under account Claggy 07/03/2014 17:07:05 | | CAL: ATI GPU 0: AMD Radeon HD 7700 series (Capeverde) (CAL version 1.4.1848, 1024MB, 984MB available, 3584 GFLOPS peak) 07/03/2014 17:07:05 | | OpenCL: AMD/ATI GPU 0: AMD Radeon HD 7700 series (Capeverde) (driver version 1348.5 (VM), device version OpenCL 1.2 AMD-APP (1348.5), 1024MB, 984MB available, 3584 GFLOPS peak) 07/03/2014 17:07:05 | | OpenCL CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (OpenCL driver vendor: Advanced Micro Devices, Inc., driver version 1348.5 (sse2,avx), device version OpenCL 1.2 AMD-APP (1348.5)) 07/03/2014 17:07:05 | | No NVIDIA library found 07/03/2014 17:07:05 | SETI@home | Found app_info.xml; using anonymous platform 07/03/2014 17:07:05 | | Host name: P8Z68-V-Pro 07/03/2014 17:07:05 | | Processor: 8 GenuineIntel Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz [Family 6 Model 42 Stepping 7] 07/03/2014 17:07:05 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes syscall nx lm vmx tm2 pbe 07/03/2014 17:07:05 | | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00) 07/03/2014 17:07:05 | | Memory: 7.98 GB physical, 15.95 GB virtual 07/03/2014 17:07:05 | | Disk: 1.82 TB total, 1.52 TB free 07/03/2014 17:07:05 | | Local time is UTC +0 hours 07/03/2014 17:07:05 | | Config: use all coprocessors 07/03/2014 17:07:05 | | Config: GUI RPCs allowed from: 07/03/2014 17:07:05 | Albert@Home | URL http://albert.phys.uwm.edu/; Computer ID 8143; resource share 100 07/03/2014 17:07:05 | Collatz Conjecture | URL http://boinc.thesonntags.com/collatz/; Computer ID 20542; resource share 10 07/03/2014 17:07:05 | climateprediction.net | URL http://climateprediction.net/; Computer ID 1065924; resource share 20 07/03/2014 17:07:05 | Einstein@Home | URL http://einstein.phys.uwm.edu/; Computer ID 2542754; resource share 20 07/03/2014 17:07:05 | LHC@home 1.0 | URL http://lhcathomeclassic.cern.ch/sixtrack/; Computer ID 9967306; resource share 10 07/03/2014 17:07:05 | orbit@home | URL http://orbit.psi.edu/oah/; Computer ID 73849; resource share 10 07/03/2014 17:07:05 | Radioactive@Home | URL http://radioactiveathome.org/boinc/; Computer ID 5875; resource share 100 07/03/2014 17:07:05 | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 5427475; resource share 100 07/03/2014 17:07:05 | SETI@home Beta Test | URL http://setiweb.ssl.berkeley.edu/beta/; Computer ID 45274; resource share 100 07/03/2014 17:07:05 | PrimeGrid | URL http://www.primegrid.com/; Computer ID 224144; resource share 30 07/03/2014 17:07:05 | SETI@home | General prefs: from SETI@home (last modified 30-Dec-2013 00:28:55) 07/03/2014 17:07:05 | SETI@home | Computer location: work 07/03/2014 17:07:05 | | General prefs: using separate prefs for work 07/03/2014 17:07:05 | | Reading preferences override file 07/03/2014 17:07:05 | | Preferences: 07/03/2014 17:07:05 | | max memory usage when active: 6126.45MB 07/03/2014 17:07:05 | | max memory usage when idle: 7351.74MB 07/03/2014 17:07:05 | | max disk usage: 100.00GB 07/03/2014 17:07:05 | | max CPUs used: 4 07/03/2014 17:07:05 | | (to change preferences, visit a project web site or select Preferences in the Manager) 07/03/2014 17:07:05 | | Using proxy info from GUI 07/03/2014 17:07:05 | | Not using a proxy Claggy |
292)
Message boards :
Projects :
Using HD4000 alongside dedicated GPU: Possible to use it exclusively for a project?
(Message 53042)
Posted 7 Mar 2014 by Claggy Post: Nothing happens when I click the detect button. I have three monitors all connected to my video card, but my motherboard does not have a display port of any kind on it. What is your CPU? Can you post the Boinc startup from the Event Log please. Claggy |
293)
Message boards :
Projects :
Using HD4000 alongside dedicated GPU: Possible to use it exclusively for a project?
(Message 53040)
Posted 7 Mar 2014 by Claggy Post: The solution is to extend the desktop onto the HD4000 (you can try a monitor or a dummy plug, but some have said that is not always 100% reliable), To extend the desktop (assuming Win 7), right click on the desktop, choose 'screen resolution', on the 'screen resolution'/'change the appearance of your display' screen hit the 'Detect' button, now click on each of the not detected displays until you get to the HD4000, now set the 'multiple displays' selection to 'try and connect anyway on: VGA', click apply, now on 'multiple displays' select 'extend these displays', then restart Boinc. To stop Boinc asking for work for the Nvidia GPU at Collatz go into the Collatz project preferences and Deselect 'Use Nvidia GPU', do a project update (with NNT already set), after that Boinc won't ask for Nvidia work. (you have four different venues available to use, so you can tailor different sets of preferences to different hosts) Claggy |
294)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 53007)
Posted 6 Mar 2014 by Claggy Post: svn is still up through. Claggy |
295)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 52999)
Posted 6 Mar 2014 by Claggy Post: Gone quiet, can't reach the forums, or make scheduler contact. Claggy |
296)
Message boards :
Questions and problems :
Boinc stuck on updating
(Message 52974)
Posted 5 Mar 2014 by Claggy Post: Try to use BOINC 7.2.41 first, as that's the new recommended. Boinc 7.2.42 is the new recommended, Boinc 7.2.41 was Android only (althrough I did build 7.2.41 for Linux x64 and armv6l-unknown-linux-gnueabihf) Claggy |
297)
Message boards :
Questions and problems :
BOINC 7.2.42 scheduling issue
(Message 52973)
Posted 5 Mar 2014 by Claggy Post: Now, if you still won't do so, all you do here is rant. You have no proof, it's just your word that we have to believe. Screen shots don't say much in this. Debug output does. +1 Claggy |
298)
Message boards :
Questions and problems :
Onavi sensor not found Raspberri Pi
(Message 52953)
Posted 4 Mar 2014 by Claggy Post: What's this to do with Boinc itself? Boinc detects details of a system, it's OS, CPU, RAM, GPUs, etc, what it doesn't do is detect a million and one peripheral devices, If there is a project that uses the O-navi, you'll need to take it up with them why their app doesn't detect the sensor. Claggy |
299)
Message boards :
Questions and problems :
Bonic 7.2.42 - Unable to download
(Message 52900)
Posted 1 Mar 2014 by Claggy Post: I've reported it. Claggy |
300)
Message boards :
Projects :
Trying to get my old user account back
(Message 52889)
Posted 1 Mar 2014 by Claggy Post: Detach/Remove project, then attach/add project using the email and password from your original account. If you're forgotten your email address, or password, either log out of your account on your browser, or choose a different browser, and try and log in by going to your account page, now either reset your password if you have access to that email account, or log in with your authenticator, although you may have lost that in creating a new account, Claggy |
301)
Message boards :
Questions and problems :
Nvidia SLI problems
(Message 52887)
Posted 1 Mar 2014 by Claggy Post: The Event Log can be open by pressing Ctrl+Shift+E, or you can find it by clicking Advanced in Boinc Manager's Advanced view, you can then select the messages you want to post (scroll up, or restart Boinc), then hit the 'Copy Selected' button at the bottom. Claggy |
302)
Message boards :
Questions and problems :
Nvidia SLI problems
(Message 52866)
Posted 28 Feb 2014 by Claggy Post: No, not exactly. Posting the Boinc startup from the Event Log is worth it's weight in gold, then we can see what Boinc detects, and we get to see the host id's and we can see if it's completed any work O.K at your projects. Claggy |
303)
Message boards :
Questions and problems :
Multiple NVidia Cards
(Message 52865)
Posted 28 Feb 2014 by Claggy Post: I have 3 video cards in my machine yet only two of them are showing up with tasks running. Is there anything I can do to make it utilize all my GPU's? How many GPUs does Boinc detect? You may need to extend your desktop onto one of them to get Boinc to detect it. Claggy |
304)
Message boards :
Projects :
how to avoid opengl in collatz
(Message 52819)
Posted 27 Feb 2014 by Claggy Post: I haven't tested to verify, but under BOINC's advanced view you could click on Activity and then choose Suspend GPU. That doesn't stop the work fetch for the GPUs, he'd end up with a full cache of GPU wu's that never gets crunched, Boinc would abort them when they got to deadline, and fill up with more, The project administrators and users wouldn't be fans of him having to wait until the deadline until someone else crunches those Wu's. Claggy |
305)
Message boards :
Questions and problems :
Not getting new seti@home work units after updates and upgrades
(Message 52810)
Posted 27 Feb 2014 by Claggy Post: I apologize for the length, but trying to give you the requested information. You're upgraded to a driver where the is no CAL support for Bonaire GPUs, there are other Bonaire hosts out there with the same problem at Setiathome, I suppose i could badger Eric to remove the CAL driver requirements for the OpenCL apps as the Setiathome ATI OpenCL apps work fine without CAL support being there, In the meantime you could download the Lunatics installer, and install the Optimised apps, having the apps installed as anonymous platform bypasses the CAL requirement, and you'd get faster CPU apps as well, Claggy |
306)
Message boards :
Projects :
how to avoid opengl in collatz
(Message 52803)
Posted 26 Feb 2014 by Claggy Post: Thanks guys, the machine runs xubuntu 13.10 so I can't install it as a service, and the other machines can manage gpu without any issue so if I change preference in the project preferences they'll have effect on all the machines. You have four different locations/venues available to you, ie default, home, school and work, so you can set four different sets of preferences, I'm sure you can allocate your hosts around the venues so you can deselect Use Intel GPU on one of the venues, or doesn't BAM allow that? Otherwise just put <ignore_intel_dev>0</ignore_intel_dev> or <no_gpus>1</no_gpus> in your cc_config.xml Claggy |
307)
Message boards :
Android :
Android issues
(Message 52790)
Posted 26 Feb 2014 by Claggy Post: Don't worry about the 'don't use GPU while active' and the 'don't compute while active' messages, my HTC One S says that too, But none of my computing preferences location/venues are set like that, I think that is hardwired in: Wed Feb 26 00:29:58 GMT 2014||don't use GPU while active Wed Feb 26 00:29:58 GMT 2014||don't compute while active using the 'Pause computation when screen is active' button does give a computation suspending message because I'm using the screen: Wed Feb 26 00:42:19 GMT 2014||Suspending network activity - computer is in use Wed Feb 26 00:42:19 GMT 2014||Suspending computation - computer is in use Your messages relate to the Boinc GUI not being active, and suspending network activity (and probably computation, they are linked together), does computation continue O.K if you keep the GUI open? - check the seconds are counting up O.K, and don't reset back to an earlier time, repeatable. (I reported a Bug with the latest Boinc 7.3.4/.5 and Albert at homes apps where this happens) I understand if the Boinc GUI isn't active then computation will suspend, if you leave the GUI and open another app, it doesn't mean the GUI is removed from memory, it could be a while before Android removes it from memory, and cause suspension, I'm leaving the GUI closed over-night to see if I can replicate it. Claggy |
308)
Message boards :
Android :
Android issues
(Message 52789)
Posted 26 Feb 2014 by Claggy Post: And what, pray the devil, are GUI messages? Set the verbosity to 5, then look at the tab to the right of the Client messages. (It's blank at verbosity level 2) Claggy |
309)
Message boards :
Android :
Android issues
(Message 52782)
Posted 25 Feb 2014 by Claggy Post: As for the log showing anything, that depends on what level of logging you allow for the Event Log. I suppose when it's set to level 0 or 1, there's not much showing. The level of verbosity is for the GUI messages only, and not the client messages. Claggy |
310)
Message boards :
Android :
Android issues
(Message 52781)
Posted 25 Feb 2014 by Claggy Post: I'm running Einstein... Based on the picture, the Boinc Icon in the top left corner shows Boinc as being suspended, and at the Bottom it says 'Connect your device to a charger to continue computing' as to why it's not computing. If you connect your charger it'll probably then say 'Turn your screen off to continue computing', so either do that, or go into the preferences and allow computation when screen is active, and if you want it to do (or not do) computation on the Wall socket/USB Connection/Wireless Charger/Battery go into the 'Power sources for computation' page and select or deselect as required. Claggy |
311)
Message boards :
Questions and problems :
seti@home v7 not installed
(Message 52729)
Posted 23 Feb 2014 by Claggy Post: No problem for me, I can live with it. Perhaps message will change when SETI servers are sending out work in a normal manner. At this time no work is being sent out either Astropulse or Multibeam. Setienhanced was Seti v5, (Setienhanced) Multibeam was Seti v6, that is deprecated, there is no work for Seti v6, and there won't be again, Seti v7 has replace Seti v6, there is plenty of work for Seti v7, but you don't have Seti v7 in your app_info, either CPU and/or GPU so you won't be able to get it, you did have it in your app_info, but the last work you received for it was on the 1st Feb: All SETI@home v7 tasks for computer 7122790 For proof that work is going out check the Cricket Graph, just because the results ready to send reads close to Zero (on the Server Status page) doesn't mean work isn't going out: Graphs for gigabitethernet6_17 You might want to re-evaluate your decision to only have Astropulse v6 in your app_info, if you have the Seti v7 apps in to, then that message will go away, you can always use the setiathome preferences to only get Astropulse v6 when it is available, at other times you might want to do Seti v7 work otherwise your computer will likely be dry. Claggy |
312)
Message boards :
News :
HTC/BOINC partnership
(Message 52627)
Posted 18 Feb 2014 by Claggy Post: Since 2012, BOINC has been working with HTC - one of the world's leading smartphone manufacturers - to bring volunteer computing to Android devices. On February 24th we'll release an exciting result of this partnership - stay tuned! It's a shame that while Boinc works fine on my HTC One S, finding project applications that work on it reliably is proving very difficult: http://asteroidsathome.net/boinc/results.php?hostid=63394 http://www.primegrid.com/results.php?hostid=417716 http://setiweb.ssl.berkeley.edu/beta/results.php?hostid=69176 The only bright points is Albertathome's latest NEON app now does validate, rather than produce validate errors: https://albert.phys.uwm.edu/results.php?hostid=9756 Claggy |
313)
Message boards :
Questions and problems :
No file found
(Message 52625)
Posted 18 Feb 2014 by Claggy Post: That is more of a Windows problem, not a Boinc problem: Note: These errors occur because Windows has lost its internal path to the correct BOINC.MSI installer file. It's really a Windows problem, not so much a BOINC problem. No need to complain that BOINC needs to fix this, as BOINC cannot fix problems that are made by Windows! FAQ: Windows Installer Error 1706: Setup cannot find the required files / 1714: older version cannot be removed / BOINC.msi cannot be found / The feature you are trying to use is on a network resource that is unavailable / Error 1325. is not a valid short name Don't ever post your email address to forum's as it'll be picked up every bot under the sun, and you'll just get loads of SPAM. Claggy |
314)
Message boards :
Questions and problems :
OVERHEATING,CPU & GPU SPEEDS IN REALTIME ON INTEL MACHINES
(Message 52547)
Posted 14 Feb 2014 by Claggy Post: Sweet tool but no OS version? From the front page: SIV is designed for Windows 8.1, 8.0, 7, Vista, XP, 2012, 2008, 2003, 2000 and NT4. Windows 95, 98 and Me are also supported. Claggy |
315)
Message boards :
BOINC client :
BOINC 7 development discussion thread.
(Message 52540)
Posted 14 Feb 2014 by Claggy Post: Where do I find version 7.3.2 to download? Normally in the changeset thread once the Alpha testers haven't found any Major Bugs. If you can't figure out the url for an alpha build from the url's posted for normal Boinc versions, then you're not suitable for doing Alpha testing (No offence ment) Claggy |
316)
Message boards :
Questions and problems :
OVERHEATING,CPU & GPU SPEEDS IN REALTIME ON INTEL MACHINES
(Message 52539)
Posted 14 Feb 2014 by Claggy Post: I use SIV to monitor CPU load, GPU load, and every imaginable parameter possible, and a lot other unimaginable parameters too: http://rh-software.com/ Claggy |
317)
Message boards :
Questions and problems :
New to BOINC
(Message 52524)
Posted 13 Feb 2014 by Claggy Post: Thank you for your response. I am using 7.2.39. & the cache settings are min work buffer .10 day & maximum is .25. Once I updated to that version it reported all tasks. Out of the 10 projects the following 5 have not received any work to do RNA world,drug discovery,climateathome,climate prediction &lhc home. Is there a reason for that? too many projects? buffer size? You won't get work from all your projects all the time, if the project with the highest priority for work gets work it'll likely fill your cache, no need to go and ask for work for the rest of your projects as the cache is already full, It will switch around in time. Claggy |
318)
Message boards :
Questions and problems :
New to BOINC
(Message 52511)
Posted 12 Feb 2014 by Claggy Post: You have made far too much projects active. This way there is a big chance your computer will never finish a work unit (wu) before expiration date. There is no problem with having a lot of projects as long as you don't run massive cache settings, Boinc will only get enough work to satisfy those settings, something like 1 + 0 should be suitable (assuming Boinc 7.x.x) if any work is likely to be late, then Boinc will switch to doing those tasks first (aka High Priority mode, this just means they are before other tasks, there is no priority change), if anyone is daft enough to try and run a 10 day cache with projects with deadlines with only a few days then of cause Boinc might run into problems, but that is a operator/project misconfiguration problem rather than a problem with Boinc. Claggy |
319)
Message boards :
Questions and problems :
New to BOINC
(Message 52509)
Posted 12 Feb 2014 by Claggy Post: What are your cache settings in number of days? (both settings), and which Boinc version? There are two cache settings measured in number of days, the first is the minimum amount, It also specifies how many days days of internet loss you're going to have, meaning any work has to be done that many days before deadline too, So a 5 day setting means you'll take 5 days to get around to the bottom of the cache, and you're got to report it 5 days early, not a problem for a project with a 30 day deadline, but it is with a project with a 3 day deadline, do the maths on that one, you're got to report the work before it's sent, the second setting is the maximum amount, Boinc 7 will first ask for the minimum plus maximum amount, then won't ask for work again until the amount of work in the cache drops below the minimum amount, so a very small should be used otherwise there will be a delay in reporting/asking for work. Claggy |
320)
Message boards :
GPUs :
MacPro Late 2013 AMD W9000 OpenCL 1.2
(Message 52504)
Posted 12 Feb 2014 by Claggy Post: Oh, i never though of that. You can't choose which GPU a particular task runs on, but you can go to each project website and deselect Use Nvidia GPU, Use AMD GPU or Use Intel GPU so Boinc doesn't ask for work for that particular GPU. Claggy |
321)
Message boards :
Questions and problems :
Android app continues to run on battery (no longer suspends)
(Message 52300)
Posted 3 Feb 2014 by Claggy Post: Go into the 'Power sources for computation' pop up box on the preferences tab, and untick 'Battery', then save. Claggy |
322)
Message boards :
Questions and problems :
1,000,000 WORK UNITS!!!!! now how do I sign on to Einstein?
(Message 52294)
Posted 2 Feb 2014 by Claggy Post: 2/2/2014 2:30:57 PM | SETI@home | Sending scheduler request: To fetch work. Two things, you're running Boinc 7.0.64, as you see it is trying to ask for work, but not ask for work, Boinc 7.2.33 should fix that. Are you trying to use Remote Desktop? That uses different drivers rendering the GPU unusable, try using tightVNC or TeamViewer instead, they allow GPU crunching when connected. Claggy |
323)
Message boards :
Questions and problems :
1,000,000 WORK UNITS!!!!! now how do I sign on to Einstein?
(Message 52292)
Posted 2 Feb 2014 by Claggy Post: It looks like einstein has blocked out my SETI. The SETI cpu units are showing "waiting to run" and the SETI GPU unit is saying "GPU missing". The work clock is running for none of them. The Einstein units are chugging along like champs, I think. You shouldn't get a GPU missing entry. Please post your Boinc startup from the Event Log, the first 30 lines or so should do. Claggy |
324)
Message boards :
GPUs :
MacPro Late 2013 AMD W9000 OpenCL 1.2
(Message 52261)
Posted 1 Feb 2014 by Claggy Post: Seti Beta has a OpenCL ATI GPU Astropulse app for the Mac, unfortunately after the initial feedback, there has been a total lack of feedback since, to the point that the release thread is locked. There is a Mac port of the Seti v7 x41zc Cuda app in Alpha testing, again the feedback is quite scarce, to the point that Eric is yet to add to Seti Beta (as a Stock app). Seti Beta applications Claggy |
325)
Message boards :
Questions and problems :
Incorrect "Total disk space" detection
(Message 52258)
Posted 1 Feb 2014 by Claggy Post: Output from terminal: That is an almost three year old Alpha version, as in a work in progress, the recommended version was around the Boinc 6.12.34/.35 area, why even use that recommended version when you could use Boinc 7.2.33 the latest recommended, there have been a huge amount of fixes since April 2011. Claggy |
326)
Message boards :
Projects :
News on Project Outages
(Message 52220)
Posted 29 Jan 2014 by Claggy Post: He's just posted an update -- not good news -- figure about 2 weeks before the server is rebuilt and online: The latest Collatz update: Collatz Status Claggy |
327)
Message boards :
Questions and problems :
No Usable GPU GTX 760
(Message 52178)
Posted 28 Jan 2014 by Claggy Post: Please provide your Boinc startup from the Event log, the first 30 or so lines will do. Claggy |
328)
Message boards :
GPUs :
ATI GPU R600 (R38xx) does not support OpenCL
(Message 52140)
Posted 25 Jan 2014 by Claggy Post: And please tell us what Catalyst driver you're got installed, if you're got one installed that is, and that you haven't got the driver from Windows update. Claggy |
329)
Message boards :
GPUs :
ATI GPU R600 (R38xx) does not support OpenCL
(Message 52138)
Posted 25 Jan 2014 by Claggy Post: HI, You don't need the AMD APP SDK, the Catalyst driver comes with an APP runtime. Claggy |
330)
Message boards :
GPUs :
ATI GPU R600 (R38xx) does not support OpenCL
(Message 52135)
Posted 25 Jan 2014 by Claggy Post: Hello !! It's not OpenCL support that is missing, But CAL support, i've seen two other hosts where CAL support was missing, but i think it was because their Bonaire GPUs didn't support CAL, while you get an error instead, one of them was successfully crunching Seti OpenCL ATI work via anonymous platform (the project server wouldn't send work for the Stock app probably because of a requirement for a CAL driver version), the other host was crunching Stock OpenCL ATI work at Einstein no problem. I suggest you try uninstalling the APP SDK, and the catalyst driver, and reinstall the latest Catalyst driver (you don't need to install the APP SDK for crunching) Claggy |
331)
Message boards :
Questions and problems :
Windows Server 2012R2 issues
(Message 51912)
Posted 5 Jan 2014 by Claggy Post: EDIT: Why is someone else's signature graphic in my post? Boincstats reordered their database sometime ago, you'll need to check what your lastest user number is, and change your sig. Claggy |
332)
Message boards :
Questions and problems :
Tasks staying suspended despite PC being idle
(Message 51903)
Posted 5 Jan 2014 by Claggy Post: Boinc on Linux has had idle detection problems in the past, supposedly fixed in later Boinc (on some distros), Boinc 7.0.27 is quite old now, The Recommended Boinc was 7.0.65 until recently, and now Boinc 7.2.33, Try and get one of those versions from your distro if possible, I looked through your preference files, they look right (I compared mine from Boinc 7.2.36), the only thing I noted is you have the 'Suspend work when non-BOINC CPU usage is above' set to 0% on the Web preferences, and set to 100% on your local preferences, I don't think this is the cause as you get different wording when Boinc suspends because of high CPU usage. Claggy |
333)
Message boards :
Questions and problems :
upgraded to Mavericks now Boinc is broken
(Message 51866)
Posted 3 Jan 2014 by Claggy Post: Try Uninstalling, then Reinstalling. Claggy |
334)
Message boards :
Questions and problems :
Why restarting too late tasks ?
(Message 51862)
Posted 3 Jan 2014 by Claggy Post: Those tasks were already started, so Boinc would have continued with them, any tasks not started will get aborted, and seemed have been, Boinc should have told you on startup that they were overdue (via the Event Log, and via a Notice), and that you should consider aborting them, did you take notice of that? 2013-12-11 15:14:24.0889 (4236) [normal]: Coarse grid sky:1/1 f1dot:2/14 f2dot:2/9 2013-12-11 15:16:48.2289 (4236) [normal]: Coarse grid sky:1/1 f1dot:2/14 f2dot:3/9 2013-12-11 15:19:12.5723 (4236) [normal]: Coarse grid sky:1/1 f1dot:2/14 f2dot:4/9 2013-12-11 15:21:36.8453 (4236) [normal]: Coarse grid sky:1/1 f1dot:2/14 f2dot:5/9 2014-01-02 14:25:10.4245 (2056) [normal]: This program is published under the GNU General Public License, version 2 2014-01-02 14:25:10.4245 (2056) [normal]: For details see http://einstein.phys.uwm.edu/license.php 2014-01-02 14:25:10.4245 (2056) [normal]: This Einstein@home App was built at: Jun 25 2013 15:11:53 Claggy |
335)
Message boards :
Questions and problems :
GPU problem on Mac OS X with 7.0.65
(Message 51860)
Posted 3 Jan 2014 by Claggy Post: Sadly replacing GPU is not an option for a MacBook Pro... Have you tried Boinc 7.2.33 yet, it has some changes relating to GPU detection, with Cuda use being re-enabled: client: optionally detect GPUs via a child process, for dual_GPU laptops. Claggy |
336)
Message boards :
Questions and problems :
Getting Runtime error
(Message 51856)
Posted 2 Jan 2014 by Claggy Post: Find out which project application it was from, and from which project, then report it either in their Number Crunching area, or their Platform-specific problems area on their forums. Claggy |
337)
Message boards :
Questions and problems :
Last version for OS X 10.3?
(Message 51853)
Posted 2 Jan 2014 by Claggy Post: Is there a download archive where I can find these versions Here: http://boinc.berkeley.edu/dl/ Claggy |
338)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 51840)
Posted 31 Dec 2013 by Claggy Post: It tis be Tuesday again, and Seti Beta is down for maintenance, no sign of the Main project going down, yet. Edit: the Main project is down for maintenance too now. Claggy |
339)
Message boards :
Questions and problems :
No screensaver since installing 7.2.33
(Message 51836)
Posted 30 Dec 2013 by Claggy Post: Check that the screensaver selected is 'Boinc' and not '(None)' or 'Blank' Claggy |
340)
Message boards :
Questions and problems :
Not working on my Mac at all
(Message 51818)
Posted 26 Dec 2013 by Claggy Post: Actually, having a re-look at the manager, the progress percentage has gone up. Is it just that it doesn't do the cool graphics that it used to do? Can I direct you to this thread again and supply some required information, without knowing what projects you're attached to we don't know if they even have a screensaver app. Claggy |
341)
Message boards :
Questions and problems :
Email addresses in a mess
(Message 51812)
Posted 24 Dec 2013 by Claggy Post: Each of your accounts at each of your projects should have the same email address, if you're got one project with a different email address just change the email address on the 'Your Account' web page for that project, If you have more than one account at the same project, you will not be able to merge these accounts, you'll just to have choose one or the other. Claggy |
342)
Message boards :
GPUs :
set_gpu_mode for one GPU of a dual GPU setup
(Message 51775)
Posted 18 Dec 2013 by Claggy Post: If you look in the wiki under Client configuration you have these options for ignoring GPUs: <ignore_ati_dev>N</ignore_ati_dev> There is also an option of Excluding GPUs from a particular project (maybe there is a project that doesn't cause lag): <exclude_gpu> While you are at it, you should upgrade Boinc to the Recommended version, presently 7.2.33, Boinc 7.2.7 was an Alpha release, there will be various elements in it that won't work correctly as the Bugs hadn't been found or fixed yet. Claggy |
343)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 51766)
Posted 17 Dec 2013 by Claggy Post: And we're back. +1 Claggy |
344)
Message boards :
Questions and problems :
Problem Upgrading to 7.2.33
(Message 51740)
Posted 16 Dec 2013 by Claggy Post: Have you tried running the Boinc Installer a 2nd time, and Select the 'Repair' option? Claggy |
345)
Message boards :
Questions and problems :
Feeder Not Running
(Message 51734)
Posted 15 Dec 2013 by Claggy Post: That's a server issue, not your BOINC client. You just have to wait until the project staff correct the issue. But since the rest of us can contact the server and get work without getting a message that the feeder isn't running, it is a client problem. @Jon Dunn, In Boinc Manager, if you go to the projects tab, select setiathome, then properties, what does the Master url say? It should be http://setiathome.berkeley.edu/ Claggy |
346)
Message boards :
Questions and problems :
How to clear Disk Sapce
(Message 51721)
Posted 14 Dec 2013 by Claggy Post: The other option is to increase the allocated space since disc space is cheap, you can do that by going to your computing preferences page of your favourite project, or by adjusting it in Boinc Manager. Claggy |
347)
Message boards :
Questions and problems :
Work fetch problem with more than 1 ATI GPU, app_info & exclusions
(Message 51720)
Posted 14 Dec 2013 by Claggy Post: Since I started using 7.2.33, I can't contact the server. I get the following: What's that to do with this thread? This thread is about a work fetch problem when using an app_info and GPU exclusions, I think it's also been fixed. You also should ask that at the project in question, this is the Boinc Message Boards, it isn't Seti. The answer is the feeder isn't running, so they can't supply work, since fixed. Claggy |
348)
Message boards :
Questions and problems :
Macs just for calculating
(Message 51681)
Posted 9 Dec 2013 by Claggy Post: by transferring files as JeromeC suggested, the only thing is to find which are the project files (calculated files) that need transferring! You need to move the whole Data directory to the 2nd Mac, uninstalling Boinc first, moving the Data directory, then installing Boinc on the 2nd Mac, then you can be sure the directory permissions are set correctly. Claggy |
349)
Message boards :
GPUs :
ATI and nVidia GPUs on the same BOINC cruncher
(Message 51659)
Posted 4 Dec 2013 by Claggy Post: It's not really a problem, you may need to extend the desktop onto the second GPU for it to be recognised through (if you haven't got a monitor connected), another tip, install the Nvidia drivers first, the AMD second, i did have validitity problems with one app once (Both drivers at the time installed different versions of OpenCL.dll): 04/12/2013 21:25:07 | | Starting BOINC client version 7.2.33 for windows_x86_64 Claggy |
350)
Message boards :
GPUs :
No usable GPUs found (GNU/Linux Debian Ubuntu 13.04 with Intel/ATI hybrid graphics)
(Message 51617)
Posted 1 Dec 2013 by Claggy Post: Intel doesn't supply OpenCL support for their GPUs under Linux: http://software.intel.com/en-us/articles/opencl-sdk-frequently-asked-questions/#14 Claggy |
351)
Message boards :
Questions and problems :
When boinc runs, it kills my graphics and fps till i restart.
(Message 51566)
Posted 26 Nov 2013 by Claggy Post: What version of Boinc? Can you pass by this thread and supply some needed information please. Claggy |
352)
Message boards :
Questions and problems :
reducing the heat
(Message 51510)
Posted 24 Nov 2013 by Claggy Post: other methods to reduce CPU temperature are to run less tasks, or run the tasks less of the time, ie at 50% of the time, In your computing preferences, set 'On multiprocessors, use at most 100% of the processors' to 50%, that will only run enough tasks to fill 50% of your cores. Claggy |
353)
Message boards :
Questions and problems :
reducing the heat
(Message 51502)
Posted 24 Nov 2013 by Claggy Post: The Best method for making a CPU run at a lower temperature is just to Buy a better CPU cooler, the ones that ship with them aren't normally very brilliant, other methods to reduce CPU temperature are to run less tasks, or run the tasks less of the time, ie at 50% of the time, Or you can change the CPU clock/multiplier values in the BIOS to reduce the clock. Claggy |
354)
Message boards :
Questions and problems :
Installed 7.2.28, now running tasks from 2011?
(Message 51476)
Posted 23 Nov 2013 by Claggy Post: You don't say which project this is on, this is the Boinc message Boards, it isn't a project, it doesn't give out tasks, please pass by this thread and give us the required information, then we may be able to help you. Claggy |
355)
Message boards :
BOINC Manager :
Manager doesn't suspend CPU tasks
(Message 51431)
Posted 21 Nov 2013 by Claggy Post: Same here, i have the Berkeley Boinc 7.2.28 running on Ubuntu 12.04 x64, suspending a task does suspend it, and on shutting down the Manager and client does cause the running tasks to exit. Claggy |
356)
Message boards :
BOINC Manager :
Manager doesn't suspend CPU tasks
(Message 51422)
Posted 21 Nov 2013 by Claggy Post: Which project? which apps? do they have the latest fixed api? What 'latest' are you talking about? latest recommended tag release, ie 7.2.28? the latest tag release, ie 7.2.30?, or from master? If it's from master, then expect it not to work, this is Alpha level, and maybe even pre-Alpha level. Since this Forum is mainly just for users, you're best to report it to the Boinc Alpha list, But have some manners, if you go around posting the following you won't get any help: BAD PROGRAMMING, FOLKS. FIX YOUR MESS and i'll also refer you to this thread, so you can supply some required info: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600 Claggy |
357)
Message boards :
Questions and problems :
Problems installing BOINC 7.2.28
(Message 51381)
Posted 20 Nov 2013 by Claggy Post: Have a read of this FAQ: Windows Installer Error 1706: Setup cannot find the required files / 1714: older version cannot be removed / BOINC.msi cannot be found / The feature you are trying to use is on a network resource that is unavailable / Error 1325. is not a valid short name Claggy |
358)
Message boards :
Questions and problems :
No usable GPUs found after installing 7.2.28
(Message 51379)
Posted 20 Nov 2013 by Claggy Post: Try uninstalling 331.82 and install 331.65 instead. Claggy |
359)
Message boards :
Questions and problems :
No usable GPUs found after installing 7.2.28
(Message 51369)
Posted 19 Nov 2013 by Claggy Post: 19/11/2013 21:19:56 | | Starting BOINC client version 7.2.28 for windows_x86_64 19/11/2013 21:19:56 | | log flags: file_xfer, sched_ops, task 19/11/2013 21:19:56 | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6 19/11/2013 21:19:56 | | Data directory: C:\ProgramData\BOINC 19/11/2013 21:19:56 | | Running under account Gabor 19/11/2013 21:19:56 | | No usable GPUs found 19/11/2013 21:19:56 | | Host name: TAKACSGA 19/11/2013 21:19:56 | | Processor: 8 GenuineIntel Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz [Family 6 Model 45 Stepping 7] 19/11/2013 21:19:56 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes syscall nx lm vmx tm2 dca pbe 19/11/2013 21:19:56 | | OS: Microsoft Windows 7: Enterprise x64 Edition, Service Pack 1, (06.01.7601.00) 19/11/2013 21:19:56 | | Memory: 15.95 GB physical, 31.90 GB virtual 19/11/2013 21:19:56 | | Disk: 111.69 GB total, 48.13 GB free 19/11/2013 21:19:56 | | Local time is UTC +1 hours 19/11/2013 21:19:56 | | Config: use all coprocessors 19/11/2013 21:19:56 | | Config: don't compute while BeamNG.drive.x86.exe is running 19/11/2013 21:19:56 | | Config: don't compute while RailWorks.exe is running 19/11/2013 21:19:56 | | Version change (7.0.28 -> 7.2.28) 19/11/2013 21:19:56 | Einstein@Home | URL http://einstein.phys.uwm.edu/; Computer ID 6851222; resource share 100 19/11/2013 21:19:56 | Milkyway@Home | URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 507212; resource share 100 19/11/2013 21:19:56 | | General prefs: from http://setiathome.berkeley.edu/ (last modified 20-Feb-2007 09:57:49) According to your host id at Milkyway: http://milkyway.cs.rpi.edu/milkyway/show_host_detail.php?hostid=507212 Your have two GeForce GTX 660's and were successfully completing Wu's with Boinc 7.0.64 and 331.65 drivers: http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=612201232 http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=612201231 Have you allowed Windows to update it's graphic drivers, as opposed to getting them from Nvidia, or have you updated your driver from Nvidia? Have you been trying to use Remote desktop on that host? (I would have expected Boinc 7.0.28 to say the GPUs have become unusable) Please confirm that the Monitor is connected to one of the GTX 660 and not to it's internal GPU. Claggy |
360)
Message boards :
Questions and problems :
No usable GPUs found after installing 7.2.28
(Message 51364)
Posted 19 Nov 2013 by Claggy Post: Why? I don't know, it worked until now. Please post the Boinc startup from the Event Log, the first 20 to 30 lines will do, it'll give us a glimpse of what OS it is on, and how you installed it: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600#50407 Claggy |
361)
Message boards :
GPUs :
No GPU projects, but AMD Graphics Chip can't suspend.
(Message 51343)
Posted 17 Nov 2013 by Claggy Post: Boinc 7.2.x introduces the following changeset: client: optionally detect GPUs via a child process, for dual_GPU laptops. Claggy |
362)
Message boards :
GPUs :
No GPU projects, but AMD Graphics Chip can't suspend.
(Message 51341)
Posted 17 Nov 2013 by Claggy Post: and what's like with Boinc 7.2.28? Claggy |
363)
Message boards :
BOINC Manager :
User Defined Queue
(Message 51333)
Posted 15 Nov 2013 by Claggy Post: This is just an inefficient use of my resources - what I want is to be able to dedicate the GPU at all times to Einstein At Rosetta deselect 'Use ATI GPU' or 'Use NVIDIA GPU' as appropriate. and dedicate a couple of CPU cores at all times to Rosetta, which would leave them both crunching away uninterrupted. Use the app_config.xml mechanism to limit the max current tasks running at Einstein and Rosetta: Application configuration Claggy |
364)
Message boards :
Questions and problems :
Constantly having to clear to restore web based preferences.
(Message 51251)
Posted 10 Nov 2013 by Claggy Post: I've noticed that whenever I change preferences such as the work queue size, even after updating with the project, the change doesn't apply to some of my computers. I have to open BOINC preferences and click "clear" to restore web-based settings. You're been into the local preferences, and exited by clicking OK instead of Cancel? Claggy |
365)
Message boards :
GPUs :
3 Radeon 6900 only one detected in boinc7.0.65
(Message 51249)
Posted 10 Nov 2013 by Claggy Post: Do you have Monitors, or Dummy plugs attached to the second and third GPUs? According to Clinfo, only two of your GPUs are detected, What does Boinc 7.2.28 detect? There has been many fixes since Boinc 7.0.65, I expect it should detect an extra GPU, but not the third. Claggy |
366)
Message boards :
Questions and problems :
Trying to get the IntelGPU to run apps
(Message 51244)
Posted 10 Nov 2013 by Claggy Post: The IntelGPU shows up during the start up of Boinc: Boinc 7.2.x introduces OpenCL detection for the CPUs, the latest driver reports OpenCL 1.2 capability, yours is only reporting OpenCL 1.1 capability, so you'll probably need a driver update, especially if you want to crunch Einstein Intel GPU work (it requires OpenCL 1.2 support): 10/11/2013 11:39:49 | | CUDA: NVIDIA GPU 0: GeForce GT 650M (driver version 331.65, CUDA version 6.0, compute capability 3.0, 2048MB, 1978MB available, 730 GFLOPS peak) Claggy |
367)
Message boards :
Questions and problems :
Trying to get the IntelGPU to run apps
(Message 51243)
Posted 10 Nov 2013 by Claggy Post: I think my problem is lack of a dummy plug. Since it wasn't a dedicated GPU, the thought of a dummy plug slipped past unnoticed. My monitor is hooked to my 660ti, so chances are this is the problem. I am heading to Radio Shack in the morning for the parts to make a dummy plug.The other option is to just extend the desktop onto the HD4000, telling it to use 'display device on VGA', i've used this on my Nvidia/ATI hosts for years, whether this works on Intel GPUs is another matter, my Nvidia/Intel host is a Laptop with only one display, both GPUs are are almost always available, no extending desktops or dummy plugs required here. Claggy |
368)
Message boards :
GPUs :
problem uninstalling ATI's opencl need help
(Message 51134)
Posted 3 Nov 2013 by Claggy Post: Umm: AuthenticAMD Claggy |
369)
Message boards :
Questions and problems :
BOINC on OS X 10.9 refuses to connect to internet
(Message 51130)
Posted 3 Nov 2013 by Claggy Post: Can you post the Boinc startup from the Event Log, the first 30 to 40 lines will do. Does Boinc Manager manage to connect to the client? Claggy |
370)
Message boards :
GPUs :
problem uninstalling ATI's opencl need help
(Message 51129)
Posted 3 Nov 2013 by Claggy Post: Things to try: Update to Boinc 6.0.64 or 7.2.26, Boinc 7.0.28 has Nvidia GPU memory reporting Bugs, as well as others. Try reinstalling the Nvidia Graphics drivers, Uninstalling the AMD drivers will remove OpenCL.dll (at least the uninstall utility will), not so sure if Nvidia drivers install it any longer. Try installing the APP SDK, that should install OpenCL.dll, you'll want to do it with a recent Boinc, older Boinc might freak out. Claggy |
371)
Message boards :
GPUs :
problem uninstalling ATI's opencl need help
(Message 51126)
Posted 3 Nov 2013 by Claggy Post: I tried removing the AMD catalyst set using "express uninstall manager" but am still having apparent opencl problems on project milkyway. There was a suggestion at their forumMany people in BOINC-land advise that you remove all traces of all AMD drivers before you change to a different one. AMD seem to have heard them, and produced a driver removal tool. The only official-looking link Google could find for me is http://sites.amd.com/us/game/downloads/Pages/catalyst-uninstall-utility.aspx, but that's asking me for a user/password login, which I don't have. Maybe somebody else here does? The url you require is: http://www2.ati.com/drivers/amd_cleanup_util_1.2.1.0.exe Claggy |
372)
Message boards :
Questions and problems :
Linux + Windows = same tasks. Possible?
(Message 51115)
Posted 1 Nov 2013 by Claggy Post: Nope. Claggy |
373)
Message boards :
Questions and problems :
OS-X 10.9 Maverick appears to break seti@home / boinc screensaver
(Message 51037)
Posted 26 Oct 2013 by Claggy Post: After you updated to Mavericks, did you reinstall BOINC? BUMP. Claggy |
374)
Message boards :
Questions and problems :
550ti 680gtx 3gb i7
(Message 51009)
Posted 24 Oct 2013 by Claggy Post: Can you post the first 30 to 40 lines from the Event log after restarting Boinc please. Claggy |
375)
Message boards :
Questions and problems :
550ti 680gtx 3gb i7
(Message 51001)
Posted 24 Oct 2013 by Claggy Post: but when i refresh the config file in hte manager is says it cant find hte file... Which Boinc version? Which OS? Where did you put the cc_config.xml? Is the cc_config.xml called cc_config.xml or is it cc_config.xml.txt ? Did you restart Boinc? GPU detection is only done on startup, doing a read config file won't cause the second GPU to be used. Claggy |
376)
Message boards :
Questions and problems :
Only after computer has been idle for...
(Message 50974)
Posted 23 Oct 2013 by Claggy Post: You might want to try Boinc 7.0.64 from the repository, I do remember a fix for detecting whether a Linux host was idle, don't remember if that was before of after 7.0.64 through, (And I still don't know why the repositories are still using 7.0.27 as their default Boinc, when the recommended here is 7.0.65, and soon to be 7.2.xx.) Claggy |
377)
Message boards :
Questions and problems :
Only after computer has been idle for...
(Message 50962)
Posted 22 Oct 2013 by Claggy Post: I'm running BOINC Manager under Ubuntu 12.04 LTS. Boinc Manager is just the GUI, saying that so makes it sound you haven't got the Boinc client installed, (better just to say you have Boinc installed) O.K, the normal questions, which version of Boinc? Where did you get it from? the Repositories, or did you get it from here? Claggy |
378)
Message boards :
Questions and problems :
Intel 4000 GPU + nvidia 660 GPU ?
(Message 50922)
Posted 20 Oct 2013 by Claggy Post: My problem is Intel 4000 GPU will not process projects along side of the discrete GPU geforce 660. Boinc can't detect your HD4000, the solutions are to either connect a Monitor to it, use a dummy plug instead, or extend the desktop onto it. Claggy |
379)
Message boards :
Questions and problems :
Controlling BOINC when running under unprivileged account
(Message 50920)
Posted 20 Oct 2013 by Claggy Post: Until you're told us a few things about your system, which OS, which Boinc version, if it's Windows, what kind of installation did you do, if it's Linux, then where you got it from, it'll be hard to give you you an answer, hence no replies: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600 Claggy |
380)
Message boards :
Questions and problems :
All project with CUDA capabilities are freeze and Display driver stopped responding and has recovered..
(Message 50909)
Posted 19 Oct 2013 by Claggy Post: MilkyWay doesn't have a CUDA application, only OpenCL. And Setiathome has Cuda32, Cuda42, Cuda5 and OpenCL apps suitable for your GPU: Setiathome Applications Is it just one of these apps that cause problems or all? Claggy |
381)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 50882)
Posted 17 Oct 2013 by Claggy Post: And now it's back. At least main is. And now Beta is up too. Claggy |
382)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 50878)
Posted 17 Oct 2013 by Claggy Post: Oops.... I did report that Svn was down, doubt they need to bring everything else down to bring it up, it's normally still up during maintenance. Claggy |
383)
Message boards :
The Lounge :
The Seti is Slumbering Cafe
(Message 50875)
Posted 17 Oct 2013 by Claggy Post: Now What?! Who knows? Claggy |
384)
Message boards :
Questions and problems :
"Windows cannot find" error message
(Message 50858)
Posted 16 Oct 2013 by Claggy Post: My backup machine is an AMD FX-6100, Win XP Pro SP-3, 8GB mem, GTX460, 64GB SSD, BOINC 7.0.64 (x86). It gets, processes and returns work units fine, BUT, it gives me an error message 'Windows cannot find "http://www.enigmaathome.net/" ' (as well as for all my other projects: Seti, Einstein, Milkway, even BOINC Web Site). I've checked all the failed internet addresses against those listed in my Event Log and they are all spelled exactly the same. Whenever I press any of the buttons under "Project web pages" or the top 3 buttons under "Help" BIONC also fails in exactly the same way. The bottom button under "Help" is "About BOINC Mgr" and it works probably because it does not have to go out to the internet. Sounds as if the firewall is blocking Boinc Manager from accessing the internet, or Boinc Manager can't find the default Browser, the Boinc client has no problem and is still asking for work (at least from Enigma@Home): All tasks for computer 76857 For your info, Boinc is installed in two locations, the Boinc program files location where all the Boinc files are installed, the Client, the Manager, etc, and the Boinc Data directory where all the user files, project files and project apps reside, Then I created a new BOINC2 folder and installed BOINC Mgr 7.0.64 (x86) into it 10/16/2013 7:38:39 AM | | Data directory: C:\Documents and Settings\All Users\Application Data\BOINC2 In the above two entries you're said you're created a separate Boinc Data directory called BOINC2 and installed the Boinc Manager (*) to it, this isn't advisable as they are separate for (Windows) security reasons, (if you tried to set the Boinc Data directory location to the Boinc program files directory, you'd find none of the project apps would be able to run correctly because of the restricted rights in the Program files directory), and i'm not sure if the first statement is even true, perhaps you're only created a new Boinc Data directory, and that all the Boinc program files are still installed to the Boinc program files directory. * Boinc is made up of a number of parts, the Boinc client (boinc.exe), Boinc Manager (the GUI) (boincmgr.exe) as well as the boinccmd command-line tool (boinccmd.exe), the Boinc tray program (the keyboard/mouse idle detection program) (boinctray.exe), etc, saying you're only installed Boinc Manager to it is odd, rather that you're installed Boinc to BOINC2 Claggy |
385)
Message boards :
Questions and problems :
GPU problem on Mac OS X with 7.0.65
(Message 50785)
Posted 6 Oct 2013 by Claggy Post: I did try multiple earlier versions - none helped. In the event log, there is no mention of the GT 120 at all. Have you tried connecting a monitor to it, or a dummy plug? Claggy |
386)
Message boards :
GPUs :
Debian/Ubuntu/Mint/Derivatives - GPU recognition fixes
(Message 50673)
Posted 29 Sep 2013 by Claggy Post: There's another GPU recognition fix in this thread: No usable GPUs found. AMD Radeon HD6750 Claggy |
387)
Message boards :
Projects :
News on Project Outages
(Message 50650)
Posted 26 Sep 2013 by Claggy Post: Apparently Orbit@home is rising from the dead: orbit@home is upgrading! Claggy |
388)
Message boards :
Questions and problems :
Adding new projects that aren't on the list of BOINC
(Message 50649)
Posted 26 Sep 2013 by Claggy Post: Rather than selecting one of the listed projects, you just paste the project's url in, it's normally mentioned on their front page, if not, then it's normally the url of that front page. Thanks for the mention of Orbit@home, that project has been dead for some while, seems they are coming back up soon. Claggy |
389)
Message boards :
Questions and problems :
BOINC Screensaver
(Message 50610)
Posted 23 Sep 2013 by Claggy Post: Only the Setiathome CPU apps have a screensaver, their GPU apps don't have one. If this host is yours: Computers belonging to Dani Corbi I'd would discontinue trying to Crunch GPU Astropulse on it until you're managed to get to complete workunits without the app producing overflows, the majority are going inconclusive, then invalid, the HD4600 is supposed to be capable of doing Astropulse (unlike Seti v7), so i'd look at it's cooling first. Claggy |
390)
Message boards :
Questions and problems :
BOINC Send Pending problem
(Message 50607)
Posted 23 Sep 2013 by Claggy Post: News on Project Outages New date of server migration is planned on friday 20th. It should start at about 07:30 UTC and supposed needed time is about 6 - 8 hours. Claggy |
391)
Message boards :
Questions and problems :
10 projects and no new tasks for weeks..
(Message 50569)
Posted 18 Sep 2013 by Claggy Post: Can you supply some required information please: http://boinc.berkeley.edu/dev/forum_thread.php?id=8600 Claggy |
392)
Message boards :
Questions and problems :
BOINC Manager not connecting to BOINC client
(Message 50538)
Posted 17 Sep 2013 by Claggy Post: You have set up the remote_hosts.cfg on the CentOS host, and got it's GUI RPC password haven't you? http://boinc.berkeley.edu/wiki/Controlling_BOINC_remotely Claggy |
393)
Message boards :
Questions and problems :
Boinc aborts
(Message 50537)
Posted 17 Sep 2013 by Claggy Post: Please post a link to the host in question. Claggy |
394)
Message boards :
Questions and problems :
boinc stuck in screensaver mode
(Message 50448)
Posted 11 Sep 2013 by Claggy Post: Please post your Boinc startup from the Event Log. Claggy |
395)
Message boards :
Questions and problems :
BOINC 7.0.64 apparently stops processing
(Message 50410)
Posted 5 Sep 2013 by Claggy Post: Certainly wasn't mentioned by you. Do you think you could season your great wisdom with a little more courtesy? We are, after all, united in the pursuit of learning, are we not? No, it was mentioned by Me.: How would one inactivate the "stop computing" function? Claggy |
396)
Message boards :
BOINC Manager :
boinc-manager not receiving jobs in time
(Message 50401)
Posted 3 Sep 2013 by Claggy Post: A word of warning about Boinc 7, with the new schedulers in it, cache operation now works differently, Boinc 7 uses the cache settings as a Minimum and a Maximum Buffer, it'll fill to a Minimum plus Maximum level, then wait for the amount of work to drop to below the Minimum level before asking for work again, for a consistent cache set the first cache setting to the amount of days work you want to cache, and the second cache setting to a very low value, something like 0.1, If you use the cache settings you probably had from Boinc 6 you'll find the amount of work cached will vary a lot. Claggy |
397)
Message boards :
Questions and problems :
Running multiple projects
(Message 50398)
Posted 3 Sep 2013 by Claggy Post: Thank you SekeRob2. By going to the project specific preferences and changing the resource share. Claggy |
398)
Message boards :
Questions and problems :
BOINC 7.0.64 apparently stops processing
(Message 50374)
Posted 1 Sep 2013 by Claggy Post: How would one inactivate the "stop computing" function? By going to your Account page on your favourite project, then the Computing Preferences page, and either clicking the 'Restore Defaults' button at the bottom left (if it has it), Or by setting the following to nothing: 'Suspend work if no mouse/keyboard activity in last --- minutes' Claggy |
399)
Message boards :
BOINC client :
BOINC has become a total mess
(Message 50335)
Posted 27 Aug 2013 by Claggy Post: So what Boinc version is this on? Claggy |
400)
Message boards :
GPUs :
No usable GPUs found. AMD Radeon HD6750
(Message 50219)
Posted 17 Aug 2013 by Claggy Post: Have you tried the fixes in the following thread?: Debian/Ubuntu/Mint/Derivatives - GPU recognition fixes Claggy |
401)
Message boards :
BOINC Manager :
Feature Suggestion: List Projects in Boinc Manager Client
(Message 50168)
Posted 10 Aug 2013 by Claggy Post: That is already implemented in Boinc Manager. Claggy |
402)
Message boards :
Questions and problems :
BOINC on Android
(Message 50166)
Posted 10 Aug 2013 by Claggy Post: Seti hasn't released a Android app on Arm yet: Setiathome Applications An Android Arm app has only just gone on Seti Beta, if you want to test that app you'll have to join Seti Beta: Seti Beta Applications Claggy |
403)
Message boards :
GPUs :
GPU works, then is missing after every restart. Completely removing BOINC and reinstalling fixes. Ubuntu Linux 13.04, NVIDIA GeForce 8400GS
(Message 50142)
Posted 8 Aug 2013 by Claggy Post: I think people have published various delay lines for the BOINC start-up scripts over the years, but I don't have any links. It's in a Sticky at the top of this Sub-Forum: Debian/Ubuntu/Mint/Derivatives - GPU recognition fixes Claggy |
404)
Message boards :
Questions and problems :
getting frequent advisory: runtime exited in abnornal way
(Message 50062)
Posted 3 Aug 2013 by Claggy Post: I run only one project with BOINC, climate prediction. Ask at CPDN when they are up, it is their project application: http://climateapps2.oerc.ox.ac.uk/ Claggy |
405)
Message boards :
News :
BOINC for Android launched
(Message 49962)
Posted 23 Jul 2013 by Claggy Post: Initial feedback. I had multiple computation errors on WCG and the phone heated up to the point where computation was suspended and I was getting worried. I uninstalled. If possible place the device on a large piece of metal (like on top of a computer case), the heat will conduct away fast and the device will stay cool to the touch. Claggy |
406)
Message boards :
Questions and problems :
Tasks/applications not switching
(Message 49939)
Posted 21 Jul 2013 by Claggy Post: What does "doing enough work for the project" mean? Last night I had the same task running for 9 hours straight without switching, and I've had the same task running before for 24 hours or more. It's like it never does "enough work" for one project. Ironically, the project it's spending all its time on is the one I have the most credits in, lol. Boinc 7 has a REC-based scheduler: History Lesson Claggy |
407)
Message boards :
Questions and problems :
Tasks/applications not switching
(Message 49930)
Posted 21 Jul 2013 by Claggy Post: The 60 minute preference is the minimum task switching interval, not the interval where tasks must switch, once Boinc has done enough work for that project then it'll switch. Claggy |
408)
Message boards :
Questions and problems :
BOINC task complete but not initiating transfer
(Message 49906)
Posted 18 Jul 2013 by Claggy Post: What cache settings are you using on Boinc 7.0.29? Boinc 7 has a new scheduler, it'll wait until the amount of work in the cache has fallen below the Minimum value before it'll ask for work again, so if you have a big additional value set you'll probably get this behaviour, Where with Boinc 6 you would set 0.1 + 3 days, with Boinc 7 you should set 3 + 0.1 days. Claggy |
409)
Message boards :
Projects :
News on Project Outages
(Message 49892)
Posted 17 Jul 2013 by Claggy Post: Can't access Primegrid at all...website seems to be down-at work so I don't know if WU's are reporting or not Website is up here, and reporting is O.K too. Claggy |
410)
Message boards :
Questions and problems :
Exclusive applications
(Message 49854)
Posted 13 Jul 2013 by Claggy Post: Do you get confirmation from Boinc of the following?: 13/07/2013 12:46:56 | | Suspending file transfers - an exclusive app is running 13/07/2013 12:47:12 | | Suspending computation - an exclusive app is running If you don't, check you're got the activity menu set to 'Run based on preferences' If you do get the above message, what app revisions aren't suspending? Claggy |
411)
Message boards :
Projects :
News on Project Outages
(Message 49847)
Posted 12 Jul 2013 by Claggy Post: The CPDN Boinc pages and scheduler etc have been down all day, the remaining pages don't say why. Claggy |
412)
Message boards :
Questions and problems :
BOINC task complete but not initiating transfer
(Message 49837)
Posted 12 Jul 2013 by Claggy Post: I have participated in BOINC a good number of year, but I recently realized my completed tasks are not transferring. This has been since I got a new Mac a couple years ago. I run Mac OS 10.6.8. I would love to get these completed tasks (obviously there's quite a few of them) to transfer. This is the Boinc (Development) Forum, you can't upload completed Wu's here as it isn't a project, all projects have their own servers, without knowing which projects you can't upload to we can't really help, Please have a read of this thread and supply some info, like a Boinc version, the Boinc startup and upload failures from the Message Tab, or Event Log. Claggy |
413)
Message boards :
Questions and problems :
AIDS@HOME Projects runs although I have deselected it.
(Message 49832)
Posted 10 Jul 2013 by Claggy Post: The title got corrupted. You as the OP can change it, post a new post to the thread (don't do a reply), then edit the thread title. Claggy |
414)
Message boards :
Questions and problems :
Incorrect Nvidia GPU Detection and Count
(Message 49819)
Posted 8 Jul 2013 by Claggy Post: Not entirely true. Around 2 years ago i had this same issue. My GPUs were 2 GTX 590s and 1 GTX 460. It was being reported that i had 5 GTX 460s. Definitely not the best GPU in the system. The GTX 460 was in the first PCIe slot though and i assumed that's what caused it then, being in the primary position. Also, it was the only GPU with a monitor attached. However this time, the GTX 560 is in the first slot, and again is the only GPU with a monitor attached. The Titan is in the last. Boinc works out what is best in the following order: BOINC decides which GPU is best based on these factors, in decreasing priority): http://boinc.berkeley.edu/dev/forum_thread.php?id=7899&postid=45886 So in that respect, a GTX460 with compute capability 2.1 is better than a GTX590 with compute capability 2.0 Claggy |
415)
Message boards :
Questions and problems :
Incorrect Nvidia GPU Detection and Count
(Message 49817)
Posted 8 Jul 2013 by Claggy Post: Boinc only uses the Best GPU (of a vendor) by default, and will only report that Best GPU (of that vendor) to the project, so that is expected behaviour. Claggy |
416)
Message boards :
BOINC Manager :
Something got borked during update
(Message 49810)
Posted 7 Jul 2013 by Claggy Post: The event log says 7/7/2013 5:41:55 PM | | Data directory: C:\Documents and Settings\All Users\Application Data Sounds as if you missed 'BOINC' out when you specified the Data directory, the default directories are: The default directory where BOINC will install the data files to is: http://boincfaq.mundayweb.com/index.php?view=592&sessionID=327c023bf733540cd2fbdd8dbf27844e Claggy |
417)
Message boards :
Questions and problems :
BOINC causes random freezing of OS
(Message 49802)
Posted 7 Jul 2013 by Claggy Post: Although this is an older thread I'd like to make an addition to it. I see no mention of your problem on the Einstein Boards, what app was this with? you could have been running a multitude of different apps, Looking for users called arfurdent at Einstein only shows one, also from the UK, neither of his PC's are particularly high spec, both only being Core 2 Duos, both with very low spec GPUs: Computers belonging to arfurdent Claggy |
418)
Message boards :
Questions and problems :
Cannot attach to Climateprediction.net
(Message 49767)
Posted 1 Jul 2013 by Claggy Post: If you were to look in CPDN's forums you'll find threads about 'can't attach to CPDN' in the Number Crunching, and the Q & A > Getting started Subforums: Message boards : Number crunching Questions and Answers : Getting started Claggy |
419)
Message boards :
GPUs :
ATI HD5970 GPU problem
(Message 49761)
Posted 1 Jul 2013 by Claggy Post: 01/07/2013 06:07:42 | | CAL: ATI GPU 0: ATI Radeon HD 5800 series (Cypress) (CAL version 1.4.1417, 1024MB, 991MB available, 4640 GFLOPS peak) I'd say you're got a mismatch of drivers and APP runtimes installed, CAL 1.4.1417 driver is from Cat 11.6, that normally would have APP runtime 650.9 installed, you have APP 898.1 installed, which is from Cat 12.2/Cat 12.3 Basically you're running a driver for APP SDK 2.4, and you're trying to run an APP runtime ment for use with an SDK 2.6 driver, from so i'm not surprised your host bluescreens: ATI Driver Version Cheat Sheet Uninstall your driver, then use the AMD Catalyst Un-install Utility to clean out the AMD orphaned files, reboot, then install a recent driver, Cat 13.4 should work fine, then you'll need to detach and reattach to Seti to clear out the compilations the AP v6 and/or MB v7 apps have done, (You can just delete the compilations so the latest APP runtime generates new ones, I don't have time to list the filenames, ask in Number Crunching at Seti for info) Claggy |
420)
Message boards :
GPUs :
ATI HD5970 GPU problem
(Message 49759)
Posted 1 Jul 2013 by Claggy Post: What projects is this on?, Boinc is just the Managing program, it's the project apps that do the work, while you posted some specs, please post your Boinc startup from the Event Log, the first 20 to 30 lines will do. Claggy |
421)
Message boards :
Questions and problems :
Cannot attach to Climateprediction.net
(Message 49743)
Posted 27 Jun 2013 by Claggy Post: Try: http://climateapps2.oerc.ox.ac.uk/cpdnboinc/forum_thread.php?id=5447&nowrap=true#46518 As part of the ongoing problems with attaching here, it's becoming obvious that there's a very important file on everyone's computer. Claggy |
422)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 49740)
Posted 27 Jun 2013 by Claggy Post: AstroPulse won't even 'Suspend.' It is continually taking up 45 - 48% of CPU regardless whether i click on "Suspend." Also, in spite that i have the specified "Computing allowed: Only after computer has been idle for 3.00 minutes," it runs continuously. What type of host? what OS? CPU or GPU app? Nvidia or ATI? Boinc startup messages from the Event Log? Link to the host? Claggy |
423)
Message boards :
News :
SETIspirit (Windows GUI for SETI@home) released
(Message 49739)
Posted 27 Jun 2013 by Claggy Post: Norton does not like your program at all It's not his program, David is only reporting the release of it, report the problem to the author. Claggy |
424)
Message boards :
Questions and problems :
Boinc suddenly running only 1 core
(Message 49709)
Posted 24 Jun 2013 by Claggy Post: No idea what went wrong, but it works again You don't have any Milkywayathome Multithreaded tasks now. Claggy |
425)
Message boards :
Questions and problems :
CPU core counts w/ GPU, inconsistencies found.
(Message 49695)
Posted 23 Jun 2013 by Claggy Post: Already fixed (six days ago): Changeset dddf586 in boinc-v2 client: remove code that avoids overcommitting CPUs if MT jobs present. It'll likely be in the Next Recommended Release a year or so from now. ;-P (I don't know if DA has any intention of backporting these little fixes into the Boinc 7.0.x line) Claggy |
426)
Message boards :
GPUs :
Can a legacy HD4850 GPU and a HD5570 GPU coexist?
(Message 49691)
Posted 23 Jun 2013 by Claggy Post: I'd be very tempted to uninstall Cat 12.1, make sure all the files are removed, and reinstall it, Any idea what the minimum driver for a HD 5570 is? Because the Catalyst Uninstaller doesn't remove the files it installed in the System32 directory you should either remove them manually, or use the Atiman uninstaller, AMD have supplied an uninstall utility, but it only for Windows 7: Dlls from Catalyst driver left behind after uninstallation Atiman Uninstaller Note: I've never used the Atiman Uninstaller, TBar recommended it recently to Swordfish to fix his Windows 8 host: http://setiathome.berkeley.edu/forum_thread.php?id=72088 Claggy |
427)
Message boards :
GPUs :
Can a legacy HD4850 GPU and a HD5570 GPU coexist?
(Message 49690)
Posted 23 Jun 2013 by Claggy Post: Claggy, Thanks for your response! I wouldn't trust the GPU Tab to display the correct info for the 2nd GPU, on my i7-2600K/GTX460/HD7770: GPU 1: NVIDIA GeForce GTX 460 9.18.13.1422 (3-14-2013), R314.22 (branch: r313_00-263) OpenGL 4.3 (GeForce GTX 460/PCIe/SSE2 with 296 ext.) OpenCL 1.1, GeForce GTX 460 compute units:7@1600MHz GPU 2: AMD Radeon HD 7770 9.18.13.1422 (3-14-2013) - GL:nvoglv64 OpenGL 4.3 (GeForce GTX 460/PCIe/SSE2 with 296 ext.) OpenCL 1.1, GeForce GTX 460 compute units:7@1600MHz Claggy |
428)
Message boards :
GPUs :
Can a legacy HD4850 GPU and a HD5570 GPU coexist?
(Message 49688)
Posted 23 Jun 2013 by Claggy Post: GIGABYTE EP45-UD3P; Rev 1.1 Boinc concists of the Boinc client, Boinc Manager (the GUI) and the Boinctray (the idle detection program), normally you can only run one client, the <allow_multiple_clients>0</allow_multiple_clients> cc_config option allows you to run extra clients, which allows you to configure them differently, say running a pre-Fermi GPU on one and a post-Fermi GPU on the other. According to the log file, BOINC detects both GPUs but doesn't use them. I realize I'm telling BOINC not to use the 1st one. AMD/ATI OpenCL support for XP has been deprecated, the last driver with OpenCL support was Cat 12.1, running later drivers than that either causes OpenCL not to be detected, or in some cases causes the host to Blue screen: ATI Driver Version Cheat Sheet I'd say that there is a problem with Boinc detecting the correct OpenCL platforms and is giving up, does GPUCapsVieiwer detect any other OpenCL Platforms or devices? Claggy |
429)
Message boards :
Questions and problems :
Boinc suddenly running only 1 core
(Message 49669)
Posted 20 Jun 2013 by Claggy Post: Yes, plenty Which are? For anyone else watching they were all Cuda tasks, with the exception of two tasks being Milkyway@home Multithreaded tasks: http://boinc.fzk.de/poem/show_host_detail.php?hostid=149257 http://boinc.gorlaeus.net/show_host_detail.php?hostid=90045 http://boinc.thesonntags.com/collatz/show_host_detail.php?hostid=92115 http://einstein.phys.uwm.edu/show_host_detail.php?hostid=4216186 http://lhcathomeclassic.cern.ch/sixtrack/show_host_detail.php?hostid=10142545 http://milkyway.cs.rpi.edu/milkyway/show_host_detail.php?hostid=325168 http://registro.ibercivis.es/show_host_detail.php?hostid=265802 http://setiathome.berkeley.edu/show_host_detail.php?hostid=6169925 Since this host only has one GPU they were only ever going to run on that GPU, and not on any of the CPU cores. Claggy |
430)
Message boards :
BOINC client :
BOINC Projects won't Initialize
(Message 49649)
Posted 18 Jun 2013 by Claggy Post: What project is this on? Claggy |
431)
Message boards :
Questions and problems :
BOINC causing PC performance problems since new version
(Message 49626)
Posted 16 Jun 2013 by Claggy Post: Since BOINC ver. 7.0.64 (x86), there has been a new "don't need" response The 'Don't need' message isn't from the scheduler, it's from the client, if your host's cache is full, the client doesn't need any more work, the 'don't need' is just a message from the client saying why it didn't ask for work. Claggy |
432)
Message boards :
Questions and problems :
Cannot add project
(Message 49593)
Posted 13 Jun 2013 by Claggy Post: I can log into my account (I did this to send this post) but... when I try to add another project to my compute list and it asks for my username and password, it says it is wrong. 1) The Boinc Development forum is not a project, you can't Crunch work from here. 2) Just because you're got an account here (or at a single project) doesn't mean you're got an account at all projects, they are all separate, so you need to attach to them as a new user (if you're never made an account there), but use the same email address. Claggy |
433)
Message boards :
Questions and problems :
BOINC or Seti@Home not releasing memory?
(Message 49561)
Posted 10 Jun 2013 by Claggy Post: Hello, You might want to select 'AstroPulse v6: no' in your Setiathome Project preferences, the Nvidia OpenCL app is particularly laggy on legacy GPUs, you should have no problem with the v7 Cuda apps. (There have also been quite a few reports of the Nvidia Astropulse app not suspending when told to do so, each report has been on legacy GPUs too) All tasks for computer 6957972 To get the v7 Cuda23 Wu's to work without erroring you'll want to make sure you set 'SETI@home Enhanced: no', Set NNT, complete what Wu's you have, report them, then reset the project, and Unset NNT, it's because of a very old problem where Nvidia didn't version it's Cuda dlls, meaning the present v7 Cuda 2.3 app will try and use the old Cuda 2.0 dlls that the old Cuda 6.08 app used. Claggy |
434)
Message boards :
Questions and problems :
BOINC causing PC performance problems since new version
(Message 49552)
Posted 9 Jun 2013 by Claggy Post: am I correct in saying that there have been new versions of the SETI software released more or less at the same time as the new BOINC? Yes, the Setiathome v7 applications have just been released, they add an extra search called autocorrelation, Claggy |
435)
Message boards :
Questions and problems :
Suddenly no CPU tasks are crunched anymore, only GPU tasks
(Message 49551)
Posted 9 Jun 2013 by Claggy Post: With this Boinc release it was working fine for quite a while. Looking at your host ID's at your projects shows you have some MilkyWay@Home N-Body Simulation v1.18 (mt) tasks, they should be fully occupying your CPU: All MilkyWay@Home N-Body Simulation tasks for computer 467996 Claggy |
436)
Message boards :
Questions and problems :
Only 1 NVIDIA GPU being used
(Message 49550)
Posted 9 Jun 2013 by Claggy Post: Boinc will only use the most capable GPU by default, to enable use of it you need a cc_config.xml with the <use_all_gpus> option enabled: Client_configuration The next question is why is OpenCL being detected twice for each GPU: 6/8/2013 10:29:55 PM | | CUDA: NVIDIA GPU 0: GeForce GTX 275 (driver version 301.42, CUDA version 4.20, compute capability 1.3, 896MB, 834MB available, 1037 GFLOPS peak) Claggy |
437)
Message boards :
Questions and problems :
BOINC causing PC performance problems since new version
(Message 49543)
Posted 9 Jun 2013 by Claggy Post: HostID 3080266 belonging to Richard Gregory matches the description, if you want to start the diagnostics before he gets back to us with confirmation. First thing i'd do is disable Astropulse v6 in the project preferences, complete the OpenCL AstroPulse v6 Wu and see if there is an improvement just running the regular v7 Cuda Wu's, my experience with running AP on a 9800GTX+ was it was quite laggy and performance poor compared with running v6 Cuda Wu's. Claggy |
438)
Message boards :
Questions and problems :
BOINC causing PC performance problems since new version
(Message 49535)
Posted 8 Jun 2013 by Claggy Post: Can you post a Host ID for it at Seti please. Claggy |
439)
Message boards :
Questions and problems :
Suddenly no CPU tasks are crunched anymore, only GPU tasks
(Message 49530)
Posted 8 Jun 2013 by Claggy Post: Hi all, What Boinc version? What project? What application? Do you have any CPU tasks? Does that project have any CPU tasks to send for the CPU applications you're running? Posting the Event log sometimes helps to fill in the Blanks. Claggy |
440)
Message boards :
Questions and problems :
What does "Authorization failure: -155" mean?
(Message 49363)
Posted 27 May 2013 by Claggy Post: It doesn't work on my linux machine. With sudo, there's no output whatsoever, without sudo it's error -155. Removing the last / doesn't help either. Try the following, replacing the hostname with the actual host name, and the passwd with the actual password (that's stored in it's gui_rpc_auth.cfg file): boinccmd --host hostname --passwd passwd --project www.worldcommunitygrid.org update Claggy |
441)
Message boards :
Questions and problems :
Novice question
(Message 49358)
Posted 26 May 2013 by Claggy Post: Hi, I installed BOINC 7.0.64 with Einstein, SETI, LHC, Rosetta and MindModeling projects. Each project seems to be computing away happily in turn but I installed BOINC more than 16 hrs ago and the BOINC manager still shows 0 work done and each screensaver shows 0 credit. I would just like to know that something is getting accomplished. Computer is 3.2GHz, 3 Gb RAM with 600Gb+ of free hd space. Am I missing something? Your wingmen need to complete their tasks too, and then they need to validate together, check out your task lists at your projects to see who you're paired with, and whether your tasks complete O.K Claggy |
442)
Message boards :
Questions and problems :
Boinc not Stopping when computer in Use
(Message 49353)
Posted 26 May 2013 by Claggy Post: I'm having the same problem with Windows XP 32-bit. Which Setiathome GPU app is running when the mouse is laggy? the 6.09 Cuda23 MB app, or the 6.04 OpenCL Astropulse app? i suspect only the 6.04 OpenCL AP app. Does the Lagginess dissappear if you set GPU usage to Suspend in the Activity menu? CPU apps run at idle priority and shouldn't cause any lagginess, except maybe on the oldest of systems. Claggy |
443)
Message boards :
Questions and problems :
What does "Authorization failure: -155" mean?
(Message 49352)
Posted 26 May 2013 by Claggy Post: // also, forcing an update does not work Try without the last / Using the following caused Seti to update O.K: C:\Program Files\BOINC>boinccmd --project http://setiathome.berkeley.edu update C:\Program Files\BOINC> 26/05/2013 19:50:35 | SETI@home | update requested by user Claggy |
444)
Message boards :
Questions and problems :
What does "Authorization failure: -155" mean?
(Message 49350)
Posted 26 May 2013 by Claggy Post: How do I know which directory is boinc-client launched from? What OS is this on? On Windows it will be from C:\Program Files\BOINC or C:\Program Files (x86)\BOINC depending if you're using 32bit or 64bit Boinc, or a 32bit Boinc on a 64bit OS. Boinc on Windows has a separate Data directory, i believe Linux runs from the same directory location as the Data directory, so it should be similar to what is posted in it's Startup log (assuming you can run the manager to see it in the first place), it should be eithier /var/lib/boinc-client or /home/your_user_name depending if you got Boinc from one of the Linux repositories or from here. Claggy |
445)
Message boards :
Questions and problems :
What does "Authorization failure: -155" mean?
(Message 49347)
Posted 26 May 2013 by Claggy Post: 2) I have everything in Ageless' list. What do I have to do now in order to be able to use boinccmd instead of the graphical BOINC Manager? Info on using the boinccmd tool is in the wiki: Boinccmd tool Claggy |
446)
Message boards :
Questions and problems :
Ubuntu: BOINC takes 100% processor time ALL the time
(Message 49345)
Posted 26 May 2013 by Claggy Post: Pity because I've been with the project for > 14 years. I doubt that, the first post here is from 2002, and the first users all joined in 2005, while the first Boinc projects date from 2005 and 2004, with Boinc Beta a bit before that, so really you can only have been involved in Boinc for about 10 or 11 years Max, while your join date here is 29 May 08, that is only 5 years ago. Claggy |
447)
Message boards :
Questions and problems :
Boinc not Stopping when computer in Use
(Message 49344)
Posted 26 May 2013 by Claggy Post: I'm having the same problem with Windows XP 32-bit. What Boinc version is this on? Does this host have any GPUs? What project's applications aren't suspending? What is the position of the Activity Menu selections? What are your Computing Preferences set to? Please post your Boinc startup from the Event Log, and where Boinc suspends the apps. Claggy |
448)
Message boards :
Questions and problems :
boinc hasnt been running (E@Home)
(Message 49260)
Posted 22 May 2013 by Claggy Post: What does the Event Log say? What does E@Home's project forums say? Does the project have any work? Claggy |
449)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 49235)
Posted 22 May 2013 by Claggy Post: ... Does it populate with information when you install Boinc as a service? Is so post that info. Claggy |
450)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 49225)
Posted 21 May 2013 by Claggy Post: Can you post the Boinc startup log for one of those failed attempts of starting Boinc 7.0.64, you'll find the log in the following directory (assuming you installed it in the default location): C:\ProgramData\BOINC the directory is a hidden directory, so you'll need to unhide it or paste the directory straight into explorer, the file you need is stdoutdae.txt (older entries are in stdoutdae.old), the first 30 lines will do. Claggy |
451)
Message boards :
Questions and problems :
Trying to add a new computer to my account. BOINC manager won't download work units
(Message 49150)
Posted 16 May 2013 by Claggy Post: Can you post the log entries from the Event Log please. Claggy |
452)
Message boards :
Questions and problems :
BOINC Manager doesn't connect to boinc-client on Ubuntu
(Message 49099)
Posted 13 May 2013 by Claggy Post: Installation instructions are in the Boinc Wiki: Installing BOINC Claggy |
453)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 49060)
Posted 9 May 2013 by Claggy Post: Can you try making a file called remote_hosts.cfg in the Boinc Data directory, and in it put your host name or internal up address, I think you need to restart Boinc after that. Claggy |
454)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 49043)
Posted 8 May 2013 by Claggy Post: Since I was getting nowhere with 7.0.64(x64), I decided to re-install 7.0.28(x64) on May 5 and let it crunch until the Tuesday outage. At least the system was being productive. After everything had processed, uploaded and been reported, I tried installing 7.0.64(x64) once again and was still getting the "connecting to localhost" problem message. Remembering that some of the features that are in 7.0.64 began in version 7.0.40, I thought I'd install it even though it is buggy just to see what would happen. Lo and behold, 7.0.40(x64) immediately connected to localhost. At no time during this did I download any WUs. I then tried installing 7.0.41 and 7.0.42 with the same result. BOINC 7.0.43(x64) was stuck at "connecting to localhost" (just like 7.0.64) for several minutes until I killed it. Loads of things changed between 7.0.42 and 7.0.43: BOINC 7.0 Change Log and news The first changeset's i'd suspect are: client: disable remote access if So i'd try removing the gui_rpc_auth.cfg from the Boinc Data directory as see if you can connect, (you shouldn't be able to) then try putting a fresh one in there with at least some text in there (it's normally 32 characters), (keep your original one safe) Claggy |
455)
Message boards :
Questions and problems :
upgrade gone wrong,
(Message 49036)
Posted 7 May 2013 by Claggy Post: Follow this FAQ: Windows Installer Error 1706: Setup cannot find the required files / 1714: older version cannot be removed / BOINC.msi cannot be found / The feature you are trying to use is on a network resource that is unavailable / Error 1325. is not a valid short name Claggy |
456)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 48991)
Posted 5 May 2013 by Claggy Post: Since 7.0.64 finally connected to localhost, I thought I'd see what happens if WUs were downloaded. Now I cannot connect to the server. No proxy is being used. I'll try re-installing 7.0.28 or 6.10.58 and see what happens. Three minutes after you posted that, at 15:13:05 UTC you got work: All tasks for computer 6563089 It also says strangely that you're running Boinc 7.0.28, perhaps because you're hidden your host it doesn't get updated so often: Computer 6563089 Claggy |
457)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 48943)
Posted 3 May 2013 by Claggy Post: 02-May-2013 17:19:56 [---] No config file found - using defaults As you're already been told, you can't have the Data directory in the Program files directory, the default location is C:\ProgramData\BOINC Claggy |
458)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 48932)
Posted 2 May 2013 by Claggy Post: I can post the startup log for BOINC 7.0.28, but 7.0.64 doesn't even get to line number 1 so there's nothing to post. Sorry. That seems to suggest that the 7.0.64 Boinc client is hanging on startup. 01-May-2013 13:47:37 [---] Config: simulate 12 CPUs Can you try removing your cc_config.xml and see if there is any difference, Boinc 7.0.64 has a fix for the Incorrect Nvidia GPU Memory Bug, because both of your GPUs are the same, the <use_all_gpus> entry shouldn't be needed any longer, and since your CPU has 12 cores there should be no need to simulate 12 cores eithier. Claggy |
459)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 48928)
Posted 2 May 2013 by Claggy Post: Can you post the Boinc startup log for Boinc 7.0.28 and for 7.0.64, you'll find the log in the following directory (assuming you installed it in the default location): C:\ProgramData\BOINC the directory is a hidden directory, so you'll need to unhide it or paste the directory straight into explorer, the file you need is stdoutdae.txt (older entries are in stdoutdae.old), the first 30 lines will do. Claggy |
460)
Message boards :
Questions and problems :
Unable to connect to localhost after installing 7.0.64
(Message 48899)
Posted 1 May 2013 by Claggy Post: Is Boinc.exe even running?, are project apps running? Perhaps the the 7.0.64 Boinc.exe is crashing, Boinc Manager is never going to connect to a client that isn't running. Claggy |
461)
Message boards :
Questions and problems :
BOINC 5.8.16 does not work with Windows 95
(Message 48895)
Posted 1 May 2013 by Claggy Post: I will need to wait for some more time to see if I will actually get any tasks from SETI@home. My SETI@home preferences says as below against "Run only the selected applications" You won't get any work with just the SETI@home v7 selection set, v7 hasn't gone live on the Main project yet, Set the SETI@home Enhanced selection to yes instead. See there are no applications for v7 yet: Setiathome applications Claggy |
462)
Message boards :
Questions and problems :
BOINC doing no work since Linux update
(Message 48873)
Posted 30 Apr 2013 by Claggy Post: We recently had that same symtom posted to the boinc_alpha list by SekRob: [boinc_alpha] Boinc 7.0.xx Computing stops when clock is set backwards! His parting post was: Gianfranco, DA's answer was: I'll keep looking into this. and Charlie answered: Changing the clock time is not the same as the switch to and from Daylight Savings. To simulate that, change your setting of the time zone you are in, not your clock. As David says, the underlying system time does not change, only the adjustment used to _show_ the current time of day. Claggy |
463)
Message boards :
Questions and problems :
GPU problem on Mac OS X with 7.0.65
(Message 48825)
Posted 26 Apr 2013 by Claggy Post: I've PM's Charlie Fenton, the Boinc OS X programmer and asked him to have a look. Claggy |
464)
Message boards :
Questions and problems :
GPU problem on Mac OS X with 7.0.65
(Message 48823)
Posted 25 Apr 2013 by Claggy Post: Can you post the startup from the last version of Boinc you had installed? the first 20 to 30 lines will do. Fri Apr 26 11:18:19 2013 | | Data directory: /Library/Application Support/BOINC Data In the above directory should be two files called stdoutdae.txt and stdoutdae.old (or the OS X equivalent), eithier of those should have it. Claggy |
465)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 48784)
Posted 23 Apr 2013 by Claggy Post: After I left the machine for several hours, I came back, moved the mouse to stop BOINC and it was chunky. It's been pointed out to me by PM (by someone who doesn't have an Account here) that boinctray isn't shown as being running, and you haven't mentioned it, boinctray is the idle detection program, it is started by the registry when you start the OS, Try rebooting, does the OpenCL AP app suspend O.K then? Claggy |
466)
Message boards :
GPUs :
Intel GPUs
(Message 48740)
Posted 21 Apr 2013 by Claggy Post: Collatz has also added an OpenCL Intel app in the last couple of days. Claggy |
467)
Message boards :
Questions and problems :
BOINC and CentOS x64 -how to run?
(Message 48731)
Posted 20 Apr 2013 by Claggy Post: You missed the Wink. Claggy |
468)
Message boards :
Questions and problems :
BOINC and CentOS x64 -how to run?
(Message 48728)
Posted 20 Apr 2013 by Claggy Post: [root@localhost BOINC]# yum install glibc The other point of view is CentOS 6.4 is incompatible with Boinc ;-) Claggy |
469)
Message boards :
Questions and problems :
BOINC fails in Windows 7
(Message 48700)
Posted 19 Apr 2013 by Claggy Post: 3 of 3 programs (Bionic, Einstein, ABC)keeps telling me I need 32mb more disk space? I have 400+Gb free disk space? What's going on? You're got one of the Disk and memory usage settings set too low, and your projects have filled the allowed space, without log entries from the Event Log, we'd be just guessing which one is causing it, please restart Boinc and post the first 30 lines or so, and post the following three settings from your computing preferences: Disk: use at most 10 GB Claggy |
470)
Message boards :
Questions and problems :
To update or not to update
(Message 48667)
Posted 18 Apr 2013 by Claggy Post: What cache settings are you using? Boinc 7 has a new scheduler, it'll cache an amount of work adding up to the Minimum plus Maximum watermarks, then wait for the cache level to drop below the Low watermark before asking again, having a 2 + 0.01 cache (as opposed to 0.01 + 2 which was used in Boinc 6) will get you more often reporting. Claggy |
471)
Message boards :
Questions and problems :
Intel(r) Visual Fortran run-time error
(Message 48649)
Posted 16 Apr 2013 by Claggy Post: Report it in the CPDN thread of that name: Questions and Answers : Windows Claggy |
472)
Message boards :
BOINC Manager :
Windows 8 support?
(Message 48638)
Posted 15 Apr 2013 by Claggy Post: Just started back using seti@home again. While on the subject of probs with new operating systems---is there any way to recover credits for past work done--back in the era of windows 98 and windows NT I ran months if not years ---had a problem with an OS upgrade and could not reconnect ---"no such email on file" and so forth. Yes--I do remember the email address and password I was using back then. If you're still got the old email address and password you should just be able to log onto that account, if that doesn't work, you should be able to link a Seti classic account to your new account, check out your Account page. Claggy |
473)
Message boards :
Questions and problems :
this application has requested the runtime to terminate it in an unusual way
(Message 48609)
Posted 12 Apr 2013 by Claggy Post: I have been seeing and ignoring this message for a while and have no idea what it means nor how to deal with it. Shall I just stop contributing time to Boinc? Please send your reply to my logon address or a notice that one has been posted and where. Thank you. No-One knows what your logon address is, so no-one can send anything to it, they might PM you, but if you haven't enabled notifications by email then you'll never know. Claggy |
474)
Message boards :
Questions and problems :
Boinc not Stopping when computer in Use
(Message 48545)
Posted 7 Apr 2013 by Claggy Post: Please post the Boinc startup messages from the Event log, the first 20 to 30 lines will do. Claggy |
475)
Message boards :
BOINC Manager :
Boinc not showing all tasks
(Message 48421)
Posted 31 Mar 2013 by Claggy Post: Only the task that have been active are shown. Press the 'Show all tasks' Button then. Claggy |
476)
Message boards :
Questions and problems :
Boinc use only one of the two GPU
(Message 48411)
Posted 30 Mar 2013 by Claggy Post: I configurate the cc_config.xml in my folder C:\ProgramData\BOINC You're got use_all_gpus switched on, then off, which way to you want it to work? Claggy |
477)
Message boards :
Questions and problems :
Boinc use only one of the two GPU
(Message 48404)
Posted 30 Mar 2013 by Claggy Post: Those are two different users, j0nhy and Jonathan, Jonathan's GPUs are different: 3/29/2013 23:08:07 | | NVIDIA GPU 0 (not used): GeForce GTX 275 (driver version 310.90, CUDA version 5.0, compute capability 1.3, 896MB, 8381237MB available, 1037 GFLOPS peak) 3/29/2013 23:08:07 | | NVIDIA GPU 1: GeForce GTX 660 (driver version 310.90, CUDA version 5.0, compute capability 3.0, 2048MB, 1573MB available, 1982 GFLOPS peak) 3/29/2013 23:08:07 | | OpenCL: NVIDIA GPU 0 (not used): GeForce GTX 275 (driver version 310.90, device version OpenCL 1.0 CUDA, 896MB, 8381237MB available) 3/29/2013 23:08:07 | | OpenCL: NVIDIA GPU 1: GeForce GTX 660 (driver version 310.90, device version OpenCL 1.1 CUDA, 2048MB, 1573MB available) Claggy |
478)
Message boards :
Questions and problems :
Boinc use only one of the two GPU
(Message 48402)
Posted 30 Mar 2013 by Claggy Post: I have the same problem, even with: That entry either hasn't been added to the right cc_config.xml (in the correct location), or you haven't restarted Boinc, on my T8100: 30/03/2013 10:09:40 | | Starting BOINC client version 7.0.59 for windows_x86_64 Claggy |
479)
Message boards :
Questions and problems :
I need a way to fine-tune download/upload back-off period
(Message 48392)
Posted 29 Mar 2013 by Claggy Post: I can see it, so I must be special ;>)... it says something like [tried n]. Let me force the hand and pull the internet cable from the router, wont disconnect from router as that kind of immediately crashes running tasks on my Linux box [how old is that bug, I can't remember]. Especially a problem on my Android devices (with NativeBoinc) where Network connectivity isn't always there, eithier because my mobile doesn't have 3G coverage, or my Tablet doesn't have a WiFi connection, Wu's still error out even with Network suspended, i wonder if NativeBoinc is trying to do a News update at that point. Claggy |
480)
Message boards :
GPUs :
OpenCL has no affect.
(Message 48354)
Posted 26 Mar 2013 by Claggy Post: Please post a link to your Host at one of your projects, and post the Boinc startup messages from the Event log, the first 20 to 30 lines will do. As far as i know there are no projects with Stock Intel OpenCL GPU apps yet, the only one that i know of has to be installed by anonymous platform. Both the following links only show Intel OpenCL GPU support on 3rd Generation Chips, and only on Windows, Sandybridge is Generation 2: Intel® SDK for OpenCL Applications 2012 - Frequently Asked Questions Intel® SDK for OpenCL* Applications 2012 Release Notes Claggy |
481)
Message boards :
GPUs :
Installing driver for HD7750. What am I missing?
(Message 48322)
Posted 23 Mar 2013 by Claggy Post: Please post your Boinc startup messages from the Event log, the first 20 to 30 lines will do. Claggy |
482)
Message boards :
Questions and problems :
WCG files remain in memory
(Message 48304)
Posted 21 Mar 2013 by Claggy Post: Everything checks out. The extension is xml (and I double-checked that this is the file I edited), and it's in the same directory as client_state.xml. Can you post your Boinc startup messages from the Event log, the first 20 to 30 lines will do. Claggy |
483)
Message boards :
Questions and problems :
App version needs OpenCL but GPU doesn't support it
(Message 48285)
Posted 20 Mar 2013 by Claggy Post: Fedora and Ubuntu are most likely using Journaled file systems (ext3, ext4). This means that each version of the file saved to the file system gets a version number appended to the end of the file name. Please post your Boinc startup messages from the Event Log, the first 20 to 30 lines will do. Claggy |
484)
Message boards :
Projects :
News on Project Outages
(Message 48267)
Posted 19 Mar 2013 by Claggy Post: Reposting what Richard posted in the Setiathome Panic Mode On (82) Server Problems? thread: http://ucbsystems.org/category/active/scheduled-outage/ Claggy |
485)
Message boards :
Questions and problems :
WCG files remain in memory
(Message 48264)
Posted 19 Mar 2013 by Claggy Post: Are you using the Web Preferences or the Local Preferences set in Boinc Manager? Local Preferences override Web preferences, you'll need to hit the Clear Button to revert to Web Preferences. Claggy |
486)
Message boards :
BOINC client :
resource share
(Message 48212)
Posted 15 Mar 2013 by Claggy Post: Thanks a bunch, found it. Got it set but the one I set to a lower resource is still getting more work units run. Didn't see anything anout the scheduling priority setting so not sure why Rosseta seems to be getting more units run than SETI. Boinc decides the scheduling priority, now adays it's a REC-based scheduler, as opposed to time based. How many tasks in progress do you have from Seti? At present there is a limit of 100 CPU tasks and 100 GPU tasks in progress at Seti, if you're at the limits, then any other project will fill up your cache: Continued server problems. We're continuing to have issues due to a database problem early last week and a botched attempt to fix it. Claggy |
487)
Message boards :
BOINC client :
resource share
(Message 48210)
Posted 14 Mar 2013 by Claggy Post: You set the resource share in your project's preference pages. (as opposed to on the Computing preferences page which applies to all projects) Claggy |
488)
Message boards :
Questions and problems :
5 jobs running on quad core.
(Message 48186)
Posted 13 Mar 2013 by Claggy Post: Suits me. Another day has gone by, and you still haven't said what Boinc version or what VirtualBox was installed. http://boinc.berkeley.edu/dev/forum_thread.php?id=5925 Claggy |
489)
Message boards :
Questions and problems :
New user and want to help
(Message 48184)
Posted 13 Mar 2013 by Claggy Post: What kind of system? Windows, Mac or Linux? What CPU? What GPU? What Power Supply does it have? Did it Blue Screen when it shut down?, What does the Event viewer say? Are you sure it just didn't go to Sleep? Claggy |
490)
Message boards :
Questions and problems :
How to auto update and report projects?
(Message 48167)
Posted 12 Mar 2013 by Claggy Post: What Boinc version? and what are your cache settings? Claggy |
491)
Message boards :
Questions and problems :
5 jobs running on quad core.
(Message 48165)
Posted 12 Mar 2013 by Claggy Post: Forget it. Why? If you're worked out that it's because of an old Boinc or VirtualBox version, then tell us so. Claggy |
492)
Message boards :
Projects :
Two inactive acounts at Seti@home.
(Message 48138)
Posted 10 Mar 2013 by Claggy Post: Hi! Attach a host to one of those accounts, complete some work, wait for it to validate, once your RAC is high enough then you'll be able to post. Claggy |
493)
Message boards :
Questions and problems :
Computer Setup Details - Specify LARGE external disk for projects
(Message 48130)
Posted 9 Mar 2013 by Claggy Post: The Boinc program files and Boinc Data directories can be set by going into the Advanced Menu when installing Boinc. Claggy |
494)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 48088)
Posted 7 Mar 2013 by Claggy Post: The x86 version should be installed to C:\Program Files (x86)\BOINC and not C:\Program Files\BOINC which is for the 64bit version. (on a 64bit OS)bump You did say you had a 64bit OS, so you should uninstall the x86 version and install the x64 version: I doubt my PC specs are the problem here. Claggy |
495)
Message boards :
BOINC client :
I can't believe I am the only one.....
(Message 48081)
Posted 6 Mar 2013 by Claggy Post: I should mention resource set. Post the Resource Share from Boinc of ALL your projects, just because you're only interested in GPU work doesn't mean the other projects resource share don't matter. The scheduling priority Shouldn't be above 0, they should be Negative numbers only, not Positive. Claggy |
496)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 48052)
Posted 5 Mar 2013 by Claggy Post: Given that Astropulse has problems, can a "Disable Astropulse" checkbox be added so it does not run? That is already there, in your Setiathome preferences, untick Astropulse_v6 Claggy |
497)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 48041)
Posted 4 Mar 2013 by Claggy Post: OK. I've got the log for today. I looked up host 4101861 at Seti: http://setiathome.berkeley.edu/results.php?hostid=4101861 On the following task i'd expect to see a 'Termination request detected. GPU device synched, awaiting termination...' entry if the task is suspended, but there isn't one: http://setiathome.berkeley.edu/result.php?resultid=2857769292 Here is one of my own at Seti Beta on my 9800GTX+ with the r1305 app (as opposed to yours on the r1316 app), admittantly the 9800GTX+ is a bit faster than a 8600GT: http://setiweb.ssl.berkeley.edu/beta/result.php?resultid=10828704 I do have a 8400GS i can try the NV OpenCL r1316 app on, it has only done one r1316 Wu so far, but it didn't seem to suspend or restart at any point: http://setiweb.ssl.berkeley.edu/beta/result.php?resultid=12754183 Claggy |
498)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 48022)
Posted 3 Mar 2013 by Claggy Post: bump Details please, how much of that did you do?, what client version did you install? x86 or x64? what directories did they install to? Claggy |
499)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 48019)
Posted 2 Mar 2013 by Claggy Post: Can you post your Boinc startup messages from the Event Log, the first 20 to 30 lines will do, (Since the Boinc forum isn't a project it doesn't display your computers, once we know your host id's we can then go and look at Seti and look at the task's stderr.txt entries and see what is being reported by the app) Claggy |
500)
Message boards :
Questions and problems :
Project Downloads Slow: ca. 1 kbps?
(Message 48000)
Posted 1 Mar 2013 by Claggy Post: Ahh I see it now. LHC and climateprediction have no new tasks for Asteroids download so quickly, they're out of the transfers tab before I know it. Which leaves two questions: 1) There is only a 100 Mbits/sec link for downloads/uploads/scheduler use at Seti, the link is almost always has well over 100 Mbits/sec of downloads on it, probably up to 500 Mbits/sec when Short AR Multibeam work is in the majority, this won't improve until a) Setiathome v7 is released, b) the project gets enough donations to cover their server needs, and then cover the probably $100K cost of putting a new fiber link in, c) or they move their servers off the hill. Graphs for gigabitethernet2_3 2) Look at CPDN's server status page, there are no Wu's ready to send: Server status Claggy |
501)
Message boards :
Questions and problems :
Project Downloads Slow: ca. 1 kbps?
(Message 47997)
Posted 1 Mar 2013 by Claggy Post: What projects did you attach to? What cache settings did you use? Boinc startup messages from the event log are always useful too. Claggy |
502)
Message boards :
Questions and problems :
Preferences when to use GPU - problem
(Message 47984)
Posted 28 Feb 2013 by Claggy Post: edit: disallowing GPU entirely is done via the Activity menu in BOINC Manager, or permanently via an option to be added to the cc_config.xml. Maybe there are other ways, but these sprung up from recollection. Disallowing GPU activity in the Activity menu won't stop Boinc asking for GPU work, any work received would sit in Limbo and never get crunched, (and the project would have to resend it to other hosts) To stop getting GPU work you can also set 'Use Nvidia GPU' or 'Use ATI/AMD GPU' to No at each of your projects, Boinc then would then never ask for GPU work from any of those projects again, Claggy |
503)
Message boards :
BOINC client :
project is not highest priority...
(Message 47966)
Posted 24 Feb 2013 by Claggy Post: I just consider it to not work properly when I am out of Wu's and BM doesn't request work. Boinc Manager is the GUI (the Graphical User Interface), it doesn't request work and never will, that is the Boinc client's job. Claggy |
504)
Message boards :
BOINC client :
astropulse_6 won't stop computing!
(Message 47959)
Posted 24 Feb 2013 by Claggy Post: Where are the Activity menus for CPU and GPU set? Claggy |
505)
Message boards :
Questions and problems :
BOINC 7.0.28 on Windows 7 64 - only Desktop visible when comming back from idle
(Message 47957)
Posted 24 Feb 2013 by Claggy Post: I see - but the problem is, that on my PC I am also using BOINC and on this machine I have no issues with GPU processing - so if I deactivate it in project settings I will not be able to use GPU on this computer. You have Four Locations/Venues available, ie Default, Home, School and Work, So you can make Four different Combinations of preferences. Claggy |
506)
Message boards :
BOINC client :
project is not highest priority...
(Message 47955)
Posted 24 Feb 2013 by Claggy Post: Same as before: http://boinc.berkeley.edu/dev/forum_thread.php?id=8196&postid=47823 Learn to read your own logs. Here's a single work fetch cycle from lower down, and its outcome: Moo Wrapper, Seti and Seti Beta have done too much work for your resource share, other projects need to do work to bring your those project priorities back towards zero, with your 3 GPUs configured to run on single projects each that is unlikely to ever happen, 2013-02-17 08:29:55 | Moo! Wrapper | Config: excluded GPU. Type: all. App: all. Device: 0 Claggy |
507)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 47951)
Posted 24 Feb 2013 by Claggy Post: bump Try Boinc 7.0.52, if you can't get that to work eithier, i'd uninstall Boinc, delete the Boinc Data directory, and do a fresh install, and attach to your projects afresh, you could always revert to your old host id's by following this FAQ: How to revert to an older HostID number? Claggy |
508)
Message boards :
Questions and problems :
faster computer = lower credits :-O
(Message 47945)
Posted 22 Feb 2013 by Claggy Post: This is the Boinc (Development) Forums, we can't see what projects your computers are attached to, or if they are producing valid work, Best ask at the projects concerned. Claggy |
509)
Message boards :
Questions and problems :
BOINC can't connect to the internet
(Message 47923)
Posted 21 Feb 2013 by Claggy Post: What messages are shown in the Event log? Claggy |
510)
Message boards :
Questions and problems :
BOINC 7.0.28 on Windows 7 64 - only Desktop visible when comming back from idle
(Message 47919)
Posted 21 Feb 2013 by Claggy Post: Where can I set the preferences? On each project's preference page which you can get to from your Account page, for example, for Setiathome: SETI@home preferences If you have multiple computers, and you want to keep crunching on their GPUs you might want to move your computer to a different venue/location, and set up different preferences for that location/venue. Claggy |
511)
Message boards :
Questions and problems :
BOINC 7.0.28 on Windows 7 64 - only Desktop visible when comming back from idle
(Message 47875)
Posted 20 Feb 2013 by Claggy Post: Make sure you go to each project that has GPU apps, and deselect 'Use AMD/ATI GPU' in their project preferences, otherwise you'll still be sent Wu's for the GPU, Suspending GPU usage doesn't stop GPU Wu's being sent to your computer, If you work out which project's GPU app wasn't suspending, please let that project know, Claggy |
512)
Message boards :
Questions and problems :
Most of my hosts have stopped processing
(Message 47864)
Posted 19 Feb 2013 by Claggy Post: What does Deepfreeze do? Claggy |
513)
Message boards :
Questions and problems :
BOINC not pausing when using the computer
(Message 47862)
Posted 19 Feb 2013 by Claggy Post: Please post your Boinc startup messages from the Event log, the first 20 to 30 lines will do. Claggy |
514)
Message boards :
Questions and problems :
Boinc use only one of the two GPU
(Message 47843)
Posted 18 Feb 2013 by Claggy Post: Please post your Boinc startup messages from the Event log, the first 20 to 30 lines will do, Claggy |
515)
Message boards :
Questions and problems :
BOINC 7.0.28 on Windows 7 64 - only Desktop visible when comming back from idle
(Message 47840)
Posted 18 Feb 2013 by Claggy Post:
What happens if you suspend GPU usage? Does the problem still occur? What projects are you doing GPU work on? Does it only occur on one projects GPU apps? Not very helpful if you hide your host ID's, that was one of the snippits that might help find the problem, Boinc is only the managing program for project apps, it is project apps that use memory and CPU time, Claggy |
516)
Message boards :
BOINC client :
GPU starved and client responds "don't need"
(Message 47797)
Posted 17 Feb 2013 by Claggy Post: Please get rid the "don't need" option. If it's not here for testing/debugging anymore. The Don't need is an Informational Message, it is not an option, If Boinc feels it has eithier enough work Total, or has done enough work from a project (for it's resource share), then it doesn't need any more. Boinc used to have no Informational messages about why it wasn't asking for work, so you didn't know why it wasn't asking for work, now it does. Claggy |
517)
Message boards :
BOINC client :
GPU starved and client responds "don't need"
(Message 47786)
Posted 17 Feb 2013 by Claggy Post: Finally You shouldn't need to abort the download, just retry download, as long as no downloads (or uploads) are counting down, Boinc should ask for work, Claggy |
518)
Message boards :
Questions and problems :
BOINC 7.0.28 on Windows 7 64 - only Desktop visible when comming back from idle
(Message 47785)
Posted 17 Feb 2013 by Claggy Post: Please post your Boinc startup messages from the Event log, the first 20 to 30 lines will do, Claggy |
519)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 47725)
Posted 11 Feb 2013 by Claggy Post: I've exited the client, ended the processes in task manager, and started the client. I've also loaded the "read config file" from the client and I still do not have anything in my stdoutdate. How did you exit the client? and How did you start the client? How did you do a 'read config file' from the client?, You can do that from Boinc Manager, you can't do from the boinc client (not directly anyway) Restart your PC, and when Boinc Manager (the GUI) is up and running, tell us what Boinc programs are running in Task Manager, and what project applications (if any) are running. Claggy |
520)
Message boards :
Questions and problems :
How can I increase the amount of memory my projects use?
(Message 47696)
Posted 9 Feb 2013 by Claggy Post: If you want a project's app to use more memory you'll have to ask at their project how to do it, you probably can recompile their app to use 100Gb, whether or not it'll be any faster is another matter, it'll probably mean there is 99.85GB sat around wasted, Claggy |
521)
Message boards :
Questions and problems :
Boinc Password
(Message 47693)
Posted 8 Feb 2013 by Claggy Post:
Did you do uninstall, then reinstall, or did you just run the installer again? Claggy |
522)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 47633)
Posted 3 Feb 2013 by Claggy Post: Is that it? nothing else? What's in the stdoutdae.old? Do you still have a client_state.xml, an account_setiathome.berkeley.edu.xml, an global_prefs.xml and a master_setiathome.berkeley.edu.xml? Claggy |
523)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 47629)
Posted 3 Feb 2013 by Claggy Post: I don't even have a stdoutdae.txt file in my BOINC dir. The stdoutdae.txt is in the Boinc Data directory, not the Boinc program files directory, Claggy |
524)
Message boards :
Questions and problems :
Something wrong with BOINC Manager?
(Message 47626)
Posted 3 Feb 2013 by Claggy Post: version 7.0.28 Have you tried restarting the PC? Is the client even running? Is the client crashing on start? What does stdoutdae.txt say? Have a read of When requesting and giving help on these forums... , especially the 1st paragraph, the 1st and 2nd paragraph under General, and the 1st and 2nd paragraph under Windows. Claggy |
525)
Message boards :
Questions and problems :
BOINC will not use all GPUs
(Message 47624)
Posted 3 Feb 2013 by Claggy Post: I got GTX690, working nicely in SLI mode. But, BOINC will not use second GPU. Part of the problem is you're running a Boinc with the Nvidia Wacky GPU memory reporting Bug, because of the difference in available memory, only the GPU with the most available is used, there is a partial fix in Boinc 7.0.36, and a full fix in Boinc 7.0.38 (that shouldn't be used because of other problems), just using <use_all_gpus> in a cc_config.xml should override that, you could try the latest Alpha, which is at the time of writing Boinc 7.0.47, If that doesn't enable both GPUs, then you'll eithier need to disable SLI, or try different drivers, Nvidia did change the drivers some time ago so turning off SLI wasn't required, but this was on older GPUs, i don't think this was a change in Boinc itself. Claggy |
526)
Message boards :
Questions and problems :
BOINC will not use all GPUs
(Message 47623)
Posted 3 Feb 2013 by Claggy Post: Yes I did. I even rebooted PC to make sure. Did you get the following in your Boinc startup messages: 03/02/2013 13:11:13 Config: use all coprocessors Claggy |
527)
Message boards :
Questions and problems :
BOINC will not use all GPUs
(Message 47619)
Posted 3 Feb 2013 by Claggy Post: According to BOINC startup log, data directory is: The cc_config.xml looks O.K, Have you restarted Boinc as GPU detection is only done on Boinc startup? Claggy |
528)
Message boards :
Questions and problems :
strage behaving of Boinc
(Message 47618)
Posted 3 Feb 2013 by Claggy Post: Can you post your Boinc startup messages please, something like the first 30 lines will do for now, Claggy |
529)
Message boards :
Questions and problems :
Boinc-client 7.0.28 and uploading problem to http://worldcommunitygrid.org !
(Message 47590)
Posted 31 Jan 2013 by Claggy Post: Just in case someone comes across this thread. Your problem is different to Seal's, his host wouldn't Upload results World Community Grid Full Stop, yours aren't reporting, most likely because of your Cache settings: Boinc 7 has a scheduler that works differently to the scheduler in Boinc 6, it will cache work totalling the Min and the Max Buffers, then wait the amount of work available to drop below the Min Buffer before asking again, the solution is to have the 'Additional' Cache setting set to a very low value, then Boinc will ask more often. Claggy |
530)
Message boards :
GPUs :
Intel GPUs
(Message 47566)
Posted 29 Jan 2013 by Claggy Post: Desktop, not a specific brand: i7-3770 3.4 GHz, Mobo ASUS P8Z77-V LX, 60 GB SSD (have 16+GB free ATM), 8 Giga RAM. What BIOS version is the P8Z77-V LX running? Claggy |
531)
Message boards :
Questions and problems :
WHS2011 - will not use GPU
(Message 47547)
Posted 27 Jan 2013 by Claggy Post: I used remote desktop to log in and then just disconnect to leave BOINC running. As you're already been told, you can't use Remote Desktop with GPUs, it uses different drivers without Cuda support, Use TeamViewer or VNC instead, What drivers version did you install?, because i've already told you another 8400 GS user has reported Boinc wouldn't detect his 8400 GS's with drivers later than 301.42, so try 301.42 drivers, The 'GPUs have become unusable' is when Boinc detects the Use of Remote Desktop, and disables GPU use so preventing any GPU tasks from erroring out. Claggy |
532)
Message boards :
Questions and problems :
WHS2011 - will not use GPU
(Message 47541)
Posted 27 Jan 2013 by Claggy Post: Andrew Tapp over at Seti reports that Boinc won't detect his Quad 8400GS's with any driver newer than 301.42, more usefully he supplied his startup logs: Missing coprocessor When i have a spare moment, I'm going to upgrade the drivers on my 8400GS (on XP), see if it is detected, then move the GPU to my Vista machine and try later drivers on that, Claggy |
533)
Message boards :
BOINC client :
7.0.44 strangeness
(Message 47515)
Posted 26 Jan 2013 by Claggy Post: 2. Only for the super advanced. Exit BOINC completely. Open client_state.xml file. Find the entry for Seti. Manually edit the <rsc_fpops_est/> so they are 10 times their original size. Do this for all GPU work in cache. Save file, restart BOINC. You'll also have to do that to <rsc_fpops_bound> too, otherwise tasks will continue to be on the verge of erroring out. Claggy |
534)
Message boards :
Questions and problems :
Boinc Install Exclusive service only
(Message 47482)
Posted 23 Jan 2013 by Claggy Post: I still don't see the service Have you done anything? If you don't describe what you have and have not done, we will be none the wiser to what you're done or not done. Claggy |
535)
Message boards :
GPUs :
Can BOINC tell the difference between ATI & NVIDIA Open CL?
(Message 47369)
Posted 18 Jan 2013 by Claggy Post: Uninstall the Nvidia drivers, then reinstall the Nvidia drivers, Both Nvidia & AMD/ATI drivers install OpenCL.dll, if you run a computer with both Nvidia and AMD/ATI drivers, then you uninstall a driver (from one or the other) OpenCL.dll gets uninstalled (if the uninstaller is working correctly) (The order of driver installation is also important when running a mixed Nvidia/AMD/ATI computer, if you install Nvidia drivers last, some AMD/ATI OpenCL apps give inconclusive results, so AMD drivers should be installed last) Claggy |
536)
Message boards :
GPUs :
Intel GPUs
(Message 47328)
Posted 16 Jan 2013 by Claggy Post: When will BOINC support Sandy Bridge GPUs (which is what I have in my machine)? Simple: Never, If Intel doesn't give Sandy Bridge GPUs OpenCL support, Boinc will never support Sandy Bridge GPUs. Claggy |
537)
Message boards :
BOINC Manager :
System indefinitely slow after deactivating GPU
(Message 47256)
Posted 14 Jan 2013 by Claggy Post: Problem with HCC-GPU tasks, which use OpenCL, is that NVidia cards are just not very good at crunching these and using the PC at same time. What a load of Rubbish, All Nvidia GPUs that are capable of using Cuda are also capable of using OpenCL, and have been capable of using OpenCL since the 197.xx drivers: http://www.nvidia.co.uk/object/cuda_opencl_new_uk.html OpenCL Claggy |
538)
Message boards :
BOINC client :
BOINC won't Initilize Projects
(Message 47225)
Posted 14 Jan 2013 by Claggy Post: I tried all that yesterday several times & it didn't work, for some reason this morning it did work. I suspect it was something to do with my Home Network but can't be sure. Anywoot it's working now so Thanks ... Which project are you trying to attach to? Are they up? Claggy |
539)
Message boards :
BOINC Manager :
Remove leftover tasks and projects?
(Message 47224)
Posted 14 Jan 2013 by Claggy Post: There are applications mentioned in your client_state.xml that don't have a suitable GPU now, just 'Reset' the applicable projects and the problem will go away. (as long as you were just running their Stock apps, otherwise you'll need to edit their app_info yourself to remove the surplus apps) Claggy |
540)
Message boards :
Questions and problems :
No Work available to process
(Message 47215)
Posted 14 Jan 2013 by Claggy Post: This is not the Setiathome forums, This is the Boinc Development Forums, for project specific problems you should ask at the project in question. Claggy |
541)
Message boards :
Questions and problems :
"No work available to process" - why?
(Message 47214)
Posted 14 Jan 2013 by Claggy Post: "No work available to process" - why? In the case of Setiathome, all the Multibeam work has already been split, leaving just Astropulse, and because the are less Astropulse workunits per tape than Multibeam it is now hit or miss whether you grab any work, Setiathome Server status page and since the Servers will be down for air conditioner maintenance during the 14th and 15th January, there probably won't be a substantial amount of work available before the 16th. In the case of Orbit at home, If NASA doesn't give you a grant, there is no money to do development or produce workunits to send out, 1) Message boards : Science : Updates [December 2012] (Message 7465) Claggy |
542)
Message boards :
GPUs :
"This GPU does not support openCL"
(Message 47119)
Posted 7 Jan 2013 by Claggy Post: Now, why that is, I don't know. It's why I wonder what exactly boinc looks for to see what a GPU supports. and in C:\Windows\SysWOW64 too, but with a different filesize, Claggy |
543)
Message boards :
Questions and problems :
GPU Work Units Only
(Message 47086)
Posted 6 Jan 2013 by Claggy Post: This may cause confusion to some of us. Although the <ncpus> is also used to simulate "multicore" cpus, but it also has the 0-parameter, which according to the wiki page: "in newer clients really means zero to e.g. only allow GPU computing" <ncpus>0</ncpus> is a debug setting, David has said before that it shouldn't be used to limit the number of CPU cores in use, we have the 'On multiprocessors, use at most x processors' and the 'On multiprocessors, use at most 100% of the processors' settings for that, The "in newer clients really means zero to e.g. only allow GPU computing" statement dates all the way back to before April 09 when GPU computing was only just beginning, circa Boinc 6.6.20, so i hardly think it is intended for use with modern Boinc versions. Claggy |
544)
Message boards :
Questions and problems :
Suprised to find an overabundance of "High Priority" tasks
(Message 47078)
Posted 6 Jan 2013 by Claggy Post:
Your cache setting is how many days work you want, there are two settings, you set it in your computing preferences at one of your projects or locally in Boinc Manager (the Boinc Manager local preferences overide the Web preferences), Say you put in 10 + 10 days, and you have a project where the deadline for all work is three days, all the work for that project will have to run in high priority or it'll be late (otherwise it'll be 20 days before it even starts) For Setiathome the Computing Preferences are here: http://setiathome.berkeley.edu/prefs.php?subset=global (Note this a Global Preference, you only need to set it at one project, once Boinc contacts that project it'll then use the latest preferences) the following should be suitable for a Boinc 7 host running lots of projects: Network usage Claggy |
545)
Message boards :
Questions and problems :
BOINC powering down computer - use ended
(Message 47075)
Posted 6 Jan 2013 by Claggy Post:
Window's power setting are set to put computers to sleep after about half an hour, check that you're on a plan that doesn't put the computer to sleep, note: shutting the lid on a laptop will probably also put it to sleep too, you'll need to go into 'change plan settings' if you want to stop that. Claggy |
546)
Message boards :
Questions and problems :
Suprised to find an overabundance of "High Priority" tasks
(Message 47074)
Posted 6 Jan 2013 by Claggy Post: I found an over-abundance of "High Priority" tasks. What are your cache settings? (both of them) Claggy |
547)
Message boards :
Questions and problems :
BOINC powering down computer - use ended
(Message 47060)
Posted 5 Jan 2013 by Claggy Post: DFI LANParty DK 790FX Boinc is just the managing program, it is the project applications that stress your CPU and GPU, not Boinc, and for reliable operation the CPU and GPU require a good PSU, the very thing you haven't mentioned, so what PSU do you have? Claggy |
548)
Message boards :
Questions and problems :
BOINC unable to connect to core client
(Message 47021)
Posted 3 Jan 2013 by Claggy Post: A blank gui_rpc_auth.cfg creates security risks because then anybody can connect to your BOINC client, attach it to their project and make it run whatever application they want unless you've taken appropriate counter-measures. Have you done so? Do you want to spend time learning what you need to do? Or would you find it easier, less time consuming and more secure to just use a password? YMMV. I didn't say that, you don't need to enter a password to connect to localhost, if you going to use Boinc Manager, BoincView, BoincTasks etc to connect to another host then yes you do need to enter the password from it's gui_rpc_auth.cfg Claggy |
549)
Message boards :
Questions and problems :
BOINC unable to connect to core client
(Message 47017)
Posted 2 Jan 2013 by Claggy Post: You don't need to enter a password if you're only connecting to the localhost, so leave it blank, Claggy |
550)
Message boards :
Questions and problems :
Transfers of Seti pending
(Message 47006)
Posted 2 Jan 2013 by Claggy Post: Since you first posted one of Seti's servers has crashed, so they are not giving out fresh work and there should be no competion for downloads, i've checked to see if i can re-download one of my Wu's and i can no problem, (so one of the download servers is up) so the things to do are: restart your host, restart your router, see if eithier of those make a difference, check that your firewall isn't blocking downloads, make sure you're not using a proxy (they sometimes help getting downloads through, but aren't available for ever), make sure you haven't added the download url and IP address to your hosts file (people do this to lock themselves to the under utilised server, but we're recent got a new download server with a new IP address) try a different ISP to see if there is a routing problem, What Boinc version are you running? (one of the ealier Boinc 6.10.x versions had a DNS Bug and wouldn't switch IP addresses) and what OS? Problems like this are best asked at the project in question, there are more people available to help, and some details about your host are available to look at without having to ask for details. Claggy |
551)
Message boards :
Questions and problems :
Some projects not getting WU's while others are
(Message 46974)
Posted 1 Jan 2013 by Claggy Post: Best to ask at those projects, just because you're attached to them all doesn't mean you'll have work from all of them at the same time, Boinc 7 will fetch work from the projects which has the highest priority, and may not not even try and ask for work from others Also, those projects may have no work to give out, or may be down, ie: CPDN has no work to give out: CPDN Server status Setiathome's scheduler has since 02:45:00 UTC been not replying to scheduler requests so is effectively down: Panic Mode On (80) Server Problems? The other projects may have no work, or may be down. Claggy |
552)
Message boards :
Questions and problems :
Some projects not getting WU's while others are
(Message 46972)
Posted 1 Jan 2013 by Claggy Post: Which projects aren't getting work? Claggy |
553)
Message boards :
GPUs :
Memory size not calculated correctly
(Message 46970)
Posted 1 Jan 2013 by Claggy Post: It's a Boinc 7.0.27 Bug in combination with newer Nvidia drivers, there is a partial fix for it in Boinc 7.0.36, and a full fix in Boinc 7.0.38 (but that version has other problems) Claggy |
554)
Message boards :
Questions and problems :
my PC is getting hijacked by !!!
(Message 46961)
Posted 1 Jan 2013 by Claggy Post: Please pass by this thread and at the very least supply your Boinc startup messages, the first 20 to 30 lines will do: http://boinc.berkeley.edu/dev/forum_thread.php?id=5925#34096 Then we'll have an idea what projects you're attached to, and the likely causes. Claggy |
555)
Message boards :
Questions and problems :
Transfers of Seti pending
(Message 46960)
Posted 1 Jan 2013 by Claggy Post: Try highlighting those downloads and press 'Retry now', you might have to do this a few times, (Seti has two download servers, they use roundrobin DNS which switches servers every 5 minutes, but it doesn't work that well, one download server is over utilsed while the other is under utilised} by waiting a few minutes, Suspending Network Activity for a few moments, then resetting Network activity to where it was before, can get the downloads going from the other server, your mileage may vary as they say. Claggy |
556)
Message boards :
Questions and problems :
GPU Work Units Only
(Message 46953)
Posted 31 Dec 2012 by Claggy Post: Just go to each of your projects in turn, and change in their Project Preferences 'Use CPU' to No SETI@home preferences Collatz Conjecture preferences Claggy |
557)
Message boards :
BOINC Manager :
Tasks keep running after BOINC Manager is closed (yes I mean closed as in not running, not in systray)
(Message 46916)
Posted 26 Dec 2012 by Claggy Post: Read this message: Message 46896 Claggy |
558)
Message boards :
Questions and problems :
tasks not stopping on exit from boinc
(Message 46896)
Posted 22 Dec 2012 by Claggy Post: Greetings. Which OS? Which Boinc version, is Boinc 6.10.x, 6.12.x or one of the latest Boinc 7.0.x versions? How did you install Boinc?, was it a 'Protected Application Execution' installation (aka a Service Installation), or a Normal Installation? on a Service Installation, the client runs all the time, even when no one is logged on, to get out of that you'd have to stop the service, uninstall Boinc, Reboot i think, then reinstall Boinc, but go into the Advanced menu and don't tick the 'Protected Application Execution' installation box. Or did you just exit Boinc Manager (the GUI), while leaving the Boinc client running? is boinc.exe still running in task manager (assuming you're running a normal installation) Do you get a 'Boinc Manager - Exit Confirmation' box on trying to exit Boinc? If not, go to 'Tools>Options' (assuming Boinc 6.12.x or 7.0.x), or 'Advanced>Options' (assuming Boinc 6.10.x), Make sure both 'Run Manager at login?' and 'Show Boinc Manager exit dialog?' are ticked, Now try and exit Boinc Manager, If you want to fully exit Boinc Manager and the Boinc client, tick the 'Stop running tasks when exiting the Boinc Manager', tick the 'remember this decision' box to not show the dialog again. Claggy |
559)
Message boards :
Questions and problems :
Temperature problem with running PC unattended.
(Message 46892)
Posted 22 Dec 2012 by Claggy Post: The problem is that when returning back to the PC a little later on, I find it to have power been turned off - mains is still connected on the motherboard. A small movement of the mouse is enough to get the system started up once again. It tells me that the system is locked and that I have to log in again. After that I am able to return directly back to BOINC. On a new Windows install it is configured to put the machine to sleep after someting like half an hour, running Boinc isn't enough to keep it awake, you'll need to change to a different power plan, and maybe edit that to your preference, Claggy |
560)
Message boards :
Questions and problems :
Boinc does not recognize OpenCL (Nvidia GTS450)
(Message 46876)
Posted 21 Dec 2012 by Claggy Post: Where did you get your driver from? From Microsoft?, Dell? or from Nvidia? The Microsoft supplied driver won't come with any support for OpenCL, and apparently neithier does the Dell supplied driver, you'll only get OpenCL support from drivers direct from Nvidia, There has also been OpenCL detection problems with Boinc, but normally it has been with an OpenCL device being detected, but then being not used, Claggy |
561)
Message boards :
Questions and problems :
Between Geforce 670 GTX and Windows 8, BOINC hasn't worked in months...
(Message 46873)
Posted 21 Dec 2012 by Claggy Post: This is the Boinc Development website, Not a Project website, the Boinc developers don't produce apps for projects, the projects do, For Setiathome GTX6xx problems see the workarond in the NVidia driver problems which cause computation errors thread in Number Crunching at the Setiathome project. Claggy |
562)
Message boards :
GPUs :
GPU won't stop when computer not idle
(Message 46850)
Posted 18 Dec 2012 by Claggy Post: I'm using 7.0.31, Mas OS 10.8.2. The GPU app is Einstein@Home. There's an ongoing discussion regarding that problem later in the thread: Message 120740 Claggy |
563)
Message boards :
GPUs :
GPU won't stop when computer not idle
(Message 46848)
Posted 18 Dec 2012 by Claggy Post: I'm using 7.0.31, Mas OS 10.8.2. The GPU app is Einstein@Home. Add your feedback at Einstein in this thread: BRP4 1.31/1.32 GPU app release: feedback thread Claggy |
564)
Message boards :
News :
Fullscreen text-based user interface for Linux released
(Message 46786)
Posted 13 Dec 2012 by Claggy Post: Thanks. Claggy |
565)
Message boards :
News :
Fullscreen text-based user interface for Linux released
(Message 46776)
Posted 13 Dec 2012 by Claggy Post: Fullscreen text-based user interface for Linux r... David, can you update the forum code so the thread titles are not truncated, it has been done for Seti, Seti Beta and Einstein, but has not been applied here. Claggy |
566)
Message boards :
Questions and problems :
BOINC on ARM devices (round 2)
(Message 46705)
Posted 10 Dec 2012 by Claggy Post: (I'm eagerly awaiting the Parallella to see if its able to be used as a crunching device, but in the meantime I'd kind of like to try something else.) Count on some sort of Crunching being available, a number of the Devs, Mods and Alpha Testers (myself included) have ordered Parallellas Claggy |
567)
Message boards :
Questions and problems :
Problem with BOINC and Quicktime
(Message 46699)
Posted 10 Dec 2012 by Claggy Post: Update to a Release Build, Boinc 7.0.8 was a very early Alpha Build, then see if the problem is still there. Claggy |
568)
Message boards :
Questions and problems :
Boinc killed my PC
(Message 46693)
Posted 9 Dec 2012 by Claggy Post: What cooling do you have?, Is it a Stock cooler, or Heavy duty aftermarket job? Have you been monitoring temperatures? When you said you changed a preference from 20% to 100%, was that for the 100% of CPUs to be used, or for 100% of CPU time to be used (this preference is only really used to limit temperatures if the cooling is marginal) Does the PC now boot now it's cooled down (I've had this problem when my H80 wasn't circulating properly) Claggy |
569)
Message boards :
Questions and problems :
Boinc killed my PC
(Message 46686)
Posted 9 Dec 2012 by Claggy Post: What Power Supply are you using? It's the most important thing you haven't mentioned. Claggy |
570)
Message boards :
BOINC client :
BOINC 7.0.40 Intel GPU test project?
(Message 46672)
Posted 8 Dec 2012 by Claggy Post: When using coproc_debug and there is no Intel GPU, there is also no mention of not finding an intel library, like it does for Nvidia and ATI/AMD GPUs: 08/12/2012 23:38:21 | | Starting BOINC client version 7.0.40 for windows_x86_64 08/12/2012 23:38:21 | | log flags: file_xfer, sched_ops, task, coproc_debug, cpu_sched, dcf_debug 08/12/2012 23:38:21 | | log flags: sched_op_debug 08/12/2012 23:38:21 | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6 08/12/2012 23:38:21 | | Data directory: C:\ProgramData\BOINC 08/12/2012 23:38:21 | | Running under account Stephen 08/12/2012 23:38:21 | | Processor: 2 GenuineIntel Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz [Family 6 Model 23 Stepping 6] 08/12/2012 23:38:21 | | Processor: 3.00 MB cache 08/12/2012 23:38:21 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 syscall lm vmx tm2 pbe 08/12/2012 23:38:21 | | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00) 08/12/2012 23:38:21 | | Memory: 4.00 GB physical, 8.00 GB virtual 08/12/2012 23:38:21 | | Disk: 55.80 GB total, 28.18 GB free 08/12/2012 23:38:21 | | Local time is UTC +0 hours 08/12/2012 23:38:21 | | NVIDIA GPU 0: GeForce 8400M GS (driver version 310.54, CUDA version 5.0, compute capability 1.1, 128MB, 44MB available, 38 GFLOPS peak) 08/12/2012 23:38:21 | | OpenCL: NVIDIA GPU 0: GeForce 8400M GS (driver version 310.54, device version OpenCL 1.0 CUDA, 128MB, 44MB available) 08/12/2012 23:38:21 | | NVIDIA library reports 1 GPU 08/12/2012 23:38:21 | | No ATI library found. Claggy |
571)
Message boards :
BOINC client :
BOINC 7.0.40 Intel GPU test project?
(Message 46669)
Posted 8 Dec 2012 by Claggy Post: I've seen at least one other typo like that looking through the changenotes, that Bug might have already been fixed with: Changeset 5c1367e in boinc Claggy |
572)
Message boards :
Questions and problems :
Every time I turn off my computer I lose all my progress in my work units
(Message 46637)
Posted 8 Dec 2012 by Claggy Post: On what project is this on?, using which app?, does this app checkpoint?, ask at the project in question. Claggy |
573)
Message boards :
Questions and problems :
Network Connections
(Message 46615)
Posted 5 Dec 2012 by Claggy Post: Seti has been down since last week, No-One has been able to get new work from Set until today, and even then it'll be hit or miss if you can connect for the next day or so, Claggy |
574)
Message boards :
BOINC Manager :
Windows 8 support?
(Message 46488)
Posted 27 Nov 2012 by Claggy Post: Does anyone know if the current version of BOINC (7.0.28 x64) supports Windows 8? Yes, althrough Boinc 7.0.30 has further fixes, but since that was retracted, best to install Boinc 7.0.38, links are in the Boinc 7 Changelog thread, Claggy |
575)
Message boards :
Questions and problems :
Can't add cosmology@home
(Message 46467)
Posted 24 Nov 2012 by Claggy Post: I'm running seti and einstein projects. Added climateprediction.net today. Tried to add Cosmology, but it then said an account with that email address already exists and uses a different password ... ? Go to Cosmology's site, click on the Your Account Link, then click on 'forgot password?' link, enter your email address, and follow the instructions for resetting your password, Claggy |
576)
Message boards :
Questions and problems :
Comment on BOINC 7
(Message 46462)
Posted 24 Nov 2012 by Claggy Post: From the BoincFAQ Boinc 7 page: In finer detail Claggy |
577)
Message boards :
Questions and problems :
BOINC under Linux. It only identify all my Linux installations as 32 Bits.
(Message 46461)
Posted 24 Nov 2012 by Claggy Post: Please post the Boinc startup messages from the Event Log from one of your 64bit Linux hosts, the the first 20 to 30 lines will do, Claggy |
578)
Message boards :
Questions and problems :
Boinc does not want use all GPU. cc_config doesn't help
(Message 46388)
Posted 20 Nov 2012 by Claggy Post: I found it sorry... I will insert the file there and see what happens. Did Mimi Koko say to use UPPER CASE characters?, he did not. Claggy |
579)
Message boards :
Questions and problems :
Boinc does not want use all GPU. cc_config doesn't help
(Message 46387)
Posted 20 Nov 2012 by Claggy Post: I found a folder at No, that's the 'world community grid' project folder, the cc_config.xml just needs to go in the Boinc Data Directory, that is: C:\ProgramData\BOINC The cc_config file is the Core Client Config file, it's ment to configure Boinc, not a particular project. Claggy |
580)
Message boards :
Questions and problems :
Boinc does not want use all GPU. cc_config doesn't help
(Message 46383)
Posted 20 Nov 2012 by Claggy Post: I don't see any "Data" folder under BOINC... sorry if my answer has already been answered somewhere else... I did not find it and I am somewhat new to this.. The location of the Boinc Data directory is in the startup log, something like on the 5th or 6th line, Claggy |
581)
Message boards :
GPUs :
Incorrect GPU detection
(Message 46350)
Posted 18 Nov 2012 by Claggy Post: I found that when running a Host (on Windows) with a Nvidia GPU and a ATI/AMD GPU, that i have to extend the desktop onto the ATI/AMD GPU to get it detected, after that everything works fine, Claggy |
582)
Message boards :
Questions and problems :
CPU and GPU goes cold
(Message 46327)
Posted 16 Nov 2012 by Claggy Post: i have a WU waiting to run but only 7 cores being utilized ( this may be due to the WU in panic mode) You're using Local Preferences from Boinc Manager, these overide Web Preferences, go into Boinc Manager, and Tools, computing preferences and press Clear, then you'll revert back to using preferences from BAM. Claggy |
583)
Message boards :
Questions and problems :
CPU and GPU goes cold
(Message 46322)
Posted 16 Nov 2012 by Claggy Post: Hi Yes, But we need a few more lines of it, Claggy |
584)
Message boards :
Questions and problems :
CPU and GPU goes cold
(Message 46319)
Posted 16 Nov 2012 by Claggy Post: Please post your Boinc startup messages from the Event Log, up until the Wu's start, Claggy |
585)
Message boards :
Questions and problems :
BOINC 'suspened' but progress bar keeps moving
(Message 46309)
Posted 16 Nov 2012 by Claggy Post: Thanks for the info! Both your cards? Only One is being reported: Computer 6821378 Coprocessors NVIDIA GeForce GTX 560 Ti (1023MB) driver: 306.97 Boinc will only use the most capable card by default, the other one will be stated as 'Not Used' in the startup messages, to utilise both you'll need to make a cc_config.xml with the following in it, drop it in your Boinc Data directory (the location is in your Boinc startup messages and is likely hidden), and restart Boinc: <cc_config> <options> <use_all_gpus>1</use_all_gpus> </options> </cc_config> Client configuration Claggy |
586)
Message boards :
Questions and problems :
Problem with Getting New Tasks
(Message 46289)
Posted 15 Nov 2012 by Claggy Post: Best to ask at Seti in the Number Crunching Forum, then we can see what host you have, when it managed to connect last, and what tasks you have, Claggy |
587)
Message boards :
Questions and problems :
BOINC 'suspened' but progress bar keeps moving
(Message 46288)
Posted 15 Nov 2012 by Claggy Post: eh? no responses? :P Simple, you're running Buggy Nvidia Graphics drivers: http://setiathome.berkeley.edu/result.php?resultid=2705433362 setiathome_CUDA: No CUDA devices found 295.xx and 296.xx drivers have a Sleeping Monitor Bug, once the Monitor goes to sleep the Cuda device disappears, when the next Wu starts because the cuda device isn't available the Cuda app goes into CPU fallback mode and takes forever to complete a Wu, quite often doing Maximum Time Exceeded, eithier run 290.xx or earlier drivers, or 301.xx and later drivers, I did have a sticky post on the Seti Number Crunching Forum, but it's been replaced by one by Richard: NVidia driver problems which cause computation errors Claggy |
588)
Message boards :
Questions and problems :
BOINC 'suspened' but progress bar keeps moving
(Message 46271)
Posted 14 Nov 2012 by Claggy Post: eh? no responses? :P With which one of their apps? the Cuda_fermi 6.10 MB app or the OpenCL 6.04 AP app?, or are you running anonymous platform with one of a dozen or so other Cuda apps? Can we have a link to your host at Seti as there are no users called Siroaf there. Claggy |
589)
Message boards :
Questions and problems :
CPU and GPU goes cold
(Message 46256)
Posted 13 Nov 2012 by Claggy Post: Boinc 7 has a new rewritten scheduler, from the Boincfaq entry for Boinc 7: The CPU and GPU schedulers have been rewritten from the ground up, as is the new work fetch module. This means that work fetch will happen completely different from how you're used to it in BOINC 6. Where BOINC 6 would for instance report work and immediately ask a new task, BOINC 7.0 will try to store a couple of "ready to report" results, report them and immediately request work only when BOINC is under the value set by the Minimum work buffer. Claggy |
590)
Message boards :
BOINC Manager :
Boinc.SlackBuild successful
(Message 46247)
Posted 12 Nov 2012 by Claggy Post: Ok thanks, will try to make that work. You're got to post to the thread, not to a reply to an existing post. Claggy |
591)
Message boards :
Questions and problems :
BOINC 'suspened' but progress bar keeps moving
(Message 46246)
Posted 12 Nov 2012 by Claggy Post: eh? no responses? :P At what projects? with which of their apps? Best to ask at those projects. Claggy |
592)
Message boards :
BOINC Manager :
Boinc.SlackBuild successful
(Message 46238)
Posted 11 Nov 2012 by Claggy Post: My Boinc.SlackBuild is complete and running stable. It builds on 13.37 and 14.0 :) I have made a few changes to how it operates so make sure the have a look at the README. That would be you since you're the Originating Poster, To do it, post to the thread, then edit the post and change the title, Also made your link active. Claggy |
593)
Message boards :
Projects :
No Seti Processing graphic in my screensaver.
(Message 46235)
Posted 10 Nov 2012 by Claggy Post: Have you actually got any CPU 6.03 tasks on the host at the moment? the 6.08/6.09/6.10 GPU apps don't display on the screensaver. Claggy |
594)
Message boards :
Questions and problems :
New Linux clients aren't taking jobs
(Message 46218)
Posted 6 Nov 2012 by Claggy Post: Computing preferences are eithier set at one of your projects, for instance at the Computing preferences at PrimeGrid, these are a Global preference, you only need to apply them at one project, they then affect all your projects, note: you have four available sets of computing preferences (default, home, school and work), so you can tailer you're preferences to your hosts, you just have to move the host to the right venue, Or you can use Local Preferences from within Boinc Manager, these overide your Web based Computing preferences, but since you're seem to be using Computing Preferences from http://bam.boincstats.com you should adjust them there: 05-Nov-2012 19:52:07 [---] General prefs: from http://bam.boincstats.com/ (last modified 29-Oct-2012 12:26:38) Claggy |
595)
Message boards :
Questions and problems :
New Linux clients aren't taking jobs
(Message 46211)
Posted 6 Nov 2012 by Claggy Post: Im out of idea's, anyone care to take a stab at it? You're run out of disk space, change your computing preferences to allocate some more, there are three preferences that could be limiting disk usage: Disk: use at most 10 GB Disk: leave free at least Values smaller than 0.001 are ignored 0.1 GB Disk: use at most 50% of total Try increasing the 'Disk: use at most' to 20 GB first, then increasing the 'Disk: use at most' to 60% of total. Edit: and while you're at it i'd upgrade all those hosts away from Boinc 6.10.45, that was still a Buggy Alpha release, better to use 6.10.58 or 6.10.60 Minimum. Claggy |
596)
Message boards :
Questions and problems :
WinXP 32/AMD HD5800 GPU
(Message 46200)
Posted 4 Nov 2012 by Claggy Post: OpenCL and CAL support has been deprecated from drivers later than Cat 12.1 for Windows XP, see Hal6000's ATI Driver Version Cheat Sheet So install drivers no later than Cat 12.1 Claggy |
597)
Message boards :
Questions and problems :
Cross project stats and links missing from Project Account pages
(Message 46195)
Posted 3 Nov 2012 by Claggy Post: O.K, thanks for that, Claggy |
598)
Message boards :
Questions and problems :
Cross project stats and links missing from Project Account pages
(Message 46193)
Posted 3 Nov 2012 by Claggy Post: I thought it is produced by one of the Boinc servers, by Issac if i'm not mistaken. Claggy |
599)
Message boards :
Questions and problems :
Cross project stats and links missing from Project Account pages
(Message 46191)
Posted 3 Nov 2012 by Claggy Post: On all my projects the different project stats and links to the other projects are missing at the moment, Claggy |
600)
Message boards :
Questions and problems :
Disabling GPU usage
(Message 46168)
Posted 30 Oct 2012 by Claggy Post: Boinc only suspends CPU or GPU usage for an hour when suspending usage via the tray icon, Eithier suspend GPU usage via the activity menu, or use the <exclusive_gpu_app> option to suspend GPU usage when a particular app runs: Client configuration Claggy |
601)
Message boards :
Questions and problems :
Memory usage oveload
(Message 46162)
Posted 30 Oct 2012 by Claggy Post: What Boinc version is this on? Claggy |
602)
Message boards :
BOINC Manager :
BOINC for Android
(Message 46127)
Posted 25 Oct 2012 by Claggy Post: Have been running nativeboinc on a quad core ODROID-x for a few days. Simple, the WUProp task is a nci task (that means non computational/CPU intensive, ie it basically doesn't use the CPU much): WUProp@home Applications Made your link active, so people don't have to jump through hoops to look at it, in future just highlight the link, and click the URL Box. Claggy |
603)
Message boards :
Questions and problems :
BOINC 7.0.25 High Priority Probelms
(Message 46123)
Posted 25 Oct 2012 by Claggy Post: Computing preferences is a Global preference, you only need to set it at one project, once Boinc contacts that project it'll update it's global preferences file, Once Boinc contacts all your other projects, it'll update them with the latest preferences, Edit: typo's edited out, Thanks. Claggy |
604)
Message boards :
Questions and problems :
BOINC 7.0.25 High Priority Probelms
(Message 46114)
Posted 25 Oct 2012 by Claggy Post: What are your cache settings? Claggy |
605)
Message boards :
Questions and problems :
Screensaver
(Message 45969)
Posted 13 Oct 2012 by Claggy Post: Also is there any other screensaver graphics we can use other than the default one that is loaded when you install BOINC? If you attach to projects like CPDN, Setiathome or Einstein you get their screensavers as well as the default Boinc screensaver, Claggy |
606)
Message boards :
Questions and problems :
Custom 2 core vs 4 core option?
(Message 45967)
Posted 13 Oct 2012 by Claggy Post: See this recent thread: Different settings for while computer is in use and idle Claggy |
607)
Message boards :
Questions and problems :
Two AMD Computer has Problems with GPU
(Message 45930)
Posted 9 Oct 2012 by Claggy Post: 09.10.2012 12:13:32 | | Running as a daemon You're installed as a service (protected application installation), uninstall Boinc and reinstall, this time don't tick the protected application installation box in the advanced options, Claggy |
608)
Message boards :
Questions and problems :
Two AMD Computer has Problems with GPU
(Message 45928)
Posted 9 Oct 2012 by Claggy Post: Post your Boinc startup messages from the message tab or the event log for one of your hosts, the first 20 to 30 lines will do, Claggy |
609)
Message boards :
Projects :
SETI/BOINC problems or outage?
(Message 45851)
Posted 1 Oct 2012 by Claggy Post: The Setiathome download link is almost always under very heavy load, you'll just have to hit retry every now and again (Boinc 6.12.x and 7 also has extended backoffs so to not a denial of service of the download link): Weekly Graphs for gigabitethernet2_3 Claggy |
610)
Message boards :
Questions and problems :
BOINC Manager does'nt run multitask
(Message 45850)
Posted 1 Oct 2012 by Claggy Post: What cache settings are you running? the server's scheduler will fill up the cache with work for fastest device first, ie the GPU, once that's full then it'll send work for the CPU, you can fix this by lowering the cache settings until Boinc stops asking for GPU work, Claggy |
611)
Message boards :
Questions and problems :
Windows 7x64 Logon Screen (in Domain) problem with Boinc
(Message 45830)
Posted 28 Sep 2012 by Claggy Post: It is the last version of Boinc. Do you mean the last version of Boinc released, which will be 7.0.36, or do you mean not the latest, but the last one released, which will be 7.0.35, or do you mean the latest recommended, which will be Boinc 7.0.28, or the last recommended which will be 7.0.25, or do mean the last 'version' which will be Boinc 6.12.43, or the last recommended 'version' which will be 6.12.34, saying the last or the latest means different things to different people, please say the version number, Claggy |
612)
Message boards :
GPUs :
Question regarding Radeon HD 5450
(Message 45771)
Posted 24 Sep 2012 by Claggy Post: 24/09/2012 4:36:14 PM | | Processor: 1 AuthenticAMD AMD Athlon(TM) XP 2200+ [Family 6 Model 8 Stepping 0] You'll never get OpenCL support with an ATI/AMD GPU as a CPU with SSE2 support is required first, try Cat 11.1 then at least CAL will work. Nvidia GPUs don't require an SSE2 processor, so OpenCL support is shown, but that doesn't improve matters as the one developer who tried to build an SSE OpenCL app couldn't get it to work, my SSE only XP3200+ host: 15/09/2012 11:30:00 | | NVIDIA GPU 0: GeForce GT 430 (driver version 301.42, CUDA version 4.20, compute capability 2.1, 512MB, 484MB available, 269 GFLOPS peak) Claggy |
613)
Message boards :
GPUs :
Question regarding Radeon HD 5450
(Message 45765)
Posted 24 Sep 2012 by Claggy Post: Also possible that one just needs the AMD Stream SDK installed in order for the CAL detection to work.That might be true. My XP3200+/AGP_HD4650/PCI_8400GS is stuck on Cat 11.1 drivers, AGP drivers after that stuck the resolution at 640*480 and 4bit colour, once that was fixed and i could install a driver properly, then Boinc wouldn't detect the HD4650 anymore, i suppose the lack of an SSE2 processor stopped the SDK runtime getting installed, when i have a free moment i'll try Cat 12.1 and see what is installed, and whether Boinc detects the HD4650. Claggy |
614)
Message boards :
Questions and problems :
Why does Boinc Manager screen open when I start Win XP?
(Message 45754)
Posted 23 Sep 2012 by Claggy Post: Have you got a Boinc Manager link in your startup folder?, if you have, you can remove it, What version of Boinc is this on? Claggy |
615)
Message boards :
Questions and problems :
BOINC 7 not getting tasks
(Message 45743)
Posted 22 Sep 2012 by Claggy Post: Sorry, I don't know what NNT is. No New Tasks. Claggy |
616)
Message boards :
Questions and problems :
BOINC 7 not getting tasks
(Message 45740)
Posted 21 Sep 2012 by Claggy Post:
Forget about tasks running High Priority, that's what happens if tasks are in deadline trouble, not what we're talking about here, We're talking about which project has priority for asking for work, the three red projects don't have priority, that must mean one of the others does have priority, make sure none are set NNT or Suspended, What asks for work first? It could be Spinhenge's turn and is so blocking the other projects from asking: 19/09/2012 14:58:17 | rosetta@home | URL http://boinc.bakerlab.org/rosetta/; Computer ID 1445815; resource share 100 Claggy |
617)
Message boards :
Questions and problems :
BOINC 7 not getting tasks
(Message 45715)
Posted 19 Sep 2012 by Claggy Post: Link to host - is this what you mean? No, i mean like this, this is one of my hosts at Einstein: http://einstein.phys.uwm.edu/show_host_detail.php?hostid=2355855 From this i can see i've got a Quota of 32 tasks a day, and can see what tasks i've done recently, if the errored, and i can see a few details about the computer, and what projects the computer might be attached to. So what other projects is that host attached to? If LHC@home 1.0, Cosmology@Home and Einstein@Home aren't highest priority, then that must mean another project is highest priority, is it eithier set to No New Tasks, Suspended, or asking for work and not getting any? Please post the startup logs of your host. Claggy |
618)
Message boards :
GPUs :
2 gpus, 1 stopped workin
(Message 45705)
Posted 18 Sep 2012 by Claggy Post: I got 3 NVIDIA GPUs and only 1 GPU is running at a time. Please post your Boinc startup messages, the first 20 to 30 lines will do. Claggy |
619)
Message boards :
GPUs :
2 gpus, 1 stopped workin
(Message 45704)
Posted 18 Sep 2012 by Claggy Post: Claggy Boinc 7.0.36 is basically an Alpha build at the moment, so doesn't show on the downloads yet, But the links have been posted in the BOINC 7 Change Log and news thread, One thing to note is that the internal flops figure for the GPU has been increased by 10 times, because of this existing GPU work will all be on the edge of erroring out with maximum time exceeded, so your Cache should be run down of all GPU work prior to upgrading to Boinc 7.0.33 or later, you can do this by eithier setting NNT at all your GPU projects, or unsetting Use Nvidia GPU or Use ATI GPU at all your GPU projects, Once you're run your GPU cache down, upgraded to Boinc 7.0.36, you can then re-enabled work fetch again, Claggy |
620)
Message boards :
GPUs :
2 gpus, 1 stopped workin
(Message 45679)
Posted 17 Sep 2012 by Claggy Post: His GPUs are showing signs of the Wacky Nvidia GPU Memory Bug, Since his available GPU Memory is substantially different, only one GPU will be used: 16/09/2012 1:46:17 PM | | NVIDIA GPU 0: GeForce GTX 580 (driver version 306.23, CUDA version 5.0, compute capability 2.0, 3072MB, 8383134MB available, 1581 GFLOPS peak) As this post shows why: He could upgrade to Boinc 7.0.36, that has a partial fix.As Richard Haselgrove already pointed out... (I didn't scroll down the whole way before I answered ;)) Claggy |
621)
Message boards :
GPUs :
2 gpus, 1 stopped workin
(Message 45669)
Posted 16 Sep 2012 by Claggy Post: What does the Boinc startup messages say? first 20 to 30 lines will do. (Ctrl+Shift+E to bring up the Event log) Claggy |
622)
Message boards :
Questions and problems :
I wanted to upgrade to the latest versin of BOINC
(Message 45663)
Posted 16 Sep 2012 by Claggy Post: See this BoincFaq entry for further info: Windows Installer Error 1706: Setup cannot find the required files / 1714: older version cannot be removed / BOINC.msi cannot be found / The feature you are trying to use is on a network resource that is unavailable / Error 1325. is not a valid short name Claggy |
623)
Message boards :
Questions and problems :
CPU usage too high
(Message 45660)
Posted 16 Sep 2012 by Claggy Post: damn. i forgot how to get into those. Go to the Seti site, click on one of the links that says 'Account' or 'Your Account', then click on the Computing Preferences link. Claggy |
624)
Message boards :
Questions and problems :
BOINC on ARM devices (round 2)
(Message 45653)
Posted 15 Sep 2012 by Claggy Post: I was thinking of getting the SETI Multibeam app down and doing a Make and Configure on it. The question is to where to get it? I have seen the nightly tar balls. The Pi only seems to have 70mb free Probably from the Web Interface: https://setisvn.ssl.berkeley.edu/trac/browser# I think you'll need to look in branches > sah_v6 > seti_boinc AKv8b2 Sources are here: http://lunatics.kwsn.net/index.php?module=Downloads;catd=2 Claggy |
625)
Message boards :
GPUs :
Is there any non-beta research project for ATI\AMD gpu cards?
(Message 45642)
Posted 13 Sep 2012 by Claggy Post: PrimeGrid also has an OpenCL ATI/AMD app for their Proth Prime Search (Sieve) search, Claggy |
626)
Message boards :
GPUs :
Is there any non-beta research project for ATI\AMD gpu cards?
(Message 45637)
Posted 13 Sep 2012 by Claggy Post: Check out the Choosing Boinc Projects page for projects that say (AMD/ATI GPU), Shame there's no 'last updated statement on that page' or look at the Project list page on the wiki site, (last updated 6 October 2011) In both cases you'll have go and look at the Applications page of any project you're interested in to see if they're developed AMD/ATI apps in the mean time. Claggy |
627)
Message boards :
Questions and problems :
BOINC on ARM devices (round 2)
(Message 45625)
Posted 12 Sep 2012 by Claggy Post: Radioactive@home has produced an app for Raspberry Pi running Raspbian. Raspberry Pi support Claggy |
628)
Message boards :
Questions and problems :
How to increase work activity
(Message 45605)
Posted 9 Sep 2012 by Claggy Post: Increase cache size to something like 3 + 0.01 Days (this a suitable setting for Boinc 7) Run the Lunatics Optimised apps. Claggy |
629)
Message boards :
BOINC client :
BOINC on the Raspberry Pi
(Message 45603)
Posted 9 Sep 2012 by Claggy Post: When I get some free time I will see if I can grab the source to SETI Multibeam and compile it. The Pi come preloaded with GCC 4.6. There's the AKv8 sources too, i wonder if that's a step too far, Claggy |
630)
Message boards :
Questions and problems :
BOINC 7 not getting tasks
(Message 45589)
Posted 7 Sep 2012 by Claggy Post: Keith Jillings and Alex Boyce, you both might to try the latest Boinc 7.0.33, it will tell you why it's not requesting work, But because it also has a change to the (internal) GPU flops value that is reported to the scheduler you should complete any GPU work before upgrading, otherwise old GPU work will error with Maximum time exceeded, new GPU work will get revised rsc_fpops figures. http://boinc.berkeley.edu/dl/boinc_7.0.33_windows_intelx86.exe http://boinc.berkeley.edu/dl/boinc_7.0.33_windows_x86_64.exe Can you also post links to your host at one of your projects please. Claggy |
631)
Message boards :
Questions and problems :
BOINC doesn't suspend when computer in use
(Message 45579)
Posted 6 Sep 2012 by Claggy Post: Boinc doesn't suspend work while computer is on battery Make sure you haven't got the activity menu set to 'Run always' and that boinctray is actually running in Task Manager. Claggy |
632)
Message boards :
Questions and problems :
i7-2720QM machine sent into cardiac arrest by BOINC
(Message 45540)
Posted 2 Sep 2012 by Claggy Post: I have an i7-2720QM, 8 gigs DDR3 memory since 4.28.11. Until about 4 weeks ago, this machine ran BOINC, 75% of cpu's 60% cpu time, just fine. Have you given it a spring clean yet? it doesn't take long for the CPU cooler to start accumalating dust, is it a Stock Cooler?, or an aftermarket Heavy Duty Cooler? Claggy |
633)
Message boards :
Questions and problems :
"work done for this project"
(Message 45539)
Posted 2 Sep 2012 by Claggy Post: Best to ask at Rosetta, this is the Boinc Message Boards, it is not a project, we can see none of your stats here, for all we know it's for a discontinued app, I'm not even going to try and look through every David's profile at Rosetta, there's going to be dozens, I'll also point you to the When requesting help on these forums... , especially this bit: Your system isn't registered at the BOINC project, so we cannot look it up and check what it's doing. It's only registered at the projects you added. We can only check what is wrong with it when you give us a link to its hostID number, as long as the system isn't hidden Claggy |
634)
Message boards :
Projects :
I wish to prioritize my Favorite Project!
(Message 45520)
Posted 31 Aug 2012 by Claggy Post: You go to your favourite project, and change the resource share in the project preferences, where else? Initially yes, but next time you connected to the project it would change back, Claggy |
635)
Message boards :
Questions and problems :
BOINC doesn't suspend when computer in use
(Message 45519)
Posted 31 Aug 2012 by Claggy Post: Just nuked the prefs (after quitting). Check what cmdline parameters the Collatz app has been using, if any, they are highly configurable, the more extreme ones cause desktop lag, I for a long time was complaining about the Windows Collatz Cuda app not exiting when told to do so, Boinc then killed it 10 seconds later, Grab their OSX Cuda or OpenCL ATI app from their Power (Optimized) Applications page and see if you can adjust parameters to improve matters. Claggy |
636)
Message boards :
GPUs :
Nvidia GPUs
(Message 45489)
Posted 30 Aug 2012 by Claggy Post: Link to the host please. Claggy |
637)
Message boards :
Questions and problems :
Manager 7 + Ubuntu 12.04 = no advanced mode?
(Message 45426)
Posted 24 Aug 2012 by Claggy Post: Yeah, that's what it looks like for me too. Plus the project option to stop accepting work items doesn't do anything - BOINC keeps accepting new work items (though the menu does change to show the opposite option "allow new work items" or whatever it's called). Plus if I try to quit the BOINC Manager it just doesn't want to die, I have to kill it with fire. And then I have to kill the worker threads with sudo killall -u boinc. Setting 'No New Tasks' doesn't stop Boinc from accepting new work, what it does is stop Boinc from 'asking' for new work, if you don't ask for work, you shouldn't get it, But, Projects with older Boinc Server software like Einstein (you don't say whih project this is on) that have 'resend lost tasks' enabled, will resend the lost tasks even when you haven't asked for work, later revisions of the Boinc server software will only resend lost tasks if Boinc asks for it in the first place, Claggy |
638)
Message boards :
BOINC Manager :
BOINC for Android
(Message 45410)
Posted 22 Aug 2012 by Claggy Post: Thanks, downloaded and updated, Claggy |
639)
Message boards :
BOINC Manager :
BOINC for Android
(Message 45394)
Posted 21 Aug 2012 by Claggy Post: Now should be available. I was checking. Yep, page is available now, i had to restart my phone to get it to update the url on that, it's now running 0.4b, Claggy |
640)
Message boards :
BOINC Manager :
BOINC for Android
(Message 45356)
Posted 19 Aug 2012 by Claggy Post: Still getting an Krzyszp.info page, Claggy |
641)
Message boards :
BOINC Manager :
BOINC for Android
(Message 45354)
Posted 19 Aug 2012 by Claggy Post: Can't open the Binary download page: This domain name expired on Aug 19 2012 09:47AM Claggy |
642)
Message boards :
Questions and problems :
Help! Boinc has started so many threads the Windows GUI is not reponding!
(Message 45296)
Posted 15 Aug 2012 by Claggy Post: Every time I check, Taskmanager claims that 31 copies of seti6.09 are running. Each copy seems to be accessing between 72,000K and 85,000K of memory. What Nvidia GPU do you have?, How much Graphics Memory does it have?, What Nvidia Drivers are you running? The Setiathome project is down while it has a planned day long power outage, Claggy |
643)
Message boards :
Questions and problems :
Help! Boinc has started so many threads the Windows GUI is not reponding!
(Message 45289)
Posted 15 Aug 2012 by Claggy Post: Can you post your Boinc startup messages please, the first 20 to 30 lines will do, Claggy |
644)
Message boards :
GPUs :
gtx670 compatibility
(Message 45241)
Posted 12 Aug 2012 by Claggy Post: It would not run setiathome either but it did run gpugrid stuff and milkeway and prime (as I recall?). I only had it for 24 hours. Nothing to do with Nvidia's forum being down, It's just that the Cuda_fermi app (which is a Cuda 3.0 app) doesn't work with 304.xx Cuda 5.0 preview drivers, of cause you'd have known that if you had looked in Number Crunching at Seti wouldn't you?: GTX 680, NVIDIA drivers 304.48 (beta), CUDA 5.0 lead to Computation Error Claggy |
645)
Message boards :
Questions and problems :
a problem in BOINC 6 and 7
(Message 45224)
Posted 11 Aug 2012 by Claggy Post: You can't have the Data directory in the Program Files Directory, it has to outside it (for security reasons), Normally for XP it is: C:\Documents and Settings\All Users\Application Data\BOINC\ and will be a hidden directory: 10-Aug-2012 08:29:41 [---] No config file found - using defaults You should uninstall Boinc, Move your Boinc Data directory to somewhere outside the Program Files directory, then reinstall Boinc 7.0.28 using the Advanced menu to set the Data directory to it's new location. Claggy |
646)
Message boards :
Questions and problems :
Restore older gui to newer client?
(Message 45219)
Posted 10 Aug 2012 by Claggy Post: You just need a copy of boincmgr.exe and Boinc.dll from a Boinc 6.10.60 Installation, eithier over-write boincmgr.exe with the old version, or rename it so you can use eithier, Claggy |
647)
Message boards :
Questions and problems :
Unable to down load lastest 64bit bonic.
(Message 45208)
Posted 9 Aug 2012 by Claggy Post: Have you tried downloading the 64bit client with a different Browser, or with a Download Manager like Getright? Claggy |
648)
Message boards :
Questions and problems :
BOINC on ARM devices (round 2)
(Message 45148)
Posted 5 Aug 2012 by Claggy Post: Hi. So we still have package maintainers putting out Boinc 7.0.24, i wonder if it'll work any better under Raspbian than it did under Ubuntu 12.04: http://boinc.berkeley.edu/dev/forum_thread.php?id=7595#44299 http://boinc.berkeley.edu/dev/forum_thread.php?id=7687&nowrap=true#45005 Claggy |
649)
Message boards :
Questions and problems :
Processor does not report SSE3
(Message 45102)
Posted 29 Jul 2012 by Claggy Post: Prescott New Instructions (PNI) is also know as SSE3 http://en.wikipedia.org/wiki/SSE3 Claggy |
650)
Message boards :
Projects :
News on Project Outages
(Message 45098)
Posted 29 Jul 2012 by Claggy Post: Einsten and Albert@home both seem to be down, Claggy |
651)
Message boards :
BOINC Manager :
BOINC for Android
(Message 45096)
Posted 28 Jul 2012 by Claggy Post: I've today installed NativeBoinc on my HTC Desire, and attached it to PrimeGrid, 1st Wu is in progress, Great Work, http://www.primegrid.com/show_host_detail.php?hostid=274573 Claggy |
652)
Message boards :
Questions and problems :
Nvidia Quadro 600 not working
(Message 44970)
Posted 20 Jul 2012 by Claggy Post: Hello Ageless, sorry for the error in the name of Boinc !!! Looking on the Nvidia site, the latest driver for Win Server 2008 R2 is 295.73, there are later drivers for Win 7, but they might not be fully compatible with Win Server 2008 R2, Claggy |
653)
Message boards :
Questions and problems :
Nvidia Quadro 600 not working
(Message 44968)
Posted 20 Jul 2012 by Claggy Post: Is there another Graphics card in that host?, and is there a monitor connected to it? and one not connected to the Quadro 600? if so you might need to extend the display onto the Quadro 600 before Boinc will see it. Claggy |
654)
Message boards :
Questions and problems :
Got new work after last WU is over 80% finished
(Message 44879)
Posted 14 Jul 2012 by Claggy Post: And in that situation I "lost" minute, and if he has same CPu like me, he will return that result minute before me. So what? it doesn't matter if you return your result before or after his result, both are needed to validate the Workunit, and you'll both get credit, Claggy |
655)
Message boards :
Questions and problems :
BOINC 7 not getting tasks
(Message 44839)
Posted 11 Jul 2012 by Claggy Post: Hi, From the front page of the Setiathome project: Science Database Updates If you're having trouble getting work from a project, it's best that you ask at that project. Claggy |
656)
Message boards :
Questions and problems :
BOINC Not running Ubuntu 12.04
(Message 44832)
Posted 11 Jul 2012 by Claggy Post: Boinc 7.0.29 has an idle detection fix for Linux: Preliminary Change Log Windows & Linux 7.0.28 --> 7.0.29 Claggy |
657)
Message boards :
Questions and problems :
Can't get get Boinc to use hyperthreading on Debian
(Message 44739)
Posted 4 Jul 2012 by Claggy Post: 04-Jul-2012 16:31:28 [---] Reading preferences override file Try clearing your local preferences, Claggy |
658)
Message boards :
BOINC client :
Computation error
(Message 44666)
Posted 29 Jun 2012 by Claggy Post: First place to ask is at the Collatz Forums as it is their app, and it was only released three days ago, Claggy |
659)
Message boards :
Questions and problems :
Fresh Windows 7 Professional 64-bit. BOINC 7.0.25. Regedit "fix" didn't fix it.
(Message 44615)
Posted 23 Jun 2012 by Claggy Post: Did you try Boinc 7.0.28? Claggy |
660)
Message boards :
Questions and problems :
How to preserved BOINC data?
(Message 44611)
Posted 23 Jun 2012 by Claggy Post: Thanks for the message. Yes, it's the whole Boinc Data directory you need back up (including all sub folders), then reinstall Windows, restore the Boinc Data directory, then reinstall Boinc, pointing it at the Data directory location if you're moved it. (Boinc Manager is only part of Boinc, it's the GUI, it only displays/controls what the Boinc client is doing) Claggy |
661)
Message boards :
BOINC Manager :
A Few Questions
(Message 44594)
Posted 21 Jun 2012 by Claggy Post: 2. Is there a way to assign one project just the CPU, and another project the GPU? Like, let SETI@Home only use my CPU, and MilkyWay@Home use just my GPU? Deselect 'Use Nvidia GPU' in your Setiathome Project Preferences, and Deselect 'Use CPU' in your Milkyway Project Preferences, then click update for both projects, Claggy |
662)
Message boards :
Questions and problems :
BOINC not getting tasks, despite being below the low-water mark
(Message 44565)
Posted 20 Jun 2012 by Claggy Post: It's true that 7.0.28 is better than 7.0.25. But there is still some progress to do. Boinc 7 has a new scheduler, at the moment you're asking it to cache a maximum of 5 days work, once it gets that amount it won't ask for more until it gets down to the minimum of 2 days, Best to change your preferences to 4 days minimum, and 0.01 days additional, you'll get more frequent topups with that. Claggy |
663)
Message boards :
Questions and problems :
I've a lot of problems with the 7.0 task scheduler.
(Message 44549)
Posted 19 Jun 2012 by Claggy Post: Bernard 64250, What are your cache settings?, Boinc 7 has a totally new rewritten scheduler, the first preference is the minimum cache setting, and the second cache setting is the maximum cache setting, Boinc 7 will fill to the high cache setting, then wait to the low cache setting before asking for more work, for Boinc 6 you would have used 0.01 and 3, for Boinc 7 you should use 3 and 0.01, Claggy |
664)
Message boards :
Questions and problems :
GPU stopped working
(Message 44548)
Posted 19 Jun 2012 by Claggy Post: Have a read of this thread in the GPUs subforum: Debian/Ubuntu/Mint/Derivatives - GPU recognition fixes Claggy |
665)
Message boards :
Questions and problems :
GPU stopped working
(Message 44541)
Posted 18 Jun 2012 by Claggy Post: When requesting help on these forums... Claggy |
666)
Message boards :
BOINC Manager :
1 GPU only pleas
(Message 44535)
Posted 18 Jun 2012 by Claggy Post: Yes: Client configuration Claggy |
667)
Message boards :
GPUs :
GPU not maxing out, only at 4% - 25% peak on some projects
(Message 44531)
Posted 17 Jun 2012 by Claggy Post: You probably lost that work because there was no platform tag in your app_info, add the following line before the <plan_class> line: <platform>windows_intelx86</platform> and restart Boinc, if resend lost tasks is enabled at poem the server should resend those lost tasks, Claggy |
668)
Message boards :
GPUs :
GPU not maxing out, only at 4% - 25% peak on some projects
(Message 44529)
Posted 17 Jun 2012 by Claggy Post: app_info.xml and cc_config.xml both look fine, Does Boinc on startup show a line with the following?: Poem@Home | Found app_info.xml; using anonymous platform". Claggy |
669)
Message boards :
GPUs :
GPU not maxing out, only at 4% - 25% peak on some projects
(Message 44526)
Posted 17 Jun 2012 by Claggy Post: What are your contents of the cc_config.xml and app_info.xml? Claggy |
670)
Message boards :
GPUs :
GPU not maxing out, only at 4% - 25% peak on some projects
(Message 44521)
Posted 17 Jun 2012 by Claggy Post:
The one at the Bottom that says: GPU utilization factor of BRP apps GPU utilization factor of BRP apps Set it at 0.5 for two Wu's at one, 0.33 for 3 Wu's at once. Claggy |
671)
Message boards :
GPUs :
GPU not maxing out, only at 4% - 25% peak on some projects
(Message 44519)
Posted 17 Jun 2012 by Claggy Post: Where do I find the preferences to adjust for Einstein@home? I can't find them in the boinc manager. On Your Account page on the Einstein website, where it says Einstein@Home preferences. Claggy |
672)
Message boards :
Projects :
News on Project Outages
(Message 44509)
Posted 16 Jun 2012 by Claggy Post: Cas@Home is not online since any days. Read the post by ritterm. (only two posts before yours) Claggy |
673)
Message boards :
Questions and problems :
Ubuntu not using GPU?
(Message 44505)
Posted 15 Jun 2012 by Claggy Post: And it decided to work.,.. thanks though! Brilliant, Claggy |
674)
Message boards :
Questions and problems :
Ubuntu not using GPU?
(Message 44502)
Posted 15 Jun 2012 by Claggy Post: Please post your Boinc startup messages, the first 20 to 30 lines will do, Claggy |
675)
Message boards :
Questions and problems :
How to assign all GPUs to one project, and all CPUs to another
(Message 44490)
Posted 14 Jun 2012 by Claggy Post: See this thread for ideas for what to try: Enhancement request Claggy |
676)
Message boards :
Questions and problems :
Enhancement request
(Message 44489)
Posted 14 Jun 2012 by Claggy Post: You also have four different venues available, (ie, Default, Home, School and Work) and have four sets of Computing preferences available, as well as four sets of Project Preferences (at each separate project), so you can move your Laptop to a different venue and just make a separate set of preferences for that Laptop, ie, by setting Use NVIDIA GPU to 'No' at each of these projects. Claggy |
677)
Message boards :
Questions and problems :
Enhancement request
(Message 44476)
Posted 12 Jun 2012 by Claggy Post: Can already be done with Boinc 7 with the <exclude_gpu> cc_config option: Client configuration Claggy |
678)
Message boards :
BOINC client :
Stable BOINC for win8?
(Message 44441)
Posted 9 Jun 2012 by Claggy Post: There has been a version of Boinc compatible with Win 8 since around the 3rd May, see the BOINC 7 Change Log and news thread: Preliminary Change Log 7.0.26 --> 7.0.27: Claggy |
679)
Message boards :
Questions and problems :
Strange problem with dual core AMD system
(Message 44438)
Posted 9 Jun 2012 by Claggy Post: May i draw your attention to this thread, if you don't supply enough information you're unlikey to get many answers: Please post the the first 20 to 30 lines of the Boinc startup messages, Claggy |
680)
Message boards :
Questions and problems :
Strange problem with dual core AMD system
(Message 44436)
Posted 8 Jun 2012 by Claggy Post: May i draw your attention to this thread, if you don't supply enough information you're unlikey to get many answers: Which project(s) is this on? which app is it from that project?, maybe you're only got one task left, maybe one of your projects has misconfigured a single core app to be a multicore app, maybe Boinc 7 is configured to only use a small amount of memory and you haven't got enough to run two at once, maybe you're got a GPU and one of your projects needs a lot of a CPU core to feed that GPU. At the moment it's anybodies guess what the problem with your host is. Claggy |
681)
Message boards :
Questions and problems :
Strange problem with dual core AMD system
(Message 44434)
Posted 8 Jun 2012 by Claggy Post: May i draw your attention to this thread, if you don't supply enough information you're unlikey to get many answers: When requesting help on these forums... Claggy |
682)
Message boards :
Questions and problems :
SLI Windows 8
(Message 44389)
Posted 2 Jun 2012 by Claggy Post: 02/06/2012 01:14:33 | | NVIDIA GPU 0: GeForce GTX 460 (driver version 296.17, CUDA version 4.20, compute capability 2.1, 46080MB, 8377165MB available, 1048 GFLOPS peak) Please read the Sticky thread in Number Crunching at Seti, I didn't get the thread put there for everyone to ignore it: <core_client_version>7.0.28</core_client_version> Claggy |
683)
Message boards :
Questions and problems :
SLI Windows 8
(Message 44379)
Posted 1 Jun 2012 by Claggy Post: Post your Boinc 7.0.28 startup messages from the Event log please. Claggy |
684)
Message boards :
Projects :
News on Project Outages
(Message 44356)
Posted 29 May 2012 by Claggy Post: From the Setiathome front page: Planned Power Outage This will also include Seti Beta, and is likely to include the Boinc Domain too, Claggy |
685)
Message boards :
Questions and problems :
Disk space full but no tasks showing for some projects
(Message 44338)
Posted 28 May 2012 by Claggy Post: Complete what tasks you have at climate prediction, then reset the project, i think it is known to not clear out it's old files. Or increase the amount of disk space allocated, i have mine set at 100Gb, CPDN is only using ~1Gig at the moment, while Seti is 2Gig, Seti Beta 666Mb, and Einstein 638Mb. Claggy |
686)
Message boards :
Questions and problems :
App version needs OpenCL but GPU doesn't support it
(Message 44335)
Posted 28 May 2012 by Claggy Post: Are you also using the i5-2500K's Intel HD Graphics 3000 GPU for display? Earlier versions of Boinc 6.12.x (on Windows) had a problem with Dual Nvidia/Intel Laptops where Boinc couldn't get the driver version, It was fixed (at least on windows systems) by Jason G and Richard Haselgrove with this changeset: [trac]changeset:24046[/trac] Claggy |
687)
Message boards :
Questions and problems :
App version needs OpenCL but GPU doesn't support it
(Message 44332)
Posted 28 May 2012 by Claggy Post: all WU´s run fine, only the manager say no device...... Windows drivers since 197.xx have supported OpenCL, i have been running Raistmer's Nvidia OpenCL AP app for the last year, and Seti Beta now has the latest Nvidia AP app as a Stock app (all on Windows) Claggy |
688)
Message boards :
Questions and problems :
gpu missing error--Seti@Home
(Message 44326)
Posted 28 May 2012 by Claggy Post: Reset the project and get your Cuda workunits resent, Claggy |
689)
Message boards :
BOINC Manager :
starting boinc manually
(Message 44309)
Posted 27 May 2012 by Claggy Post: And what version of Boinc? On Boinc 6.10.x on Windows, go Advanced > Options and untick 'Run Manager at login?' On Boinc 6.12.x and later the same setting is in Tools > Options afterwards you need to fully shut down Boinc Manager otherwise the option won't set or unset. Claggy |
690)
Message boards :
Questions and problems :
wrong user and no team
(Message 44304)
Posted 27 May 2012 by Claggy Post: One of my machines shows the wrong user (Winter instaead of Aubuchon Family and no team (should be USA) for my Einstein@Home project. How do I change this? You need to go into your Einstein Community preferences and change the user number for your latest number, which you can get by following one of the Cross-project statistics links from Your account. Claggy |
691)
Message boards :
Questions and problems :
computation error
(Message 44186)
Posted 19 May 2012 by Claggy Post: It means the workunit didn't complete properly, Go and ask on whatever project the workunit was from, Claggy |
692)
Message boards :
Questions and problems :
BOINC network usage
(Message 44182)
Posted 19 May 2012 by Claggy Post: What does the message tab or event log say?, On Boinc 6.10.58 it works correctly: 19/05/2012 13:12:48 Suspending network activity - time of day 19/05/2012 13:13:01 Resuming network activity 19/05/2012 13:14:46 SETI@home Computation for task 13my10ae.22708.239.9.10.177_2 finished 19/05/2012 13:14:46 SETI@home [cpu_sched] Resuming 13my10ae.22708.239.9.10.165_2 19/05/2012 13:14:46 SETI@home Resuming task 13my10ae.22708.239.9.10.165_2 using setiathome_enhanced version 603 19/05/2012 13:14:49 SETI@home Started upload of 13my10ae.22708.239.9.10.177_2_0 19/05/2012 13:15:01 Suspending network activity - time of day Now my upload is suspended. Claggy |
693)
Message boards :
Questions and problems :
my boinc is broken
(Message 44115)
Posted 12 May 2012 by Claggy Post: I didn't know what other forum to post on, and I also don't know how to straight up contact someone FROM the BOINC project, so I'm just gonna go ahead and post here.What Boinc version is this On? Where is the Actitity Menu set to? is it set to 'Run based on preferences' or is is it set to 'Run always'? Where are you setting the restriction? at a Project's Computing Preferences page? or with Local Preferences? Local Preferences overide Web Preferences, Claggy |
694)
Message boards :
Questions and problems :
my boinc is broken
(Message 44055)
Posted 8 May 2012 by Claggy Post: Um, which version of Boinc is that? Claggy |
695)
Message boards :
BOINC client :
Why does the Installer for BOINC 7.0.27 require a full computer restart.
(Message 44020)
Posted 6 May 2012 by Claggy Post: Probably something to do with the Eight changesets marked 'Mac installer: changes for OS 10.8 compatibility': Trac timeline Claggy |
696)
Message boards :
Questions and problems :
Ubuntu Howto?
(Message 44018)
Posted 6 May 2012 by Claggy Post: The best I can get is 'Connecting to servers' and 'No work available to process' You don't say which project this is on, perhaps that project doesn't have any work to send out. Claggy |
697)
Message boards :
Questions and problems :
Windows 8 Consumer Preview and Boinc 7.0.25
(Message 43995)
Posted 5 May 2012 by Claggy Post: Unable to install boinc 7.0.25 with Windows 8 preview Consumer. From the changelog for Boinc 7.0.27: WINSETUP: Fix long standing installer bug where we were attempting to add the boinc_master account to the boinc_admins group when installing in the non-service install mode. boinc_master is only created during service installs. This was causing a setup failure on Windows 8. As far as I can tell it should have also been failing on Win7 and Win Vista. http://boinc.berkeley.edu/dev/forum_thread.php?id=6698 Claggy |
698)
Message boards :
Questions and problems :
very basic informaton for GPU processing
(Message 43994)
Posted 5 May 2012 by Claggy Post: Got the install done, but I'm getting computation errors. It looks like there is some trouble with ati V12.4 and lunatics, so I installed V12.1, and I'm still getting the problem. As a matter of protocol, is there a better place to ask about how to get these things talking to each other? You can't run OpenCL apps on your HD 2300/2400/3200 as it isn't supported, for OpenCL support you need a HD4300 or later GPU: System Requirements & Driver Compatibility http://setiathome.berkeley.edu/results.php?hostid=6560195&offset=0&show_names=1&state=0&appid= <stderr_txt> The only Seti ATI GPU app that you can run is the Brook Hybrid Astropulse app, ie AP6_win_x86_SSE_Brook_r555.exe Claggy |
699)
Message boards :
Questions and problems :
Select A Computer?
(Message 43413)
Posted 11 Apr 2012 by Claggy Post: Select A Computer? Here's the wiki entry for controlling remote computers: Controlling BOINC remotely Claggy |
700)
Message boards :
Questions and problems :
New scheduler issue
(Message 43386)
Posted 10 Apr 2012 by Claggy Post: What happens if you suspend enough GPU tasks so it stops running high priority? Claggy |
701)
Message boards :
Questions and problems :
New scheduler issue
(Message 43384)
Posted 10 Apr 2012 by Claggy Post: Is this proper on an 8-core host? What does the rest of the Status column say? all we can see is Running... or Waiting... Claggy |
702)
Message boards :
Questions and problems :
Suspending Issue
(Message 43364)
Posted 9 Apr 2012 by Claggy Post: It seems that the 7.0.23 Linux x86-64 client gets stuck into thinking that the computer is in use all the time, though on one there is no one logged on and on another it's being accessed via NX but its window is minimized. Try Boinc 7.0.25 instead now the links have been fixed, Claggy |
703)
Message boards :
Questions and problems :
Task runs 3 hrs, switch off computer, only 15 mins work shown
(Message 43351)
Posted 9 Apr 2012 by Claggy Post: Which project is this, does their app checkpoint often? Claggy |
704)
Message boards :
News :
BOINC 7.0 released to public
(Message 43349)
Posted 9 Apr 2012 by Claggy Post: A couple of issues: and the Mac OS X (Unix command-line version) points to 7.0.23 too, Claggy |
705)
Message boards :
Questions and problems :
Problem running Test4Theory
(Message 43340)
Posted 9 Apr 2012 by Claggy Post: The error message appears in the event log. I can't post it because it won't copy and paste from there. Select what lines you want to copy with the Shift and Alt Keys, then click the 'Copy Selected' button in the bottom right hand corner, and paste it into a post: 09/04/2012 19:24:21 | | Starting BOINC client version 7.0.25 for windows_x86_64 Claggy |
706)
Message boards :
Projects :
News on Project Outages
(Message 43258)
Posted 4 Apr 2012 by Claggy Post: The Boinc wiki is having problems: BOINC has a problem Claggy |
707)
Message boards :
Questions and problems :
Boincview remote host -- how to ?
(Message 43257)
Posted 4 Apr 2012 by Claggy Post: From the BoincFAQ site: How to control a remote host? and from the Boincwiki: Controlling_BOINC_remotely Claggy |
708)
Message boards :
Questions and problems :
reached daily quota 12
(Message 43252)
Posted 2 Apr 2012 by Claggy Post: The latest native boinc for freebsd now is 6.4.5_7 according to http://www.freshports.org/search.php?query=boinc-client&search=go&num=10&stype=name&method=match&deleted=excludedeleted&start=1&casesensitivity=caseinsensitive (it is upsetting :( ) Eithier get onto your packet manager to update boinc to a more recent version, Or go along to dotsch's site and get one of his more recent versions, Claggy |
709)
Message boards :
Questions and problems :
Boinc running only at 20%, why ?
(Message 43233)
Posted 1 Apr 2012 by Claggy Post: When requesting help... When you're requesting help on these forums, please, always be so kind as to give information about which BOINC version you run (See Help->About BOINC in BOINC Manager), about your system, the projects you are attached to and what you have done so far to try to remedy the problem. Claggy |
710)
Message boards :
Questions and problems :
Boinc running only at 20%, why ?
(Message 43228)
Posted 1 Apr 2012 by Claggy Post: What Boinc version are you running? You're running a non-CPU intensive app, and a Seti 6.03 CPU app, the Stock 6.03 CPU app has been known to stall on some CPUs (effectively meaning only the non-CPU intensive app is running), try restarting Boinc, Claggy |
711)
Message boards :
Questions and problems :
Project status = Suspended - Computer is not in use
(Message 43162)
Posted 25 Mar 2012 by Claggy Post: I am getting a status that is not expected. suspended while computer is not in use. my preferences are set to: Which Boinc version? Web or local preferences? What have you got the following Computing preference set to?: Suspend work if no mouse/keyboard activity in last --- minutes Needed to enter low-power mode on some computers Claggy |
712)
Message boards :
GPUs :
Will Change of Video Card Affect Work in Progress?
(Message 43158)
Posted 25 Mar 2012 by Claggy Post: In this case the proposed change is from a standard VGA adapter (Intel 82915Gx) to an NVIDIA/ZOTAC ION video card (512MB). It appears a change of this nature in midstream is not a good idea. I will hold up until the present work units are finished. Thanks to all for your help with this issue. If the change is from a GPU that isn't supported by Boinc to one that is, then there is no problem (as you won't have been crunching tasks on your GPU before), so just go ahead. Claggy |
713)
Message boards :
Questions and problems :
I'd like to build the ideal BOINC computer
(Message 43102)
Posted 17 Mar 2012 by Claggy Post: I posted somethin like this before.. Go and ask at your favourite project, this month it might be more cores, next month avx support, the month after the latest GPU and drivers, Claggy |
714)
Message boards :
Questions and problems :
Manager says "Task suspended" but is computing
(Message 43055)
Posted 16 Mar 2012 by Claggy Post: O.K, that'll do, what i wanted to see was your host ID, now i can see what GPU you have, how much RAM it has, and what drivers it has: Computer 6380347 You have a few things against you, you only have a GPU with 256Mb, the Seti app needs about 220Mb free RAM to operate, if there isn't enough it'll fall into CPU fallback mode, and basically use a core, this is what your tasks are doing: setiathome_CUDA: Found 1 CUDA device(s): I suggest you just don't do Cuda computation on your GPU unless you can free some GPU RAM up by disabling some Aero effects, Note: The 295.73 drivers have a Bug (I don't see any evidence of your host being effected through), when the Monitor connected to the DVI port goes to sleep the Cuda device becomes unavailable, if you get that output in your tasks, set your monitor not to sleep, and phyiscally turn it off, or downgrade your drivers 290.53 or earlier. Claggy |
715)
Message boards :
Questions and problems :
Manager says "Task suspended" but is computing
(Message 43051)
Posted 16 Mar 2012 by Claggy Post: Can you post your Boinc startup messages please, at the moment we don't know what sort of PC you have, what GPU you have, or even what Graphics drivers you're running, Claggy |
716)
Message boards :
Questions and problems :
GPU computation error
(Message 42955)
Posted 9 Mar 2012 by Claggy Post: By Running 295.73 drivers, once the monitor connected to the DVI port goes to sleep, the cuda device becomes unavailable, eithier run a 290.53 or earlier driver, or set the Monitor not to go to sleep, and physically turn it off, Claggy |
717)
Message boards :
Questions and problems :
Jack
(Message 42926)
Posted 7 Mar 2012 by Claggy Post: http://boinc.berkeley.edu isn't a project, it has not applications of any sort. Claggy |
718)
Message boards :
Questions and problems :
Communication Deferred errors
(Message 42908)
Posted 6 Mar 2012 by Claggy Post: Always, read the project forum first. Panic Mode On (70) Server problems? Claggy |
719)
Message boards :
Questions and problems :
Trying to run headless ...
(Message 42875)
Posted 5 Mar 2012 by Claggy Post: The Boinc Wiki supplies anything you should need to know about boinccmd: Boinccmd tool To attach to Seti do: boinccmd --project_attach http://setiathome.berkeley.edu account_key I you haven't got the account key handy get it by: boinccmd --lookup_account http://setiathome.berkeley.edu email_address password To attach to a new project do: boinccmd --create_account URL email password name Claggy |
720)
Message boards :
BOINC client :
multiple NVIDIA GPUs
(Message 42824)
Posted 2 Mar 2012 by Claggy Post: Any idea about this? Try Boinc 7.0.18, Boinc 7.0.2 ia a very early Alpha, Claggy |
721)
Message boards :
Projects :
News on Project Outages
(Message 42816)
Posted 1 Mar 2012 by Claggy Post: SETI recovered from the last one, but has another coming up. and Seti Beta too Claggy |
722)
Message boards :
GPUs :
Nvidia GPU Computation Errors after Driver Update
(Message 42772)
Posted 27 Feb 2012 by Claggy Post: With 295.xx drivers once the DVI connected Monitor goes to sleep the Cuda device becomes unavailable, eithier set the Monitor to never sleep, and physically turn it off instead (there are some reports that this works), or install 290.53 or earlier drivers, And please add a Bug report to the Official WHQL NVIDIA 295.73 Display Driver Feedback Thread For NVIDIA Geforce Desktop/Notebook/ION GPUs Released thread, Claggy |
723)
Message boards :
Questions and problems :
GPU Tasks quit with "Computational Error"
(Message 42756)
Posted 26 Feb 2012 by Claggy Post: Looking at your errored tasks at Milkyway, I'd say the first course of action is to try a repair install of Boinc 6.12.34 (just run the Installer and select repair), then if that doesn't help then reset both projects and see if that helps, Claggy |
724)
Message boards :
GPUs :
Powercolor 5750 GPU not working
(Message 42753)
Posted 26 Feb 2012 by Claggy Post: Is your problem that neither the powercolor nor the 12.1 ATI Catalyst will install? or something else? Just saying 'not working' doesn't really help, or did you manage to install one of the drivers, and it's Boinc that can't see the HD5750, If so then post your Boinc startup messages. Claggy |
725)
Message boards :
Questions and problems :
sigh... 20+ hours of work thrown out at shutdown
(Message 42751)
Posted 26 Feb 2012 by Claggy Post: The work around is to shut down Boinc before you shut down Windows, then the CPDN task is exited in a controlled manner. Claggy |
726)
Message boards :
Questions and problems :
task management is useless
(Message 42715)
Posted 23 Feb 2012 by Claggy Post: Looking at your tasks at Milkyway and Einstein shows only enough tasks for less than 4 hours, the amount of tasks you have for Seti is unknown with their task list disabled, Yes, you're using local preferences, if you go into them and press Clear, then yes, you'll revert to Web Preferences, it'll help you get some more work, Claggy |
727)
Message boards :
Questions and problems :
task management is useless
(Message 42713)
Posted 23 Feb 2012 by Claggy Post:
Looking at your tasks at Milkyway and Einstein shows only enough tasks for less than 4 hours, the amount of tasks you have for Seti is unknown with their task list disabled, Where did you set your 1 + 2 days cache settings? was it at one of the Projects? or in Boinc Manager?, Note that the Boinc Manager local preferences over-ride the Web Preferences, and you could only be running a couple of hours cache, Post your Boinc startup messages from the Event Log, then try clearing your local preferences, and see if Boinc 6.12.34 asks for more work. Claggy |
728)
Message boards :
Questions and problems :
task management is useless
(Message 42692)
Posted 22 Feb 2012 by Claggy Post: BOINC 6.12.34 Your computers are hidden at each project, i can't see what tasks you have on each host at each project. Claggy |
729)
Message boards :
Questions and problems :
task management is useless
(Message 42690)
Posted 22 Feb 2012 by Claggy Post: BOINC 6.12.34 For Example this is my main host at Seti and Einstein (I'm not attached to Milkyway): http://setiathome.berkeley.edu/show_host_detail.php?hostid=5427475 http://einstein.phys.uwm.edu/show_host_detail.php?hostid=2542754 at Einstein i can see what work you were last asking for, here i was only asking for CPU work (I've got Nvidia GPU work fetch disabled in my project preferences there): http://einstein.phys.uwm.edu/host_sched_logs/2542/2542754 Because you're only allowing downloads for 8 hours a day, you should have a cache setting of at least 1 day, 2 days would be better, any less than 0.66 cache will mean you'll run out of work before you're next allowing downloads, Claggy |
730)
Message boards :
Questions and problems :
task management is useless
(Message 42687)
Posted 22 Feb 2012 by Claggy Post: BOINC 6.12.34 Can we have links to the host at Einstein, Milkyway, and SETI please, What are your cache settings?, it it CPU tasks that your out of?, or Nvidia GPU tasks? or ATI GPU tasks?, any special project preferences set at any of those projects? Claggy |
731)
Message boards :
Questions and problems :
task management is useless
(Message 42685)
Posted 22 Feb 2012 by Claggy Post: I run 3 projects on BOINC - Einstein, Milkyway, and SETI. Yet my PC will be sitting here for over 9 hours with no WU to process. Looking at the Event Log a request to Einstein says I don't want any more tasks despite the fact I didn't have any, Milkyway said my PC was full up with tasks, and SETI doesn't have enough tasks to send anyway. What Boinc version? Claggy |
732)
Message boards :
Questions and problems :
Problem with the setting "Maintain additional tasks to keep busy for up to"
(Message 42661)
Posted 22 Feb 2012 by Claggy Post: Because of the way that I run my systems, 24 hours / day on weekends only, I have "Maintain additional tasks to keep busy for up to" set to a fractional setting of 0.01 days. BOINC totally ignores this, and I frequently get too much work so that I end up missing deadlines, unless I override and tell BOINC not to get tasks for projects. What version Boinc? what cache settings are you using? Claggy |
733)
Message boards :
Questions and problems :
Boinc no longer connects in protected (service) mode
(Message 42642)
Posted 20 Feb 2012 by Claggy Post: I'm having the same problem on Win7 on an ATI gfx card. How do I find my driver version? By opening Catalyst Control Centre and looking at the Software Version in the Information Section, the Catalyst version is what you're looking for, Claggy |
734)
Message boards :
Questions and problems :
Some HTTP error
(Message 42620)
Posted 19 Feb 2012 by Claggy Post: It could also be a routing problem with your ISP, try a different ISP, be it via WiFi Hotspot, 3G Dongle etc, or try a different DNS server, or Proxy Server, Claggy |
735)
Message boards :
Questions and problems :
My debian_linux SPARC box may be used for what project???
(Message 42617)
Posted 18 Feb 2012 by Claggy Post: Dotsch has many ports available on his site for Seti, including Linux SPARC: http://www.dotsch.de/boinc/SETI%40home%20applications.html Claggy |
736)
Message boards :
Questions and problems :
task management is useless
(Message 42541)
Posted 12 Feb 2012 by Claggy Post: Just increase the 'Computer is connected to the Internet about every x days' setting, while decreasing the 'Maintain enough work for an additional y days' setting, Boinc will then try and do and report the work x days before deadline, and will cache x + y days of work, (Note: this is for Boinc 6.12.x and earlier; Note 2: on some Projects the wording has changed in preparation for Boinc 7) Claggy |
737)
Message boards :
BOINC client :
7.0.14 ignores setting of change project every x minutes
(Message 42523)
Posted 11 Feb 2012 by Claggy Post: i think the 'Switch between tasks every 60 minutes' setting is a setting that stops Boinc switching too often, Not a compulsory you must switch every 60 minutes setting, if Boinc doesn't need to switch (because it's paying back debt) it won't, Claggy |
738)
Message boards :
Questions and problems :
calculation errors
(Message 42495)
Posted 8 Feb 2012 by Claggy Post: seti@home works again however i don't understand why as it doesn't use the gpu Because Seti doesn't have a Stock ATI app, you won't be able to use your ATI there until you're installed the third party Lunatics apps, Your host at Seti is erroring out it's Stock 6.03 Wu's with a -226 (too many exits) error: http://setiathome.berkeley.edu/results.php?hostid=6413123&offset=0&show_names=1&state=0&appid= Claggy |
739)
Message boards :
Questions and problems :
running 2 BOINCs ?
(Message 42473)
Posted 7 Feb 2012 by Claggy Post: What you should be able to do is start up a 2nd Boinc Manager, it'll connect to the 1st client, then use 'select computer' put in localhost:31417 and the gui_rpc password to connect it to the 2nd client, Claggy |
740)
Message boards :
BOINC Manager :
EXPLICIT installation instructions please
(Message 42468)
Posted 6 Feb 2012 by Claggy Post: Still can't connect using BOINC Manager from another host, but boinc_cmd is working fine, and all hosts are talking back to SETI and working on tasks. you need a remote_hosts.cfg file with the ip address or host name to allow a remote host to connect: Controlling BOINC remotely Claggy |
741)
Message boards :
GPUs :
Using GPU puts 1 CPU core (of 4) out of use
(Message 42395)
Posted 2 Feb 2012 by Claggy Post: If you're going to run an Boinc Alpha Client, then keep it up to date, these are all the fixes that have been applied since Boinc 7.0.3 was current: Preliminary Change Log 7.0.3 --> 7.0.4: Claggy |
742)
Message boards :
GPUs :
boinc_temporary_exit()
(Message 42394)
Posted 2 Feb 2012 by Claggy Post: No, it more likely an application problem with the capability of one of your GPU's, try disabling Boinc's use of each GPU in turn, and run a Wu on the ATI GPU that isn't disabled while watching GPU load with GPU-Z, then tell us which GPU works and which one doesn't. Client configuration Claggy |
743)
Message boards :
GPUs :
isn't GPU grid expecting a bit much
(Message 42384)
Posted 31 Jan 2012 by Claggy Post: Recommended GPUs for GPUGRID is Basically a GTS450 or higher: FAQ - Recommended GPUs for GPUGrid crunching Claggy |
744)
Message boards :
GPUs :
both gpus usable in SLI or Crossfire?
(Message 42370)
Posted 31 Jan 2012 by Claggy Post: slightly off this topic but i have a motherboard with a x16 and a x4 slot. Can i just bung a card into the 4x slot and boinc will use it's GPU even if i don't put a monitor on it. You'll have to do a few things before Boinc will see the 2nd GPU, 1st, install the drivers be it Nvidia or ATI, 2nd, Connect a Monitor, a Dummy Plug or Extend the Desktop onto the 2nd Display, 3rd, Now fire up Boinc, hopefully Boinc will now detect Both GPU's, If the GPU's are from the same Vendor, But different, Boinc will only use the most capable, so: 4th, if needed, make a cc_config.xml (using Notepad) with the following in it, drop it in your Boinc Data Directory (the location is in your startup messages, and is a hidden folder) and restart Boinc: <cc_config> <options> <use_all_gpus>1</use_all_gpus> </options> </cc_config> Claggy |
745)
Message boards :
Questions and problems :
Some HTTP error
(Message 42351)
Posted 29 Jan 2012 by Claggy Post: The version on this AMD pc is 6.10.17 works normally flawlessly. Didn't 6.10.17 have the DNS caching Bug?, you could try upgrading to the latest Boinc 6.10.x version (6.10.60) and see if that is any better. Claggy |
746)
Message boards :
Questions and problems :
Unknown problem
(Message 42222)
Posted 25 Jan 2012 by Claggy Post: Which project or projects do you run? Actually the latest 6.12 BOINC is 6.12.43 Claggy |
747)
Message boards :
GPUs :
Wrong GPU being declared Not Used
(Message 42190)
Posted 23 Jan 2012 by Claggy Post: Currently using version 7.0.8 of BOINC. I don't think the problem occurred when I had a secondary video card of a GT 220. and what happens when you install Boinc 7.0.11, the latest development version of Boinc? Claggy |
748)
Message boards :
BOINC client :
7.0.11 -- Incorrect GPU RAM size
(Message 42179)
Posted 22 Jan 2012 by Claggy Post: Check out trac, Charlie has been working on OpenCL detection on the Mac, have a look for mention of a scaling factor for AMD GPUs, where the reported GPU RAM amount is doubled because of a Bug, this scaling factor keeps getting removed then added again, you can try running the <coproc_debug>1</coproc_debug> logging flag in a cc_config.xml to see if you get any more info, then report your findings to the Boinc_alpha mailing list, you'll get a quicker response, Edit: the last change is [trac]changeset:25019[/trac] Claggy |
749)
Message boards :
BOINC client :
Backup projects
(Message 42174)
Posted 21 Jan 2012 by Claggy Post: Hmm. With 0 + 1, boinc will not download any work beyond just enough to keep all the cores and GPUs busy. No additional cache at all. Maybe "0" breaks the new logic somehow. I just changed it to .5 + .5 and it is downloading more work no. Try and think of the two Cache settings as a Minimum and Maximum amount of Cache that you'll have, that's how i think it works from what David has said. Claggy |
750)
Message boards :
Questions and problems :
(Waiting on GPU) Returns!...Repeatable on demand!
(Message 42123)
Posted 17 Jan 2012 by Claggy Post: Charlie, Crash over at Einstein has also reported seeing 'waiting for GPU': I have E@H running on multiple Apple laptops - but on the MBP 1.5GHz OS10.5.8 with Boinc 6.12.35 (PowerPC), E@H loads tasks that take 52 hours (they take considerably longer to complete than that) and it currently has a task that has been at "running, high priority" for over 10 days at 100.000% complete. Claggy |
751)
Message boards :
Projects :
List of project for Mac with AMD GPU
(Message 42070)
Posted 14 Jan 2012 by Claggy Post: Proth Prime Search (Sieve) The APP and ATI Steam SDK are only to enable ATI OpenCL support on Windows and Linux, Apple has already enabled OpenCL support on your GPU, PrimeGrid's Server can't tell if hosts running Boinc 6.12.x and earlier have the APP drivers or SDK installed as they don't have code to look for OpenCL support, it should issue work anyway wether or not they are installed, Look my i7-2600K/GTX460/HD5770 gets ATI OpenCL tasks with only Boinc 6.10.58, If after you're edited you're preferences you still don't get work, then ask at PrimeGrid for a suitable app_info, that should bypass any server requirements, or get the project to tweak their server so it does issue work. Claggy |
752)
Message boards :
Questions and problems :
running 2 BOINCs ?
(Message 42067)
Posted 14 Jan 2012 by Claggy Post: I think I've followed the example as far as I can BUT I don't seem to be able to connect to the 2nd BOINC client using the BOINCMgr. I have attempted to connect to the 2nd client using the advanced/select computer/host name/password mechanism using computer name "localhost:9999" and the password created vis notepad in gui_rpc_auth.cfg but keep getting attached back to the orig BOINC client. This is true even if I put the " <allow_multiple_clients>1</allow_multiple_clients>" line in cc_config.xml ... any ideas on how to do the connect?? Since i've still got my 2nd Boinc Installation backed up on a USB Stick (The Hardrive failed a bit later taking out that host's Win 7 installation), i've been looking through it, The one thing i haven't seen mentioned is the setting up of remote_hosts.cfg with the host details, the host i was using the 2nd Boinc Installation was known as P5N-E-SLI, so that was what went in there. I'm thinking of fitting a third GPU (only a PCI GT430) in my i7-2600K/GTX460/HD5770 host this weekend, and this time just attach it to Seti Beta, since at the moment i have no Seti Beta tasks, so i can't loose any. Claggy |
753)
Message boards :
Projects :
List of project for Mac with AMD GPU
(Message 42061)
Posted 13 Jan 2012 by Claggy Post: PrimeGrid also has a Mac OS 10.5+ ATI app: First try setting your PrimeGrid Preferences to only ask for ATI GPU work, and make sure that Proth Prime Search (Sieve) is selected in the AMD (ATI) column. Claggy |
754)
Message boards :
Projects :
List of project for Mac with AMD GPU
(Message 42058)
Posted 13 Jan 2012 by Claggy Post: PrimeGrid also has a Mac OS 10.5+ ATI app: PrimeGrid Applications Claggy |
755)
Message boards :
Questions and problems :
Boinc 7.0.7 for Mac - download link
(Message 42040)
Posted 12 Jan 2012 by Claggy Post:
You can also follow the trac timeline Claggy |
756)
Message boards :
Questions and problems :
Boinc 7.0.7 for Mac - download link
(Message 42038)
Posted 12 Jan 2012 by Claggy Post: Thanks for this information. Yes, this site, just follow the version changelogs posted in the BOINC core client sub-forum, Claggy |
757)
Message boards :
Questions and problems :
Nvidia driver crash when display wakes up
(Message 42036)
Posted 12 Jan 2012 by Claggy Post: Latest Boinc version (6.12.33) So which GPU projects are you running? 270.xx and later drivers introduced 'asynchronous execution', unfortuently the drivers freakout when they are terminated abruptly, eithier causing the GPU to downclock, or the driver to restart, The Solution is to use 267.xx or ealier drivers, or only run GPU projects that have introduced threadsafe Cuda apps, the third option is to not interupt the GPU by using the 'Suspend GPU work while computer is in use?' option, For more information on this problem have a read of this thread: Recent Driver Cuda-safe Project List Claggy |
758)
Message boards :
Projects :
List of project for Mac with AMD GPU
(Message 42001)
Posted 10 Jan 2012 by Claggy Post: Collatz has added a MAC OS X OpenCL Application in the last few days: MAC OS X OpenCL Application Added Claggy |
759)
Message boards :
Questions and problems :
Nvidia driver crash when display wakes up
(Message 41967)
Posted 8 Jan 2012 by Claggy Post: What Boinc version? Which Cuda Projects? Which Nvidia drivers? Best to ask at the Project concerned, it's likely that it's their Cuda app or screensaver that will have caused the driver to restart. Claggy |
760)
Message boards :
Questions and problems :
running 2 BOINCs ?
(Message 41907)
Posted 3 Jan 2012 by Claggy Post: I have it working with BOINC 7.0.2 and I am pretty sure I did it with 6.12.x a few months ago. I think it might not work on Windows, just Linux. I had it working under Boinc 6.10.58 (under windows 7 x64) a few months ago, the problem i had with it was both installations had the same CPID, attaching to a project would generate a new Host ID, but other installation then had all it's Wu's marked as abandoned, and had to get fresh Wu's, attaching to a 2nd project gave me same Host ID as first installation, it then resent the 1st installations Wu's to the 2nd Installation, so i stopped trying to run two projects on the 2nd installation, Claggy |
761)
Message boards :
Questions and problems :
Scheduler Wait
(Message 41838)
Posted 28 Dec 2011 by Claggy Post: (BTW, I didn't know SETI@home had GPU support for Mac, BOINC wiki says it doesn't: http://boinc.berkeley.edu/wiki/GPU_computing Maybe they should update that wiki). Seti doesn't have a Stock Cuda app for OSX, and Lunatics hasn't even done a Cuda port for OSX, so the question is why would Boinc Suspend Seti CPU tasks because there wasn't enough GPU memory? Claggy |
762)
Message boards :
Questions and problems :
OSX 10.3.9 on PPC G4 (an eMac): client ver 6.6.36 fails...
(Message 41771)
Posted 24 Dec 2011 by Claggy Post: Here: http://boinc.berkeley.edu/dl/?C=M;O=A Claggy |
763)
Message boards :
Questions and problems :
Hard drive -> SSD change.
(Message 41726)
Posted 20 Dec 2011 by Claggy Post: The only reason I see to not use an SSD for BOINC is that they have slow write times (or so I've heard) but would that really increase a BOINC task's run time? Having a lot of tasks on hand makes Boinc Manager sluggish, getting the client_state.xml updated a lot faster will help useability, Claggy |
764)
Message boards :
Questions and problems :
Hard drive -> SSD change.
(Message 41716)
Posted 20 Dec 2011 by Claggy Post: What is the path of the data directory, roughly. The location is in your Boinc startup messages, it'll be a hidden folder too, so you'll need to unhide it, I'm tempted to move my Boinc Data Directory to my unused SSD too, (i had got it use the Z68 chipset's Intel Smart Response Technology, but i installed the OS with the HD type set to the wrong type, only a OS reinstall will fix that) Claggy |
765)
Message boards :
Questions and problems :
Impractical settings
(Message 41699)
Posted 18 Dec 2011 by Claggy Post: Just a few beefs I have with an otherwise awesome piece of software: In Boinc 6.10.x go Advanced>Options, and untick 'Run Manager at Login' In Boinc 6.12.x go Tools>Display & Network Options, and untick 'Run Manager at Login' Claggy |
766)
Message boards :
BOINC Manager :
problems with ASUS NVidia 3D
(Message 41696)
Posted 18 Dec 2011 by Claggy Post: anytime your screen saver kicks in my video gets messed up and need to be reinstalled ... please help with this problem ... I'd like to keep running your programs, but it need fixing If you don't supply any useful information, then you can't be helped, See Ageless's 'When requesting help...' post in the Questions and problems Sub-Forum for what info you should be supplying, Claggy |
767)
Message boards :
Questions and problems :
Lost Project and cannot attach
(Message 41557)
Posted 10 Dec 2011 by Claggy Post: Just on this one xp machine the tray icon says "Not connected to a client" and if I try to attach it does not prompt for a password just says "The password you entered is incorrect, please try agian". If Boinc Manager (the GUI) isn't connected to the Boinc client, then there's no way you can attach to any projects, All you need to do is go 'Advanced>select computer>O.K' (you con't need to put any details in if it's the localhost that you're connecting to) This should reconnect Boinc Manager to the client, and your projects and tasks should be visable again, Claggy |
768)
Message boards :
Projects :
I wish to prioritize my Favorite Project!
(Message 41547)
Posted 9 Dec 2011 by Claggy Post: So HOW do you "...Set the resource share of your favorite project to some high value..."? You go to your favourite project, and change the resource share in the project preferences, where else? Claggy |
769)
Message boards :
BOINC Manager :
Video driver crashes when Boinc Mgr placed in snooze
(Message 41467)
Posted 3 Dec 2011 by Claggy Post: I think there is something going on related to the 590. Something used up all your GPU memory: Task 2186748115 Restarted at 68.72 percent, with Lunatics x38g Cuda 3.20 Claggy |
770)
Message boards :
BOINC Manager :
Video driver crashes when Boinc Mgr placed in snooze
(Message 41462)
Posted 3 Dec 2011 by Claggy Post: Ah OK I understand thanks. I don't want to downgrade my drivers just for crunching, my primary system I built for gaming. Crunching is for downtime between gaming sessions. Which GPU projects/apps are you running? If it's Seti, and you're running the Stock Cuda apps, just moving over to the Optimised apps will help, (the latest Cuda apps are thread-safe applications.) (Edit: the reason Fred's hosts don't suffer is because he's running the thread-safe x38g and x41g Cuda apps on his hosts) Claggy |
771)
Message boards :
Projects :
News on Project Outages
(Message 41411)
Posted 30 Nov 2011 by Claggy Post:
I wouldn't say they are totally in a MW condition, Seti Main uploads, Scheduler Contact and Validation still work, it's just the website and downloads that don't work, Claggy |
772)
Message boards :
Questions and problems :
Boinc 6.13.12 client stops working and disappears.
(Message 41332)
Posted 27 Nov 2011 by Claggy Post: powerpc G4 What has that got to do with this thread? you're not running Boinc 6.12.13 or even 6.13.12. Milkyway@home is down, have read of the News on Project Outages thread for further info, when it becomes available. Claggy |
773)
Message boards :
BOINC client :
BOINC versions 6.12.4x tested?
(Message 41250)
Posted 21 Nov 2011 by Claggy Post: Rom Walton wrote:We don't have any test statistics for anything higher than 6.12.34. I was hoping to get test feedback from those helping test T4T as those builds were built for them. If Boinc 6.12.43 isn't listed on the Download page, very few will use it, The only mention of Boinc clients in the Upgrade BOINC client to version >= 6.12.34 thread is for Boinc 6.12.34. Claggy |
774)
Message boards :
BOINC client :
BOINC versions 6.12.4x tested?
(Message 41244)
Posted 21 Nov 2011 by Claggy Post: Also the Download page lists the latest 6.13.12 development Boinc, but doesn't show the lastest 6.12.43 development Boinc, Claggy |
775)
Message boards :
Questions and problems :
GPU CUDA work doesn't auto suspend when computer is in use
(Message 41234)
Posted 19 Nov 2011 by Claggy Post: Which Cuda Project? Which Cuda app? Claggy |
776)
Message boards :
Questions and problems :
No fun graphics!
(Message 41199)
Posted 17 Nov 2011 by Claggy Post: Make sure computation is allowed when the computer is in use, eithier by setting in your computing preferences the following to no: Suspend work while computer is in use? no or by setting in Boinc Manager's Activity Menu 'Run always' Claggy |
777)
Message boards :
Questions and problems :
No fun graphics!
(Message 41196)
Posted 17 Nov 2011 by Claggy Post: Which projects have you attached to? Not all projects have screensavers. Claggy |
778)
Message boards :
Questions and problems :
BOINC on AMD GPU - Computation Error after update to Catalyst 11.11
(Message 41189)
Posted 17 Nov 2011 by Claggy Post: Hi, Note this is the Boinc Forum, not MilkyWay@Home, best to ask there about problems with their app, anyway if Cat 11.11 doesn't work, change your drivers to one that does, Claggy |
779)
Message boards :
Questions and problems :
is BOINC damaging my PC?
(Message 41124)
Posted 12 Nov 2011 by Claggy Post: Still sounds a bit hot to me, if you can get it down another 20 to 30°C it would be better, (to around 70°C) Claggy |
780)
Message boards :
BOINC Manager :
Feature request - task control
(Message 41043)
Posted 7 Nov 2011 by Claggy Post: Hard to believe, but maybe we're talking different things. There was a time that suspending tasks were not counted for the cache and that's been gone a very long time. If suspending tasks, when technically the cache is full, then fetching work from other projects to exceed the total value of cache, I'd be surprised. I've had a task for longer in suspend [the last task], not the project, and BT tells me the sum of all work is still what I've got set, and never requesting more unless that projected total [of all projects] drops below the set value. Same observation for 6.10 and 6.12. I'm sure that suspended projects/tasks aren't counted towards the cache (in Boinc 6.10.58 and 6.12.41), i tend to get a small stash of CPDN tasks for a rainy day, then suspend them all but one, and fill up with tasks from Seti and Seti Beta, i've been caught out a few times when i've not had NNT set at a project, and i've suspended another project, and suddenly had extra work that i hadn't intended to get. Claggy |
781)
Message boards :
Questions and problems :
is BOINC damaging my PC?
(Message 40957)
Posted 4 Nov 2011 by Claggy Post: You might want to clean the dust bunnies out of your computer, i clean mine every month or so, and disassemble the heatsink on the GPU every 6 months, Claggy |
782)
Message boards :
Questions and problems :
BOINIC crashing my system?
(Message 40890)
Posted 29 Oct 2011 by Claggy Post: BOINC is a piece of **** software Then tell us what your problem is, then we can get it fixed, first of all which version? Claggy |
783)
Message boards :
Questions and problems :
Boinc Crashed nvidia kernel
(Message 40621)
Posted 10 Oct 2011 by Claggy Post: Which project is this on? and with which application? what driver version? Claggy |
784)
Message boards :
Questions and problems :
The work packets (whatever they're called) stop at 100%
(Message 40553)
Posted 6 Oct 2011 by Claggy Post: Read the Forums over at Setiathome, this is the Boinc Message Boards and has nothing to do with Individual Projects. Basically there were scheduler changes that mucked up the DCF all hosts Wu's would achieve, (and prodicted runtimes) and when the fix was applied all hosts would overfetch work, so they applied a limit of 50 tasks for CPU's and 400 tasks for GPU's for now. Claggy |
785)
Message boards :
Questions and problems :
The work packets (whatever they're called) stop at 100%
(Message 40521)
Posted 2 Oct 2011 by Claggy Post: Thanks for your help, although I can't find completed projects on the list even when I tell it to view all projects. That's completed tasks, not projects, If your completed tasks have already been reported, you then can't view them in Boinc Manager, you'll just have to go the project website to view them there instead, Claggy |
786)
Message boards :
BOINC client :
Client task scheduling
(Message 40504)
Posted 1 Oct 2011 by Claggy Post:
The interesting order depends on work availability at the attached projects, Claggy |
787)
Message boards :
Projects :
News on Project Outages
(Message 40402)
Posted 27 Sep 2011 by Claggy Post: Collatz went 'vapor' about 8AM PDT this morning. Possibly local power outage or ISP problem. At a guess, he'll not be able to resolve matters until this afternoon when he gets back on site. Seems Collatz had a planned outage: The project will be down this morning starting around 9 or 9:30am while a new electrical circuit is added but should be back up within a few hours. and it took longer than expected: Sorry it took longer than expected. Everything should be back up and running now. Claggy |
788)
Message boards :
Questions and problems :
BOINIC crashing my system?
(Message 40392)
Posted 27 Sep 2011 by Claggy Post: Just downloaded BOINIC software. My system has the following attributes: What Power Suppy do you have? If it isn't man enough reboots will happen. Claggy |
789)
Message boards :
Questions and problems :
Change required in how boinc works?
(Message 40343)
Posted 24 Sep 2011 by Claggy Post: Rather than limiting the CPU usage to limit the Temperature, how about fix the cooling instead? Claggy |
790)
Message boards :
Questions and problems :
OS X Lion: finding a boinc_manager group
(Message 40333)
Posted 23 Sep 2011 by Claggy Post: I downloaded the latest version of BOINC Numbers please, you could be running one of three or four latest versions, Claggy |
791)
Message boards :
Questions and problems :
GPU nicht gefunden..?
(Message 40232)
Posted 18 Sep 2011 by Claggy Post: If I uninstall Boinc, all my running but not finished tasks will be lost? Nothing should be lost as Boinc installs all it's program files in one location, and all it's Data files in a totally different location that isn't touched when uninstalling: 18.09.2011 06:27:59 | | Data directory: C:\ProgramData\BOINC Claggy |
792)
Message boards :
Questions and problems :
GPU nicht gefunden..?
(Message 40230)
Posted 18 Sep 2011 by Claggy Post: 18.09.2011 06:27:59 | | Starting BOINC client version 6.12.34 for windows_x86_64 That's your problem, you can't install Boinc as a Service and use GPU's with Windows Vista and Windows 7 (you can with XP) So uninstall Boinc, and then reinstall, and don't tick the 'Protected Application Execution' box, There's an explaination here as to why. Claggy |
793)
Message boards :
Questions and problems :
GPU nicht gefunden..?
(Message 40227)
Posted 18 Sep 2011 by Claggy Post: Can you post your Boinc startup messages please. O.K, what version of Boinc are you running? In Boinc 6.10.x and earlier (as long as you're in the Advanced view) it is in the messages tab, (Ctrl+Shift+M) In Boinc 6.12.x and later the messages tab is now called the Event Log and is hidden away in the Advance Menu, (Ctrl+Shift+E) and opens in a separate window. Claggy |
794)
Message boards :
Questions and problems :
GPU nicht gefunden..?
(Message 40225)
Posted 18 Sep 2011 by Claggy Post: Can you post your Boinc startup messages please. Claggy |
795)
Message boards :
Questions and problems :
Screensaver issues in client versions 6.12.33 & 6.12.34.
(Message 40021)
Posted 5 Sep 2011 by Claggy Post: Did you restart Windows? Claggy |
796)
Message boards :
Questions and problems :
GPU Stopped Being Detected After Installing In Service Mode
(Message 39944)
Posted 29 Aug 2011 by Claggy Post: You probably did a 'protected application execution' install, uninstall Boinc, and reinstall without that option ticked, Claggy |
797)
Message boards :
Questions and problems :
New boinc slows computer unless less cores are used
(Message 39892)
Posted 27 Aug 2011 by Claggy Post: Is the Desktop laggy?, what's it like if you suspend GPU usage via the activity menu? Claggy |
798)
Message boards :
Questions and problems :
New boinc slows computer unless less cores are used
(Message 39882)
Posted 26 Aug 2011 by Claggy Post: Have a read of this thread over at Einstein, same advice applies, try 266.58 drivers: Strange Behaviour with GT240 Claggy |
799)
Message boards :
Questions and problems :
New boinc slows computer unless less cores are used
(Message 39864)
Posted 25 Aug 2011 by Claggy Post: What Boinc version?, what GPU? what GPU drivers?, what projects & apps are the CPU's running?, what projects & apps are the GPU's running? Claggy |
800)
Message boards :
Questions and problems :
BONIC Runtime Error Message keep being received
(Message 39862)
Posted 25 Aug 2011 by Claggy Post: Ok, try this link - Make sure you're in the right tab, you can suspend individual tasks in the tasks tab, the whole project can also be suspended in the project tab, (Your picture shows you're selected multiple tasks in the task tab, some of those tasks are suspended individually, while some of the tasks are suspended because the project is suspended) Claggy |
801)
Message boards :
Questions and problems :
BOINC reset my jobs when WIN starts
(Message 39857)
Posted 25 Aug 2011 by Claggy Post: Well, before we blame BOINC, how about you attach to another project? There are plenty to choose from. I found this thread about checkpointing on the Spinhenge's forum: core_shell_nanoparticle - no checkpoints there's another recent one, but it's in german: Checkpointing Windows and going back to an earlier app: Does Metropolis 2.42 checkpoint? Claggy |
802)
Message boards :
Questions and problems :
multiprojects : 1 running task instead of 4
(Message 39855)
Posted 25 Aug 2011 by Claggy Post: Einstein@home is only in high priority because Boinc thinks it won't complete in time, once the CPU task goes out of high priority, Boinc will ask for work from Einstein again, You could try suspending Milkyway and see if Boinc asks for work, then unsuspend Milkyway again, Claggy |
803)
Message boards :
Questions and problems :
BOINC reset my jobs when WIN starts
(Message 39847)
Posted 25 Aug 2011 by Claggy Post: According to your tasks list, something or someone is aborting all your work. According to those Aborted tasks, they were two weeks past their deadline, So Boinc 6.12.33 would have aborted them: Report deadline 9 Aug 2011 12:20:22 UTC Claggy |
804)
Message boards :
Questions and problems :
can't upload when using dsl 512/64
(Message 39764)
Posted 21 Aug 2011 by Claggy Post: oh indeed , in properties my cc_config has .text ... You should be able to right click on the file, and choose Rename, then remove the .txt, click enter, then Yes, If you want to see what extensions files have, go to Control Panel>Folder Options, in the view tab untick 'Hide extensions of known file types', then O.K Claggy |
805)
Message boards :
Questions and problems :
can't upload when using dsl 512/64
(Message 39762)
Posted 21 Aug 2011 by Claggy Post: 21/08/2011 06:56 130 cc_config.xml.txt Your cc_config.xml has a .txt extension which it shouldn't have. Claggy |
806)
Message boards :
Questions and problems :
can't upload when using dsl 512/64
(Message 39760)
Posted 21 Aug 2011 by Claggy Post: You missed the dir out, This is what i get when i run dir C:\ProgramData\BOINC\cc* Microsoft Windows [Version 6.1.7601] Claggy |
807)
Message boards :
Questions and problems :
Using new drive and OS
(Message 39727)
Posted 20 Aug 2011 by Claggy Post: ...pasted my "account_xml" files (which I had copied earlier) into the BOINC folder... All the project related files go in the Boinc Data directory, the location of which is posted in your Boinc startup messages, it'll be a hidden folder too, Claggy |
808)
Message boards :
Questions and problems :
BOINC MANAGER
(Message 39583)
Posted 11 Aug 2011 by Claggy Post: Add a day or two onto 'Computer is connected to the Internet about every' setting and take a day or two off the 'additional work buffer', Boinc will then try and do that a day or two earlier, and less close to deadline, Claggy |
809)
Message boards :
GPUs :
Caught SIGSEGV in ATI GPU detection
(Message 39488)
Posted 6 Aug 2011 by Claggy Post: Raistmer tried installing a HD4870 in Win 2003 host last year, Cat 10.4/10.5 couldn't see the GPU so no drivers would install. I had a look round AMD's driver search tool, couldn't find any Win 2003 drivers. (I got Cat 11.7 and 280.19 installed on my Win 7 host O.K) Claggy |
810)
Message boards :
GPUs :
Caught SIGSEGV in ATI GPU detection
(Message 39483)
Posted 6 Aug 2011 by Claggy Post: Catalyst drivers from Cat 10.3 to 10.12 wouldn't co-exist when Nvidia drivers/GPU were installed/fitted, (without a workaround) the first recent driver that allowed Nvidia & ATI GPU's/drivers to co-exist is Cat 11.2, will be trying Cat 11.7 and Cat 11.8 preview along with 280.xx shortly and will report back if i have any trouble, Claggy |
811)
Message boards :
GPUs :
Problem with GPU, Computer crushes
(Message 39464)
Posted 5 Aug 2011 by Claggy Post: Sorry im too stupid, why i didn't have an app_info.xml file? You won't have one, you have to make it yourself, see Anonymous_platform Best ask at Milkyway for help constructing an app_info.xml suitable for your host. Claggy |
812)
Message boards :
Questions and problems :
Scheduler request failed: Error 417 . HELP PLZ!!
(Message 39455)
Posted 5 Aug 2011 by Claggy Post: THAT IS CC_CONFIG.XML If you spell it WRONG it won't work. Claggy |
813)
Message boards :
Questions and problems :
can't upload when using dsl 512/64
(Message 39447)
Posted 4 Aug 2011 by Claggy Post: Which Project is this at, have you check to see if their servers are up? Claggy |
814)
Message boards :
Questions and problems :
Unintentional "Return Results Immediately"
(Message 39431)
Posted 3 Aug 2011 by Claggy Post: I'm seeing Boinc 6.12.34 start reporting before the last upload is complete (with NNT set), i'm sure 6.12.x is supposed to package them up into one report: 03/08/2011 12:12:45 Einstein@Home Started upload of h1_0310.55_S6GC1__1203_S6BucketA_0_0 03/08/2011 12:12:45 Einstein@Home Started upload of h1_0310.60_S6GC1__1252_S6BucketA_1_0 03/08/2011 12:12:57 Einstein@Home Finished upload of h1_0310.55_S6GC1__1203_S6BucketA_0_0 03/08/2011 12:12:57 Einstein@Home Finished upload of h1_0310.60_S6GC1__1252_S6BucketA_1_0 03/08/2011 12:12:57 Einstein@Home Started upload of h1_0310.70_S6GC1__1084_S6BucketA_1_0 03/08/2011 12:12:59 Einstein@Home [sched_op] Starting scheduler request 03/08/2011 12:12:59 Einstein@Home Sending scheduler request: To report completed tasks. 03/08/2011 12:12:59 Einstein@Home Reporting 2 completed tasks, not requesting new tasks 03/08/2011 12:12:59 Einstein@Home [sched_op] CPU work request: 0.00 seconds; 0.00 CPUs 03/08/2011 12:12:59 Einstein@Home [sched_op] NVIDIA GPU work request: 0.00 seconds; 0.00 GPUs 03/08/2011 12:13:09 Einstein@Home Finished upload of h1_0310.70_S6GC1__1084_S6BucketA_1_0 03/08/2011 12:13:09 Einstein@Home Scheduler request completed 03/08/2011 12:13:09 Einstein@Home [sched_op] Server version 611 03/08/2011 12:13:09 Einstein@Home Project requested delay of 60 seconds 03/08/2011 12:13:09 Einstein@Home [sched_op] handle_scheduler_reply(): got ack for task h1_0310.60_S6GC1__1252_S6BucketA_1 03/08/2011 12:13:09 Einstein@Home [sched_op] handle_scheduler_reply(): got ack for task h1_0310.55_S6GC1__1203_S6BucketA_0 03/08/2011 12:13:09 Einstein@Home [sched_op] Deferring communication for 1 min 0 sec 03/08/2011 12:13:09 Einstein@Home [sched_op] Reason: requested by project 03/08/2011 12:14:14 Einstein@Home [sched_op] Starting scheduler request 03/08/2011 12:14:14 Einstein@Home Sending scheduler request: To report completed tasks. 03/08/2011 12:14:14 Einstein@Home Reporting 1 completed tasks, not requesting new tasks 03/08/2011 12:14:14 Einstein@Home [sched_op] CPU work request: 0.00 seconds; 0.00 CPUs 03/08/2011 12:14:14 Einstein@Home [sched_op] NVIDIA GPU work request: 0.00 seconds; 0.00 GPUs 03/08/2011 12:14:27 Einstein@Home Scheduler request completed 03/08/2011 12:14:27 Einstein@Home [sched_op] Server version 611 03/08/2011 12:14:27 Einstein@Home Project requested delay of 60 seconds 03/08/2011 12:14:27 Einstein@Home [sched_op] handle_scheduler_reply(): got ack for task h1_0310.70_S6GC1__1084_S6BucketA_1 03/08/2011 12:14:27 Einstein@Home [sched_op] Deferring communication for 1 min 0 sec 03/08/2011 12:14:27 Einstein@Home [sched_op] Reason: requested by project Claggy |
815)
Message boards :
Questions and problems :
Boinc 6.12.33 screen saver says boinc not working, but is
(Message 39430)
Posted 3 Aug 2011 by Claggy Post: You could try Boinc 6.12.34, It has screensaver fixes in it Change Log: • WINSCR: Remove diagnostics screensaver dialog when the screensaver fails to be able open up the log files. • Mac: Fix bug where menubar icon menu did not work after changing skin. • Mac: Refine bug fix for menubar icon menu not working after changing skin. • lib: Fix the various '????' fields in the diagnostics framework during a crash on Windows. Somewhere along the lines I messed up with the conversions of single-byte characters vs. double-byte characters. • MGR: Fix "Can't load Image" messages in Simple View. • SCR: Fix delay dismissing screensaver under Mac OS10.7. BOINC 6.12.34 released for testing for Windows and Linux Claggy |
816)
Message boards :
GPUs :
Problem with GPU, Computer crushes
(Message 39372)
Posted 30 Jul 2011 by Claggy Post: According to this post on the milkyway forums the command parameter to reduce the display lag on the milkyway GPU apps is: Try this command in your app_info.xml: Claggy |
817)
Message boards :
GPUs :
Problem with GPU, Computer crushes
(Message 39356)
Posted 29 Jul 2011 by Claggy Post: You don't say what GPU projects you're running, some GPU apps can be configured by using command parameter's in an app_info to make the app less laggy, ask at your GPU projects for info, Claggy |
818)
Message boards :
Questions and problems :
zero disk space after upgrade of BOINC
(Message 39344)
Posted 28 Jul 2011 by Claggy Post: Oh Yea, Boinc 6.12.x has Event Log, Doh, Claggy |
819)
Message boards :
Questions and problems :
zero disk space after upgrade of BOINC
(Message 39340)
Posted 28 Jul 2011 by Claggy Post: What do your BOINC startup messages say about "Preferences limit disk usage to ____GB"? Post your Boinc startup messages please, Claggy |
820)
Message boards :
GPUs :
Zotac ION-GPU-A-E ION Upgrade Kit
(Message 39328)
Posted 27 Jul 2011 by Claggy Post: I got myself a PCI 512Mb 8400 GS two months ago, i've managed to run it at Seti, Collatz and Einstein too, it wouldn't run the earlier Lunatics Cuda app, so Jason fixed the app so it would work with SSE only CPU's, :-) it cost me £39.93, i managed to get it just before PCI Cuda cards went out of Stock here, Claggy |
821)
Message boards :
Questions and problems :
Excessive IPv4 loopback
(Message 39294)
Posted 26 Jul 2011 by Claggy Post: Eithier click 'Show active tasks' only, or Shut Boinc Manager down while still leaving the client running, Claggy |
822)
Message boards :
Questions and problems :
Windows 7 lockup during screensaver
(Message 39288)
Posted 26 Jul 2011 by Claggy Post: No, if the screensaver is set to none, then there is no screensaver set, setting it to Boinc will activate the Boinc/Project screensavers, Claggy |
823)
Message boards :
Questions and problems :
Windows 7 lockup during screensaver
(Message 39274)
Posted 25 Jul 2011 by Claggy Post: So does that mean you're NOT running any ATI GPU science apps? I suspect you're probably running the Milkyway ATI 0.82 (ati14) science app, i'd recommend not running screensavers at the same time as running GPU science apps, they compete for resources, The drivers for the HD6970 aren't quite right yet, Other HD6970 users report problems with drivers after Cat 11.2, the problems will supposeably be fixed in Cat 11.8, If your GPU temps are too high, you can switch to Manual Fan Control in CCC, on the Performance page, enable AMD Overdrive (leave the clocks as they are), then enable Manual Fan Control, then Bump the Speed up higher, my HD5770 is set at 70%, this gives temps of ~60°C (Your mileage may vary) Claggy |
824)
Message boards :
Questions and problems :
Windows 7 lockup during screensaver
(Message 39260)
Posted 25 Jul 2011 by Claggy Post: What Catalyst drivers are you running? What ATI GPU apps are you running? Claggy |
825)
Message boards :
Questions and problems :
BOINC Manager 6.10.58 Startup
(Message 39180)
Posted 22 Jul 2011 by Claggy Post: It should be "Start Manager at login?" in your Options Did you then eithier shut Boinc fully down or exit the Manager? or did you go straight for a Reboot?, I'm sure Boinc Manager saves that registry value on exit. Claggy |
826)
Message boards :
Questions and problems :
Visual C++ Runtime
(Message 39145)
Posted 20 Jul 2011 by Claggy Post: I had a New CPDN model fail with that error the other day, Best to enquire on their Forum when it is up, Claggy |
827)
Message boards :
GPUs :
Yet another No usable GPUs found
(Message 39090)
Posted 18 Jul 2011 by Claggy Post: The Problem i reported was a Windows only problem, with downclocking of GPU's with non thread safe Cuda apps and Cuda 4 drivers, FYI to all Nvidia Crunches out there... Clock speed Problems Claggy |
828)
Message boards :
GPUs :
Can I run BOINC programs on PCI (Not PCI-E) GPUs?
(Message 39088)
Posted 18 Jul 2011 by Claggy Post: Both Seti and Collatz work on my PCI 512Mb 8400 GS no problem (on 266.58 drivers, there are problems with 27x.xx and later drivers) That was under Windows, with 27x.xx (Cuda 4) drivers there are downclocking problems because the existing Windows Cuda apps aren't thread safe, Read Jason's post for the full low down, i don't think it applies to Linux, and i didn't even try 27x.xx drivers because of those problems: OK I will. It's quite involved, but I'll try detail first then explain further if needed. Claggy |
829)
Message boards :
BOINC Manager :
50 projects under Boinc.
(Message 38999)
Posted 16 Jul 2011 by Claggy Post: I have make what is asked, and there is the list of the errors higher in this comment. No, you haven't, Ageless posted a modified Boinc Manager for you to run, that will output useful debug info, and you haven't posted the output from that Boinc Manager, Claggy |
830)
Message boards :
BOINC Manager :
50 projects under Boinc.
(Message 38985)
Posted 16 Jul 2011 by Claggy Post: Did you do as Ageless requested in his last post? You haven't posted the debug info he asked for yet, Claggy |
831)
Message boards :
Projects :
New Project - Radioactive@Home
(Message 38982)
Posted 16 Jul 2011 by Claggy Post: It is a solution of low price to create a detector of radioactive, why no solution for Boinc? Because it's not a HID class device, it doesn't use this circuit diagram, and if it has a Attiny4313 / Attiny2313 chip, it won't have been flashed with the program required, Claggy |
832)
Message boards :
Questions and problems :
Problem with remote control
(Message 38963)
Posted 15 Jul 2011 by Claggy Post: Have you put in the GUI RPC password for the other host? Controlling BOINC remotely Claggy |
833)
Message boards :
Projects :
News on Project Outages
(Message 38911)
Posted 12 Jul 2011 by Claggy Post: It looks like Aqua may end up in permanent stasis -- they feel they must rely on BOINC central for credit schemes and until (or if) those schemes are reasonable, the project won't proceed. Slicker at Collatz has managed to bypass NewCredit, and still runs his Credit system with recent Boinc server software, Claggy |
834)
Message boards :
Questions and problems :
6.12.33 fails to install normally in Vista.
(Message 38839)
Posted 8 Jul 2011 by Claggy Post: Trying to install 6.12.33 on my 64bit i7 Windows 7 system results in an unexpected shutdown. Very nice. Unexpected shutdown of what? the Boinc Install Program? Boinc Manager? the Boinc Client? Or Windows? If no one else has reported this problem, then you're the first, It's only a Poor Show that you haven't followed Ageless's 'when requesting help' post: When you're requesting help on these forums, please be so kind as to give information about which BOINC version you run (See Help->About BOINC in BOINC Manager), about your system, the projects you are attached to and what you have done so far to try to remedy the problem. Claggy |
835)
Message boards :
GPUs :
System hanging following ~2 min after win boot, following new GPU install
(Message 38835)
Posted 8 Jul 2011 by Claggy Post: So you're put 3 One Gig GPU's in a system that runs 32bit Windows, and you you expect the System RAM to be accessable too? Memory Limits for Windows Releases You can try enabling the PAE switch, and see if that improves matters: Physical Address Extension - PAE Memory and Windows Or try a 64bit OS (If possible), then it will be able to address more than 3 Gig, Claggy |
836)
Message boards :
GPUs :
2nd GPU of 4870x2 stays in 2d clocks
(Message 38834)
Posted 8 Jul 2011 by Claggy Post: AMD's OpenCL system requirements lists the supported devices: 5900 Series (5970) and 4870 X2 are supported, but Supported in single-GPU mode only. System Requirements & Driver Compatibility Claggy |
837)
Message boards :
Projects :
New Project - Radioactive@Home
(Message 38778)
Posted 4 Jul 2011 by Claggy Post: But since it's only got Linux apps so far and then only to test with as everyone is waiting for the necessary hardware to be available (which has to be bought by the user!), there's no hurry to attach here. Technically you were wrong about that, a windows app was released at 4 Jul 2011 | 5:31:44 UTC ;-) Claggy |
838)
Message boards :
GPUs :
Can I run BOINC programs on PCI (Not PCI-E) GPUs?
(Message 38428)
Posted 14 Jun 2011 by Claggy Post: Both Seti and Collatz work on my PCI 512Mb 8400 GS no problem (on 266.58 drivers, there are problems with 27x.xx and later drivers) And Collatz works no problem on my Asus AGP HD4650 too, and is vastly faster than the 8400 GS. Claggy |
839)
Message boards :
BOINC client :
Computer hang
(Message 38348)
Posted 11 Jun 2011 by Claggy Post: The only txt file present in my BOINC directory is stderrgfx.txt. Boinc Data directory, not Boinc Program directory, the location of which should be C:\ProgramData\BOINC\ Claggy |
840)
Message boards :
Projects :
News on Project Outages
(Message 38296)
Posted 9 Jun 2011 by Claggy Post: Collatz is up again, Claggy |
841)
Message boards :
Projects :
News on Project Outages
(Message 38293)
Posted 9 Jun 2011 by Claggy Post: Collatz is unreachable, and Seti is having another upload hiccup, Claggy |
842)
Message boards :
BOINC client :
Computer hang
(Message 38157)
Posted 4 Jun 2011 by Claggy Post: Hum, saying you have the latest release of Boinc means different things to different people, what actual number is that? 32bit or 64bit Boinc? Have you got a GPU?, was it involved in crunching on a different project while you were also running a project screensaver on it? Probably better to ask on the CPDN forums about their screensaver first through, Claggy |
843)
Message boards :
Questions and problems :
Apps still running when Boinc is closed
(Message 38120)
Posted 2 Jun 2011 by Claggy Post: David Anderson wrote:The client doesn't exit until the 15 seconds is up. Boinc 6.12.28 takes 10 seconds to shutdown here, Claggy |
844)
Message boards :
BOINC client :
6.12.26: insufficient nVidia tasks
(Message 38114)
Posted 1 Jun 2011 by Claggy Post: When i ran collatz only on my E8500/GTX460/HD5770 machine's GPU's (last year using Boinc 6.10.58), i did tend to find it biased one way or other, then it would meet the Wu limits in place, so no more Wu's until i completed one, when i lowered the cache enough, then it steadied out 50/50 Nvidia/ATI, so it was cache limited instead of limited by total number of Wu's, Claggy |
845)
Message boards :
Questions and problems :
Apps still running when Boinc is closed
(Message 38051)
Posted 29 May 2011 by Claggy Post: I've been suffering this problem since Boinc 6.12.16, in my case it's only the Collatz Cuda app that remains running after Boinc is shut down, I did report it to the Boinc Alpha list on the 7th March, but no one else replicated it at the time, and i did tell the developers 6.12.15 worked properly, it has only been in the last week that anyone else has replicated it, Peter Slacik has reported see it with the Collatz Cuda app (on the Boinc Alpha list), Yesterday Miep and Arkayn reported seeing it with the Collatz Cuda app too (in a Lunatics Development thread) and now Sirus B and Grill have reported here about the same problem, Sirus B also seeing it with CPU Freehal, I suspect it's changeset [trac]changeset:23093[/trac] that has caused it, Boinc used to kill the app after 5 seconds, now it waits 15 seconds, but before that 15 seconds is up, Boinc has already shut down, leaving apps still running. That changeset was in response to another Bug i reported, when Boinc 6.12.x puts Collatz Cuda tasks into High Priority, and a new Collatz Cuda task starts, the freshly started Collatz task errors out with not enough GPU memory available because the last Collatz Cuda task hasn't quite finished yet, and so hasn't freed the GPU memory, Claggy |
846)
Message boards :
GPUs :
Select a different project for each GPU
(Message 38046)
Posted 29 May 2011 by Claggy Post: While you're at it, have a read of the GPUGRID news items: CUDA2.2 application will be deprecated by June 3 - Update Nvidia drivers Claggy |
847)
Message boards :
GPUs :
GPUs not crunching at 100%
(Message 38044)
Posted 29 May 2011 by Claggy Post: Ask on the project of the GPU app, Claggy |
848)
Message boards :
GPUs :
Select a different project for each GPU
(Message 38043)
Posted 29 May 2011 by Claggy Post: The 8800GTX is a Cuda GPU, it just isn't good enough to run GPUGRID's Cuda2.2 app, have you asked about this on GPUGRID's forum? The way round this is to run two clients, and disable a different GPU in each client, then set the 8800GTX to run on a project that it can run, Claggy |
849)
Message boards :
Questions and problems :
Apps still running when Boinc is closed
(Message 38041)
Posted 29 May 2011 by Claggy Post: As i said to Sirus B in the other thread: Which projects? which apps? Claggy |
850)
Message boards :
Questions and problems :
Not running both GPUs
(Message 38037)
Posted 28 May 2011 by Claggy Post: First thing i would try is try the 268.58 drivers, there are downclocking problems with 27x.x Cuda4 drivers in conjunction with legacy Cuda apps, see this post: This problem has recently been drawn to the attention of the SETI CUDA developers, and is in the process of being reported onwards to other CUDA-enabled BOINC projects. It seems to be related specifically to the release of nVidia drivers which will support the forthcoming v4 release of the CUDA run-time support files. The central BOINC library code isn't yet fully compatible with CUDA v4: the problem has been overcome with test programs, and should go away with the next round of application releases. Claggy |
851)
Message boards :
Questions and problems :
Boinc failing to close apps
(Message 38034)
Posted 28 May 2011 by Claggy Post: Which projects? which apps? CPU or GPU, or both? Claggy |
852)
Message boards :
Questions and problems :
Not running both GPUs
(Message 37951)
Posted 23 May 2011 by Claggy Post: Boinc Startup messages would help, as would a link to that host on that project, Claggy |
853)
Message boards :
BOINC client :
How do I stop GPU processing?
(Message 37944)
Posted 23 May 2011 by Claggy Post: Thanks, I thought of that also; but there is no configuration that even asks on their Computing Preferences. Not Computing Preferences which is Global across all Projects, But Project Preferences, which are the Preferences for that project, Claggy |
854)
Message boards :
BOINC client :
How do I stop GPU processing?
(Message 37942)
Posted 23 May 2011 by Claggy Post: Deselect at that project's preferences page, 'Use Nvidia GPU', then you'll no longer get GPU work from that project, Claggy |
855)
Message boards :
BOINC Manager :
set permission for all users after install
(Message 37930)
Posted 22 May 2011 by Claggy Post: Yes, Uninstalling Boinc only removes Boinc from the Program files Directory, all User data is stored separately in the Boinc Data directory, Claggy |
856)
Message boards :
BOINC Manager :
set permission for all users after install
(Message 37928)
Posted 22 May 2011 by Claggy Post: Uninstall, then reinstall selecting options you require, Claggy |
857)
Message boards :
Questions and problems :
What was it I saw while running Einstwin@Home on May 4th between 2:00 PM & 3:30 PM Mountain
(Message 37887)
Posted 19 May 2011 by Claggy Post: Best to ask at the Einstein project forums, this is the Boinc development forum, Claggy |
858)
Message boards :
BOINC Manager :
Boin 6.12.26: Columns not movable
(Message 37879)
Posted 19 May 2011 by Claggy Post: It was requested by a user called Loki Clock: You'll also need to copy boinc.dll to a safe place too, and restore that too, otherwise the Boinc Manager won't start, Claggy |
859)
Message boards :
Questions and problems :
Kidding???
(Message 37819)
Posted 15 May 2011 by Claggy Post: Normal computer operations, Boinc suspened, runs at 45C, on all 4 cores, but with a 4 core task runnning on Seti it goes up to 65 and with Throttle it is set at 60. If you think your core temperatures are going up too high, isn't it a better idea to take the side off you computer and clear out the dust bunnies? if the cores still run too hot when the science apps are running, try an after market cooler, good ones are so much more effiecient than the Stock coolers. Claggy |
860)
Message boards :
BOINC client :
Need help about client_state.xml
(Message 37818)
Posted 15 May 2011 by Claggy Post: I don't want do this because in future I don't plane use other projects except SETI. I think it is not big secret - client_state.xml yes? Please anobody post it to me. Thank you in advance Then use a different email address and attach as a different user then, Claggy |
861)
Message boards :
Questions and problems :
Unable to upgrade
(Message 37767)
Posted 11 May 2011 by Claggy Post: Have a read of this post: Complete uninstall of BOINC You might want to wait for other answers too. Claggy |
862)
Message boards :
GPUs :
2nd GPU of 4870x2 stays in 2d clocks
(Message 37747)
Posted 10 May 2011 by Claggy Post: Is there any place you can provide me, so I can post inform AMD of that, if it is their "bug"? At AMD's Driver download page there is a driver feedback link: AMD Radeon™ Video Card Drivers or at the AMD Developer's OpenCL forum: AMD Developer» Software Development Topics » OpenCL™ Claggy |
863)
Message boards :
GPUs :
2nd GPU of 4870x2 stays in 2d clocks
(Message 37732)
Posted 9 May 2011 by Claggy Post: From the r449/r456 Release Notes: Known issues:: timiman also reported problems on his 4870x2 (in same thread): Good news, managed to download another task for the 2nd GPU. No one has reported on the Seti Forums or at Lunatics whether the r177 MB app or later AP apps work correctly or not on this GPU, Claggy |
864)
Message boards :
GPUs :
2nd GPU of 4870x2 stays in 2d clocks
(Message 37730)
Posted 9 May 2011 by Claggy Post: Better to ask in Number Crunching on the Seti Boards, or at Lunatics if you have an account there. Do know that the r456 AP app isn't the latest ATI AP app, r516 is the latest Released app, and r521 is in Beta testing, (r505 and later is quite a bit quicker) Have you tried other Catalyst drivers yet? is it the same with Catalyst 11.2, 11.3 or 11.5? Claggy |
865)
Message boards :
BOINC Manager :
Windows 7 manager/core startup option?
(Message 37667)
Posted 1 May 2011 by Claggy Post: With Boinc 6.10.x and earlier, it is Advanced>Options, untick 'Run Manager at login?' then O.K, With Boinc 6.12.x, that option is in Tools instead of Advanced. Claggy |
866)
Message boards :
GPUs :
GPU's won't crunch at all
(Message 37652)
Posted 30 Apr 2011 by Claggy Post: I'm glad you got it sorted, Claggy |
867)
Message boards :
GPUs :
GPU's won't crunch at all
(Message 37642)
Posted 29 Apr 2011 by Claggy Post: Please don't shout, if you do another post like that you won't get any more help. In Boinc's activity menu, make sure 'Use GPU' isn't set to never. Claggy |
868)
Message boards :
GPUs :
GPU's won't crunch at all
(Message 37640)
Posted 28 Apr 2011 by Claggy Post: Posting your startup messages once is enough, you do know you can edit your posts for the first hour? I had a look at your host at each of the projects you're attached to, you do have Cuda/OpenCL tasks at Seti, Collatz and MilkyWay, but none completed, i also see you have Multi-Threaded tasks at Aqua, try suspending the Aqua tasks, i suspect that's what's stopping your Cuda computation, Claggy |
869)
Message boards :
Questions and problems :
Classic screensaver : where is it
(Message 37626)
Posted 28 Apr 2011 by Claggy Post: Ageless, Sorry I thought I was using their software. So boinc uses no software screensavers to visually analyze data. Yes, I enjoy the static...:) Boinc is just the managing software, Projects produce their own apps which analyze data and also produce the screensavers which display it, Claggy |
870)
Message boards :
GPUs :
Project GPU requirements
(Message 37605)
Posted 26 Apr 2011 by Claggy Post: Not a problem, thanks for the reply, been trying to remind myself to play games too. :) Claggy |
871)
Message boards :
GPUs :
Project GPU requirements
(Message 37579)
Posted 25 Apr 2011 by Claggy Post: Bump? Claggy |
872)
Message boards :
Questions and problems :
Only using 50% of CPU?
(Message 37576)
Posted 24 Apr 2011 by Claggy Post: Make sure in your computing preferences, If you're using Boinc 6.1.x or later you're got the following set to: On multiprocessors, use at most 100% Enforced by version 6.1+ If you're using a Boinc version earlier than 6.1.x make sure the following is set to the same value of cores (or more) than your CPU has: On multiprocessors, use at most 4 processors If you're using Web Computing Preferences, make sure you haven't over-riden them with local preferences, try Clearing the local preferences, (With Boinc 6.10.x and earlier, that is Advanced>Preferences, then Clear, then Yes.) and last but not least, make sure you have enough tasks to utilise your cores. Claggy |
873)
Message boards :
Questions and problems :
Mac user GPU
(Message 37476)
Posted 13 Apr 2011 by Claggy Post: Read the following thread at Collatz, digest what is needed to get the Cuda app(s) to work on a MAC, get it working, then try the Cuda 4.0 Toolkit and driver to see if still works, there are Cuda22, Cuda31 and Cuda32 apps available, not all worked on the next toolkit/driver. MAC OS X 32-bit CUDA App Claggy |
874)
Message boards :
GPUs :
Zotac ION-GPU-A-E ION Upgrade Kit
(Message 37459)
Posted 10 Apr 2011 by Claggy Post: Thanks for the info Claggy. I was intending to keep the NVIDIA GT 420 but was just wondering if the ION gpu upgrade was something that I could use in addition to the NVIDIA GT 420 card. Thanks for the info and your advice. You would probably find the Ion is too slow for Einstein and GPU Grid, it would probably work at Seti, but would probably only be as fast as a CPU core, if that, Claggy |
875)
Message boards :
GPUs :
Dual gpu problem: 99% utilization hangs two gtx-280s
(Message 37449)
Posted 9 Apr 2011 by Claggy Post: (Btw, for the 2x GTX295 example, one needs at least a 1,050 KW PSU; 700 MW for one 295, half that more for the second.) 1,050 Kilowatt?, 700 Megawatt? According to wikipedia, U.S. nuclear power plants have net summer capacities between about 500 and 1300 MW, so he'll need a Nuclear Power station per GTX280, and a some sort of substation to power the PSU ;-) Claggy |
876)
Message boards :
GPUs :
Zotac ION-GPU-A-E ION Upgrade Kit
(Message 37444)
Posted 9 Apr 2011 by Claggy Post: I wouldn't bother, Ion and Next Generation Ion have less Cuda cores and lower clock and Memory speed than GT420, Check out Nvidia's product info for your GT420, and the Ion, GeForce GT 420 - OEM GPU Engine Specs: CUDA Cores 48 Graphics Clock (MHz) 700 MHz Processor Clock (MHz) 1400 MHz Texture Fill Rate (billion/sec) 5.6 Memory Specs: Memory Clock (MHz) 900 Standard Memory Config 2 GB DDR3 Memory Interface Width 128-bit Memory Bandwidth (GB/sec) 28.8 Next Generation ION GPU Engine Specs: CUDA Cores Up to 16 Memory Specs Standard Memory Configs: 512MB DDR3 512MB DDR2 256MB DDR3 Memory Interface Width Up to 64-bit Zotac spec says: GPU/VPU: NVIDIA ION Memory Type: DDR3 Video Memory: 512MB Stream Processors: 16 Core Clock: 589 MHz Memory Clock: 790 MHz Claggy |
877)
Message boards :
BOINC Manager :
Cannot disable additional work buffer
(Message 37401)
Posted 5 Apr 2011 by Claggy Post: You're got 'Connect about every' set to 0.5 days, that's where the rest of your cache is coming from, you're telling Boinc you're always going to be half a day away from an internet connection, so Boinc will keep that much work on hand, Claggy |
878)
Message boards :
GPUs :
Continues Processing GPU
(Message 37341)
Posted 31 Mar 2011 by Claggy Post: Have the same issue here. When I start using PC, BOINC goes suspend, if I open tasks I see that even though it says suspended - a task is still running in GPU. I set to not use GPU when in use. It's a combination of your slow GPU and the Cuda app, my 128Mb 8400M GS takes around 10 to 11 seconds to suspend a Collatz Cuda task that is running, Claggy |
879)
Message boards :
GPUs :
no usable GPUs?
(Message 37314)
Posted 28 Mar 2011 by Claggy Post: 3/28/2011 1:17:28 AM Starting BOINC client version 6.10.60 for windows_x86_64 That's your problem, uninstall Boinc, reinstall Boinc and don't use the 'Protected application execution' See No GPUs Found for more information. Claggy |
880)
Message boards :
GPUs :
Select a different project for each GPU
(Message 37306)
Posted 27 Mar 2011 by Claggy Post: the only way of doing this (at the moment) is to run two Boinc clients, and disabling one GPU in each client, But it should be possible soon, see this recent Changeset: [trac]changeset:23253[/trac] Claggy |
881)
Message boards :
Questions and problems :
I have no "Ready to Start" tasks under 6.10.58
(Message 37304)
Posted 27 Mar 2011 by Claggy Post: Have you by any chance clicked 'Show active tasks' only?, try clicking 'Show all tasks' Claggy |
882)
Message boards :
GPUs :
Boinc 6.10.60 won't recognize my Nvidea GTS 240 Gpu
(Message 37300)
Posted 27 Mar 2011 by Claggy Post: What type of installation did you do when you installed 6.10.60?, Normal or Protected application executation? Claggy |
883)
Message boards :
Questions and problems :
"slots" folder 7GB and growing
(Message 37279)
Posted 24 Mar 2011 by Claggy Post: The slots folder holds your tasks in progress, finish those tasks and report them and the size will reduce, you may need to increase the space allowed by Boinc to allow that, then try a different mix of projects across your cores, with some that aren't so disk intensive, Claggy |
884)
Message boards :
Questions and problems :
Reinstalled New Computer
(Message 37256)
Posted 21 Mar 2011 by Claggy Post: ?. I said i reinstalled my os to a 64 bit os. So the bionic was not on the drive. Everything was reinstalled. Basically it took like 8 hours to start accepting new work. Did you check at rosetta if they actually had work to send out at that time? Claggy |
885)
Message boards :
GPUs :
Project GPU requirements
(Message 37241)
Posted 20 Mar 2011 by Claggy Post: [table] [tr] [td]ATI/AMD[/td] [td]Windows[/td] [td]Linux[/td] [td]Macintosh[/td] [td]CAL/Brook+[/td] [td]OpenCL[/td] [td]Memory Use GPU[/td] [td]Memory Use PC[/td] [td]Min. driver version[/td] [td]ATI SDK[/td] [td]Comments On Use?[/td] [/tr] [tr] [td]Seti Beta[/td] [td]Y[/td] [td]N[/td] [td]N[/td] [td]Y[/td] [td]N[/td] [td]250MB[/td] [td]N/K[/td] [td]Catalyst 9.x or higher[/td] [td]N/A[/td] [td]Hybrid Astropulse app using a small fraction of the GPU[/td] [/tr] Here's Seti Beta's ATI/AMD table, Claggy |
886)
Message boards :
GPUs :
Project GPU requirements
(Message 37240)
Posted 20 Mar 2011 by Claggy Post: [table] [tr] [td]Nvidia[/td] [td]Windows[/td] [td]Linux[/td] [td]Macintosh[/td] [td]CUDA[/td] [td]OpenCL[/td] [td]Memory Use GPU[/td] [td]Memory Use PC[/td] [td]Min. driver version[/td] [td]Comments On Use?[/td] [/tr] [tr] [td]Seti Beta[/td] [td]Y[/td] [td]N[/td] [td]N[/td] [td]Y[/td] [td]N[/td] [td]254MB reported for Cuda, 384MB reported for Cuda23[/td] [td]N/K[/td] [td]177.35 for Cuda, 190.38 for Cuda23, Cuda Fermi varies per GPU: 197.41 onwards[/td] [td]This Project is for testing future Stock apps for the Main Seti Project[/td] [/tr] Here's Seti Beta's Nvidia table, Claggy |
887)
Message boards :
GPUs :
Project GPU requirements
(Message 37239)
Posted 20 Mar 2011 by Claggy Post: [table] [tr] [td]Nvidia[/td] [td]Windows[/td] [td]Linux[/td] [td]Macintosh[/td] [td]CUDA[/td] [td]OpenCL[/td] [td]Memory Use GPU[/td] [td]Memory Use PC[/td] [td]Min. driver version[/td] [td]Comments On Use?[/td] [/tr] [tr] [td]Seti[/td] [td]Y[/td] [td]N, see comments[/td] [td]N[/td] [td]Y[/td] [td]N[/td] [td]254MB reported for Cuda, 384MB reported for Cuda23[/td] [td]N/K[/td] [td]177.35 for Cuda, 190.38 for Cuda23, Cuda Fermi varies per GPU: 197.41 onwards[/td] [td]Optimised Third party Cuda Seti Multibeam apps are available for Windows and Linux at Lunatics[/td] [/tr] Here's Seti's Nvidia table, Claggy |
888)
Message boards :
GPUs :
Project GPU requirements
(Message 37234)
Posted 20 Mar 2011 by Claggy Post: OK, I am busy with a FAQ for the BOINC FAQs, within the new feature of the tables (yeah! :-D). All I need for it is information. The information above is what's available Stock at Seti, (as opposed to Seti Beta which also has the ATI/AMD Hybrid Astropulse app) Claggy |
889)
Message boards :
GPUs :
Project GPU requirements
(Message 37232)
Posted 20 Mar 2011 by Claggy Post: For Collatz you don't need the Cuda Toolkits for the Windows apps, the drivers themselves add support for Cuda23 and Cuda31, But for the Macintosh Cuda23 app, you do need it, and you must install the following in this order: 1st) CUDA Toolkit: CUDA Toolkit 2.3a for Mac OS 2nd) CUDA Driver: CUDA Driver 2.3.1a For the Macintosh Cuda31 app: 1) do all the apple updates (requires reboot) 2) install 3.1 toolkit 3) install 3.1 driver 4) reboot 5) install manual 3.1 app + app_info 6) reinstall BOINC (required after #5) There's also a Macintosh Cuda32 app linked in that thread, as the Cuda31 app doesn't work with 3.2 toolkit and drivers. Claggy |
890)
Message boards :
GPUs :
Project GPU requirements
(Message 37231)
Posted 20 Mar 2011 by Claggy Post: For Collatz you can put a Y in the Box for Macintosh Anonymous Platform, (Cuda only, no ATI yet) For Einstein's BRP3 Cuda app the requirements are: CUDA driver >= 3.2 (>= 260.00) the earliest 260.xx driver i could find is 260.89 Claggy |
891)
Message boards :
GPUs :
Project GPU requirements
(Message 37229)
Posted 20 Mar 2011 by Claggy Post: On Collatz, for both Nvidia & ATI/AMD you can make Windows Y + AP, and make Anonymous Platform Y for Windows For ATI/AMD you can make OpenCL No, while the app might have been built with SDK 1.3, SDK 1.3 isn't required to run the app, just the driver Rqd, For Nvidia GPU's, Collatz also has a Stock Cuda31 app, i think the minimum is 257.15 for Cuda31 app, and 190.38 for the Cuda23 app, Claggy |
892)
Message boards :
GPUs :
Project GPU requirements
(Message 37189)
Posted 15 Mar 2011 by Claggy Post: Anonymous Platform is also available at Collatz for windows, both ATI/AMD and Cuda, Normally they are sligtly newer than the stock apps, but at the moment are the same, There are also No ATI apps for the Macintosh at all, Claggy |
893)
Message boards :
Projects :
News on Project Outages
(Message 37183)
Posted 15 Mar 2011 by Claggy Post: Setiathome Lab-wide Power Outage Our building's electrical systems are being tested this week. To avoid power surges we will be shutting everything down Tuesday afternoon (after the usual weekly outage) and coming back up Wednesday morning once the tests are finished. All servers/web sites will be down during this time. 14 Mar 2011 | 21:46:40 UTC Claggy |
894)
Message boards :
GPUs :
Project GPU requirements
(Message 37180)
Posted 14 Mar 2011 by Claggy Post: OK, I am busy with a FAQ for the BOINC FAQs, within the new feature of the tables (yeah! :-D). All I need for it is information. Claggy |
895)
Message boards :
GPUs :
Continues Processing GPU
(Message 37121)
Posted 8 Mar 2011 by Claggy Post: Seti doesn't have an ATI application by default, so you're using an anonymous platform file (app_info.xml) to tell BOINC what application to use. It's then the anonymous application that uses the GPU, without BOINC knowing about it. Seti Beta does have a default ATI application, and has had it since 9 Dec 2009 | 0:36:25 UTC: Applications It's Raistmer's old r280 Hybrid Astropulse app, someday Eric might get round to updating it to one of the current versions, i have no idea if that app had any problems with suspending computation, it's been over a year since i ran that particular version. Claggy |
896)
Message boards :
Questions and problems :
full-screen project graphics outside screensave
(Message 37042)
Posted 1 Mar 2011 by Claggy Post: Tasks running conventional ATI and Nvidia applications (non-OpenCL) do not have graphics, since you're using the GPU for calculations. With OpenCL there is the possibility to do graphics at the same time, yet because most projects who use OpenCL applications have their apps done by 3rd party people (people who run the project for a gazillion credits a second), they don't release the graphics app as it slows down the calculations and thus their need to receive the gazillion credits a second. Einstein's Cuda apps do use their screensaver app, probably helps that their Cuda GPU app only loads the GPU to 60%, plenty of time left to run Graphics, Claggy |
897)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 37040)
Posted 1 Mar 2011 by Claggy Post: Catalyst 11.2 is out and has fixed this issue, workaround no longer required, Claggy |
898)
Message boards :
BOINC client :
My Wish List
(Message 37017)
Posted 25 Feb 2011 by Claggy Post: On my wish list is per app DCF for 6.12.x, i've been running a third party version of 6.10.58 with per app dcf for 6 months now, it just works, somewhat better than Seti's and Collatz's server's scaling the <rsc_fpops_est> per app, no knee jerk reaction after 10 validations!!, Claggy |
899)
Message boards :
Questions and problems :
ATI / Nvidia problem??
(Message 36955)
Posted 21 Feb 2011 by Claggy Post: I have a GTX460 and a HD5770 in my PC, GTX460 in the first PCI-X slot, HD5770 in the second, never seen anything like this, What version Catalyst do you have installed?, i assume Cat 10.12 or 11.1, Do you have a Second Monitor plugged into the HD5770, perhaps that splits the HD5770? Claggy |
900)
Message boards :
BOINC client :
Feature request: Make EDF mode Hyper-threading aware
(Message 36938)
Posted 20 Feb 2011 by Claggy Post: You are missing the point of the point I made, but pointless to explain ;-) also Collatz's Boinc Server needed to send the Stock 64bit app to Jesse's host, and not the 32bit non-SSE app, which is probably almost half the speed of the 64bit app, Slicker has in the last day changed things so 64bit hosts only get 64bit apps, Since the collatz Wu is now a 3,000 Credit Wu, the CPU apps were going to be hard pressed to finish in time anyway, Slicker has since then deprecated the CPU apps for the collatz application, and CPU's can only now get Wu's for the mini_collatz application, Claggy |
901)
Message boards :
Questions and problems :
Problem attaching to malariacontrol.net
(Message 36890)
Posted 17 Feb 2011 by Claggy Post: Try logging in using the <authenticator> instead (if you have it), then change the password, Have you got Webmail access at that email account, if you log on you might find filtered Spam messages there, Claggy |
902)
Message boards :
Projects :
News on Project Outages
(Message 36877)
Posted 16 Feb 2011 by Claggy Post: Seti Beta is down, but Seti Main is up. Strange. Seti Beta is up, i've managed to report a few tasks tonight, but the Forums are down still, Claggy |
903)
Message boards :
Questions and problems :
Stolen laptop. Possible to track IP-number via Boinc?
(Message 36872)
Posted 15 Feb 2011 by Claggy Post: Go to Aqua's project's site, make sure you're logged in, look at your 'Account', then at your 'Computers on this Account', Check if that host has reported since being Stolen, then look at 'Host Details', then click at the top, 'Show IP address', this should give you the Internal and External IP address, Claggy |
904)
Message boards :
BOINC client :
Feature request: Make EDF mode Hyper-threading aware
(Message 36870)
Posted 15 Feb 2011 by Claggy Post: I am having tasks run in EDF mode not due to AQUA@home, but due to Collatz. It sent me a non-SSE application to my Core i7 980X which has SSE (because AMD included it in its definition of AMD64 which Intel copied) even though an SSE-optimized application is available, has set the deadline to a way too short time for the non-SSE application, and has given BOINC a way-too-short estimated time to complete. I am sure that the deadline would be easily met if it had correctly sent me the SSE application. I mentioned AQUA@home as a corner case that if not accounted for could fail to run under my proposed change. Slicker already replied to you at Collatz in this message, the non SSE_x64 app and the SSE_x64 app are the same app: There is only one 64-bit app which is the stock app. Because it is x64, it automatically uses x86 intrinsics/assembler and 64-bit integers. The 32-bit SSE app is needed to differentiate between a non-x86 box (e.g. ppc64) which can't use the x64 intrinsics which speed up 64-bit emulation on the 32-bit platform. SSE isn't actually used at all in the app since it doesn't do any floating point math. If your computer is running the 64-bit app, that's as fast as it is going to get. The "SSE" version of the 64-bit apps is a COPY of the non-SSE version since ALL 64-bit versions support not only SSE but also SSE2. It isn't the SSE that speeds it up, but rather being able to use 64-bit integers natively or, on the 32-bit platform, being able to use x86 intrinsics in order to emulate 64-bit integers faster than using straight C code which is required on older 32-bit MACs running on PowerPC (and maybe PS3 boxes if I ever get around to trying to cross-compile for that as well). Slicker has recently made the collatz Workunit 4 times the size as before, so now takes 4 times as long, (this is aimed at GPU's taking less than 10 mins with the old collatz Wu size), and his introduced a mini_collatz Wu that takes half the time of the old collatz Wu, (this is aimed at CPU's and slow GPU's like my 8400M GS), but has reduced the time allowed for both sizes of Wu, But there is no way of setting your preferences to restict the CPU to only doing mini_collatz, (without an app_info) Also introduced at the same time is new Boinc server software, once each app has completed 10 validations, the Server will scale the <rsc_fpops_est> for each new Wu for that app, (your host) meaning over time the predicted runtimes of your ATI and CPU Wu's will improve, You're got a couple of choices, eithier restrict your PC to doing mini_collatz only, stop your CPU doing any Collatz tasks, or do nothing and wait for the Server to scale for your CPU apps, or make an app_info with only mini_collatz for the CPU, and collatz and mini_collatz for the GPU, Claggy |
905)
Message boards :
Questions and problems :
Windows XP3 New ATI/Sapphire Video Card Blue Screen Stop Error
(Message 36813)
Posted 10 Feb 2011 by Claggy Post: I have installed a new video card - an ATI/Sapphire HD3650 AGP 8X on an ASUS P4C800 Deluxe Motherboard; and am now getting Stop/Crash errors while system working on BOINC tasks. Was working fine previously. Update Boinc to the latest recommended build (6.10.58), 6.10.14 was a development build that was quickly superceeded by subsequent builds (30+ in the last year), Update your ATI Catalyst drivers to Cat 11.1, then report back, Claggy |
906)
Message boards :
BOINC client :
Seti@Home Beta keeps on getting new GPU tasks
(Message 36705)
Posted 2 Feb 2011 by Claggy Post: You didn't give us a link to that host, so i had a look at Seti Beta for a user called Ascension, and found this Ascension, with a Win 7 x64 Cuda machine, is it you?, anyway this Win 7 x64 host hasn't had any Wu's since 18 December, a lot of it's Wu's were completed in December, another 40 being completed in January, and so far 4 Wu's have been completed in February, now there are only two Wu's left, which both have a deadline of just 2 hours time at 2 Feb 2011 23:12:49 UTC, So the next question is do you have 'Show only active tasks' clicked?, and you're really had these tasks since Dec 18th and didn't know you had them, Claggy |
907)
Message boards :
Questions and problems :
Question regarding statistics
(Message 36671)
Posted 30 Jan 2011 by Claggy Post: Shut down Boinc, navigate to your Boinc Data folder, right click on statistics_setiathome.berkeley.edu.xml file and choose edit, it should open in Notepad, then remove the whole <daily_statistics> section with the highest value of <day> ie like the section in red, then save the file making sure you over-write the original <project_statistics> <master_url>http://setiathome.berkeley.edu/</master_url> <daily_statistics> <day>1267747200.000000</day> <user_total_credit>4393743.967439</user_total_credit> <user_expavg_credit>13961.886935</user_expavg_credit> <host_total_credit>203.143132</host_total_credit> <host_expavg_credit>20.068715</host_expavg_credit> </daily_statistics> <daily_statistics> <day>2267833600.000000</day> <user_total_credit>4399393.296509</user_total_credit> <user_expavg_credit>13356.551631</user_expavg_credit> <host_total_credit>2060.694604</host_total_credit> <host_expavg_credit>194.763202</host_expavg_credit> </daily_statistics> <daily_statistics> <day>1296345600.000000</day> <user_total_credit>8256138.912163</user_total_credit> <user_expavg_credit>19945.337571</user_expavg_credit> <host_total_credit>2897694.831901</host_total_credit> <host_expavg_credit>16995.238492</host_expavg_credit> </daily_statistics> </project_statistics> Claggy |
908)
Message boards :
BOINC client :
Feature Request: Hierarchical project ordering
(Message 36647)
Posted 28 Jan 2011 by Claggy Post: You could increase your cache setting to a couple of days, then you are unlikely to run out of work, At your backup project, set your Resource share to Zero, then you should only get work when Seti has none, (Check on your backup projects Forum's if they support a Resource share of Zero, if not set it to One, and set Seti's to say, a 1000) Claggy |
909)
Message boards :
Questions and problems :
BOINC using only 15/24 CPU cores
(Message 36646)
Posted 28 Jan 2011 by Claggy Post: What projects are you attached to? what projects do the GPU's get work from? Do this happen with any particular combination of work? Claggy |
910)
Message boards :
Questions and problems :
linux boinc not connecting to localhost
(Message 36375)
Posted 8 Jan 2011 by Claggy Post: You don't say what your last GPU was, or wether you uninstalled it's drivers, or what version of Boinc you're using, if you're got Nvidia drivers installed, uninstall them. Under windows, if you had Nvidia and ATI drivers (later than Cat 10.3) both installed (and/or GPU's present) recent boinc clients would then crash on start, and if you tried to do any offline runs on ATI apps they would crash too, under Windows the latest version of Boinc detects the ATI SIGGEV violation, and then will ignore the ATI GPU, so allowing the client to start and the Manager to connect to it, If you're not running the latest recommended version, try Boinc 6.10.58 Claggy |
911)
Message boards :
Questions and problems :
Problems with cuda and projects....
(Message 36322)
Posted 3 Jan 2011 by Claggy Post: links to your host at these projects would help, Claggy |
912)
Message boards :
Questions and problems :
boinc tray access not working
(Message 36224)
Posted 27 Dec 2010 by Claggy Post: Does Boinc.exe even try and start when you start Boinc Manager? Watch task manager when you start Boinc Manager. Claggy |
913)
Message boards :
Questions and problems :
Unusual request for project mixing
(Message 36183)
Posted 22 Dec 2010 by Claggy Post: My ATI FirePro V4800-based QuadCore desktop is running the Collatz Conjecture very quickly on the GPU but relatively slowly on the CPU. Because I value more highly some of the biological research platformed on BOINC, I would prefer to run Collatz on the GPU only, while simultaneously (not switched) running a project like Rosetta@home on the CPU cores, as Rosetta does not run on this GPU. Just go to your Collatz Preferences and set use CPU to No: Use CPU No (enforced by 6.10+ clients) You have four differerent venues (at each project) so you can set different sets of computers to do different combinations of work. Claggy |
914)
Message boards :
Questions and problems :
Trojan found in Boinc Data
(Message 36175)
Posted 21 Dec 2010 by Claggy Post: setiathome_6.03_windows_intelx86.exe is the Stock CPU app for Setiathome Enhanced Multibeam tasks and a has been in use for a couple of years now, Claggy |
915)
Message boards :
BOINC client :
Can I run GPU's
(Message 35978)
Posted 5 Dec 2010 by Claggy Post: By looking at each project's application page, like Seti's: applications or you could look here: Choosing BOINC projects or look through the Boinc wiki: Project list Claggy |
916)
Message boards :
News :
Orbit@home enters production mode
(Message 35900)
Posted 27 Nov 2010 by Claggy Post: If you go and read Pasquale's last post, there isn't going to be any work until the end of November: Just a quick update: I'm afraid no new WUs will be generated this week or the next. I've been partially sidetracked by a forthcoming meeting (next week), not related to orbit@home, so we are now talking about new WUs around the end of November 2010. So there's likely to be work soon, Claggy |
917)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 35873)
Posted 25 Nov 2010 by Claggy Post: hello, I have the Catalyst 10.2 and forceware 260.99 but I have several crash problems with the latest games (need for speed, cod, etc.), so I urgently need to update the catalyst. You assured me that renaming aticfx32.dll and aticfx64.dll, boinc will elaborate and the games will not crash? Because I do not want unnecessary problems with drivers... No, renaming aticfx32.dll and aticfx64.dll might allow you to use the ATI GPU with Boinc, so it detects the ATI GPU correctly, and/or doesn't trash it's work, Side effects seem to be it removes DirectX support from the ATI GPU, and Aero effects across both GPU's, If you need to update your Catalyst drivers to a more recent version, do so, but you may need to disable ATI GPU use in Boinc, eithier by deselecting at your ATI projects: Use ATI GPU if present yes (enforced by 6.10+ clients) or making a cc_config.xml with the following in it: <cc_config> <options> <ignore_ati_dev>N</ignore_ati_dev> </options> </cc_config> Where N is the ATI device no, 0 if you only have one ATI device. Claggy |
918)
Message boards :
Questions and problems :
Is this normal?
(Message 35831)
Posted 21 Nov 2010 by Claggy Post: What have you got the following set to in your computing preferences?: On multiprocessors, use at most: 100% of the processors Enforced by version 6.1+ Use at most: 100% of CPU time Can be used to reduce CPU heat Claggy |
919)
Message boards :
Questions and problems :
Boinc GPU Wont Stop
(Message 35780)
Posted 17 Nov 2010 by Claggy Post: What you could do is switch to Anonymous platform at Collatz, then you could use the command parameters to reduce the load on the GPU, (i used them to increase the load, but it made my display too laggy, so reduced them a bit) the default parameters are <cmdline>L5 I8 S1</cmdline>, while for GPU's with poor responce the recommended is: <cmdline>L3 I5 S1</cmdline> i'm running <cmdline>L10 I7 S1</cmdline> Claggy Edit: the other good thing about using Anonymous platform is it overides the GPU memory restriction, so you can get work, then as long as your GPU still has enough Ram available to run the app, it'll work. |
920)
Message boards :
Questions and problems :
Boinc GPU Wont Stop
(Message 35776)
Posted 17 Nov 2010 by Claggy Post: Which preferences are you using and updating? I'm also running Boinc 6.12.6, with a 128Mb 8400M GS, similiar speed to your 9400m, but using Windows, i'm also running Collatz GPU tasks, i've just tried out the 'Use GPU when computer is in use' local preference, it does suspend here, BUT, the collatz GPU task does run until it reaches it's next checkpoint, this takes up to 11 seconds, (unlike my 9800GTX+ and HD5770 which are near instant), i suggest you try another project's GPU app, and report back, Claggy |
921)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35661)
Posted 9 Nov 2010 by Claggy Post: I'm in the process of Updating them all to v6.12.4, that should do me until the 6.15.xx comes out ... lol I would have thought the fix of the gpu_active_frac bug would be enough to warrant upgrading to 6.12.5, If the Boinc client and apps aren't shutting down when you exit the Manager, have you by any chance unticked the option 'Stop running science apps when exiting the manager'?, you'll have to Enable the 'Manager exit dialog' to see that option, (Tools > Display and Network Options) Claggy |
922)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 35633)
Posted 6 Nov 2010 by Claggy Post: I just tried the work around with ati 10.10 and nvidia 260.99 drivers and lost all direct x function, but boinc saw both cards. The cards being gtx470 and hd5850. What does Dxdiag.exe say? On my system, which has the 9800GTX+ as the primary card, DirectX is available on it, while the Secondary card (HD5770) shows DirectX features as unavailable, DDI version as unknown, and Monitor as x (not surprised as there's no monitor connected) Since i used the work around i've also lost the Aero effects, Claggy |
923)
Message boards :
Questions and problems :
Suspending computation - CPU usage is too high
(Message 35597)
Posted 2 Nov 2010 by Claggy Post: Seti has been having Server problems and aren't dishing out work until new servers are in place, probably another 3 weeks, uploads and the scheduler have been up, but downloads are disabled, See News, and Technical News at their site: SETI@home Message boards So join another project in the meantime, unless you already have, Claggy Edit: It's also Tuesday, when Seti do their database backup and system maintenance. |
924)
Message boards :
Questions and problems :
Suspending computation - CPU usage is too high
(Message 35594)
Posted 2 Nov 2010 by Claggy Post: Which project are you having trouble downloading from? are they online? Claggy |
925)
Message boards :
Questions and problems :
Suspending computation - CPU usage is too high
(Message 35592)
Posted 2 Nov 2010 by Claggy Post: I've been getting a message of temporarily failed download for two days. Also, computation suspende and communications deferred. Seemed to have started when I installed 6.10.58. Anyone else having this problem???? Set the following in your Computing Preferences to eithier Zero to disable it, or to a higher figure, Suspend work if CPU usage is above 25 % 0 means no restriction Enforced by version 6.10.30+ Claggy |
926)
Message boards :
BOINC Manager :
installing and connecting problems
(Message 35550)
Posted 30 Oct 2010 by Claggy Post: You're confusing 2 things: The Boinc Folder? Which Boinc Folder where you looking in? The Boinc Program Install Folder?, Or the Boinc Data Folder? Which is where 'stderrdae.txt' would be. Claggy |
927)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 35422)
Posted 25 Oct 2010 by Claggy Post: I just tried with 10.10 and it does not relieve the vga ati in boinc, but at least it connects to localhost and elaborates on the nvidia, I put the 10.2 and should be ok. Or you could try the work around posted earlier? ;-) Claggy |
928)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 35395)
Posted 24 Oct 2010 by Claggy Post: something new, or are we still waiting? Cat 10.9 might have fixed this issue, haven't tried it yet, will undo the workaround and try soon, Claggy |
929)
Message boards :
Questions and problems :
BOINC cannot communicate
(Message 35302)
Posted 19 Oct 2010 by Claggy Post: Just reloaded XP Pro and re-installed BOINC v6.10.58 running only SETI, but have not been able to upload or download since re-install. Thanks for the help. Read the Project homepage: Projects are down due to a database machine crash. Claggy |
930)
Message boards :
Questions and problems :
Unable to get BONIC to use only 1 GPU
(Message 35283)
Posted 18 Oct 2010 by Claggy Post: Sorry, i didn't notice, the cc_config.xml needs to placed in the Boinc Data directory, not the Program Install location, the exact location is shown in your Startup messages, the folder is likely to be hidden, so you'll need to unhide it, Claggy |
931)
Message boards :
Questions and problems :
Unable to get BONIC to use only 1 GPU
(Message 35281)
Posted 18 Oct 2010 by Claggy Post: You're got an extra < in the <<ignore_cuda_dev>1</ignore_cuda_dev> line You don't say what version of Boinc you're using, you'll need Boinc 6.10.19 or later, reading from the config file won't work for this, you'll need to fully restart Boinc. Claggy |
932)
Message boards :
Questions and problems :
Custom computer with ATI & Nvidia
(Message 35203)
Posted 12 Oct 2010 by Claggy Post: Maybe, depends which driver combination you use, do have a look at the other threads about Nvidia & ATI's GPU's in the same computer, and problem threads about ATI GPU's, Claggy |
933)
Message boards :
Questions and problems :
ATI GPU + Nvidia GPU at the same time. Boinc says the GPU is missing.
(Message 35182)
Posted 11 Oct 2010 by Claggy Post:
Games are run through the 9800GTX+, the HD5770 doesn't have a monitor connected to it, and is only used for crunching, Seti mostly, I'd swap the cards physically around on my M/B, but there isn't enough room for the 9800GTX+ in the bottom slot, SATA connections being there too. Claggy |
934)
Message boards :
Questions and problems :
BOINC Manager Exit Confirmation screen
(Message 35178)
Posted 11 Oct 2010 by Claggy Post: In Boinc Manager, click 'Advanced', then 'Options', then tick 'Enable Manager exit dialog', then O.K. Claggy |
935)
Message boards :
Questions and problems :
ATI GPU + Nvidia GPU at the same time. Boinc says the GPU is missing.
(Message 35176)
Posted 11 Oct 2010 by Claggy Post: You don't say what version drivers you're using, you could try Cat 10.9 and see if that fixes this issue, not tried it myself yet, or you could try this work around: Regression: CAL samples not working with a Nvidia GPU on Windows 7 Claggy Win7 64bit Main GPU = XFX 9800GTX+ 512MB Black Edition Secondary GPU = XFX HD5770 1GB |
936)
Message boards :
Questions and problems :
Reusing old hardware
(Message 34963)
Posted 26 Sep 2010 by Claggy Post: Wondering what the best O/S would be for running BOINC on old hardware? A while ago there was mention of running it from a USB drive, but don't know if that included the O/S. I'd say Dotsch/UX: Dotsch/UX - A USB/Diskless/Harddisk BOINC Ubuntu Linux Distribution Dotsch/UX a Linux distribution, based on Ubuntu Linux. The purpose is to make a Linux distribution for BOINC which boots as Live CD, easily installs and boot from a USB stick, hard disk and from diskless clients and also has some interfaces to setup the diskless server and the clients automatically. Features & Facts : • Small memory usage : The OS requires about 64 MB plus the memory for the BOINC client and BOINC science application. The graphical GNOME desktop requires about 128 MB more. In general the memory depends strongly on the project(s) you would like to crunch... Recommended minimum 128 MB for diskless, HDD and USB Stick based systems and 256 MB for disksless servers. Strongly recommended >256 MB for text console only, >512 MB with Desktop, and additional 128 MB more for a diskless server system • Small disk usage : The distribution fits on a 1 GB USB stick, but 2 GB would be good for multi BOINC project crunching. The HDD installation requires about 2.5 GB, and the diskless server requires 1.5..1.7 GB per architecture plus 1.5...1.7 GB for each diskless client you would add. • Easy installation : The OS could be easily installed by several included tools on a USB stick, hard disk, and setup as server for diskless clients. • Server for Diskless clients : The server and diskless clients could easily installed with several included tools. Only the main configuration parameters must be specified, the diskless server and clients installs automatically. • Additional proxy server : Preconfigured proxy server, which allows to separate the BOINC USB, diskless and HDD systems in an isolated network, and communicate through the proxy server with the science project servers • Ubuntu based : As Dotsch/UX is based on Ubuntu, you can also install additional Ubuntu packages or update to your USB/HDD/Diskless systems. Also the Ubuntu documentation, WIKIs and forums are adaptive due the technical adjacency of Dotsch/UX and Ubuntu. • BOINC Client : The BOINC client comes pre installed and would be started as daemon and would be monitored and kept alive from this daemon. Dotsch/UX 1.0 includes the BOINC client 6.2.15. Dotsch/UX 1.1 includes the BOINC client 6.4.5 for CUDA support and Dotsch/UX 1.2 includes version 6.10.17. • Graphical Desktop and text console : If you like, you can choose between the text console (for lower memory requirements) or the graphical GNOME Desktop. • SSH : ssh login per default preconfigured. • 32+64 bit distribution : A distribution of 32 bit (386) and 64 bit (x64) is available. Since Dotsch/UX 1.1 it‘s possible to add mixed 32 and 64 bit diskless clients on the same diskless server. • CUDA : Since Dotsch/UX 1.2, the NVIDIA CUDA drivers are included and preconfigured by default. A CUDA installer is also included to reinstall CUDA, if it would been required. A CUDA installation state tools is included, too. • Integrated Backup : A Client/Server Backup solution to backup all Dotsch/UX systems over a network is included since release 1.2. Also Backups to a local destination is also possible. • Performance Monitoring : The HPC/HA Cluster Grid Client/Server performance monitoring tool Ganglia was introduced in 1.2. • Live CD persistent home directory : A USB stick or disk can be configured in the Live CD as persistent home directory. All data in the home directory would been stored on the USB stick • Reduced energy : A hard disk drive requires about 5 to 10 W energy. Calculated for a permanent running system (365 days) and 0,20 Euro/KW per hour, each removed HDD saves about 44 KWh..88 KWh per year = 8...17 Euro per year. A USB stick uses about 0,1..0,9 Watt = 0,8...7 KWh per year => 0,2...1,75 Euro costs per year. For a diskless installation it depends on the setup. Breakthrough is reached, when more diskless clients are installed, than hard disks in the diskless server are used. Available from Dotsch's Site: Dotsch/UX Claggy |
937)
Message boards :
BOINC Manager :
GPU snooze timer
(Message 34922)
Posted 25 Sep 2010 by Claggy Post:
It was introduced in Boinc 6.10.57: •boinccmd: Add --set_gpu_mode to command line tool. So upgrade to to the latest Recommended version. (6.10.58) Claggy |
938)
Message boards :
Questions and problems :
Boinc claims no free space with 10Gb+ free disk
(Message 34834)
Posted 22 Sep 2010 by Claggy Post: free, not available to BOINC: 32.9GB Then some other program is reserving that 32.9GB, Check the OS for page file size again, and check any other program that might reserve HD space for it's operation. You can always uninstall Boinc, move your Boinc Data directory to your other drive, then reinstall Boinc, pointing it to the New Data location, and see what happens then. Claggy |
939)
Message boards :
Questions and problems :
Boinc claims no free space with 10Gb+ free disk
(Message 34827)
Posted 21 Sep 2010 by Claggy Post: O.K, what happens if you set the figures to the following: Use at most 10 GB disk space Leave at least 0.1 GB disk space free (Values smaller than 0.001 are ignored) Use at most 50% of total disk space Claggy |
940)
Message boards :
Questions and problems :
Boinc claims no free space with 10Gb+ free disk
(Message 34822)
Posted 21 Sep 2010 by Claggy Post: that made it worse, then the max disk usage is 0.15GB instead of 0.26GB Which takes us back to: free, not available to BOINC: 32.9GB Is the free space not really free then, is it being used by the OS for swap space or something? What have you got 'Use at most xx.xx % of page file (swap space) set to? mine's set to 75% Claggy |
941)
Message boards :
Questions and problems :
"only when computer is idle" doesn't work.
(Message 34821)
Posted 21 Sep 2010 by Claggy Post: Hello. I'm just posting to reiterate the bug. I'm running Ubuntu 10.04 with Boinc 6.10.17 and the only way it recognizes user input is 1) keyboard inputs into the terminal (not into any other program, that I can find) or 2) when I first boot, Boinc will correctly recognize all keyboard and mouse (both connected via USB) inputs. If Boinc 6.10.17 had this Bug 10 months ago, then it'll still have it now, try a later version, 6.10.58 being the current recommended version, Claggy |
942)
Message boards :
Questions and problems :
Boinc claims no free space with 10Gb+ free disk
(Message 34818)
Posted 21 Sep 2010 by Claggy Post: all reported so far where the local preferences What happens if you Clear the local preferences? is it worse?, or does it fix the problem? Claggy |
943)
Message boards :
Questions and problems :
Boinc won't start
(Message 34811)
Posted 21 Sep 2010 by Claggy Post: When I try to start boinc.exe all I get is a window with a blinking cursor, and after about 10 seconds it goes away. When i start Boinc.exe, i get what is normally displayed in the Messages tab in the DOS window, and in Task Manager i get a Cuda app, an ATI app, and two CPU apps start, I suspect it's your client_state.xml file that's got corrupted, Boinc.exe can't make any sense of it and closes/crashes, So first things first, Make a Backup of your whole Boinc Data directory, and put it somewhere safe, then try restoring client_state.xml from client_state_prev.xml, if that doesn't work, try restoring client_state.xml from client_state_old.xml, you'll probably loose a few or a lot of Wu's with this approach, so it might be better to wait for Ageless to comment first. Claggy |
944)
Message boards :
Questions and problems :
Boinc won't start
(Message 34807)
Posted 21 Sep 2010 by Claggy Post: And yes, it does show in the Task Manager. Do any project apps start?, like 'setiathome_6.03_windows_intelx86.exe' ? Claggy |
945)
Message boards :
Questions and problems :
Boinc won't start
(Message 34803)
Posted 21 Sep 2010 by Claggy Post: Claggy - No tasks start because as soon as I launch Boinc I get Communication message that never goes away. The message comes up before any tasks appear in the Boinc Manager. I said Boinc.exe, NOT Boinc Manager (boincmgr.exe). Boinc is made up of three programs, Boinc.exe (aka the Boinc client), this does all the work, and Boinc Manager (the GUI program), this starts Boinc.exe, then connects to Boinc.exe, and displays/controls what Boinc.exe does, and doesn't have to be running for work to progress, and Boinctray.exe, this monitors Mouse and keyboard activity for suspending CPU/GPU use, etc. If you trawl around to C:\Program Files\BOINC and try starting Boinc.exe, what happens?, do any project apps start? (Watch Task Manager) Claggy |
946)
Message boards :
Questions and problems :
Boinc won't start
(Message 34790)
Posted 21 Sep 2010 by Claggy Post: First of all - Thank you for your assistance. When you run Boinc.exe by hand, do any tasks start? Claggy |
947)
Message boards :
Questions and problems :
Boinc won't start
(Message 34749)
Posted 19 Sep 2010 by Claggy Post: Have you tried a reboot? Claggy |
948)
Message boards :
Questions and problems :
Boinc claims no free space with 10Gb+ free disk
(Message 34742)
Posted 19 Sep 2010 by Claggy Post: Mine says "max disk usage: 0.29GB". I have not been able to find out where this limit is defined. The machine preferences are set to 10GB, the project preferences at the web site dialogs were currently set to 6GB. How big is the hardrive? and what are the other two preferences related to Disk usage set to? Claggy |
949)
Message boards :
Questions and problems :
GPU trouble (8800 GT)
(Message 34690)
Posted 16 Sep 2010 by Claggy Post: I just updated my driver to the most recent one. I proved Collatz worked on 128MB GPU's, so Collatz lowered the Memory requirement to 126Mb, i think they have lowered it to 112Mb now, not too sure (because of Nvidia's 197.xx and later drivers reporting less memory), Haris Dublas has since reported he could get Collatz's Cuda apps to run on his 8200 GPU with it's memory set in the Bios to only 64Mb, Claggy |
950)
Message boards :
Questions and problems :
How to disconnect from projects without having tasks still in progress.
(Message 34638)
Posted 12 Sep 2010 by Claggy Post: Just set No New Tasks on each project, you'll have to click update on each project to report your completed work, as Boinc won't be asking for work any more, Claggy |
951)
Message boards :
Questions and problems :
Quad Processor - Only "one" quad used
(Message 34630)
Posted 11 Sep 2010 by Claggy Post: What project was the initial problem on? Did you have enough tasks? Claggy |
952)
Message boards :
Projects :
News on Project Outages
(Message 34627)
Posted 11 Sep 2010 by Claggy Post: Seti and Seti Beta are down: The air conditioning in our server closet failed this morning, causing several of our important systems to overheat. The servers have since been shut down, but until we survey the damage and address these cooling issues all parts of the project will remain offline. Claggy |
953)
Message boards :
Questions and problems :
Quad Processor - Only "one" quad used
(Message 34593)
Posted 9 Sep 2010 by Claggy Post: What version of Boinc? Older versions use a different preference: On multiprocessors, use at most 4 processors (used on Boinc 5.x.x) On multiprocessors, use at most 100% of the processors Enforced by version 6.1+ When you say only one of its four quads, does that mean you have 4 Quad Processors, as in, 16 cores? Claggy |
954)
Message boards :
Questions and problems :
cannot connect to internet
(Message 34586)
Posted 8 Sep 2010 by Claggy Post: Seti is in the middle of it's weekly three day outage: Weekly Outage and Initial Catch Up Claggy |
955)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 34583)
Posted 8 Sep 2010 by Claggy Post: Already done, see my thread on the ATI Stream Forum, Unlikely to be next release, AMD/ATI has a release cycle, they'll have to a fix it first, test it, test it some more, maybe tweak it, test it, etc, so it'll be a couple of releases before it appears, Claggy |
956)
Message boards :
Questions and problems :
Can't get both GPU's working with SETI
(Message 34550)
Posted 7 Sep 2010 by Claggy Post: The only folder I could find is the C:\Program Files\BOINC. I didn't see any dir in there called data. Where is the data dir in windows 7 64x? The Bold text is where the Boinc Data directory is, it will be hidden, so you'll have to unhide it. Claggy |
957)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 34549)
Posted 7 Sep 2010 by Claggy Post: is there a way to notify developers of ati driver or BOINC developers to solve this problem? Already done, see my thread on the ATI Stream Forum, Claggy |
958)
Message boards :
Questions and problems :
Information for new installation + information about tasks
(Message 34527)
Posted 5 Sep 2010 by Claggy Post: Actually I've got multiple questions: a) This is best asked in Number Crunching on the Seti forum, and not at the Boinc forum, b) In your computing preferences change the following: Maintain enough work for an additional to 4 days c) All your configuration files and data files are in the Boinc Data folder, you can find the location from your Boinc startup messages, the folder will be hidden, so you'll need to unhide it, make sure you back up the whole folder, when you reinstall you can eithier put the Boinc Data folder back where you found it, then install Boinc, or you can put it in new location and direct the installer to the new location, if you restore the Boinc Data folder after you've installed Boinc, the folder permissions won't be right, a repair install will fix those, Claggy |
959)
Message boards :
Questions and problems :
BOINC only sees one of two GPUs - ATI and Nvidia - help :)
(Message 34435)
Posted 30 Aug 2010 by Claggy Post: See this thread: problems with ATI 10.3 Claggy |
960)
Message boards :
Questions and problems :
GPU constantly runs
(Message 34415)
Posted 29 Aug 2010 by Claggy Post: No, and even if I select 'never use the GPU' on that menu it will continue to run. I should also add that the problem is intermittent. Which project? and what version Cuda app is doing this? Claggy |
961)
Message boards :
Questions and problems :
BOINC 6.10.58 released to public
(Message 34309)
Posted 21 Aug 2010 by Claggy Post: BUG Report - manager seems to be tripping over it's own feet! No, it's not a Bug, it's a new feature, go to your computing preferences at one of your projects, and set the following to Zero to disable it: Suspend work if CPU usage is above 0 means no restriction Enforced by version 6.10.30+ 0 % and if you do want your computer to suspend computation when you're doing something intensive on the computer, then set it to a higher value, Claggy |
962)
Message boards :
Questions and problems :
BOINC and Windows 7 aero problem
(Message 34270)
Posted 17 Aug 2010 by Claggy Post: and with attitude like that, you won't get help from others eithier, Claggy |
963)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 34267)
Posted 17 Aug 2010 by Claggy Post: I have a fix, Rename aticfx32.dll to aticfx32_temp.dll and aticfx64.dll to aticfx64_temp.dll in System32 and SysWOW64 folders, See: Regression: CAL samples not working with a Nvidia GPU on Windows 7 I've now successfully run Astropulse Hybrid ATI Brook+ apps, 2 different Astropulse OpenCL apps, HelloCL and CLinfo apps, all with my Nvidia GPU still fitted and latest drivers installed, and Boinc now detects the HD5770 with Cat 10.7 without disabling it, GPU-Z also no longer Crashes when SDK installed, here's my host at Collatz (not done any tasks with Cat 10.7 yet): hostid=20542 Claggy |
964)
Message boards :
Questions and problems :
BOINC and Windows 7 aero problem
(Message 34227)
Posted 15 Aug 2010 by Claggy Post: Try updating to Boinc 6.10.58, the latest Release Build, Claggy |
965)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 34222)
Posted 14 Aug 2010 by Claggy Post: I've tried Cat 10.7, combined with Forceware 258.96, same as before, i can install both sets of drivers O.K, Boinc 6.10.58 at least starts now, but disables ATI GPU, offline runs of Hybrid ATI Astropulse Brook+ apps still crash, With SDK_2.2 installed, offline ATI OpenCL Astropulse apps crash too, Cuda apps always work no problem, reverted back to Cat 10.2 again, Brook+ apps work again, Claggy |
966)
Message boards :
BOINC client :
Cpu preferences
(Message 34193)
Posted 13 Aug 2010 by Claggy Post: That's the nature of the Boinc client, it will only do GPU tasks in FIFO (First In, First Out) order, unless there's possible deadline problems, it'll do tasks that aren't in obvious deadline trouble, but might be in another few days/weeks/etc, before it'll switch over to tasks that are getting close to deadline, the way round it is to run a smaller cache, or just run one GPU project at a time, Claggy |
967)
Message boards :
BOINC client :
Cpu preferences
(Message 34191)
Posted 13 Aug 2010 by Claggy Post: Yea got the bit on the website, but the local client, how do you configure that to run the selected location? On the client, click update for each project, it'll see it's location has changed, and use those preferences, Just make sure you've set up preferences for each project for that location, ie, SETI@home preferences, Collatz Conjecture preferences Claggy |
968)
Message boards :
BOINC client :
Cpu preferences
(Message 34187)
Posted 13 Aug 2010 by Claggy Post: Go to your 'Your computer' page, then on the left, underneath where it says Computer ID, there's links to each computer's Detail's page, and tasks page's, click where it says 'Details' At the bottom of the Details page change the Location selection to the location desired, then click update, Claggy |
969)
Message boards :
BOINC client :
Cpu preferences
(Message 34185)
Posted 13 Aug 2010 by Claggy Post: Yea saw it on there, how do I tell the local clients which profile to use? Select whichever location you want for each computer on the Computer Details page, then on the client, select the project, and click update, if it worked, then in the messages tab there will be a message about the new location, Claggy |
970)
Message boards :
BOINC client :
Cpu preferences
(Message 34182)
Posted 13 Aug 2010 by Claggy Post: Cheers, how do I set each PC to a location?, i.e have the PC with the ATI card as home and the PC crunching on the CPU to work? Go to your computer's Details page at each project, right at the bottom is a location selection, Claggy |
971)
Message boards :
BOINC client :
Cpu preferences
(Message 34179)
Posted 13 Aug 2010 by Claggy Post: You're got a total of 4 venues, move which ever PC you want to have different preferences to an unused venue at each project, then go and set for that venue computing preferences and project preferences to suit. Claggy |
972)
Message boards :
Questions and problems :
Can't Install BOINC in Win 7-64x
(Message 34173)
Posted 13 Aug 2010 by Claggy Post: Try downloading it again, Claggy |
973)
Message boards :
GPUs :
Problem with two GPUs
(Message 34089)
Posted 8 Aug 2010 by Claggy Post: Hi, this problem has been solved? I don't know if it's been fixed with Cat 10.7, it hadn't been with Cat 10.6, What PCI-X slots are the ATI and Nvidia GPU's in?, i've seen reports of it working when ATI GPU is in first slot, but not tried it yet, hopefully I'll try Cat 10.7 and a GPU swap today, Claggy |
974)
Message boards :
Questions and problems :
Keep losing automatic startup at reboot
(Message 34079)
Posted 5 Aug 2010 by Claggy Post: No Probs, anything to help, Claggy |
975)
Message boards :
Questions and problems :
Keep losing automatic startup at reboot
(Message 34069)
Posted 5 Aug 2010 by Claggy Post: Do you shut down Boinc before you reboot? Claggy |
976)
Message boards :
Questions and problems :
Second GPU disappeared... need info how to force redetect.
(Message 33836)
Posted 19 Jul 2010 by Claggy Post: Try plugging a Monitor into it, then extend the desktop onto it, then the Monitor should no longer be needed, Claggy |
977)
Message boards :
BOINC client :
6.11.1 Released to Beta - Notes?
(Message 33806)
Posted 17 Jul 2010 by Claggy Post: Would be nice to have a snooze CPU function as well. Sometimes we just want to use the CPU for other programs, but would prefer to allow the GPU to crunch. Presently the only way to do this is suspend individual projects and then restart them. However some projects use both CPU and GPU (well, did at one stage). Yes, but we'd like to be able to suspend CPU tasks only, (as opposed to CPU usage) GPU tasks will still keep crunching as long as you only run programs on the CPU with a low priorty, Like last night i did some video encoding for my PSP, i had to suspend all my CPU projects like CPDN and Einstein, and all my Seti CPU tasks while leaving GPU tasks unsuspended, since GPU tasks tend to have a thread that runs at a higher priorty to feed the GPU, as long as i ran my encoder at low priorty, the GPU ran at full or close to full speed, Claggy |
978)
Message boards :
Questions and problems :
Can't retrieve current status
(Message 33751)
Posted 12 Jul 2010 by Claggy Post: I run a 9800GTX+ and a HD5770 on my Windows 7 Desktop, the last Catalyst driver that works in this configuration is Cat 10.2, anything newer causes the Boinc client to crash, Claggy |
979)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 33131)
Posted 30 May 2010 by Claggy Post: Still the same with Boinc 6.10.57, Catalst 10.5, 257.15 and SDK2.1, Boinc client crashes on start, ATI Brook+ and OpenCL apps crash, GPU-Z also crashes, revered back to Cat 10.2, Brook+ apps work again, ATI OpenCL apps don't, Claggy |
980)
Message boards :
Questions and problems :
what does additional work buffer mean?
(Message 33130)
Posted 30 May 2010 by Claggy Post: I've never gone out of the way to figure out if the connect interval space is additive to the buffer setting or inclusive, I.e. if 0.5 days connect and 1.0 days buffer setting, does that cause 1.5 days being cached on the host? Think not, it just working to keep at least 1.0 days worth on client, but the pros may confirm. Always being connected anyway seems to pretty much ignore the connect setting, thus have set that value to 0.0 which makes thinking cache size all the more easy. It is additive, I'm running a 14 day Cache (4+10) on my laptop, just so it can get enough Astropulse Wu's to tide it over any outages, splitters being offline, etc, Claggy |
981)
Message boards :
Questions and problems :
Windows 7 Issues
(Message 33001)
Posted 25 May 2010 by Claggy Post: Check your power settings, My Windows 7 desktop was going to sleep after an hour or so. Claggy |
982)
Message boards :
GPUs :
Problem with two GPUs
(Message 32948)
Posted 22 May 2010 by Claggy Post: Uninstall Cat 10.4, install Cat 10.2 and it'll work, I couldn't get Boinc 6.10.x to work with Cat 10.4 and 197.25/.57 on Win 7 64bit eithier, GPU-Z would also crash, also Brook+ and ATI OpenCL apps would crash, Boinc 6.10.x will also work O.K with Cat 10.4 if your remove the Nvidia GPU and drivers. see: problems with ATI 10.3 your cc_config.xml should look like this, Extra spaces tend to have undesirable effects: <cc_config> <log_flags> </log_flags> <options> <use_all_gpus>1</use_all_gpus> </options> </cc_config> Claggy |
983)
Message boards :
Questions and problems :
Why Boinc features become broken??
(Message 32928)
Posted 21 May 2010 by Claggy Post: Later Boinc 6.10.x versions don't dump Wu's when GPU's removed, their status messages just say GPU missing, what version was it that suddenly failed to recognize CUDA cards? On what lists do you see these reports? Claggy |
984)
Message boards :
Questions and problems :
seti, collatz and cuda
(Message 32891)
Posted 19 May 2010 by Claggy Post: It could be because GPU tasks are done FIFO order, and you haven't got to the Seti Cuda tasks yet, or it could be because of Boinc 6.10.43, and the 197.xx drivers (which report less total RAM) Boinc 6.10.43 has a GPU work fetch bug, it'll report enough GPU RAM to get Cuda work, but not enough is available at run-time to actually run the application without crashing, Claggy |
985)
Message boards :
Questions and problems :
Matching drivers to operating systems
(Message 32826)
Posted 15 May 2010 by Claggy Post: I've asked Nvidia on their Cuda GPU Computing Forum about what's changed with 197.xx drivers, but had no reply. Cuda-Z and Boinc report less Memory with 197.xx drivers Claggy |
986)
Message boards :
Questions and problems :
BOINC 6.10.43/6.10.44 no longer released for public
(Message 32809)
Posted 15 May 2010 by Claggy Post: See the first post of this thread, Boinc 6.10.43/6.10.44 was pulled because of a Bug, and the recommended version reverted back to 6.10.18 again. Claggy |
987)
Message boards :
BOINC client :
Boinc Manager not shutting down GPU Tasks
(Message 32689)
Posted 9 May 2010 by Claggy Post: Hi, Which Boinc version?, Which Project?, what app version?, What GPU?, have you checked both your Web based computing preferences, and your Local preferences (which over-ride Web preferences) Claggy |
988)
Message boards :
Questions and problems :
problems with ATI 10.3
(Message 32688)
Posted 9 May 2010 by Claggy Post: I'm seeing the same thing with Boinc 6.10.45_64 and Win 7 64bit, been running O.K with Cat 10.2 and 197.25, but needed to upgrade to Cat 10.4 to test an OpenCL app, got it installed, but Boinc wouldn't start, GPU-Z crashes and so does the app under test, uninstalled 10.4, GPU-Z works, Boinc doesn't, uninstalled 197.25, installed 197.57, no change, reinstalled 10.4, no change, uninstalled 10.4, installed 10.2, Boinc and GPU-Z now work again, Win 7 64bit Premium E8500 4Gig PC6400 9800GTX+ HD5770 Claggy |
989)
Message boards :
BOINC Manager :
10.6.43, how to recover
(Message 32667)
Posted 7 May 2010 by Claggy Post: Click update. Claggy |
990)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32297)
Posted 19 Apr 2010 by Claggy Post: msattler, msattler, It would be just quicker asking him, than going through his 18,000 posts, ;) I think he had to use a splitter cable on the way to the KVM switch, with a dummy plug on one end, Claggy |
991)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32294)
Posted 19 Apr 2010 by Claggy Post: msattler at Seti had this same problem, ask him how he fixed it. Claggy |
992)
Message boards :
Questions and problems :
Seti @ Home - No Graphics using Boinc 6.10.43
(Message 32281)
Posted 19 Apr 2010 by Claggy Post: I tried the Boinc / Seti Beta project's Seti_enhanced screensaver on my Atom N450 / GMA3150 Netbook, and it worked fine, I've since updated the drivers to the latest version, and have the Astropulse Screensaver working at this moment, Make sure the Screensaver is set to BOINC, and not Blank, not that i'll make a difference with the Show Graphics button. Claggy Edit: OpenGL Entensions Viewer 3.20 lists my GMA3150 as being fully 1.4 compliant, 66% compliant for 1.5 (GL_ARB_occusion_query not supported), and only 10% supported for 2.0 (only support is for GL_EXT_stencil_two_side) |
993)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32275)
Posted 19 Apr 2010 by Claggy Post: Same driver for each card. Then you need to attach Monitors or dummy plugs to them to get them recognised, then extending the Desktop across them may or may negate the need for Monitors or dummy plugs, Claggy |
994)
Message boards :
Questions and problems :
your app_info xml.file doesn't have a version of Set@home enhanced
(Message 32260)
Posted 18 Apr 2010 by Claggy Post: You're only got Astropulse and Astropulse_v5 in your app_info, they're both obsolete now, and have been replaced with Astropulse_v505, do as Ageless said, delete app_info and reset project, run with stock apps until Lunatics is up again. Claggy |
995)
Message boards :
Questions and problems :
your app_info xml.file doesn't have a version of Set@home enhanced
(Message 32256)
Posted 18 Apr 2010 by Claggy Post: post the app_info here, use Notepad only. Claggy |
996)
Message boards :
Questions and problems :
your app_info xml.file doesn't have a version of Set@home enhanced
(Message 32254)
Posted 18 Apr 2010 by Claggy Post: Since you're posted your Boinc start up messages, but not given any background info, or asked any questions, it's hard to tell what you want to know, You're got an app_info, but it doesn't have a section for SETI@home Enhanced in it, since you're got a ATI Radeon HD 3800, you might be wanting to do Hybrid Astropulse_v505 work, or you might be wanting to do the Astropulse_v505 work on the CPU, hard to tell. Claggy |
997)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32253)
Posted 18 Apr 2010 by Claggy Post: Same cards. GPU-Z can see each different card. But does GPU-Z say the same driver version on each card? Claggy |
998)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32248)
Posted 18 Apr 2010 by Claggy Post: What does GPU-Z say about driver versions across the different cards? same? Claggy |
999)
Message boards :
Questions and problems :
Only using one of two GPUs
(Message 32246)
Posted 18 Apr 2010 by Claggy Post: I have a similar problem: Try uninstalling and reinstalling the drivers, (you might have to uninstall several versions), it might be that windows has picked up an old pre-185.85 driver for your two new GPU's, then if that doesn't work, try a different version driver, You don't say what version drivers, or Boinc you're running, up to date can mean the latest Release version of Boinc (6.10.43), or it could be the the latest Development version (6.10.45), and when you say you tried the latest Beta, are talking about drivers? or Boinc? Claggy |
1000)
Message boards :
Questions and problems :
Can't get available GPU ram: 999
(Message 32188)
Posted 14 Apr 2010 by Claggy Post: What OS?, Boinc version? and what driver version? Claggy |
1001)
Message boards :
Questions and problems :
Multi-GPU Question
(Message 32183)
Posted 13 Apr 2010 by Claggy Post: Boinc 6.10.19 or later requied, Claggy |
1002)
Message boards :
Questions and problems :
BOINC mgr. GUI
(Message 32154)
Posted 13 Apr 2010 by Claggy Post: I was unable to get Boincmgr76.exe to start, comes up with: This application was unable to start correctly (0x000007b). OS: Win 7 Premium 64bit Boinc 6.10.45 x86_64 Claggy |
1003)
Message boards :
BOINC Manager :
Migrating to new version of BOINC + New O/S
(Message 32141)
Posted 12 Apr 2010 by Claggy Post: You probably still need platform entries of 'windows_intelx86' in your app_info, Claggy |
1004)
Message boards :
Questions and problems :
New client, new dirver, new NVIDIA GPU problem
(Message 32125)
Posted 11 Apr 2010 by Claggy Post: Probably because Boinc's querying the Cuda api, and that's the reply it gets, Claggy |
1005)
Message boards :
BOINC Manager :
Migrating to new version of BOINC + New O/S
(Message 32116)
Posted 11 Apr 2010 by Claggy Post: Use 32bit Boinc instead, run down the cache, then install 64bit Boinc. Claggy |
1006)
Message boards :
BOINC Manager :
Migrating to new version of BOINC + New O/S
(Message 32112)
Posted 11 Apr 2010 by Claggy Post: 4/11/2010 8:05:37 PM Platform changed from windows_intelx86 to windows_x86_64 That's your problem, you changed platforms, and your app_info eithier doesn't have platform entries or the wrong ones, Restore your Boinc Data directory again, but don't start Boinc, head over to Lunatics, and get the latest 64bit Beta Installer, you might have post a couple of times to get it, run the 64bit installer, it'll put extra platform tags in, both windows_intelx86 and windows_x86_64, as well as 6.09 and 6.08 entries for maximum compatibility, now start Boinc, Claggy |
1007)
Message boards :
BOINC Manager :
Migrating to new version of BOINC + New O/S
(Message 32111)
Posted 11 Apr 2010 by Claggy Post: Wait, I've got details how to restore everything, just got to write it out, Claggy |
1008)
Message boards :
Questions and problems :
New client, new dirver, new NVIDIA GPU problem
(Message 32098)
Posted 11 Apr 2010 by Claggy Post: Downgraded my E8500 Vista 64bit machine to 196.34, now shows 512Mb again. Claggy |
1009)
Message boards :
Questions and problems :
New client, new dirver, new NVIDIA GPU problem
(Message 32096)
Posted 11 Apr 2010 by Claggy Post: I forgot to post my preferences... My Laptop's 8400M GS is also showing less Memory with the 197.16 drivers, down to 113Mb now, from 128Mb with the 195.81 drivers, and my Desktop's 9800GTX+ is down to 495Mb from 512Mb with the 197.13 & 197.25 drivers too, I've posted a question on Nvidia forum, no reply yet, another posting there will help, Cuda-Z and Boinc report less Memory with 197.xx drivers Claggy Edit: my hosts at Seti: Computers belonging to Claggy |
1010)
Message boards :
Questions and problems :
Seti @ Home - No Graphics using Boinc 6.10.43
(Message 32080)
Posted 9 Apr 2010 by Claggy Post: I tried running Furmark 1.8.0 on my Notebook, but it came up with an error saying it requires an OpenGL 2.0 compliant Graphics controller, but i haven't updated it's drivers yet. Claggy |
1011)
Message boards :
Questions and problems :
BOINC 6.10.43 - Runs two task on single gpu
(Message 32079)
Posted 9 Apr 2010 by Claggy Post: Hiamps has been complaining about this issue on and off for months, but never bothered posting any logs, even when reminded about it. Claggy |
1012)
Message boards :
Questions and problems :
Seti @ Home - No Graphics using Boinc 6.10.43
(Message 32072)
Posted 9 Apr 2010 by Claggy Post: Does your computer have a Nvidia GPU installed and, if yes, are you using it to work for SETI? If yes, that would explain your "problem". If the application name of which you are trying to show the graphics has a "6.09" in the name (Application column in Tasks tab), then there is just no graphics application associated. GMA3150 is the Graphics Chip, so it shouldn't have a Cuda GPU as well. I've just got myself a new Netbook with an Atom N450 dual core, and a GMA3150, and i attached it to Seti yesterday, I'm using Lunatic's optimised apps on it, so no screen saver, When i manage to get an internet connection, I'll attach it to Seti Beta and try the screensaver there instead. Computer 5365373 Claggy |
1013)
Message boards :
Questions and problems :
CPU usage
(Message 31819)
Posted 28 Mar 2010 by Claggy Post: O.K, that at least shows cc_config.xml is in the correct location & working, you can now turn off those Extra flags, and <use_all_gpus> by changing the 1 to a 0, Note the task log should have been set to on, as it's on by default, Now check in the Activity Menu that it's selected to Run based on preferences and not to Always, Edit: you do get two lines in Boinc's messages saying the following?: 28/03/2010 18:09:40 Config: don't compute while RelicCOH.exe is running 28/03/2010 18:09:40 Config: don't compute while DAOrigins.exe is running Claggy |
1014)
Message boards :
Questions and problems :
CPU usage
(Message 31817)
Posted 28 Mar 2010 by Claggy Post: either way, does anyone have any ideas on why it still isn't woring as intended? O.K, make the following cc_config.xml with Notepad, save it as cc_config.xml with ANSI encoding, afterwards right click on it and select Edit, it should open in Notepad, make sure it does say cc_config.xml in the top left corner, Copy the file into the same directory as in your Boinc start up messages, then restart Boinc, and then post your startup messages, the second line should say 'Config: use all coprocessors', while the third line should have a couple of extra log flags. Claggy <cc_config> <log_flags> <sched_op_debug>1</sched_op_debug> <cpu_sched>1</cpu_sched> <work_fetch_debug>0</work_fetch_debug> <dcf_debug>0</dcf_debug> <debt_debug>0</debt_debug> <coproc_debug>0</coproc_debug> <checkpoint_debug>0</checkpoint_debug> <debt_debug>0</debt_debug> <rr_simulation>0</rr_simulation> <guirpc_debug>0</guirpc_debug> <state_debug>0</state_debug> <task_debug>0</task_debug> <http_debug>0</http_debug> <http_xfer_debug>0</http_xfer_debug> <task>0</task> </log_flags> <options> <use_all_gpus>1</use_all_gpus> <save_stats_days>760</save_stats_days> <exclusive_app>RelicCOH.exe</exclusive_app> <exclusive_app>DAOrigins.exe</exclusive_app> </options> </cc_config> |
1015)
Message boards :
Questions and problems :
BOINC Not Always Suspending for User Activity
(Message 31811)
Posted 28 Mar 2010 by Claggy Post: What is the CPU? Single, Dual or Quad Core?, what are your cache settings? how many tasks do you have?, Boinc Manager has to display all the tasks once a second, does hitting 'show active tasks' help? Claggy |
1016)
Message boards :
Questions and problems :
BOINC Not Always Suspending for User Activity
(Message 31809)
Posted 28 Mar 2010 by Claggy Post: Seti tasks are divided into different Angle Ranges, from Very Low Angle Range, (VLAR)(less than 0.2 ish) through Normal Angle Range (around 0.44) up to Very High Angle Range (VHAR)(aka Shorties), on a Cuda card the VLAR Wu's are done very inefficiently, take a long time, and make the PC very sluggish, Normal AR and VHAR's are no problem, what you can do is run the reschedule1.9 program, it'll move the VLAR Wu's so they are done on the the CPU instead, available here: Re: CPU <-> GPU rebranding Claggy |
1017)
Message boards :
Questions and problems :
CPU usage
(Message 31804)
Posted 27 Mar 2010 by Claggy Post: Check the file extension of the cc_config.xml, make sure it's not cc_config.xml.txt, as Windows by default hides the file extension. Claggy |
1018)
Message boards :
Questions and problems :
CPU usage
(Message 31796)
Posted 27 Mar 2010 by Claggy Post: I have done that, and I just rebooted my machine, and still nothing. What do you mean by 'still nothing?', do you get any messages from Boinc at all?, the cc_config.xml needs to be in the Boinc Data folder for Boinc to use it. Claggy |
1019)
Message boards :
Questions and problems :
How to pass arg for boinc.exe via boincmgr launch properly?
(Message 31785)
Posted 26 Mar 2010 by Claggy Post: Thanks. Boinc 6.10.43 doesn't clear GPU memory during benchmarks, app just pauses while benchmark done. Claggy |
1020)
Message boards :
Questions and problems :
why no graphics?
(Message 31735)
Posted 23 Mar 2010 by Claggy Post: And what kind of videocard, brand and model? Under the Tasks Tab. What Project? Claggy |
1021)
Message boards :
BOINC client :
Suggestions for currently active Linux/GPU projects
(Message 31696)
Posted 21 Mar 2010 by Claggy Post: Hi folks, First of all, it's not a good idea to post your email address, do you really want to get spammed? (you can edit your post and remove it) Collatz Conjecture has Cuda apps for Linux, you'll have to download and install it manualy through, Seti, while it doesn't have a stock Cuda app, there are third part 64bit linux Cuda apps available: Crunch3r's Linux 64bit page SETI MB CUDA for Linux Claggy |
1022)
Message boards :
Questions and problems :
Can BOINC use Nvidia FX5200 video card GPU? Or just stick with CPU?
(Message 31577)
Posted 14 Mar 2010 by Claggy Post: you need a Nvidia 8*** card or later Point taken, it should have said Geforce 8xxx and later, or Quadro FX, or Tesla. Claggy |
1023)
Message boards :
Questions and problems :
Can BOINC use Nvidia FX5200 video card GPU? Or just stick with CPU?
(Message 31574)
Posted 14 Mar 2010 by Claggy Post: Running BOIC on an old computer (Intel P4, 1.8 gigHz CPU, 1 gig of DDR RAM (max motherboard allows) Windows XP Home Edition). BOIC is 6.10.18, Widgets 2.8.10 Nope, too old, you need a Nvidia 8*** card or later that is Cuda capable see: Cuda or CUDA GPUs Claggy |
1024)
Message boards :
Questions and problems :
BOINC 6.10.18 not using CPUs
(Message 31564)
Posted 13 Mar 2010 by Claggy Post: Do you have a cc_config.xml with an <ncpus> entry?, if so, removed it and restart Boinc, and do benchmarks manually, it's meaning has changed since Boinc 6.6.x Claggy |
1025)
Message boards :
BOINC client :
boss button for cuda tasks
(Message 31328)
Posted 3 Mar 2010 by Claggy Post: Isn't there a "Pause GPU tasks" if you right click the system-tray icon of BOINC manager (windows)? Or perhaps in the Activity menu? 6.10.36 has a 'Snooze GPU' option in the System tray icon (snoozes for an hour), and 'use GPU: never' option in the Activity menu, you're just got to remember to set this one back to 'use GPU: based on preferences' afterwards. Claggy |
1026)
Message boards :
BOINC client :
BOINC 6.1 to 6.10 Versions Change Log
(Message 31279)
Posted 1 Mar 2010 by Claggy Post: Jord, I'm sorry you're had to make this decision, this thread is very usefull, and will be missed. Claggy |
1027)
Message boards :
Questions and problems :
GPU usage on ATi HD4850
(Message 31147)
Posted 21 Feb 2010 by Claggy Post: It's not a problem, Boinc is just the Software that different Projects run on, each project has their own Server(s), Website, Forum, etc, and i'm just a user that helps others on a couple of different forums. Claggy |
1028)
Message boards :
Questions and problems :
GPU usage on ATi HD4850
(Message 31145)
Posted 21 Feb 2010 by Claggy Post: This is the Boinc Forum, not the Setiathome Forum, There is no Setiathome Enhanced app for ATI GPU's (yet) so you won't be able to do any of that, But there is an Optimised Hybrid Astropulse app, but it only part uses the GPU, 75% of the work being done by the CPU, with short pulses being done by the GPU. have a look in Number Crunching at Seti for further info. Claggy |
1029)
Message boards :
Questions and problems :
Ubuntu 9.10 / BOINC 6.10.17 / ATI HD3870 Problem
(Message 31143)
Posted 21 Feb 2010 by Claggy Post: Milkyway has no Linux compatible ATI application. elect has already got the experimental Linux Collatz 2.01 app installed, from the following: 21-Feb-2010 00:57:35 [Collatz Conjecture] Found app_info.xml; using anonymous platform and: 21-Feb-2010 00:57:35 [Collatz Conjecture] Restarting task collatz_1266517580_140813_1 using collatz version 201 He's also posted in this thread under a Different Nick at Collatz: ATI 9.12 / Linux64 / BOINC problem... But has posted slightly different information, here his log shows two apps being started, but at Collatz he's not posted any startup messages, but he's posted the following showing only GPU 0 is being used: The cc_config.xml needs to be in the Boinc Data folder, not the Boinc folder, Claggy |
1030)
Message boards :
Questions and problems :
SETI @ Home?
(Message 30954)
Posted 10 Feb 2010 by Claggy Post: I installed Seti @ Home but I keep getting these messages from the server saying no work sent or that my pc has no NVIDIA GPU. I have a Toshiba with a ATI Radeon 3100 Graphics. Do I need to install any other drivers? What are compatible. Please help! Don't worry about it, the server is saying that there is work available for Nvidia GPU's, but since you don't have a Nvidia GPU, you can't get work for a GPU you don't have, CPU work requests should still give you work for the CPU. Claggy |
1031)
Message boards :
Questions and problems :
BOINC not Cylcing through GPU tasks properly
(Message 30832)
Posted 5 Feb 2010 by Claggy Post: Alrighty. Slicker has been changing the flops values of tasks so first time users get a WU with a proper estimated duration, see: A rather long workunit? My laptop with it's 8400M GS got 79 Cuda wu's each with 1 hour duration estimated, but with each wu taking over 10 hours, i had over 800hrs of work cached, but less than 330 hours to do it, i had already suspended most of them, so i had to set NNT, and went through my tasks aborting a lot of them so i only had 2 or 3 tasks due on the same day, Now because there has been a mixture of tasks with different flops values, i only have 4 tasks with 45hour duration estimated, DCF will fall in time and my cache will fill up again. I suggest you do likewise, abort any surplus that haven't been started, and suspend some if necessary, Note: Resetting the project (at Collatz) only re-downloads the apps and the very same wu's you had before!! Claggy |
1032)
Message boards :
Questions and problems :
Hide BOINC in system tray
(Message 30713)
Posted 27 Jan 2010 by Claggy Post: Boinc is divided into two parts, the Boinc client (hidden) and the Boinc Manager (the GUI), the way to do it, is to allow them to shut the manager down, but leave the client and science apps running, So go to: Advanced>Options, tick 'Enable Manager exit dialog?', then O.K, Now go: File>Exit, Untick 'Stop running science applications when exiting the Manager', and Tick 'Remember this decision and do not show this dialog', then Click O.K, Now the GUI has been shut down, but the client and apps are still running in the background. When you Do want to shut down the client and the science apps, go: Advanced>Options, tick 'Enable Manager exit dialog?', then O.K, then: File>Exit, Tick 'Stop running science applications when exiting the Manager', then O.K. Claggy Edit: or you can install it as a Service. |
1033)
Message boards :
BOINC client :
BOINC 6.10 released to the public
(Message 30678)
Posted 25 Jan 2010 by Claggy Post: The reply is coming from the Server, not the client, you're asking for GPU work, you don't get any Astropulse work (for your ATI GPU) because there isn't any, Eric needs to split another tape before there is any, (bar a few resends) and you're asking for Setiathome_enhanced work for your GPU, but you won't get any, because the only GPU app available is for a Nvidia GPU and you don't have a Nvidia GPU. Claggy |
1034)
Message boards :
BOINC Manager :
Bionc does not fetch any work from SETI
(Message 30648)
Posted 24 Jan 2010 by Claggy Post: Does Seti ask for work if you suspend Milkyway? Claggy |
1035)
Message boards :
BOINC client :
Boinc Manager not shutting down GPU Tasks
(Message 30623)
Posted 23 Jan 2010 by Claggy Post: Crogge and Merek, what have you got 'Activity' set to? Claggy |
1036)
Message boards :
Questions and problems :
GPU Scheduling problem with 6.10.29, Einstein work units
(Message 30607)
Posted 20 Jan 2010 by Claggy Post: _ Yes Claggy |
1037)
Message boards :
Questions and problems :
GPU Scheduling problem with 6.10.29, Einstein work units
(Message 30605)
Posted 20 Jan 2010 by Claggy Post: If you read Einstein's forum, the MAC Cuda app has caused a spate of insufficient GPU RAM messages, probably because OS X is using it, Bernd Machenschalk was going to reduce the limit from 450 to 400 or 420, his recommendation was to abort the affected tasks and update the project to get new GPU tasks, You'll need the [cpu_sched_debug] flag turned on to see the insufficient GPU RAM messages. Claggy |
1038)
Message boards :
Questions and problems :
GPU usage should be made optional
(Message 30592)
Posted 19 Jan 2010 by Claggy Post: Or you could try out Boinc 6.10.29, the latest development version which has the Snooze GPU function, which snoozes the GPU for an hour, and you can turn GPU use off in the activity menu as well, please don't try it if you're attached to the AQUA or CPDN Beta projects. Claggy |
1039)
Message boards :
Questions and problems :
Weird Task Tab problem
(Message 30576)
Posted 18 Jan 2010 by Claggy Post: Hit the button that says 'Show All Tasks' and All the tasks will be shown, now the button changes to 'Show Active Tasks', if you hit it now, only active tasks will be shown, The button is there to help relieve the Pressure on the Client and Manager when Boinc has a large amount of tasks, as the client has to send the task details to the Manager once a second, if there's less tasks in the list to display, Boinc performs better. Claggy |
1040)
Message boards :
Questions and problems :
NVIDIA GPU 1 (not used)
(Message 30569)
Posted 17 Jan 2010 by Claggy Post: For all the options and flags see the Boinc wiki: Client configuration or Boinc FAQ: How do I configure my client using the cc_config.xml file? Claggy |
1041)
Message boards :
Questions and problems :
NVIDIA GPU 1 (not used)
(Message 30567)
Posted 17 Jan 2010 by Claggy Post: Have you read the "6.10: No GPUs Found" thread? What's that got to do with this issue? Claggy |
1042)
Message boards :
Questions and problems :
NVIDIA GPU 1 (not used)
(Message 30566)
Posted 17 Jan 2010 by Claggy Post: Boinc 6.10.x only uses the most Capable GPU by default, to enable the other GPU, you'll need to make a cc_config.xml file, copy the following and paste it into Notepad, then save it as cc_config.xml making sure it doesn't have a .txt extension, then drop the file in your Boinc Data folder, and restart Boinc, you should get a line in Boinc's messages saying: Config: use all coprocessors <cc_config> <options> <use_all_gpus>1</use_all_gpus> </options> </cc_config> Claggy |
1043)
Message boards :
BOINC client :
no gpu use with boinx 6.10.21 mac
(Message 30562)
Posted 17 Jan 2010 by Claggy Post: why when bencmarking my mac pro, no trace of GPU usage is listed ??? it's a 8800GT nvidia running on mac os x 10.5.8 Until just over a week ago, No Mac versions of Boinc could detect the GPU because of the lack of Nvidia 64bit Cuda drivers, and if you installed the 32bit Cuda drivers, Boinc still couldn't see the GPU, Since then, Charlie has done an Experimental 32bit Boinc with 64bit support that correctly detects the GPU, 6.10.29 is the latest, available from the downloads area. See this thread in the Q&A Section: Mac user GPU Claggy |
1044)
Message boards :
News :
BOINC supports GPU computing on Mac OS X
(Message 30523)
Posted 13 Jan 2010 by Claggy Post: Mac owners with NVIDIA GPUs can also run a GPU-enabled application from Collatz. Claggy |
1045)
Message boards :
BOINC Manager :
No CPU core used while there are available WUs!!
(Message 30521)
Posted 13 Jan 2010 by Claggy Post: Edit: after another look at your host, your GPU has been doing VLAR (very low angle range) tasks which are very slow using the Cuda app, Yes, Basically because of the above, you ran out of CPU work, and Boinc couldn't ask for more work, eithier because Seti was set to NNT, Network Activity was Suspended, or Boinc just didn't have a Internet connection. Claggy |
1046)
Message boards :
BOINC Manager :
No CPU core used while there are available WUs!!
(Message 30514)
Posted 13 Jan 2010 by Claggy Post: Look and see whether you've perhaps unticked "Do work ... while computer is in use" (processor usage tab). After looking at your hosts task list, you're completed all your CPU tasks, leaving only GPU tasks left, Is Boinc asking for CPU work from Seti?, since your Boinc log didn't include any work requests at all. Claggy Edit: after another look at your host, your GPU has been doing VLAR (very low angle range) tasks which are very slow using the Cuda app, which will have driven your host's DCF (Duration Correction Facture) up, Boinc will have thought that all Seti tasks were going to take longer, and so wouldn't have received as much CPU work, once you're finished any VLAR tasks on the GPU, and the GPU starts doing non-VLAR tasks, then DCF will go down, run times wiil look more reasonable, and you'll get more CPU work. hostid=5257895 |
1047)
Message boards :
BOINC Manager :
No CPU core used while there are available WUs!!
(Message 30510)
Posted 12 Jan 2010 by Claggy Post: 12/01/2010 23:00:56 SETI@home Computer location: home And check your Setiathome Project preferences, that you haven't got the default preferences set to not get CPU work, as you haven't set up Seti Project Preferences for the Home Venue. Claggy Edit: with Boinc 6.10.18 and earlier, if you turn off CPU or GPU work fetch in the Default project Preferences, it also Blocks work fetch for computers in the Home/School/Work venues as well, (fixed in Boinc 6.10.19) |
1048)
Message boards :
Questions and problems :
Mac user GPU
(Message 30449)
Posted 7 Jan 2010 by Claggy Post: Well, somewhat of a hollow victory; as there remain no GPU projects for the mac. Collatz has a MAC OS X 32-bit CUDA App Claggy |
1049)
Message boards :
Questions and problems :
Mac user GPU
(Message 30408)
Posted 1 Jan 2010 by Claggy Post: Slicker at Collatz has made a MAC OS X 32-bit CUDA App, it requires a 32-bit MAC running OS X 10.5.2 or higher that has a CUDA card, there's been no takers so far, i don't think it'll help you jeff, unless you can find a way of installing the 32bit version of Boinc. Claggy |
1050)
Message boards :
Questions and problems :
Importance of L3 cache
(Message 30401)
Posted 1 Jan 2010 by Claggy Post: I intend to buy a replacement for my X2 4050e but don't want to spend too much money. Depends on the Application, Setiathome's Astropulse app is particularly slow on AMD chips compared to Intel C2D chips, probably all to do with the size of the L2 Cache difference between them, i don't know about malaria.net, try comparing run times in the top hosts. I'd point you to a list of computers on Seti Beta, but the Main and Beta projects are down at the moment. Claggy |
1051)
Message boards :
Questions and problems :
Mac user GPU
(Message 30343)
Posted 26 Dec 2009 by Claggy Post: Ah, well, that's a pity. Jeff, can you post your Boinc startup logs please, Claggy |
1052)
Message boards :
Questions and problems :
Mac user GPU
(Message 30331)
Posted 25 Dec 2009 by Claggy Post: I'm running OS X 10.6.2, on MacBook Pro with a nvidia GeForce 8600 GT graphics card with 256 MB. I installed the cuda 2.3.1a drivers for mas ox. I'm running BOINC 6.10.21. Normally (at least for Windows users), all drivers are got from NVIDIA Driver Downloads, rather than the link you were pointed to, which is more for developers. Projects with CUDA If you check the above project's application pages, you'll find none of them have Cuda apps for the Mac yet, Seti is still waiting for a Astropulse_v505 CPU app for the Mac, and Collatz only released a CPU app a couple of days ago. Have a read of this thread at Seti: CUDA on OS X (10.6) Claggy |
1053)
Message boards :
Questions and problems :
Mac user GPU
(Message 30324)
Posted 24 Dec 2009 by Claggy Post: I'm running OS X 10.6.2, on MacBook Pro with a nvidia GeForce 8600 GT graphics card with 256 MB. I installed the cuda 2.3.1a drivers for mas ox. I'm running BOINC 6.10.21. There aren't any projects with Cuda apps for OS X, because there aren't any drivers (for end users) for OS X, bar the ones for Quadro FX 4800 and GeForce GTX 285, which at version 18.5216 is probably below the version that Boinc 6.10.x requires, Hopefully someone with more up to date info will post. Claggy |
1054)
Message boards :
Questions and problems :
Hello! Question on Prioritizing Projects and CPU utilization
(Message 30298)
Posted 22 Dec 2009 by Claggy Post: You just have to give Seti a bigger resource share, or other project a smaller one, you'll find the resource share in each project's preferences. Claggy |
1055)
Message boards :
BOINC client :
Boinc Manager not shutting down GPU Tasks
(Message 30283)
Posted 20 Dec 2009 by Claggy Post: How have you set 'Suspend GPU work while computer is in use? Enforced by version 6.7+', is it from the Computing Preferences on Seti's website?, have you got the Computer set at the same location as the preferences you're trying to use? (ie Default/Home/School/Work) or is from Boinc's own Local preferences at Advanced/Preferences/processor usage, then untick 'use GPU when computer is in use', then O.K, Note: this over-rides the web preferences. I've just tried it on my Laptop on Boinc 6.10.25, using Seti's Preferences and the Boinc's Local preferences, and my GPU's Collatz task stops after about 5 seconds, it is available here: http://boinc.berkeley.edu/dl/?C=M;O=D Boinc 6.10.25 also has a new snooze GPU function, which will snooze the GPU for an hour, while letting the CPU carry on computing. Claggy |
1056)
Message boards :
BOINC client :
Boinc Manager not shutting down GPU Tasks
(Message 30281)
Posted 20 Dec 2009 by Claggy Post: Neither of you said what project this is on, are you sure the app isn't computing until the next checkpoint, then stopping?, Claggy |
1057)
Message boards :
Questions and problems :
BOINC Problem
(Message 30274)
Posted 20 Dec 2009 by Claggy Post: Dial up modem????? Made link active, haven't people learnt how to post Links yet? Claggy |
1058)
Message boards :
BOINC Manager :
exclusive_gpu_app *.exe not working in 6.10.24
(Message 29517)
Posted 16 Dec 2009 by Claggy Post: Umm, I can´t find a beta 6.10.25 anywhere. Or is this beta (alpha?) only for linux? boinc_6.10.25_windows_intelx86.exe boinc_6.10.25_windows_x86_64.exe Claggy |
1059)
Message boards :
BOINC Manager :
exclusive_gpu_app *.exe not working in 6.10.24
(Message 29514)
Posted 16 Dec 2009 by Claggy Post: ..., and I can´t use the <exclusive_app> command, because my webbrowser is always on) I´ll always have to stop computing completely and when I forget to set it back, it will not compute at all, until I realize it some day... Or if he feels brave, ;), he can try 6.10.25, which has the snooze GPU function, i've tried it, it does work, not timed it through. Claggy |
1060)
Message boards :
Questions and problems :
Windows 7 x64 no GPU detect
(Message 29478)
Posted 15 Dec 2009 by Claggy Post: Thanks, on my PSP, can't copy and paste anything on it. Claggy |
1061)
Message boards :
Questions and problems :
Windows 7 x64 no GPU detect
(Message 29475)
Posted 15 Dec 2009 by Claggy Post: Have you read the "6.10: No GPUs Found" thread? Claggy |
1062)
Message boards :
Questions and problems :
No CUDA
(Message 29459)
Posted 15 Dec 2009 by Claggy Post: That will probably help, or use a dummy plug. Claggy |
1063)
Message boards :
Questions and problems :
New questions
(Message 29276)
Posted 5 Dec 2009 by Claggy Post: As there are 3 venues, you can have up to 3 computers separately adjusted. The are 4 venues, so you can have 4 computers separately adjusted, ie Default, Home, School and Work. mind you you'll need Boinc 6.10.19 or later for the use CPU / GPU (enforced by 6.10+ clients) to work properly. Claggy |
1064)
Message boards :
Questions and problems :
New questions
(Message 29271)
Posted 5 Dec 2009 by Claggy Post: 0.5 days isn't a big cache, as i said in the other thread, you can have a cache of up to 20 days, normally a couple of days is enough. On each project you have a choice of 4 venues, Default, Home, School & Work, they are used to give different computers different project preferences, If you look at your computer's details at each project, you'll find the options right at the bottom of the page, the "-" is the default option. Claggy |
1065)
Message boards :
Questions and problems :
Transitory Nature of DCF Changes
(Message 29258)
Posted 5 Dec 2009 by Claggy Post: Pardon my ignorance, but I can't find cc_config.xml, and I don't know what you mean by 'switch on /'. He ment 'Switch on' / 'Insert' the line in your cc_config.xml To switch on a logging entry, you change the '0' in the line to a '1', and if you haven't got the the line in a cc_config.xml you'd need to insert the line, You won't have a cc_config.xml by default, you have to make it, just copy and paste the following using Notepad (It's Important to use Notepad), and save the file as cc_config.xml making sure it doesn't have a .txt extension, then drop the file in your Boinc Data directory, (you can find the location from your Boinc start up messages) you might have to unhide it, as it's Normally a hidden folder. <cc_config> <log_flags> <sched_op_debug>0</sched_op_debug> <dcf_debug>1</dcf_debug> </log_flags> </cc_config> Boinc Wiki's client configuration page BOINC FAQ Service's client configuration page Claggy |
1066)
Message boards :
Questions and problems :
No work in WCG
(Message 29254)
Posted 5 Dec 2009 by Claggy Post: How about a slightly bigger cache?, you are only going to ask for work at almost the instant you run out, and the projects don't promise 24/7/365 server availability, let alone have work available at that instant you require it. You can go as high as 10+10, but i wouldn't recommend it, try 0+1, Claggy |
1067)
Message boards :
Questions and problems :
Anyone have problems posting?
(Message 29221)
Posted 4 Dec 2009 by Claggy Post: Does anyone have problems posting to the forums? No problems here. Claggy |
1068)
Message boards :
BOINC client :
6.10 not using all threads
(Message 28749)
Posted 14 Nov 2009 by Claggy Post: This should have been fixed in Changeset 19522, expect this fix to appear in one of the next releases. Claggy |
1069)
Message boards :
BOINC Manager :
Only one processor starts
(Message 28632)
Posted 10 Nov 2009 by Claggy Post: It'll be the AQUA. BOINC has that problem currently with multi-threaded applications (see the AQUA message board). Downgrade to v6.10.13, or put up with it until the BOINC developers have pulled their finger out and fixed the (reported) problem. The developer's found a typo on an earlier changeset to do with multi-thread apps, Changeset 19522 might have fixed it. Claggy |
1070)
Message boards :
Questions and problems :
BOINC 6.10.17 does not Checkpoints Task to disk every 60 secs
(Message 28571)
Posted 8 Nov 2009 by Claggy Post: Although the "Tasks checkpoint to disk at most every X seconds" is set to 60, the client_state.xml file is updated maybe every randomly 30+ minutes. But do the tasks checkpoint every 60 secs?, do a cc_config as following and drop it in your Boinc Data folder, then in Boinc, click advanced/read config file: <cc_config> <log_flags> <checkpoint_debug>1</checkpoint_debug> </log_flags> </cc_config> The client_state.xml in likely to be only updated when the tasks finish, get reported, or fresh wu's received, etc, and not when they checkpoint. Claggy |
1071)
Message boards :
Questions and problems :
BOIC ERROR 2762
(Message 28570)
Posted 8 Nov 2009 by Claggy Post: Try downloading it to different location, then double click it once it's downloaded fully. Claggy |
1072)
Message boards :
Questions and problems :
GeForce 8300 wrong size memory detected by Boinc in Linux
(Message 28533)
Posted 6 Nov 2009 by Claggy Post: All right, that explains that. It could've otherwise been a (user) build error. ;-) Damn, my next course of action was going to try going into the Bios to see if i could allocate system RAM to my 128Mb 8300M GS on my Samsung R700 Laptop, Guess i'm stuck with Collatz too, ;-( Claggy |
1073)
Message boards :
Projects :
ATI support?
(Message 28494)
Posted 5 Nov 2009 by Claggy Post: What Boinc version are you running?, you'll need 6.10.x minimum. Seti doesn't have a ATI app, you'll have to join a project that does. Claggy |
1074)
Message boards :
Questions and problems :
GPU not detected
(Message 28466)
Posted 3 Nov 2009 by Claggy Post: So far I'm not having a lot of luck in getting BOINC to recognise my GPU. I've just installed the latest version of BOINC (6.10.17), as well as the latest ATI driver pack (9.10 - although the actual display driver reports as 8.661.0.0) and BOINC still says that no CUDA devices were found. Only Nvidia GPU's are Cuda devices, from GForce 8 onwards: CUDA-Enabled GPU Products - NVIDIA Can you post Boinc's start up messages please. Claggy |
1075)
Message boards :
Projects :
What project can make use of Pentium MMX class PC?
(Message 28383)
Posted 29 Oct 2009 by Claggy Post: Can you make an app_info to get around Server side restrictions?, i did it on Seti Beta to get around GPU memory restriction of 256Mb, only enabled me to run in CPU fallback mode through, also did it on Collatz Conjecture, successfully. Claggy |
1076)
Message boards :
Questions and problems :
Hello - issue with 6.6.41
(Message 28356)
Posted 27 Oct 2009 by Claggy Post: If you go to you account on Milkyway@home, on your Computing preferences page, you need to increase your Disk and memory usage, to something like: Use at most: 10 GB disk space then click update on Boinc. Claggy |
1077)
Message boards :
Questions and problems :
Cuda on Geforce 9400
(Message 27795)
Posted 6 Oct 2009 by Claggy Post: Boinc Manager v 6.6.36 How installed? Claggy |
1078)
Message boards :
BOINC Manager :
Can't get Attach to Project to work
(Message 27653)
Posted 29 Sep 2009 by Claggy Post: O.K, all_projects_list.xml is Corrupted with data from BTFON, date is 26/09/09 02:37, size 9.78k, copy from desktop 27/09/09 10.:14, size 24.7k, (I connect to the internet via a BTFON wireless link when not back at my house), and i must have not been logged in when i tried it the first time, It's probably all the data for the BTFON logon page, as there's no Boinc related data left. and yes it does work now. Claggy |
1079)
Message boards :
BOINC Manager :
Can't get Attach to Project to work
(Message 27644)
Posted 28 Sep 2009 by Claggy Post: Decided to attach to Collatz Conjecture yesterday, managed to get my E8500 C2D Desktop PC with Vista 64bit attached O.K with Boinc 6.10.9_64, But when i tried it on my T8100 C2D Laptop with Vista 32bit and Boinc 6.10.9_x86, i could only get as far as having attach to project selected, then on clicking Next, i just get a Blank window, without the list of Projects, and the Box hangs. I downgraded to 6.10.4, did a repair, it was the same, then uninstalled 6.10.4, and installed 6.6.37, i still didn't get the list of Projects, that part was Blank, but managed to copy and past project url into the Box at the bottom and attach O.K, I've since upgraded back to 6.10.9, still the same, and just now tried 6.10.10, which has the box open for 10 secs, no list of projects is shown, then Boinc Manager shuts down! Ideas? Claggy Edit: the only difference i can think of is the Desktop uses Windows firewall, while the laptop uses McAfee's firewall, I did try giving Boinc Manager inbound access as well as outbound, no change. The last time i did attach to a project, was probably Orbit in July 08, with Boinc 6.2.19 or an earlier version. |
1080)
Message boards :
Questions and problems :
boinc sometimes will only request GPU work.
(Message 27638)
Posted 28 Sep 2009 by Claggy Post: Talking of updated server code, the newest I've seen is AQUA: check out the new task listing. Collatz Conjecture has that new format as well: All tasks for computer 4178 Claggy |
1081)
Message boards :
Questions and problems :
BOINC causes PC to freeze ..help
(Message 26908)
Posted 30 Aug 2009 by Claggy Post: Where do I find this optomised for AMD version? I run SETI and PrimeGrid will it work for both? Here is Seti@home's number crunching forum: Message boards : Number crunching The optimised applications available here are for Seti only. Claggy |
1082)
Message boards :
Questions and problems :
No Work Sent - (won't finish in time)
(Message 26903)
Posted 30 Aug 2009 by Claggy Post: I tried detaching and attaching each project and both projects are downloading files to be processed. Anyone know why I had to do this drastic step? Or it could be the computer isn't on all the time, so work won't finish in time, since Tom blanked out the time the computer is on? Claggy |
1083)
Message boards :
BOINC client :
Simultaneous result uploading?
(Message 26811)
Posted 26 Aug 2009 by Claggy Post: There are options in cc_config.xml for changing the number of file transfers at once: How do I configure my client using the cc_config.xml file? Claggy |
1084)
Message boards :
BOINC client :
Unhandled Exception: Access Violation on Vista w/ CUDA
(Message 26773)
Posted 24 Aug 2009 by Claggy Post: This problem has Already been posted to the Boinc Alpha List and the developers are already looking into it. Claggy |
1085)
Message boards :
Questions and problems :
Projects for Tru64 clients?
(Message 26747)
Posted 23 Aug 2009 by Claggy Post: I PM'd dotsch, pointing him here, Claggy |
1086)
Message boards :
Questions and problems :
Can't install seti files hang in downloading
(Message 25963)
Posted 11 Jul 2009 by Claggy Post: 3 files all become hung up, and won't finish downloading. Have tried clicking 'Retry Now' in the Transfers Tab? Claggy |
1087)
Message boards :
Questions and problems :
Stop switching between WU
(Message 25818)
Posted 30 Jun 2009 by Claggy Post: There's an Echo in here. Claggy |
1088)
Message boards :
Projects :
Passing Report Deadline
(Message 25764)
Posted 28 Jun 2009 by Claggy Post: You should get any credit due, if you report the work before any reissues do, Claggy |
1089)
Message boards :
Questions and problems :
Stop switching between WU
(Message 25727)
Posted 27 Jun 2009 by Claggy Post: 6.6.12: Well i posted to the Boinc alpha list, and got this back: - client: when suspending a GPU job, always remove it from memory, even if it hasn't checkpointed. Otherwise we'll typically run another GPU job right away, and it will bomb out or revert to CPU mode because it can't allocate video RAM I think it's a improvement, at least we shouldn't see tasks dropping into CPU fallback mode so much, might need a bit more to stop Cuda tasks switching so much when they go EDF, Claggy |
1090)
Message boards :
Questions and problems :
Stop switching between WU
(Message 25699)
Posted 25 Jun 2009 by Claggy Post: 6.6.12: I can reproduce it by suspending Cuda tasks manually, but can't reproduce it by getting tasks Preempted automatically by Shorties, as i don't have a 10+ day cuda cache, with lots of shorties in it. Claggy |
1091)
Message boards :
Questions and problems :
Stop switching between WU
(Message 25697)
Posted 25 Jun 2009 by Claggy Post: 6.6.12: So why is it if you suspend a Seti Cuda task before it checkpoint's, that it's still left in memory?, causing the very next Seti Cuda task to fall into CPU fallback mode. Claggy |
1092)
Message boards :
Questions and problems :
Stop switching between WU
(Message 25637)
Posted 23 Jun 2009 by Claggy Post: b) After a couple of bodged starts, and a "nasty bug", I thought we had reached the point in v6.6.31 that grahics RAM (but not main system RAM) was invariably cleared by BOINC when pre-emtping CUDA tasks, whatever the state of the 'leave apps in memory' flag. I didn't find any problems with graphics RAM over-filling when testing v6.6.31 and later: if there are situations where apps remain in graphics memory (suggested by that 'going into fallback'), then they need to be enumerated, the circumstances identified, and the cause reported as a bug. I tried a couple of weeks ago to interest you in confirming what i had found when 6.6.33 was released, but i wasn't clear enough, Basically if a Seti cuda task get pre-emtped by a Cuda task that needs EDF (or by me just suspending the running task), the following happens: i.) If the task that has been pre-emtped has been running a little while, ie it has finished being fed by the CPU and has checkpointed, Boinc closes the app down. (it disappears from task manager), the next task starts normally, (about 45 to 50% CPU load dropping to 0 to 2%, and % doesn't count up until GPU has finished been fed) OR: ii.) If the task that has been pre-emtped, has only just started being fed to the GPU, and hasn't got as far as a checkpoint, Boinc Doesn't close the app down. (it's still shown in task manager), the next task starts in CPU fallback mode, (50% CPU load, and % starts counting Straight away) Claggy Edit: Boinc 6.6.36 is the same. |
1093)
Message boards :
Questions and problems :
6.6.20 Only sees 1 gpu
(Message 24718)
Posted 3 May 2009 by Claggy Post: A link to the host would help, along with your cc_config and Boinc's start up messages, <use_all_gpus> won't work, as it didn't get added until Boinc 6.6.25 Changes for 6.6.25 - client: add <use_all_gpus> config option. If set, use GPUs even if they're not equivalent to the most capable one. Claggy |
1094)
Message boards :
BOINC client :
nVidia GTX-295 x 2 = GPU Hell
(Message 24244)
Posted 12 Apr 2009 by Claggy Post: Hi Have you tried each GTX-295's on their own to see if you can get both GPU Cores working, then swap the GTX-295's over to see if both GPU cores work on that one. How many power conections on each Card?, have you checked them? It should work, some of the top hosts have 2 or 3 GTX-295's on XP, XP x64 and Vista x64, and using Boinc 6.6.20, But i couldn't find anyone else with Vista x86 and 2 GTX-295's. I wouldn't worry about the compute error's, we all get a few. Made your host link live, click reply to see how. Claggy |
1095)
Message boards :
BOINC client :
nVidia GTX-295 x 2 = GPU Hell
(Message 24236)
Posted 12 Apr 2009 by Claggy Post: A Link to the host would help please, Note, other people (Al) have posted Boinc showing 3 GPU's and the fourth getting cut off part way through, what does the website show? Does 4 cuda apps run together? Claggy |
1096)
Message boards :
BOINC client :
What am I missing for CUDA?
(Message 24141)
Posted 6 Apr 2009 by Claggy Post: I am only running 4 tasks with my quadcore processor. But boinc doesn't seem to be utilizing my graphics card. I have the latest drivers and software for both nvidia and boinc, downloaded 2 days ago, and I am using seti@home. Is there a way to "turn on" or check to see if boinc is in fact using my GPU? It seems to be idle, but I don't know how to check to be positive. Again, can we have a Link to that Host?, can't see what tasks it's done and what apps it's using. Claggy |
1097)
Message boards :
BOINC client :
BOINC 6.6.2 doesnt find GPU anymore
(Message 24140)
Posted 6 Apr 2009 by Claggy Post: I have the latest boinc and nvidia drivers and software but I can't get seti@home to use the GPU. I don't think boinc is identifying it. I am running 4 processes but on a quad core processor and the gpu remains at idle speeds. Can we have a link to that host please. Claggy |
1098)
Message boards :
Questions and problems :
6.6.12:Hostname missing in boincview
(Message 23588)
Posted 10 Mar 2009 by Claggy Post: I reported to the Boinc_alpha mailing list about the hosts details not showing up in BoincView 1.4.2 with Boinc 6.6.12, and they've fixed it for Boinc 6.6.14, see BOINC 6 Versions Change Log Claggy |
1099)
Message boards :
BOINC client :
6.4.5.0 not obeying preferences.
(Message 23421)
Posted 3 Mar 2009 by Claggy Post: I may be missing somethhing here as its some time since I have used BOINC. I have one PC with 6.2.19.0 running fine and obeying prefs. I have another with the current distro 6.4.5.0 running but not obeying prefs. In fact the latter says it has read the prefs override file which sort of indicates that prefs will never be obeyed? I do not see a local override file. What is happening please? You can clear the local preferences by clicking: Advanced, Preferences..., Clear, then Yes. Claggy |
1100)
Message boards :
Questions and problems :
nvlddmkm.sys bsod when running BOINC tasks
(Message 23253)
Posted 23 Feb 2009 by Claggy Post: I haven't seen any mention if your processor is overclocked, or what Model your Power Supply is or it's wattage, it's quite possible that it's getting tripped over the edge when doing work on the CPU and GPU, My 9800GTX+ says a minimum of 24A on the 12V line, expect your GTX280 to need more. Claggy |
1101)
Message boards :
Questions and problems :
Boinc 6.6.2
(Message 22518)
Posted 20 Jan 2009 by Claggy Post: No it Changed half way down the tasks screen from one format to the other, and is back to normal under 6.4.5 Claggy |
1102)
Message boards :
Questions and problems :
Boinc 6.6.2
(Message 22515)
Posted 20 Jan 2009 by Claggy Post: Be glad you got work. Mine is doing the 0.00 seconds, 0 instances routine on all projects and my cache is slowly going to be non-existent. ;-) Thanks, also the report deadlines from 6.4.5 were in British format, but suddenly all the new work's deadlines were about face, and changed to the US format. See my earlier post, all the dates should read 19/01/09 Claggy Edit: My GPU only has 128Mb RAM, so unable to run Cuda on Seti / Seti Beta, I use an app_info for AK_V8 and AP optimised on Seti Main. please see my earlier post in this thread Designtate different projects for CPU and GPU? Edit 2: at the moment i'm running stock 6.03 on Beta to try and get rid of some WU's so i get a more varied selection of AR's |
1103)
Message boards :
Questions and problems :
Boinc 6.6.2
(Message 22510)
Posted 19 Jan 2009 by Claggy Post: I was having a look in the Boinc download directory, and saw Boinc 6.6.2 there, so on a whim i downloaded and installed it, one slight problem, i'm now the proud owner of 21 Fresh Astropulse from Seti Main, and number of Multibeam, this is what my log said, after i had already set NNT, and clicked update: 01/19/09 22:25:47|SETI@home|Sending scheduler request: Requested by user. 01/19/09 22:25:47|SETI@home|CPU work request: 0.00 seconds, 0 instances 01/19/09 22:25:47|SETI@home|CUDA work request: 0.00 seconds, 0 instances 01/19/09 22:25:53|SETI@home|Scheduler request completed: got 20 new tasks I won't let it connect again, and I'm going back to 6.4.5 Claggy |
1104)
Message boards :
BOINC client :
Designtate different projects for CPU and GPU?
(Message 22487)
Posted 16 Jan 2009 by Claggy Post: I think it is more that the task needs to be designated as a CPU and/or GPU task, and that it should be switchable from one to the other. I presently Beta testing Seti@home 6.08 Cuda, my PC is a Dual Core Laptop with Windows Vista 32Bit, Boinc 6.4.5, and a 8400M GS with 128Mb, (179.28) I am using an app_info to over come a server side restriction on slow GPU's, but because my GPU doesn't have enough ram, (255Mb needed), it goes into CPU fallback mode, and runs on the CPU instead (but slowly, no optimisations yet), that means on this dual core, i have two cpu tasks running, and a GPU task that is really a CPU task!, because of this i've had to use a cc_config.xml file to limit my CPU's available to one, so running one CPU and one GPU on a CPU task. But this version of Boinc acts strange, this afternoon it decided to now only use one core, ie Seti Beta, if you suspend that project it then goes into high priorty on lhc@home, and to get it to run on two cores again you have to set the cc_config.xml back to two, so now it's running lhc and Einstein both normally without a GPU on CPU fallback task running. Boinc should be aware enough that a GPU task might end up running on the CPU instead, and make allowances for it, so doesn't try and run too many tasks on the CPU, or too few. Claggy |
1105)
Message boards :
BOINC client :
5.9.x problem reports
(Message 9896)
Posted 25 Apr 2007 by Claggy Post: Boinc Crashed again, this time when i pulled my wireless dongle out of my USB socket on the front of the PC. Same error codes as before. O.K, there's nothing in 'stderrdae.txt', just old stuff, my last Application Error was at 15:54:16, in 'stdoutdae.old' i have: 2007-04-24 15:54:07 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858778; active 0.999533; conn 0.005986 2007-04-24 15:54:18 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858780; active 0.999533; conn -1.000000 2007-04-24 15:54:29 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858782; active 0.999533; conn -1.000000 2007-04-24 15:54:40 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858783; active 0.999533; conn -1.000000 2007-04-24 15:54:51 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858785; active 0.999533; conn -1.000000 2007-04-24 15:55:02 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858787; active 0.999533; conn -1.000000 2007-04-24 15:55:13 [---] [time_debug] dt 11.000000 w2 0.999987 on 0.858789; active 0.999533; conn -1.000000 at 15:54:18 it's logged my connection as -1.000000, i assume that means no connection, in 'stdoutgui.txt' just before i restarted boincmanager i have 'send: -1' five times. What other flag's should i enable? I'm using BoincView. Claggy |
1106)
Message boards :
BOINC client :
5.9.x problem reports
(Message 9885)
Posted 25 Apr 2007 by Claggy Post: Boinc Crashed again, this time when i pulled my wireless dongle out of my USB socket on the front of the PC. Same error codes as before. Claggy. |
1107)
Message boards :
BOINC client :
5.9.x problem reports
(Message 9870)
Posted 23 Apr 2007 by Claggy Post: It comes up with a windows error report Event Type: Error Event Source: Application Error Event Category: None Event ID: 1000 Date: 22/04/2007 Time: 21:35:08 User: N/A Computer: A7N8X Description: Faulting application boinc.exe, version 5.9.4.0, faulting module msvcr80.dll, version 8.0.50727.762, fault address 0x00008a8c. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 41 70 70 6c 69 63 61 74 Applicat 0008: 69 6f 6e 20 46 61 69 6c ion Fail 0010: 75 72 65 20 20 62 6f 69 ure boi 0018: 6e 63 2e 65 78 65 20 35 nc.exe 5 0020: 2e 39 2e 34 2e 30 20 69 .9.4.0 i 0028: 6e 20 6d 73 76 63 72 38 n msvcr8 0030: 30 2e 64 6c 6c 20 38 2e 0.dll 8. 0038: 30 2e 35 30 37 32 37 2e 0.50727. 0040: 37 36 32 20 61 74 20 6f 762 at o 0048: 66 66 73 65 74 20 30 30 ffset 00 0050: 30 30 38 61 38 63 0d 0a 008a8c.. The other times were 22.51 & 23.10, which is a little more than the time between checkpoints, i hadn't noticed it the first time, and the other times i went back to check. I had installed it at 10.17 on the 22nd, and it had ran O.K in the morning, then i played a game in the afternoon, and fired Boinc up later in the afternoon. It's been running almost 2 hours now since reinstalling it, with no problems. Claggy |
1108)
Message boards :
BOINC client :
5.9.x problem reports
(Message 9865)
Posted 23 Apr 2007 by Claggy Post: I've had the Boinc Core Client on Boinc 5.9.4 Crash on me 3 times today while crunching CPDN, It comes up with a windows error report, Each time i've shut boinc manager down & restarted it, and it lasted another 10-15 minutes, I've returned to 5.9.3 and all is well. I'll reinstall 5.9.4 and see what the reports say. Windows XP Pro Athlon XP3200 1 Gig PC3200 Claggy |
Copyright © 2024 University of California.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software Foundation.